The document provides instructions for disassembling and assembling the steering planetary and brake components of a D6T LGP track-type tractor. The disassembly procedure involves removing 24 bolts and components including the planetary group, brake, ring gear, friction discs, piston, springs and seals. The assembly procedure outlines 25 steps for installing these same components and associated bearings, seals, shims and bolts in the reverse order of disassembly.
The document provides instructions for disassembling and assembling the steering planetary and brake of a D6N track-type tractor. The disassembly procedure involves removing 27 parts and components including the ring gear, friction discs, brake plates, planetary carrier, bearings, and seals. The assembly procedure outlines 25 steps for installing the parts in reverse order and provides notes on orientation, lubrication, and torque specifications.
The document provides instructions for disassembling and assembling the steering planetary and brake of a D6N track-type tractor. The disassembly procedure involves removing 27 parts including bolts, rings, gears, and bearings. The assembly procedure describes installing these parts in 25 steps, applying sealant or lubricant as needed and ensuring proper orientation of parts. Special tools are required for pressing and lifting some heavy components.
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
Volvo EC55-2 Compact Excavator Parts Catalogue Manual – SN 5001 - 7620.pdfjnnfnjsdnnd
This document contains specifications for various engine parts for a Volvo EC55-2 engine. It includes sections for the engine, cylinder head, valves, pistons, connecting rods, camshaft, and other components. Each section lists the relevant part numbers, descriptions, quantities, and other details. The document provides an extensive catalogue of replacement parts for this engine model.
Kubota B1241D-EC-F2-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA516...jnnfnjsdnnd
This document provides a parts list for frequently used items and their information. It includes 30 parts ranging from switches and fuses to hoses and filters. Each part is listed with its number, name in Polish and English, quantity, and other identifying information like serial number and weight. The document is copyrighted by KUBOTA in 2015.
Kubota B1700D Tractor Parts Catalogue Manual (Publishing ID BKIDK0093).pdfjnnfnjsdnnd
This document provides a parts list for a crankcase (Kurbelgehäuse) with part numbers, names, quantities, serial numbers, and other details. It lists over 200 individual part numbers. The parts are for various engine components, including the crankcase, oil pan, cylinder head, gear case, and head cover.
Kubota B1181DT-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA51...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 20 parts that make up the main bearing case assembly. Key components listed include the main bearing case group, bearing case cover, oil seal, gaskets, bolts, and bearing shells. The document also provides copyright information at the bottom of each page.
The document provides instructions for disassembling and assembling the steering planetary and brake of a D6N track-type tractor. The disassembly procedure involves removing 27 parts and components including the ring gear, friction discs, brake plates, planetary carrier, bearings, and seals. The assembly procedure outlines 25 steps for installing the parts in reverse order and provides notes on orientation, lubrication, and torque specifications.
The document provides instructions for disassembling and assembling the steering planetary and brake of a D6N track-type tractor. The disassembly procedure involves removing 27 parts including bolts, rings, gears, and bearings. The assembly procedure describes installing these parts in 25 steps, applying sealant or lubricant as needed and ensuring proper orientation of parts. Special tools are required for pressing and lifting some heavy components.
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
Volvo EC55-2 Compact Excavator Parts Catalogue Manual – SN 5001 - 7620.pdfjnnfnjsdnnd
This document contains specifications for various engine parts for a Volvo EC55-2 engine. It includes sections for the engine, cylinder head, valves, pistons, connecting rods, camshaft, and other components. Each section lists the relevant part numbers, descriptions, quantities, and other details. The document provides an extensive catalogue of replacement parts for this engine model.
Kubota B1241D-EC-F2-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA516...jnnfnjsdnnd
This document provides a parts list for frequently used items and their information. It includes 30 parts ranging from switches and fuses to hoses and filters. Each part is listed with its number, name in Polish and English, quantity, and other identifying information like serial number and weight. The document is copyrighted by KUBOTA in 2015.
Kubota B1700D Tractor Parts Catalogue Manual (Publishing ID BKIDK0093).pdfjnnfnjsdnnd
This document provides a parts list for a crankcase (Kurbelgehäuse) with part numbers, names, quantities, serial numbers, and other details. It lists over 200 individual part numbers. The parts are for various engine components, including the crankcase, oil pan, cylinder head, gear case, and head cover.
Kubota B1181DT-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA51...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 20 parts that make up the main bearing case assembly. Key components listed include the main bearing case group, bearing case cover, oil seal, gaskets, bolts, and bearing shells. The document also provides copyright information at the bottom of each page.
Kubota B1241D-EC-F Tractor Parts Catalogue Manual (Publishing ID BKIDA5131).pdfjnnfnjsdnnd
This document provides a list of parts for an engine. It includes the part numbers, names in Polish and English, quantities, and other specifications for 230 different engine parts organized into categories like crankcase, oil pan, cylinder head, gear case, and head cover. The parts range from bolts, nuts, and plugs to larger assemblies and components like the crankcase, cylinder head, and gear case.
Kubota B1181D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5129).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. It appears to be a comprehensive listing of components for a Kubota engine.
Kubota B1121D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 100 individual parts that make up the main bearing case assembly. The parts include the main bearing case group, bolts, pins, seals, gaskets, covers, and bearings.
Kubota B1161D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a list of parts for a Kubota engine crankcase assembly. It includes 140 individual parts with information on part numbers, names, quantities, and other specifications. The crankcase assembly consists of a composite crankcase component as the main part, along with various caps, plugs, pins, bolts, and other fittings that make up the full assembly. Safety precautions are noted for proper handling of the engine parts.
Kubota B1161D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5128).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. This extensive list details all replacement parts for the engine.
Kubota B1121D-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA5156).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine, including the part numbers, names, quantities, and weights of various engine components. It lists 190 line items of parts organized into categories like crankcase, oil pan, cylinder head, gear case, and more. The document is in two languages, with the part names listed in both Polish and English.
Kubota B1121D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5127).pdfjnnfnjsdnnd
This document provides a parts list for an engine. It includes 260 parts related to the engine, such as the crankcase, cylinder head, oil pan, gear case, and more. Each part is listed with its number, name in Polish and English, quantity, and other specifications. It appears to be a comprehensive listing of engine parts for reference when maintaining or repairing the engine.
Kubota B1121D Tractor Parts Catalogue Manual (Publishing ID BKIDA5126).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine. It lists 190 parts in the engine's crankcase, oil pan, cylinder head, gear case, head cover, oil filter, dipstick/guide, and oil pump systems. The parts are identified by number, name in Polish and English, quantity, and other specifications. Kubota claims copyright of the document from 2015.
The document provides instructions for removing the planetary carrier from the final drive of a D9R track-type tractor. It describes:
1) Removing the axles, cover, and bolts to access the carrier.
2) Using an adapter tool to lift the carrier out of the final drive hub.
3) Removing the sun gear from the carrier.
It then provides detailed steps and illustrations for safely removing and installing the carrier while supporting the surrounding components.
The document provides instructions for disassembling and assembling the final drive of a D7R track-type tractor. It lists 30 steps for disassembly, including removing gears, shafts, bearings and seals. It also lists 25 steps for assembly, installing components in reverse order and noting proper alignment and clearance measurements. Required specialized tools are listed for various removal and installation tasks.
This document provides instructions for installing and removing various components of a Caterpillar 3412E engine, including:
1) Installing the aftercooler housing and core on a 3408E/3412E engine.
2) Removing and installing the front engine support on a 3408E/3412E engine.
3) Removing the rear gear group from a 3408E/3412E engine, which involves disassembling various gears, bearings, and shafts.
4) Installing the rear gear group on a 3408E/3412E engine, which involves assembling the various gears, bearings, and shafts.
The document provides instructions for removing and installing a cylinder head on a Caterpillar D9N track-type tractor powered by a 3408 engine. It describes:
1) Removing hoses, tubes, bolts and the fuel manifold to access the cylinder head.
2) Attaching lifting tools and removing the cylinder head, which weighs approximately 90-172 kg depending on the engine model.
3) Cleaning and inspecting parts, applying a new gasket and reinstalling the cylinder head along with associated components like seals and bolts. Tightening bolts in a specific sequence is emphasized.
The document provides instructions for removing, disassembling, and installing a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then removing the compression brake by lifting it out while holding the oil tube. It also details disassembling the compression brake by removing pistons, springs, seals and other components. The assembly process is described as well, including installing new seals and pistons before reinstalling the compression brake.
The document provides instructions for disassembling a steering planetary and brake assembly. Key steps include:
1. Removing the final drive, planetary group, and brake assembly from the machine.
2. Separating the planetary group and brake assembly from the final drive hub using lifting brackets and forcing bolts.
3. Further disassembling the planetary group and brake assembly by removing housing components like ring gears, plates, and carriers to access internal parts like gears, shafts, pins, and seals.
The document provides instructions for installing and removing components of the final drive system for a D7R track-type tractor. It details installing the final drive planetary carrier into the hub using lifting brackets and bolts. It also explains removing the outer axle, draining oil, and removing the entire final drive assembly using lifting brackets attached to the frame. The disassembly instructions cover removing gears, shafts, and bearings from the planetary carrier.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...jnnfnjsdnnd
The document provides instructions for removing and installing the final drive, steering planetary, and brake on a D7R II track-type tractor. The removal process includes draining the oil, removing covers, axles, and bolts. Special tools are required to lift the heavy assembly. Reinstallation requires cleaning seals, applying oil, and torquing bolts to the specified values. The overall process ensures the components are properly disassembled and reassembled.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix ADW) Service Repair Manual ...jnnfnjsdnnd
This document provides instructions for disassembling a final drive component of a D7R II track-type tractor. It describes removing the final drive unit from the tractor and then disassembling it. Steps include draining oil, removing covers, gears, shafts, bearings and other parts using various tools. Precautions are provided regarding fluid containment and preventing unintended movement of components during disassembly.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix ACS) Service Repair Manual ...jnnfnjsdnnd
This document provides instructions for disassembling and assembling the final drive of a D7R II track-type tractor. It describes in 30 steps how to disassemble components such as gears, shafts, bearings and seals. It then describes the 23 steps to assemble these components in reverse order, including precautions for installing seals and retaining rings and verifying clearances with tools. The overall process involves lifting heavy components weighing up to 260 kg with the aid of lifting devices and specialized tools.
This document provides instructions for removing and installing final drives on a D7H track-type tractor. It describes removing the final drive housing which requires separating the track, draining oil, and removing mounting bolts and covers. It also describes disassembling the internal planet carrier components which involve pressing out shafts and removing gears, bearings and seals. The reassembly process is then outlined in reverse order, including pressing in shafts and rings, installing seals and bearings, and torquing mounting bolts.
The document provides instructions for removing and installing final drives on a D7H track-type tractor. The removal process involves using various tools to detach the final drive assembly, drain the oil, and disassemble internal components like planet carriers, gears, shafts, and seals. The installation process reverses these steps, heating and pressing components, and ensuring proper clearances and contact points during reassembly. Proper lubrication and torque specifications are also provided.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Kubota B1241D-EC-F Tractor Parts Catalogue Manual (Publishing ID BKIDA5131).pdfjnnfnjsdnnd
This document provides a list of parts for an engine. It includes the part numbers, names in Polish and English, quantities, and other specifications for 230 different engine parts organized into categories like crankcase, oil pan, cylinder head, gear case, and head cover. The parts range from bolts, nuts, and plugs to larger assemblies and components like the crankcase, cylinder head, and gear case.
Kubota B1181D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5129).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. It appears to be a comprehensive listing of components for a Kubota engine.
Kubota B1121D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 100 individual parts that make up the main bearing case assembly. The parts include the main bearing case group, bolts, pins, seals, gaskets, covers, and bearings.
Kubota B1161D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a list of parts for a Kubota engine crankcase assembly. It includes 140 individual parts with information on part numbers, names, quantities, and other specifications. The crankcase assembly consists of a composite crankcase component as the main part, along with various caps, plugs, pins, bolts, and other fittings that make up the full assembly. Safety precautions are noted for proper handling of the engine parts.
Kubota B1161D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5128).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. This extensive list details all replacement parts for the engine.
Kubota B1121D-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA5156).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine, including the part numbers, names, quantities, and weights of various engine components. It lists 190 line items of parts organized into categories like crankcase, oil pan, cylinder head, gear case, and more. The document is in two languages, with the part names listed in both Polish and English.
Kubota B1121D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5127).pdfjnnfnjsdnnd
This document provides a parts list for an engine. It includes 260 parts related to the engine, such as the crankcase, cylinder head, oil pan, gear case, and more. Each part is listed with its number, name in Polish and English, quantity, and other specifications. It appears to be a comprehensive listing of engine parts for reference when maintaining or repairing the engine.
Kubota B1121D Tractor Parts Catalogue Manual (Publishing ID BKIDA5126).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine. It lists 190 parts in the engine's crankcase, oil pan, cylinder head, gear case, head cover, oil filter, dipstick/guide, and oil pump systems. The parts are identified by number, name in Polish and English, quantity, and other specifications. Kubota claims copyright of the document from 2015.
The document provides instructions for removing the planetary carrier from the final drive of a D9R track-type tractor. It describes:
1) Removing the axles, cover, and bolts to access the carrier.
2) Using an adapter tool to lift the carrier out of the final drive hub.
3) Removing the sun gear from the carrier.
It then provides detailed steps and illustrations for safely removing and installing the carrier while supporting the surrounding components.
The document provides instructions for disassembling and assembling the final drive of a D7R track-type tractor. It lists 30 steps for disassembly, including removing gears, shafts, bearings and seals. It also lists 25 steps for assembly, installing components in reverse order and noting proper alignment and clearance measurements. Required specialized tools are listed for various removal and installation tasks.
This document provides instructions for installing and removing various components of a Caterpillar 3412E engine, including:
1) Installing the aftercooler housing and core on a 3408E/3412E engine.
2) Removing and installing the front engine support on a 3408E/3412E engine.
3) Removing the rear gear group from a 3408E/3412E engine, which involves disassembling various gears, bearings, and shafts.
4) Installing the rear gear group on a 3408E/3412E engine, which involves assembling the various gears, bearings, and shafts.
The document provides instructions for removing and installing a cylinder head on a Caterpillar D9N track-type tractor powered by a 3408 engine. It describes:
1) Removing hoses, tubes, bolts and the fuel manifold to access the cylinder head.
2) Attaching lifting tools and removing the cylinder head, which weighs approximately 90-172 kg depending on the engine model.
3) Cleaning and inspecting parts, applying a new gasket and reinstalling the cylinder head along with associated components like seals and bolts. Tightening bolts in a specific sequence is emphasized.
The document provides instructions for removing, disassembling, and installing a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then removing the compression brake by lifting it out while holding the oil tube. It also details disassembling the compression brake by removing pistons, springs, seals and other components. The assembly process is described as well, including installing new seals and pistons before reinstalling the compression brake.
The document provides instructions for disassembling a steering planetary and brake assembly. Key steps include:
1. Removing the final drive, planetary group, and brake assembly from the machine.
2. Separating the planetary group and brake assembly from the final drive hub using lifting brackets and forcing bolts.
3. Further disassembling the planetary group and brake assembly by removing housing components like ring gears, plates, and carriers to access internal parts like gears, shafts, pins, and seals.
The document provides instructions for installing and removing components of the final drive system for a D7R track-type tractor. It details installing the final drive planetary carrier into the hub using lifting brackets and bolts. It also explains removing the outer axle, draining oil, and removing the entire final drive assembly using lifting brackets attached to the frame. The disassembly instructions cover removing gears, shafts, and bearings from the planetary carrier.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix AGN) Service Repair Manual ...jnnfnjsdnnd
The document provides instructions for removing and installing the final drive, steering planetary, and brake on a D7R II track-type tractor. The removal process includes draining the oil, removing covers, axles, and bolts. Special tools are required to lift the heavy assembly. Reinstallation requires cleaning seals, applying oil, and torquing bolts to the specified values. The overall process ensures the components are properly disassembled and reassembled.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix ADW) Service Repair Manual ...jnnfnjsdnnd
This document provides instructions for disassembling a final drive component of a D7R II track-type tractor. It describes removing the final drive unit from the tractor and then disassembling it. Steps include draining oil, removing covers, gears, shafts, bearings and other parts using various tools. Precautions are provided regarding fluid containment and preventing unintended movement of components during disassembly.
Caterpillar Cat D7R II TRACK-TYPE TRACTOR (Prefix ACS) Service Repair Manual ...jnnfnjsdnnd
This document provides instructions for disassembling and assembling the final drive of a D7R II track-type tractor. It describes in 30 steps how to disassemble components such as gears, shafts, bearings and seals. It then describes the 23 steps to assemble these components in reverse order, including precautions for installing seals and retaining rings and verifying clearances with tools. The overall process involves lifting heavy components weighing up to 260 kg with the aid of lifting devices and specialized tools.
This document provides instructions for removing and installing final drives on a D7H track-type tractor. It describes removing the final drive housing which requires separating the track, draining oil, and removing mounting bolts and covers. It also describes disassembling the internal planet carrier components which involve pressing out shafts and removing gears, bearings and seals. The reassembly process is then outlined in reverse order, including pressing in shafts and rings, installing seals and bearings, and torquing mounting bolts.
The document provides instructions for removing and installing final drives on a D7H track-type tractor. The removal process involves using various tools to detach the final drive assembly, drain the oil, and disassemble internal components like planet carriers, gears, shafts, and seals. The installation process reverses these steps, heating and pressing components, and ensuring proper clearances and contact points during reassembly. Proper lubrication and torque specifications are also provided.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T LGP TRACK-TYPE TRACTOR SGT
Configuration: D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i04905930
Steering Planetary and Brake - Disassemble
SMCS - 4132-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A 138-7575 Link Bracket 3
B 1P-0520 Driver Group 1
C 5B-4274 Forcing Bolt 3/8 - 16 by 3.5 inches 3
Start By:
A. Remove the final drive, the planetary group, and the brake.
1/8
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g02355593
1. Position the final drive, the planetary group, and the brake, as shown.
2. Remove bolts (3) that hold the planetary group and brake (1) to final drive (2) .
3. Attach Tooling (A) and a suitable lifting device to the planetary group and brake.
4. Install Tooling (C) in the final drive hub.
5. Tighten the forcing screws evenly in order to remove the planetary group and brake (1) from final
drive (2) . The weight of planetary group and brake (1) is approximately 136 kg (300 lb).
Illustration 2 g02355596
2/8
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
6. Remove bolts (4) . Remove ring gear (5) from housing (6) .
Illustration 3 g02355619
7. Remove friction discs (7) and the brake plates from the housing.
Illustration 4 g02355621
3/8
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g02355623
8. Remove bolts (8) and plate (9) .
9. Position the housing on suitable cribbing.
Note: Do not allow planetary carrier (10) to fall when the carrier is pressed from housing (6) .
Note: If a shim pack is present between the plate (9) and planetary carrier (10) . Reuse the same
shim pack during assembly only if reusing the same planetary carrier (10) . If a new planetary
carrier (10) is being used the shim pack should be discarded.
10. Use Tooling (B) and a suitable press to remove planetary carrier (10) from housing (6) .
11. Remove bearing cone (11) from the housing.
Illustration 6 g01205303
12. Remove ring (14) from planetary carrier (10) . Remove bolts (13) . Remove slinger (12) from the
planetary carrier.
NOTICE
The bearing is destroyed if the bearing is removed.
4/8
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 13. If necessary, remove bearing cone (15) from planetary carrier (10) .
Illustration 7 g00622128
14. Use a hammer and a punch to push pin (17) in shaft (16) .
Illustration 8 g01205304
15. Remove shaft (16) , planetary gear (19) , discs (20) , and bearings (21) from planetary carrier
(10) .
16. Remove pin (17) from shaft (16) .
17. Repeat Steps 14 through 16 for the remaining planetary gears.
18. Remove sun gear (18) from planetary carrier (10) .
5/8
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 9 g00622132
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
19. Remove bolts (22) and washers.
20. Remove retainer (23) from piston (24) .
Illustration 10 g00622155
21. If necessary, remove bearing cups (25) and seal ring (26) from retainer (23) .
6/8
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 11 g00622156
22. Remove piston (24) and O-ring seal (27) from the housing.
Illustration 12 g00622157
23. Remove seal ring (28) from piston (24) .
Note: Inspect the O-ring seals. If necessary, replace the O-ring seals.
Illustration 13 g00819345
24. Remove spring (29) and ring (30) from housing (5) .
7/8
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T LGP TRACK-TYPE TRACTOR SGT
Configuration: D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i04905929
Steering Planetary and Brake - Assemble
SMCS - 4132-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A 138-7575 Link Bracket 3
D 6V-6640 Sealant 1
ReferenceRefer to Specifications, "Brake and Planetary" in the Service Manual for your machine.
Illustration 1 g00819345
Note: Orient the disc spring with the outer edge downward.
1. Install ring (30) and spring (29) in housing (5) .
1/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 2 g00622157
2. Apply clean oil to seal ring (28) .
Note: Orient the seal ring with the lip downward. Refer to Illustration 2.
3. Install seal ring (28) in piston (24) .
Illustration 3 g00622156
4. Install piston (24) and O-ring seal (27) in the housing.
Illustration 4 g00622155
2/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 5. Lower the temperature of bearing cups (25). Install bearing cups (25) in retainer (23) .
Note: Orient the seal ring with the lip downward. Refer to Illustration 4.
6. Apply clean oil to seal ring (26). Install seal ring (26) in retainer (23) .
Illustration 5 g00622132
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
7. Install retainer (23) on piston (24). Align the oil passage in retainer (23) with the oil passage and
the O-ring seal in the housing. Install bolts (22) .
Illustration 6 g01205304
8. Install sun gear (18) in planetary carrier (10) .
3/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 9. Install bearings (21) in planetary gear (19) .
10. Install discs (20) and planetary gear (19) in planetary carrier (10). Install shaft (16) .
Illustration 7 g00622128
Note: If the rubber in pin (17) is damaged, replace pin (17) .
11. Align the hole in shaft (16) with the hole in planetary carrier (10) and install pin (17). Install pin
(17) until the pin is even with the surface of planetary carrier (10) .
12. Repeat Steps 9 through 11 for the remaining planetary gears.
Illustration 8 g01205303
Note: If bearing cone (15) was removed from planetary carrier (10), a new bearing must be
installed.
13. Raise the temperature of bearing cone (15). Install the bearing cone on planetary carrier (10) .
14. Apply Tooling (D) to the flange of slinger (12) .
15. Install slinger (12) on planetary carrier (10). Install bolts (13). Tighten the bolts to a torque of 50
± 10 N·m (37 ± 7 lb ft).
16. Install ring (14) in planetary carrier (10) .
4/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 9 g02356056
17. Position housing (6) on planetary carrier (10) .
18. Raise the temperature of bearing cone (11). Install bearing cone (11) on planetary carrier (10) .
Illustration 10 g02355621
19. Position plate (9) onto the planetary carrier (10) .
Note: Install shim pack between plate (9) and planetary carrier (10), only if there was a shim
pack originally installed in the differential group and if the same planetary carrier is being reused.
Shim pack thickness should be 0.31 mm (0.0122inch).
20. Install bolts (8) .
5/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 11 g02355619
21. Install friction discs (7) and brake plates. Alternate the friction discs and the brake plates.
Illustration 12 g02355596
22. Position ring gear (5) on housing (6) .
23. Install bolts (4). Tighten bolts (4) to a torque of 135 ± 20 N·m (100 ± 15 lb ft).
6/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 13 g02355593
24. Use a suitable lifting device and Tooling (A) in order to position the planetary group and brake
(1) on final drive (2). The weight of the planetary group and brake is approximately 135 kg (300
lb).
25. Install the bolts (3) .
End By: Install the final drive, the planetary group, and the brake.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jun 27 15:49:17 UTC+0800 2021
7/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T LGP TRACK-TYPE TRACTOR SGT
Configuration: D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i04175780
Final Drive - Remove and Install
SMCS - 4050-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1952 Axle Removal Tool 1
B
8T-3207 Lifting Bracket 1
5P-8622 Shackle 1
2D-4593 5/8 - 11 by 5 1/2 inch 2
1B-4331 5/8 - 11 inch 2
2S-5658 Washer 4
Start By:
A. Separate the track.
Note: The planetary carriers of the final drives can be removed directly from the machine. Refer to
Disassembly and Assembly, "Final Drive Planetary Carrier (In Chassis) - Remove".
Without the sun gear in place, the brakes are ineffective. Personal
injury or death could result. Provide other means to hold or stop the
machine.
1/4
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 1 g00865052
1. Remove bolts (2) and cover (3) from final drive (1) .
Illustration 2 g00865024
2. Use Tooling (A) in order to remove axle (4) .
Illustration 3 g00865075
3. Remove two bolts (5) .
2/4
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 4 g00826743
4. Adjust the top bracket of Tooling (B) until Dimension (X) is 222.25 mm (8.750 inch).
Illustration 5 g00865077
5. Remove two bolts (6) and the nuts from the sprocket segment. Discard bolts (6) and the nuts.
Illustration 6 g02356097
6. Fasten Tooling (B) and a suitable lifting device to the final drive.
3/4
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 7 g00865094
7. Remove bolts (7) that hold the final drive and the brake together.
Illustration 8 g00865095
8. Use Tooling (B) to remove final drive (1) from the machine. The weight of final drive (1) is
approximately 454 kg (1000 lb).
Installation Procedure
1. Install final drive (1) in the reverse order of removal.
a. Tighten bolts (7) to a torque of 700 ± 90 N·m (516 ± 66 lb ft).
b. Lubricate new bolts (6) with SAE 30 oil. Install new bolts (6) and the nuts. Tighten bolts
(6) to a torque of 175 ± 40 N·m (130 ± 30 lb ft). Tighten bolts (6) an additional 1/3 turn.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jun 27 15:50:16 UTC+0800 2021
4/4
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T LGP TRACK-TYPE TRACTOR SGT
Configuration: D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i05236971
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7573 Link Bracket 3
1A-2029 Bolt 1
B 1P-510 Driver Group 1
C
FT-1934 Beam 1
6V-3160 Double Acting Cylinder 1
6V-9061 Pump Group 1
1D-4621 Bolt 4
D
138-7574 Link Bracket 2
2A-1538 Bolt 2
Start By:
A. Remove the final drives.
1/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 1 g01195912
1. Install Tooling (A) and a suitable lifting device to planetary carrier (3) .
2. Remove bolts (1). Remove planetary carrier (3) and the two O-ring seals from the hub. The
weight of planetary carrier (3) is approximately 137 kg (302 lb).
3. Remove retainers (2) .
Illustration 2 g00841089
4. Place support under planetary carrier (3) in order to prevent damage. Use Tooling (B) and a
suitable press to remove the planetary gear shafts.
5. Remove planetary gears (4) from planetary carrier (3) .
2/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 3 g00841091
6. Remove bearing cones (5) from gears (4) .
7. Remove the bearing cups from each side of the gears.
Illustration 4 g00841092
Illustration 5 g01195913
8. Remove bolts (6) and retainer (7) .
9. Attach a suitable lifting device to hub (12) and ring gear (8). The weight of hub (12) and ring
gear (8) is approximately 68 kg (150 lb). Remove hub (12) and ring gear (8) .
3/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 6 g01195915
10. Turn over hub (9) and ring gear (8). Remove retaining ring (10). Attach a suitable lifting device
to hub (9). The weight of hub (9) is approximately 37 kg (82 lb). The weight of ring gear (8) is
approximately 32 kg (71 lb). Remove hub (9) .
Illustration 7 g00841095
11. Install Tooling (C) on hub (12).
Note: Do not lift hub (12) too high. Do not allow hub (12) to contact the fitting on the hydraulic
cylinder.
12. Use Tooling (C) to loosen hub (12) from spindle (13). Remove Tooling (C) .
13. Remove bearing cone (11) .
4/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 8 g01195917
14. Install Tooling (D) and a suitable lifting device to hub (12). Remove hub (12) from spindle (13).
The weight of hub (12) is approximately 180 kg (397 lb).
Illustration 9 g00841099
15. Turn over hub (12). Remove Duo-Cone seal kit (15). Use a hammer and a punch to remove
bearing cup (16) .
16. Turn over the hub. Remove bearing cup (14) from the hub.
Note: If the Duo-Cone seal will be reused, mark the seal kits for installation purposes.
5/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 10 g00841101
Note: Bearing cone (18) may be damaged if the bearing cone is removed from spindle (13) .
17. Remove Duo-Cone seal (19) from spindle (13) .
18. If necessary, remove bearing cone (18) from the spindle.
19. Remove lip seal (17) from spindle (13) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jun 27 15:51:16 UTC+0800 2021
6/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T LGP TRACK-TYPE TRACTOR SGT
Configuration: D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i04164792
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
138-7573 Link Bracket 3
1A-2029 Bolt 3
B 1P-0510 Driver Group 1
D
138-7574 Link Bracket 2
2A-1538 Bolt 2
E 1U-6437 Duo-Cone Seal Installer As 1
1. Apply clean oil to all the parts during assembly.
1/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 1 g00841209
2. Use Tooling (B) to install lip seal (17) in spindle (13) to a minimum depth of 9.65 mm (0.4 inch).
Do not apply excessive force to lip seal (17) during installation in order to avoid damaging the
seal. Put clean oil on the lip of the seal.
3. Raise the temperature of bearing cone (18) to a maximum temperature of 135 °C (275 °F). Install
bearing cone (18) on spindle (13) .
Note: Before the installation of the Duo-Cone seal, refer to Disassembly and Assembly, "Duo-
Cone Conventional Seals - Install" for the correct procedure.
4. Use Tooling (E) to install the Duo-Cone seal on spindle (13) .
Illustration 2 g00841210
5. Lower the temperature of bearing cups (14) and (16). Install bearing cups (14) and (16) in hub
(12) .
6. Use Tooling (E) to install the Duo-Cone seal in hub (12) .
Illustration 3 g01195917
7. Install Tooling (D) on hub (12). Attach a suitable lifting device to Tooling (D). Carefully position
hub (12) on spindle (13) .
2/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 4 g00841212
8. Raise the temperature of bearing cone (11). Install bearing cone (11) on spindle (13).
Illustration 5 g01195915
9. Attach a suitable lifting device to hub (9) and position hub (9) in ring gear (8). Install retaining
ring (10) .
Illustration 6 g01195913
3/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. 10. Turn over the hub (9) and ring gear (8). Attach a suitable lifting device to hub (9) and the ring
gear (8) into position in hub (12).
Illustration 7 g00841092
11. Put retainer (7) into position. Install bolts (6) while the hub is slowly rotated. Tighten bolts (6)
evenly to a torque of 135 ± 15 N·m (100 ± 11 lb ft). The retainer must contact the end of spindle
(13) after bolts (6) have been tightened.
Illustration 8 g00841213
12. Lower the temperature of bearing cups (20) and (21). Install the bearing cups in three planetary
gears (4) .
4/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Illustration 9 g00841215
Illustration 10 g00841216
13. Position the planetary carrier in a press. The shaft (22) must be in position with proper support in
order to be a positive stop for the shaft.
NOTICE
The shaft must be correctly installed. If the shaft is incorrectly
installed, the bearing preload will be incorrect. This will result in
component damage.
14. Position planetary gear (4) in the planetary carrier.
15. Lower the temperature of shaft (22). Use a suitable press to install the shaft in the planetary
carrier. After the installation, the end of shaft (22) must be flush with the retainer of the planetary
carrier. This will provide the correct bearing preload. The gear must rotate by hand after
installation. If the gear does not rotate, the problem must be corrected. Repeat this procedure for
all three shafts.
5/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
31. Illustration 11 g01195912
16. Install three retainers (2) on shafts (22) .
17. Install Tooling (A). Attach a suitable lifting device to Tooling (A). Install the two O-ring seals on
the planetary carrier. Align the drain hole in the planetary carrier with the drain hole in the hub.
18. Position the planetary carrier in the hub.
19. Install bolts (1) that hold planetary carrier (3) to the hub. Remove Tooling (A) .
End By: Install the final drives.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Jun 27 15:52:15 UTC+0800 2021
6/6
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
32. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6T LGP TRACK-TYPE TRACTOR SGT
Configuration: D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
D6T Track-Type Tractor Power Train
Media Number -UENR4055-03 Publication Date -01/12/2017 Date Updated -15/12/2017
i06852073
Final Drive, Steering Differential, and Brake (Left Side) -
Remove and Install
SMCS - 4050-010-LT; 4132-010-LT
Removal Procedure
Table 1
Required Tools
Tool Part Number Description Qty
A
FT-1952 Axle Removal Tool 1
1U-7432 Adapter Assembly 1
B
8T-3207 Lifting Bracket 1
5P-8622 Shackle 1
1D-4615 Bolt 2
1B-4331 Nut 2
5P-8248 Washer 4
C
1B-4331 Nut 1
5P-8248 Washer 2
439-3939 Link Bracket 1
439-3940 Link Bracket 1
8S-9906 Ratchet Puller 1
1A-1460 Bolt 1
5P-8245 Washer 1
1A-8063 Bolt 1
1/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
33. D 5B-4274 Bolt 3
Start By:
a. Separate the track.
b. Remove the drive axles.
c. Remove the steering motor.
d. Drain the oil from the final drive. Refer to Operation and Maintenance Manual, "Final Drive Oil -
Change".
Illustration 1 g01127146
1. Remove bolts (1) from adapter (2).
2. Install Tooling (D) in Holes (X). Remove adapter (2).
2/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
34. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
36. Illustration 3 g01127160
Illustration 4 g01127169
4. Insert Tooling (A) 940 mm (37.0 inch) in the final drive housing. Use Tooling (A) in order to
slide the sliding carrier off the bevel gear shaft.
5. Rotate Tooling (A) by 180 degrees.
6. Pull Tooling (A) until the sliding carrier stops.
7. Rotate Tooling (A) by 180 degrees and remove Tooling (A).
4/7
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering SGT00001-UP (...
2021/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...