The document provides instructions for disassembling and assembling the steering planetary and brake of a D6T track-type tractor. It describes 24 steps to disassemble the components, including removing bolts, pins, gears, and seals. It then describes 25 steps to reassemble the components in reverse order, applying sealant and torqueing bolts to the specified values. Personal injury warnings are provided throughout regarding spring-loaded parts.
The document provides instructions for disassembling and assembling the steering planetary and brake components of a D6T LGP track-type tractor. The disassembly procedure involves removing 24 bolts and components including the planetary group, brake, ring gear, friction discs, piston, springs and seals. The assembly procedure outlines 25 steps for installing these same components and associated bearings, seals, shims and bolts in the reverse order of disassembly.
The document provides instructions for disassembling and assembling the steering planetary and brake components of a D6T LGP track-type tractor. The disassembly procedure involves removing 24 bolts and components including the planetary group, brake, ring gear, friction discs, piston, springs and seals. The assembly procedure outlines 25 steps for installing these same components and associated bearings, seals, shims and bolts in the reverse order of disassembly.
This document provides instructions for disassembling and assembling the steering planetary and brake components of a D6T LGP track-type tractor. The disassembly procedure involves removing 24 components including bolts, rings, gears, plates, and seals. The assembly procedure describes installing these components in 25 steps, noting proper orientation and torque specifications. Tools required include link brackets, drivers, and forcing bolts.
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
The document provides instructions for disassembling and assembling the main hydraulic pump of a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and bearings. It then lists 36 steps for assembly, replacing components and using tools to set specifications like the lift-off limitation. Precautions are provided to prevent contamination and release of spring forces during the process.
This document provides instructions for assembling the main hydraulic pump of an excavator model. It lists 49 steps and includes illustrations of each step. The steps include installing various parts like bearings, seals, pistons, springs, and valves. Tools needed are also listed. The summary concludes by stating to install the main hydraulic pump by referring to another section of the repair manual.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include:
1. Removing the right side console cover and disconnecting control rods and oil lines from the valve.
2. Removing bolts to take the valve off its mounting bracket.
3. Installing the valve by connecting oil lines and control rods and securing it with bolts back on the bracket.
The document provides instructions for disassembling and assembling the steering planetary and brake components of a D6T LGP track-type tractor. The disassembly procedure involves removing 24 bolts and components including the planetary group, brake, ring gear, friction discs, piston, springs and seals. The assembly procedure outlines 25 steps for installing these same components and associated bearings, seals, shims and bolts in the reverse order of disassembly.
The document provides instructions for disassembling and assembling the steering planetary and brake components of a D6T LGP track-type tractor. The disassembly procedure involves removing 24 bolts and components including the planetary group, brake, ring gear, friction discs, piston, springs and seals. The assembly procedure outlines 25 steps for installing these same components and associated bearings, seals, shims and bolts in the reverse order of disassembly.
This document provides instructions for disassembling and assembling the steering planetary and brake components of a D6T LGP track-type tractor. The disassembly procedure involves removing 24 components including bolts, rings, gears, plates, and seals. The assembly procedure describes installing these components in 25 steps, noting proper orientation and torque specifications. Tools required include link brackets, drivers, and forcing bolts.
The document suggests that if clicking the above button is invalid, the user should first download the document and then click the link to download the complete manual. It thanks the reader for their time.
The document provides instructions for disassembling and assembling the main hydraulic pump of a M315D Wheeled Excavator. It lists 34 steps for disassembly, removing components like pistons, springs, seals and bearings. It then lists 36 steps for assembly, replacing components and using tools to set specifications like the lift-off limitation. Precautions are provided to prevent contamination and release of spring forces during the process.
This document provides instructions for assembling the main hydraulic pump of an excavator model. It lists 49 steps and includes illustrations of each step. The steps include installing various parts like bearings, seals, pistons, springs, and valves. Tools needed are also listed. The summary concludes by stating to install the main hydraulic pump by referring to another section of the repair manual.
The document provides instructions for installing a swing drive on an excavator model M315D. It lists the required tools and parts. The procedure involves 28 steps, including installing bearings, seals, gears, and other components into the swing drive housing. Specific torque specifications and dimensional checks are listed to ensure proper assembly. Installation is completed by positioning the swing drive in the swing brake housing and securing it with bolts.
This document provides instructions for removing and installing a pilot control valve on a D10 track-type tractor. Key steps include:
1. Removing the right side console cover and disconnecting control rods and oil lines from the valve.
2. Removing bolts to take the valve off its mounting bracket.
3. Installing the valve by connecting oil lines and control rods and securing it with bolts back on the bracket.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
1) The document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor.
2) It describes using various tools to remove over 30 components of the final drive including gears, shafts, seals, and hubs.
3) Precautions are included when using hydraulic cylinders and heated components to disassemble pieces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It also explains how to reinstall these parts in reverse order.
3) Fourteen steps are outlined for removal and thirteen steps for installation, ensuring proper alignment of parts and torquing of bolts.
The document provides instructions for disassembling and assembling the steering clutch and brake of a D7R track-type tractor. It describes 20 steps to disassemble the components and 19 steps to reassemble them. These include removing plates, seals, springs, and other parts, and replacing them in the reverse order. Tools required include link brackets and a driver group. Proper spring loading and seal installation are emphasized.
This document provides instructions for assembling and installing the final drive on a D7R track-type tractor. It describes 31 steps for assembly, including installing seals, bearings, gears, shafts and covers. For installation, it outlines 10 steps such as positioning the final drive, installing bolts, filling it with oil and reconnecting the track. The document contains diagrams to illustrate each step in the process.
Caterpillar Cat D7R II WATER FORDING TRACTOR (Prefix DJT) Service Repair Manu...ze3xiandiao
This document provides instructions for disassembling and assembling the steering planetary and brake of a D7R Series II Water Fording Tractor. It describes removing 24 components including the planetary group, brake, ring gear, friction discs, piston, and springs. Reassembly involves installing these components in reverse order, noting proper orientation and torque specifications. Tools required include link brackets, a driver group, forcing bolts, and sealant.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...ze3xiandiao
The document provides instructions for removing a final drive, steering planetary, and brake assembly from a D7R II track-type tractor. It describes using lifting brackets, shackles, bolts and nuts to attach a hoist to the assembly and remove it from the tractor. The assembly weighs approximately 800 kg (1750 lb) and precautions are listed to provide means to stop the machine without the brake installed. Fluids must be contained while working on components to collect any fluids that may drain out.
The document provides instructions for disassembling and assembling the final drives of a D7H track-type tractor. Key steps include removing the final drives from the tractor frame using specialized tools, then disassembling the internal components like planet carriers, gears, shafts, and seals. Reassembly involves heating bearings, installing seals and bearings using presses and tools, and reattaching the final drives to the frame. Precautions are noted to prevent damage to seals during axle removal and installation.
This document provides instructions for servicing the final drives on a D7H track-type tractor. It describes how to remove and disassemble the final drives, including removing the planet carriers, gears, shafts and other components. It then describes how to assemble the final drives, including installing bearings, seals, rings and other parts back into the hubs and carriers. The goal is to provide maintenance technicians with step-by-step directions for servicing these critical components.
1) The document provides instructions for removing and installing pistons, connecting rods, connecting rod bearings, and crankshaft main bearings for a Caterpillar 3306 engine.
2) The procedure involves using tools to compress piston rings, installing pistons and connecting rods onto the crankshaft, checking clearances of connecting rod bearings, and removing/installing main bearing caps.
3) Technicians are advised to keep all parts clean and lubricated with engine oil to prevent damage and wear.
The document provides instructions for removing final drive cases, gears, idler pinions and bearings from a D7G track-type tractor. The steps include:
1) Removing bolts holding the final drive case in position.
2) Installing guide bolts and forcing screws to separate the final drive case from the steering clutch case.
3) Using wire to hold the idler pinion in place so the planet carrier does not fall when the final drive case is removed.
The document provides step-by-step instructions for removing and installing sprocket assemblies on a final drive case. It involves draining the oil, removing the sprocket and various components using specialized tools, cleaning seals and surfaces, and installing the new sprocket along with bearings, seals, and other parts in reverse order. Precise measurements and torque specifications are listed to ensure proper installation.
The document provides instructions for removing and installing sprocket assemblies on a direct drive final drive. The key steps include:
1. Draining the oil and removing the sprocket, holder assembly, seals, bearings and other components.
2. Cleaning surfaces and installing new seals before pressing the sprocket onto the hub using a hydraulic press.
3. Reassembling the holder assembly by installing bearings, seals, and adjusting nut then attaching it to the sprocket shaft.
This document provides instructions for removing and installing the engine in a D7F track-type tractor model 94N. The removal process involves draining fluids, disconnecting wiring harnesses and fluid lines, and removing mounting hardware. The engine can then be lifted out of the tractor body. Installation is the reverse of removal, reconnecting all fluid lines, wiring, and securing the engine with mounting hardware. Proper lubrication and adjustment of components is also specified.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a D7F track-type tractor, including:
1) Disassembling and assembling the governor, removing and installing fuel check valves and bypass valves, and removing and installing fuel injection pumps.
2) Detailed steps are provided for removing each part and reinstalling them in the proper order.
3) Precautions are outlined, such as ensuring parts are kept with their respective barrels during disassembly and reinstallation.
This document provides instructions to disassemble and assemble the final drive of a D7E track-type tractor. It details 31 steps to disassemble the various components of the final drive including gears, bearings, seals and housings. It then details 22 steps for reassembling the components, noting specific tools and procedures needed such as heating bearings to specific temperatures before installation.
This document provides assembly and disassembly instructions for a D7E track-type tractor final drive. It describes how to assemble the final drive components using various tools, including installing bearings and seals, attaching housing and gear assemblies that weigh up to 880 kg, and tightening bolts to specified torques. The instructions are presented over 29 steps in a precise, sequential order.
This document provides assembly and disassembly instructions for the final drive of a D7E track-type tractor. It involves 29 steps including installing bearings and seals, attaching various components using lifting tools due to component weights up to 880 kg, and torquing bolts to specified values. The instructions are accompanied by illustrations for each step.
The document provides instructions for disassembling and assembling a recoil cylinder. Key steps include:
1. Removing the recoil cylinder and various components like bolts, guards, valves, and seals.
2. Inspecting parts and cleaning components as needed.
3. Reassembling the recoil cylinder by reinstalling components in reverse order and applying lubricants and seals. Precise torques are specified.
4. The process involves over 20 numbered steps and utilizes various specialized tools to properly disassemble and reassemble the recoil cylinder.
This document provides instructions for disassembling and assembling the final drive of a D9R track-type tractor. It describes removing components such as the planetary carrier, gears, shafts, and hub. Various tools are required, including link brackets, a push-puller tool group, driver group, and hydraulic cylinder assembly. Precautions are given for using hydraulic cylinders and puller studs during disassembly. The multi-step process includes pressing, lifting, and removing components from the planetary carrier, sun gear, and hub.
1) The document provides instructions to disassemble and assemble the final drive of a D9R track-type tractor.
2) It describes using various tools to remove over 30 components of the final drive including gears, shafts, seals, and hubs.
3) Precautions are included when using hydraulic cylinders and heated components to disassemble pieces.
1) The document provides instructions for removing and installing the final drive planetary carrier in a D9R track-type tractor.
2) It describes using various tools to remove the carrier, hub components, seals, and gears. It also explains how to reinstall these parts in reverse order.
3) Fourteen steps are outlined for removal and thirteen steps for installation, ensuring proper alignment of parts and torquing of bolts.
The document provides instructions for disassembling and assembling the steering clutch and brake of a D7R track-type tractor. It describes 20 steps to disassemble the components and 19 steps to reassemble them. These include removing plates, seals, springs, and other parts, and replacing them in the reverse order. Tools required include link brackets and a driver group. Proper spring loading and seal installation are emphasized.
This document provides instructions for assembling and installing the final drive on a D7R track-type tractor. It describes 31 steps for assembly, including installing seals, bearings, gears, shafts and covers. For installation, it outlines 10 steps such as positioning the final drive, installing bolts, filling it with oil and reconnecting the track. The document contains diagrams to illustrate each step in the process.
Caterpillar Cat D7R II WATER FORDING TRACTOR (Prefix DJT) Service Repair Manu...ze3xiandiao
This document provides instructions for disassembling and assembling the steering planetary and brake of a D7R Series II Water Fording Tractor. It describes removing 24 components including the planetary group, brake, ring gear, friction discs, piston, and springs. Reassembly involves installing these components in reverse order, noting proper orientation and torque specifications. Tools required include link brackets, a driver group, forcing bolts, and sealant.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...ze3xiandiao
The document provides instructions for removing a final drive, steering planetary, and brake assembly from a D7R II track-type tractor. It describes using lifting brackets, shackles, bolts and nuts to attach a hoist to the assembly and remove it from the tractor. The assembly weighs approximately 800 kg (1750 lb) and precautions are listed to provide means to stop the machine without the brake installed. Fluids must be contained while working on components to collect any fluids that may drain out.
The document provides instructions for disassembling and assembling the final drives of a D7H track-type tractor. Key steps include removing the final drives from the tractor frame using specialized tools, then disassembling the internal components like planet carriers, gears, shafts, and seals. Reassembly involves heating bearings, installing seals and bearings using presses and tools, and reattaching the final drives to the frame. Precautions are noted to prevent damage to seals during axle removal and installation.
This document provides instructions for servicing the final drives on a D7H track-type tractor. It describes how to remove and disassemble the final drives, including removing the planet carriers, gears, shafts and other components. It then describes how to assemble the final drives, including installing bearings, seals, rings and other parts back into the hubs and carriers. The goal is to provide maintenance technicians with step-by-step directions for servicing these critical components.
1) The document provides instructions for removing and installing pistons, connecting rods, connecting rod bearings, and crankshaft main bearings for a Caterpillar 3306 engine.
2) The procedure involves using tools to compress piston rings, installing pistons and connecting rods onto the crankshaft, checking clearances of connecting rod bearings, and removing/installing main bearing caps.
3) Technicians are advised to keep all parts clean and lubricated with engine oil to prevent damage and wear.
The document provides instructions for removing final drive cases, gears, idler pinions and bearings from a D7G track-type tractor. The steps include:
1) Removing bolts holding the final drive case in position.
2) Installing guide bolts and forcing screws to separate the final drive case from the steering clutch case.
3) Using wire to hold the idler pinion in place so the planet carrier does not fall when the final drive case is removed.
The document provides step-by-step instructions for removing and installing sprocket assemblies on a final drive case. It involves draining the oil, removing the sprocket and various components using specialized tools, cleaning seals and surfaces, and installing the new sprocket along with bearings, seals, and other parts in reverse order. Precise measurements and torque specifications are listed to ensure proper installation.
The document provides instructions for removing and installing sprocket assemblies on a direct drive final drive. The key steps include:
1. Draining the oil and removing the sprocket, holder assembly, seals, bearings and other components.
2. Cleaning surfaces and installing new seals before pressing the sprocket onto the hub using a hydraulic press.
3. Reassembling the holder assembly by installing bearings, seals, and adjusting nut then attaching it to the sprocket shaft.
This document provides instructions for removing and installing the engine in a D7F track-type tractor model 94N. The removal process involves draining fluids, disconnecting wiring harnesses and fluid lines, and removing mounting hardware. The engine can then be lifted out of the tractor body. Installation is the reverse of removal, reconnecting all fluid lines, wiring, and securing the engine with mounting hardware. Proper lubrication and adjustment of components is also specified.
This document provides instructions for removing and installing various components of a D7F track-type tractor engine. The components include the timing gear cover, camshaft, flywheel, crankshaft rear seal, power take-off drive gears and bearings, and removing the entire engine. Detailed steps are provided for each component, including preparatory steps, individual installation and removal steps, and concluding steps.
This document provides instructions for disassembling and assembling components of a sleeve metering fuel system for a D7F track-type tractor, including:
1) Disassembling and assembling the governor, removing and installing fuel check valves and bypass valves, and removing and installing fuel injection pumps.
2) Detailed steps are provided for removing each part and reinstalling them in the proper order.
3) Precautions are outlined, such as ensuring parts are kept with their respective barrels during disassembly and reinstallation.
This document provides instructions to disassemble and assemble the final drive of a D7E track-type tractor. It details 31 steps to disassemble the various components of the final drive including gears, bearings, seals and housings. It then details 22 steps for reassembling the components, noting specific tools and procedures needed such as heating bearings to specific temperatures before installation.
This document provides assembly and disassembly instructions for a D7E track-type tractor final drive. It describes how to assemble the final drive components using various tools, including installing bearings and seals, attaching housing and gear assemblies that weigh up to 880 kg, and tightening bolts to specified torques. The instructions are presented over 29 steps in a precise, sequential order.
This document provides assembly and disassembly instructions for the final drive of a D7E track-type tractor. It involves 29 steps including installing bearings and seals, attaching various components using lifting tools due to component weights up to 880 kg, and torquing bolts to specified values. The instructions are accompanied by illustrations for each step.
The document provides instructions for disassembling and assembling a recoil cylinder. Key steps include:
1. Removing the recoil cylinder and various components like bolts, guards, valves, and seals.
2. Inspecting parts and cleaning components as needed.
3. Reassembling the recoil cylinder by reinstalling components in reverse order and applying lubricants and seals. Precise torques are specified.
4. The process involves over 20 numbered steps and utilizes various specialized tools to properly disassemble and reassemble the recoil cylinder.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
1. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T TRACK-TYPE TRACTOR JWD
Configuration: D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -KENR5126-07 Publication Date -01/01/2013 Date Updated -25/07/2018
i04905904
Steering Planetary and Brake - Disassemble
SMCS - 4132-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A 138-7575 Link Bracket 3
B 1P-0520 Driver Group 1
C 5B-4274 Forcing Bolt 3/8 - 16 by 3.5 inches 3
Start By:
A. Remove the right hand final drive, the planetary group, and the brake. Refer to Disassembly and
Assembly, "Final Drive, Steering Planetary, and Brake (Right Side) - Remove".
Illustration 1 g00622108
1. Position the final drive, the planetary group, and the brake, as shown.
2. Remove the bolts that hold the planetary group and brake (1) to final drive (2). The bolts are on the
bottom (not shown).
1/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
2. 3. Attach Tooling (A) and a suitable lifting device to the planetary group and brake.
4. Install Tooling (C) in the final drive hub.
5. Tighten the forcing screws evenly in order to remove the planetary group and brake (1) from final drive
(2). The weight of planetary group and brake (1) is approximately 136 kg (300 lb).
Illustration 2 g00622109
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
6. Remove bolts (3). Remove ring gear (4) from housing (5) .
Illustration 3 g00622110
7. Remove friction discs (6) and the brake plates from the housing.
2/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 4 g00622111
Illustration 5 g01205302
8. Remove bolts (7) and plate (8) .
9. Position the housing on suitable blocks (11) .
Note: Do not allow planetary carrier (10) to fall when the carrier is pressed from housing (5) .
Note: If a shim pack is present between the plate (8) and planetary carrier (10). Reuse the same shim pack
during assembly only if reusing the same planetary carrier (10). If a new planetary carrier (10) is being
used the shim pack should be discarded.
10. Use Tooling (B) and a suitable press to remove planetary carrier (10) from housing (5) .
11. Remove bearing cone (9) from the housing.
Illustration 6 g01205303
3/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 12. Remove ring (14) from planetary carrier (10). Remove bolts (13). Remove slinger (12) from the planetary
carrier.
NOTICE
The component is destroyed if the component is removed.
13. If necessary, remove bearing cone (15) from planetary carrier (10) .
Illustration 7 g00622128
14. Use a hammer and a punch to push pin (17) in shaft (16) .
Illustration 8 g01205304
15. Remove shaft (16), planetary gear (19), discs (20), and bearings (21) from planetary carrier (10) .
16. Remove pin (17) from shaft (16) .
17. Repeat Steps 14 through 16 for the remaining planetary gears.
18. Remove sun gear (18) from planetary carrier (10) .
4/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 9 g00622132
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
19. Remove bolts (22) and washers.
20. Remove retainer (23) from piston (24) .
Illustration 10 g00622155
21. If necessary, remove bearing cups (25) and seal ring (26) from retainer (23) .
5/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 11 g00622156
22. Remove piston (24) and O-ring seal (27) from the housing.
Illustration 12 g00622157
23. Remove seal ring (28) from piston (24) .
Note: Inspect the O-ring seals. If necessary, replace the O-ring seals.
Illustration 13 g00819345
24. Remove spring (29) and ring (30) from housing (5) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Apr 28 17:49:47 UTC+0800 2021
6/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T TRACK-TYPE TRACTOR JWD
Configuration: D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -KENR5126-07 Publication Date -01/01/2013 Date Updated -25/07/2018
i07321002
Steering Planetary and Brake - Assemble
SMCS - 4132-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A 138-7575 Link Bracket 3
D 6V-6640 Sealant 1
Reference: Refer to Specifications, "Brake and Planetary"
in the Service Manual for your machine.
Illustration 1 g00819345
Note: Orient the disc spring with the outer edge downward.
1. Install ring (30) and spring (29) in housing (5).
1/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 2 g00622157
2. Apply clean oil to seal ring (28).
Note: Orient the seal ring with the lip downward. Refer to Illustration 2.
3. Install seal ring (28) in piston (24).
Illustration 3 g00622156
4. Install piston (24) and O-ring seal (27) in the housing.
Illustration 4 g00622155
5. Lower the temperature of bearing cups (25). Install bearing cups (25) in retainer (23).
Note: Orient the seal ring with the lip downward. Refer to Illustration 4.
6. Apply clean oil to seal ring (26). Install seal ring (26) in retainer (23).
2/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 5 g00622132
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
7. Install retainer (23) on piston (24). Align the oil passage in retainer (23) with the oil passage and the O-
ring seal in the housing. Install bolts (22).
Illustration 6 g01205304
8. Install sun gear (18) in planetary carrier (10).
9. Install bearings (21) in planetary gear (19).
10. Install discs (20) and planetary gear (19) in planetary carrier (10). Install shaft (16).
3/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 7 g00622128
Note: If the rubber in pin (17) is damaged, replace pin (17).
11. Align the hole in shaft (16) with the hole in planetary carrier (10) and install pin (17). Install pin (17) until
the pin is even with the surface of planetary carrier (10).
12. Repeat Steps 9 through 11 for the remaining planetary gears.
Illustration 8 g01205303
Note: If bearing cone (15) was removed from planetary carrier (10), a new bearing must be installed.
13. Raise the temperature of bearing cone (15). Install the bearing cone on planetary carrier (10).
14. Apply Tooling (D) to the flange of slinger (12).
15. Install slinger (12) on planetary carrier (10). Install bolts (13) and tighten to a torque of 25 ± 6 N·m
(221 ± 53 lb in).
16. Install ring (14) in planetary carrier (10).
4/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 9 g01205389
17. Position housing (5) on planetary carrier (10).
Note: Install shim pack between plate and planetary carrier (10) , only if there was a shim pack originally
installed in the differential group and if the same planetary carrier (10) is being reused. shim pack
thickness should be 0.31 mm (0.0122 inch).
18. Raise the temperature of bearing cone (9). Install bearing cone (9) on planetary carrier (10).
Illustration 10 g00818972
19. Position plate (8) on the planetary carrier.
20. Install bolts (7).
Illustration 11 g00622110
21. Install friction discs (6) and brake plates. Alternate the friction discs and the brake plates.
Illustration 12 g00622109
5/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 22. Position ring gear (4) on housing (5).
23. Install bolts (3). Tighten the bolts to a torque of 135 ± 20 N·m (100 ± 15 lb ft).
Illustration 13 g00622108
24. Use a suitable lifting device and Tooling (A) to position the planetary group and brake (1) on final drive
(2). The weight of the planetary group and brake is approximately 135 kg (300 lb).
25. Install the bolts that hold the planetary group and brake on the final drive.
End By:
a. Install the right-hand final drive, the planetary group, and the brake. Refer to Disassembly and Assembly,
"Final Drive, Steering Planetary, and Brake (Right Side) - Install"
.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Apr 28 17:50:46 UTC+0800 2021
6/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T TRACK-TYPE TRACTOR JWD
Configuration: D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -KENR5126-07 Publication Date -01/01/2013 Date Updated -25/07/2018
i02616812
Final Drive, Steering Planetary, and Brake (Right Side) - Install
SMCS - 4050-012-RI; 4132-012-RI
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-3207 Lift Bracket 1
Illustration 1 g00870631
Illustration 2 g01310295
1/2
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 3 g00870633
1. Install Tooling (A). Adjust Tooling (A) so the hook is 76 mm (3.0 inch) from the end of the bracket.
Install the final drive, the steering clutch, and brake (3). The weight of the final drive, the steering clutch,
and brake (3) is approximately 590 kg (1300 lb).
2. Install bolts (2). Tighten bolts (2) to a torque of 800 ± 90 N·m (590 ± 66 lb ft). Install bolts (1).
3. Remove Tooling (A). Install two sprocket segment bolts.
End By:
a. Install the axle. Refer to Disassembly and Assembly, "Axle - Remove and Install".
b. Connect the track. Refer to Disassembly and Assembly, "Track - Connect".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Apr 28 17:51:46 UTC+0800 2021
2/2
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T TRACK-TYPE TRACTOR JWD
Configuration: D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -KENR5126-07 Publication Date -01/01/2013 Date Updated -25/07/2018
i02616829
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1952 Axle Removal Tool 1
B
8T-3207 Lifting Bracket 1
5P-8622 Shackle 1
2D-4593 5/8 - 11 by 5 1/2 inch 2
1B-4331 5/8 - 11 inch 2
2S-5658 Washer 4
Start By:
a. Separate the track. Refer to Disassembly and Assembly, "Track - Separate".
Note: The planetary carriers of the final drives can be removed directly from the machine. Refer to Disassembly
and Assembly, "Final Drive Planetary Carrier (In Chassis) - Remove".
Without the sun gear in place, the brakes are ineffective. Personal
injury or death could result. Provide other means to hold or stop the
machine.
NOTICE
1/4
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00865052
1. Remove bolts (2) and cover (3) from final drive (1).
Illustration 2 g00865024
2. Use Tooling (A) to remove axle (4).
2/4
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 3 g00865075
3. Remove two bolts (5).
Illustration 4 g00826743
4. Adjust the top bracket of Tooling (B) until Dimension (X) is 222.25 mm (8.750 inch).
Illustration 5 g00865077
5. Remove two bolts (6) from the sprocket segment.
Illustration 6 g00865082
6. Fasten Tooling (B) and a suitable lifting device to the final drive.
3/4
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 7 g00865094
7. Remove bolts (7) that hold the final drive and the brake together.
Illustration 8 g00865095
8. Use Tooling (B) to remove final drive (1) from the machine. The weight of final drive (1) is
approximately 454 kg (1000 lb).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Apr 28 17:52:45 UTC+0800 2021
4/4
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T TRACK-TYPE TRACTOR JWD
Configuration: D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -KENR5126-07 Publication Date -01/01/2013 Date Updated -25/07/2018
i05236991
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7573 Link Bracket 3
1A-2029 Bolt 1
B 1P-510 Driver Group 1
C
FT-1934 Beam 1
6V-3160 Double Acting Cylinder 1
6V-9061 Pump Group 1
1D-4621 Bolt 4
D
138-7574 Link Bracket 2
2A-1538 Bolt 2
Start By:
A. Remove the final drives. Refer to Disassembly and Assembly, "Final Drive - Remove" for the correct
procedure.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component
should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
1/5
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 1 g01195912
1. Install Tooling (A) and a suitable lifting device to planetary carrier (3) .
2. Remove bolts (1). Remove planetary carrier (3) and the two O-ring seals from the hub. The weight of
planetary carrier (3) is approximately 137 kg (302 lb).
3. Remove retainers (2) .
Illustration 2 g00841089
4. Place support under planetary carrier (3) in order to prevent damage. Use Tooling (B) and a suitable press
to remove the planetary gear shafts.
5. Remove planetary gears (4) from planetary carrier (3) .
2/5
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 3 g00841091
6. Remove bearing cones (5) from gears (4) .
7. Remove the bearing cups from each side of the gears.
Illustration 4 g00841092
Illustration 5 g01195913
8. Remove bolts (6) and retainer (7) .
9. Attach a suitable lifting device to hub (12) and ring gear (8). The weight of hub (12) and ring gear (8) is
approximately 68 kg (150 lb). Remove hub (12) and ring gear (8) .
3/5
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 6 g01195915
10. Turn over hub (9) and ring gear (8). Remove retaining ring (10). Attach a suitable lifting device to hub
(9). The weight of hub (9) is approximately 37 kg (82 lb). The weight of ring gear (8) is approximately 32
kg (71 lb). Remove hub (9) .
Illustration 7 g00841095
11. Install Tooling (C) on hub (12).
Note: Do not lift hub (12) too high. Do not allow hub (12) to contact the fitting on the hydraulic cylinder.
12. Use Tooling (C) to loosen hub (12) from spindle (13). Remove Tooling (C) .
13. Remove bearing cone (11) .
Illustration 8 g01195917
4/5
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 14. Install Tooling (D) and a suitable lifting device to hub (12). Remove hub (12) from spindle (13). The
weight of hub (12) is approximately 180 kg (397 lb).
Illustration 9 g00841099
15. Turn over hub (12). Remove Duo-Cone seal kit (15). Use a hammer and a punch to remove bearing cup
(16) .
16. Turn over the hub. Remove bearing cup (14) from the hub.
Note: If the Duo-Cone seal will be reused, mark the seal kits for installation purposes.
Illustration 10 g00841101
Note: Bearing cone (18) may be damaged if the bearing cone is removed from spindle (13) .
17. Remove Duo-Cone seal (19) from spindle (13) .
18. If necessary, remove bearing cone (18) from the spindle.
19. Remove lip seal (17) from spindle (13) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Apr 28 17:53:44 UTC+0800 2021
5/5
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T TRACK-TYPE TRACTOR JWD
Configuration: D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -KENR5126-07 Publication Date -01/01/2013 Date Updated -25/07/2018
i06701251
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7573 Link Bracket 3
1A-2029 Bolt 3
B 1P-0520 Driver Gp 1
D
138-7574 Link Bracket 2
2A-1538 Bolt 2
E 8M-9395 Installer 1
1. Apply clean oil to all the parts during assembly.
Illustration 1 g06081205
1/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 2. Use Tooling (B) to install lip seal (17) in spindle (13) to a depth of (X) 9 ± 0.25 mm
(0.3543 ± 0.0098 inch). Put clean oil on the lip of the seal.
Note: Dimension (X) is measured from the face of the spindle to the top of the metal can of the lip seal in
the orientation shown.
Note: Do not apply excessive force to lip seal (17) during installation to avoid damaging the seal.
Illustration 2 g00841209
3. Raise the temperature of bearing cone (18) to a maximum temperature of 135 °C (275 °F). Install bearing
cone (18) on spindle (13).
Note: Before the installation of the Duo-Cone seal, refer to Disassembly and Assembly, "Duo-Cone
Floating Seals - Install" for the correct procedure.
4. Use Tooling (E) to install the Duo-Cone seal on spindle (13).
Illustration 3 g00841210
5. Lower the temperature of bearing cups (14) and (16). Install bearing cups (14) and (16) in hub (12).
6. Use Tooling (E) to install the Duo-Cone seal in hub (12).
2/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 4 g01195917
7. Install Tooling (D) on hub (12). Attach a suitable lifting device to Tooling (D). Carefully position hub
(12) on spindle (13).
Illustration 5 g00841212
8. Raise the temperature of bearing cone (11). Install bearing cone (11) on spindle (13).
Illustration 6 g01195915
9. Attach a suitable lifting device to hub (9) and position hub (9) in ring gear (8). Install retaining ring (10).
3/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 7 g01195913
10. Turn over the hub (9) and ring gear (8). Attach a suitable lifting device to hub (9) and the ring gear (8)
into position in hub (12).
Illustration 8 g00841092
11. Put retainer (7) into position. Install bolts (6) while the hub is slowly rotated. Tighten bolts (6) evenly to a
torque of 135 ± 15 N·m (100 ± 11 lb ft). The retainer must contact the end of spindle (13) after bolts (6)
have been tightened.
Illustration 9 g00841213
12. Lower the temperature of bearing cups (20) and (21). Install the bearing cups in three planetary gears (4).
4/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 10 g00841215
Illustration 11 g00841216
13. Position the planetary carrier in a press. The shaft (22) must be in position with proper support to be a
positive stop for the shaft.
NOTICE
The shaft must be correctly installed. If the shaft is incorrectly
installed, the bearing preload will be incorrect. This will result in
component damage.
14. Position planetary gear (4) in the planetary carrier.
15. Lower the temperature of shaft (22). Use a suitable press to install the shaft in the planetary carrier. After
the installation, the end of shaft (22) must be flush with the retainer of the planetary carrier. This will
provide the correct bearing preload. The gear must rotate by hand after installation. If the gear does not
rotate, the problem must be corrected. Repeat this procedure for all three shafts.
5/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 12 g01195912
16. Install three retainers (2) on shafts (22).
17. Install Tooling (A). Attach a suitable lifting device to Tooling (A). Install the two O-ring seals on the
planetary carrier. Align the drain hole in the planetary carrier with the drain hole in the hub.
18. Position the planetary carrier in the hub.
19. Install bolts (1) that hold planetary carrier (3) to the hub. Remove Tooling (A).
End By:
a. Install the final drives. Refer to Disassembly and Assembly, "Final Drive - Install" for the correct
procedure.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Apr 28 17:54:43 UTC+0800 2021
6/6
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T TRACK-TYPE TRACTOR JWD
Configuration: D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering JWD00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -KENR5126-07 Publication Date -01/01/2013 Date Updated -25/07/2018
i03576221
Final Drive - Install
SMCS - 4050-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1952 Installer 1
B
8T-3207 Lifting Bracket 1
5P-8622 Shackle 1
1D-4593 5/8 - 11 by 5 1/2 bolt 2
4K-0367 5/8 - 11 by nut 2
5P-8248 Washer 4
Illustration 1 g00826743
1. Adjust the top bracket of Tooling (B) until Dimension (X) is 222.25 mm (8.750 inch). Attach Tooling (B)
to the final drive.
1/4
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
31. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
32. Illustration 2 g00865095
2. Use Tooling (B) to install final drive (1). The weight of final drive (1) is approximately 454 kg (1000 lb).
Illustration 3 g00865094
3. Install bolts (7) that hold the final drive and the steering clutch and brake together. Tighten bolts (7) to a
torque of 700 ± 90 N·m (516 ± 66 lb ft).
Illustration 4 g00865082
4. Remove Tooling (B) from the final drive.
2/4
D6T TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering J...
2021/4/28
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...