2. ff HtfriH*miF
Read Before Use
lF H Hifi
'efr6
g &a-a ffi Hin tljfJr zcur -e " zcur-s E -#lF H }FiF. #6f€ R
H! fJlflE, EI r:lE *i2 Etl Jf
')AB€*EiH,
€tf; fi #'ltF ff .
Thank you very much for buying our tape dispenser ZCUf -9. ZCUT-9 is a
very compact, special well equipped machine which can cut and dispense
various kinds of tape, including non-adhesive products.
iE.f+rE rHii$,fEH+nfr.
Please read this lnstruction Manual carefully.
h7*+ign, :+*RH,A+ffi, U€61H. F J*rll-5t{Flh&H"
For your safety, please always keep this Instruction Manual for reference,
retrain ing and trouble shooting
P2
P3
P3
P4
P5-6
P7-8
P8
P9-10
P11
P11
P12
P12
P12-13
P14-15
P15-16
P16-17
P17
'lFEEtiFlHli* Read Before Use
ttitrFE Safety lnstructions
Cft-5EH+IFff€EiEY.
Definition of Warning and Caution Symbols g# warning
€Elj'l+ffiiA ldentif ication of Parts
#AEiH Load the Tape
igEBt#+<tr set the Tape Length
iHfriSE Mode Setting
fi,fFI4[IE#fliH
How to Manage a Curling Tape
.f€E €fr T H/E T'T,IFE ffi #FiH
Use Narrow Tape / Use Two Rolls in a Same Time
FEilAC Other Functions
F&nhA, Replace the Blade Unit
tE#
fHiF,ti.-F.
fittrfiFh
$tF
.fRiE##
Maintenance
E rror Messages
Trouble Shooting
Specifications
Warra nty
3. +ftfi,EI Safety Instructions
a rn ig + *G E + f ff E Hi a a +F E, r:l 4' +fi rd t[ €E 4 xJ t+.ff il Ei f E _H, E / a.E'fi Ifr
The safety guidelines in this lnstruction Manual must be observed in order
to prevent damage to the machine or injury to the operator or other
perso ns.
i,i€ " g€" -5 " r+ H grfi " H! 4 +tFHffi iE 7 *E.ffi iA.fE E +if ifrfr R|E&.#+F
fIES r.J FI E^E EIt fri ft E { }Erd.
The safety guidelines presciribed "Warning" and "Caution" describe
possible injury or damage that may be suffered from operating or
maintaining the machine in a manner other than as described in this
lnstruction Manual.
E rH i*,fEE +flf ZBniEft rHieJf i€ffi AA*H+rA.
Read and follow the safety precautions carefully before reading the
lnstruction Manual.
gf;.5trH=FIEtr+HTEX
Definition of Warning and Caution Symbols
gE t,n€;Eaft&, r!fit*i44,r|j*EdttlEfr.ryalfiE"
warnins [1:;:ff": l""Tfll]l iil'::*;"":*;i;i fiii"J '
!:H EFIE +#Effi :*t* uFrfr F0' +'et*'ttE € EI F'€ E'n nt'ts$€
CaUtlOn lndicate that miss-handing may result in danger and
As o
AA
that the operator is at risk of injury, or the machine is
at risk of damage.
t-EH+fr lndicatesCaution
tU.= fr frt h ffJ tr4 e-"Sffi it t zr €- #E H! fr @.
A symbol within the triangle, or the description, will
indicate a specific hazard.
*:tffi1f A Prohibited Action
jtt E E f+84ffi trt z.*rt fr!l*.ff .
A symbol within the circle, or the description, will
indicate pro h ibited action.
#gjS?iE!H.l€ A Required Action
It E E ff Edffi ittz. F 4lttiPil+'tf .
A symbol within the circle, or the description, will
ind icate the required action.
4. # t Warning
EA Hifr+&E ffi lr E&4#t*,lf t t€F.
irZijg+v.+aEr6Efr{8.
Do not plug in, unplug the cord, or operate the machine with wet
ha nd s.
Failure to observe this may result in injury due to electric shock.
tn rt + +rE, 9ft H.ft*Il,{nd{+F4rlE,inE* + "
fi ziig+i*HuEI6EiEFi{tE.
Never insert your finger, or any other body part, or any foreign object
into the machine.
Failure to observe this may result in injury.
EtJt€F iEli ft'liE A tL * EdiA frfit M & iE ijl 3F. A ln uiis+ia+rnara^EEFr{t E.
- Keep hair or loose clothing away from the machine while it is
operating.
Failure to observe this may result in injury.
tjil€F&E+rtllEiA.
E rr ini+ *4i)4/ F { #., L Ei*'ff ijl €8.
tu 7lii€+ia+uEI6Ei€Ft.lt *.
This machine is intended for industrial use only.
Do not allow untrained operators or children to operate the machine.
Failure to observe this may result in injury.
F&n h nfrtE+Fil*E zEtiFfi * rt i/tES+ ffi f € ilF "
rlG. fi zric+u+rEE] 6EiEFtFE{tE.
- Turn off the power switch and unplug the machine prior to replacing
the blade unit or peforming any maintenance on the machine.
Failure to observe this may result in serious injury.
+n A ?tittL# H + H E I F ffi E H iE.
t+itlirl,E*H TEEiFHEH iSEI6ti f ffi 'ff /FEFT{'Ed{Ein;F H I4'ft H.
Do not use this machine for anything other than its specified
applications.
Use of the machine for any unintended applications can cause injury
to the operator or failure of the machine.
5. #+atfr++
ROLLER LOCK LEVER &#g4c
TAPE HOLDER
,E5ffi
HOLD DOWN ROLLER
E1_E
DISPLAY
EiHS tr
TAPE OUTLET
l* rv;F
SENSOR
nha
BLADE UNIT
+t&HEre
FLEXIBLE TAPE SUPPORT
ffi#g4cir4fr++
TAPE HOLDER ADJUST LEVER
CONTROL PANEL
EAl+dH;t*fl
AUTO/ MAI'IUAI. MODE REV
BUTTON
'EF'€S
SELECT BUTTON
@zrB
DISPLAY
FWD BUTTON
6. &#itf+4t
TAPE FEED ROLLER Ei#gric
TAPE HOLDER HtHi*tr
TAPE INLET
"E54EfA5"Etx
HOLD DOWN ROLLER
RELEASE BUTTON
+&+
Ci,ft€4ffitr
AC CORD INLET
-rry
I^WeB.
FUSE HOLDER
ffiHJF*ttE4
LOWER TAPE HOLDER
trr9tE*[
BOTTOM OF BODY
7. ..:l+A;H€4ffi.'tffi€mffitr.
Plug in the AC CORD to the AC CORD tNLET.
.ffi tr €ilF tr** t€ rA fi 7sZEi+8ffi /AiEfitErUt ffi €rFffi B"
l,,lake sure the POWER SWITCH is^off then ptug into an
appropriate grounded AC outlet.
.+Ttr€TF'T*.
Turn the POWER SWITCH on.
+ € tH * Je fi fi Ft E r_q ;+ E & H F ilri " it r.J ryL €F tr ti + " + d] " HitT.
When the POWER SWITCH is turned on, a buzzer will has a sound.
At this moment, the mode is set to MANUAL.
..ET"lEK€fl k"#+fl.
Press the HOLD DOWN ROLLER RELEASE BUTTON.
.tr+-#&#tr/+n;*+.
Place a roll of tape in the machine.
.ilEtgniffii***{iffiH"
Hold the tape by adjusting the TAPE HOLDERS. l+&#{+t4*EIJ-taiEfiBE, t*tr{+ft Hg}EiJ6fi t+,r iJl€g€i
f;lJlBsllEgB, ftitri€-t.
Adjust the TAPE HOLDERS to a proper width, slide the TApE
HOLDER ADJUST LEVER from the front to the rear of th6
machine then close it.
ft #i*eirEffi ffi #EEEEA €Fs€+,r,$"
EiFHEg, tr t!*ffiaf,E{+&H E E6+,c'. &HriUnhmfri@
FIBE€F. **IIEA€&H, F'E E&#JF*I]E*.
The TAPE HOLDERS should hold the rott tightly in the center
of the cavity of the machine.
This is very important because it keeps the tape in the center.
he tape passes over the SENSOR in front of the BLADE UNIT.
To support a larger roll of tape, pu the LOWER HOLDER out.
.{8&#nEfiHit*r+ffi-1"
Put the tape on the TAPE FEED ROLLER.
.&T FWD ( HEi ) E*flTFU'N#,IABiffiStrEH.
Press the FWD BUTTON until the tape comes out from the
TAPE OUTLET.
+'lEE iE#rffi ffi F'J, 4E{ncl[tffi it tr!!HFffi S-,J.fiii]En#"
&,f+"6ri"&f,Lf.l,, *iEF,&ffi Er3lJ&ffi it tr+"
When using a strong sticky adhesive tape, pull a litfle bit tape
out in positioning into the TAPE INLET.
Press the FWD BUTTON continuously for a few seconds, also
help the tape in positioning in the TAPE INLET.
.*i7&#+t;lfr i7&ffi g4eE, 9€tAlESH*rr{+.
After the tape is loaded and the TAPE HOLDERS are adjusted,
close the HOLD DOWN ROLLER UNtT.
.#T'+ffi"&+fl.
Press the START BUTTON.
#Ftr-,HffiHJf *+"
Remove the first piece of tape and discard it.
,% tttts4ffitr tc coao
tt-,4tr tNLEt FKq iR=, rI €E++_ p CffiE OUTLET
POWER SWITCH
8. isH-'J ZcUT-e eig&in*, EIU'EHT.
Now your ZCUf -9 is ready to use.
rFiE,frEtE+*{thfriH.
Always use Tweezers to remove tape.
€-NAiTMH T.J, iFffi ffi HfEAfilJ F! _Eiffi 4HN T.
Whenever set the tape, make sure that
adhesive side of tape is alwavs faced down.
.E#l+&H#e$ili€r.J, #r+&HFE*E+&T "ftiF-" &ffi"
When you take the roll of tape out from the machine, pull the tape backward
and pressing REV BUTTON.
.IfrR.fl-F?EarS ( tngtl&E ) .
l4ake sure that DISPLAY indicating <cutting length>.
tr*lKEh98Ezr-E+E, fi A. b. c. d. E. F"
The cutting length is always indicates in some alphabets
like A, b,C,d, E, F.
.igEtrgtt&E
Set the cutting length.
&H +/- #tfl *iAEFfi # frl+<8.
b1AI<EEI rE smm EtJ 999mm Zlslit?itEl#"
FI.fEF "St+'&flieE 6 +T IA KE.
fi *K F'J&T +/- #fl ,ltl ESiEltEiSt "
Set your needed length by using +/- BUTToN.
The cutting length is adjustable in between 5 mm to 999 mm.
Can set six different length by using SELECT BUTToN.
lf you press +^ BUTTON in a short while, the length in
changed to I mm.
And if you press +/- BUTTON longer, if shows fast foraward.
'CEaHutio-Tn E
iRffi [t#A!+4fEtt6, + eiKE*sEzr{<E€Ff T E.
The actual length is differ from the displayed length depends on the
type ofthe tape and its condition.
* ill *ll €4r fr!&# H, tn *!l H * fr!&H{<EEI€grF -trEn#
&H*?S+tr"
When cutting short length oftape, the length may not cut
consistently or tape is jammed.
it?tJL)ttlj *liltS U{fr {R}*'{f ki rEffi
Try severaltest cuts to insure proper ope"ration.
Ezrt! gU-r<E
INDICATECUTIING LENGTH @m
fr+b+t+d+E+F
isEt/*lKEEnEfA
SETTHECUTTINGLENGTH
etu€
INCREASE NUI',lBER
,ffi,D8
DECREASE NUMBER
@o
9. "+Elr"H'I MANUALMODE
.{6ffi*€ LED *TE*dk!"
Make sure that blue LED LA[/P is off]
+ LED jtT&i!l$4#+Tits'J, FT'H4/+dr'Hrtf*E+ht LED rr.
When the LED LAMP is flashing or turned on, press
AUTO/MANUAL MODE and turn off the LED LAMP.
. & T' + ffi " & +fl , +/r ;F r+ ix it - H & # 9i F & ffi i9 E Bi t< E rn g .
Press the START BUTTON once, the machine will feed-in a
piece of tape then cut it out based on your set length.
. fi *t, gu E fl'-,t Ft r&-&'fi ffi "#+x"
To cut another piece, press START BUTTON again.
,
H d"TH'I AUTO MODE
.n6R LED *tAt;{[S.
Make sure that the LED LAIVIP is flashing.
=
LED fTffi,Ir.J, EF"HAl+dr"&f,. ftitrit LED rtTn16"
When the LED LAIVIP's lights are off, press AUTO/ MANUAL
BUTTON and let the LED LAL4P to flash.
. & T " T ffi ' & fl , tr €S 6 iX it -,+ ffi H f* F & ffi is E fr! K E tz gll
Press the START BUTTON once, the machine will feed-in " a
piece of tape then cut it out based on your set length.
+ Pr+t, El l7 H{Jffi H EtJ[fiFt+Eit E -H ft H +iz El.
- E &iltnglF$rffi'#, t'lEE{+i*it+irEltrF!mffi .
When that piece of tape is removed, the machine will feed-in
another piece then cut it out.
The machine will feed-in and cut a new piece of tape once the
piece of tape is removed.
P-iHtt(tfiiSHtt) P-MODE (Preset Mode
EIr{tnlFit?ti9E
The machine is abl"e to be programmed.
iRElEFf itA!€{+&E, i/tiFr+Ezr-+,Heif A&ii!f &E
+fftzg|I ( F3 eee {+" )
A signal will be shown based on your selected quantity of pieces
and it will all cut out. (Maximum 999 pieces.)
{EFiSEE+E€LB ;*{+€ H F'E " A buzzer will has sound when the program is finished.
lSFI Dt,{EE "+ij "Et" H dr "+€rt.
You can use the mode either MANUAL orAUTO.
. t4 "Et+ " &fl *Ef*Ff F *i.t< E " Press SELECT BUTTON to choose your needed length.
a&T'it#"&fl = f,JtEj8Efr "Lcon""
Press SELECT BUTTON for three seconds then it will
indicates "Lcon".
.t)t&T"itF"#ffl El+Ezr "P""
Press SELECT BUTTON again then it will indicates "P".
i+E"H A/+dr"H;t
SET AUTO / MANUAL
LED fI
/_ ,A.a J 2'/ +AFn MAI{UAL IIIODE / (
ft,i<") (
'Ea E{ //)) 4!t9 !!!! r ..
'+aJ'Hn
lrAl{llAL tltoDE -
,n€;[
I Liexiorr
. *&#
(-i.-=) raeereeo
A taat+etr
(QrAFt/ cur and srAND By Y+ lt 6B&#
'Fdr'H;t
AUTOMODE. '-o
t!6
FLASHII.IG
P_+€;I P- MODE
Ezri'gJ'KE
INDICATE CUTTING LENGTH
@Enm
[1 4:Ll] ("'P r'too")
10. .EH +/- #tfl *ireEF g f! ieE "
Use +/- BUTTON and set your needed number of quantity'
. E H' A A, / +-dt" &fl EIEt+" H a "d"+dr"Htt.
Choose AUTO or MANUAL by USING AUTO/MANUAL BUTTON'
. E &'rr"trffi "&fl tr, tJIEFJ*itfi++irEll -trffi # uff iluidi"
When you press the START BUTTON, the machine will feed-in
and cut out a piece of tape for testing purpose . *G"+'!'H*TiElit[38' 4UET"+iA"*fl f*tr4iX$-Hffi H'
+ame u t-l+u el E+F!&HFtffi ET-HE!0E[ 6!eH ".
?o=oiie-rate tnd maChine by using MANUAL MODE, press the
START BUTTON and feed-in a piece of tape after take it out'
t[€F&" H d"{H;tEtiTF E Ai*tr-Hnf H"
To operate the machine by using AUTO MODE, the machine
will feed-in a oiece of tape automatically.
. * FXiSit E - h ffi # r'IE,F H!i&+l+)4 4'.
The signal shows numbers backwards when feeding-in another
piece of taPe.
.- EE,FFtErlr "0"r1, GLtsEE{+A SFil6l.
When the DISPLAY indicates "0", the buzzer will has a sound'
E-FEnfiisk!&8"
E+f+qrc3ElFIt.
{Efi&Erq€€FlIzii€$&ffi, LED fIH*hlts. Ff umt
x&T"*G"+*.
The DISPLAY indicates the number of pieces that is preset'
Please wait until the buzzer stops.
lf you take the tape out before the buzzer stops, the LED LAMP
will flash so you need to press the START SWITCH again'
.!0R#e4fttiFi€tTfi int4{gtt I e4i / +-d1 )' RF*T
" HArl+4"&flFIlEI.
lf you try to change the mode (AUTO/MANUAL) when machine
is operating, just press AUTO/MANUAL BUTTON
t8Eltrfiipteu*uH!&8. (Eg eee H ) tti*{8&ffilfiE
ffitrEtn*lf*E'lFrt"
You can preset the quantity of piece which will be cut out'
(Maximum 999 pieces) The machine will cut out the pieces
based on vour selected quantities then it will stop.
.ET'E++'#+fl * FE# F F kl & H+< E " Fi""s ttie SELECT BUTToN and decide the length of tape'
o' #ii.fit" itt*'E+nTi!, ExFl{}Efr " Lcon". inii noii's-elfcr surroNl so tnat DISPLAY will indicates "Lcon".
o- 'lFH +i- &+[iSEEtntl H!fi E S"lin"
",1?'6.ii6i
pie'iis'io oe ci't out bv usins +/- BUTToN
'. + & T " lFth " & fl , Ear F? Ear it S EH iz ifi id r' &tn Etl iEE
it?i+"
When you press the START BUTTON, DISPLAY indicates a
sionalLhows numbers backwards and cutting continuously
ieame; "0" r.i, qpg#a&HFflilfJiE ltE€t.
When the DISPLAY indicates "O", the buzzer will has sound
then the machine is stopPed
4 L- ( {lg ) HitTF.ttdt;*, E|l*T'fiffi"FtxFPEI.
To stop the machine while running under L-MODE, press the
START BUTTON,
10
&E 3 f-I"
dPREssFoR3sEc.T
rll- moo + &9 @+Effi
/2 lexP 1009c.)
/ (,t**.,) a lG+:i,i,-f-fni! s 11 ! AUTo MoDE ,/
s@
L_&'t L- MODE
Ezrin gl fiE
II{OICATE CUTTING LENGTH
@ Emm
n A-F Z lexp.A-t00mm)
&s 3 t!" ((v.*F+) E PREss FoR 3sEc.S GAI
@O vg F-m + {erp looPsl
@
11. ..#T"E 5ffi f 5 "&+xrFfT+lElR#*tJ{+.
Press the HOLD DOWN ROLLER RELEASE BUTTON in order
to open the HOLD DOWN ROLLER UNIT.
. I4 T ffi + +Ulrrt Lffi68 5 # Zi * ft A Extend the ROLLER LOCK LEVER so" that the rotter will not turn.
.*-UE5#*tt,{+.
Close the HOLD DOWN ROLLER UNIT.
+iEF#tifE r.f , t&.heEKEh.+Fu.
i)J ElJ.rLHiS1iiruit+iEfi sltFlf F ff {<E"
With the rollers locked, the tension may cause the length to vary.
Cut several test pieces in order to adjust the length if needed.
,ER,&#HElft +1 smmd#idEFI Ff i,*tlffi #ni#, nl&Hi'
B?F"
lf the tape is lesser than 15 mm width or you want to dispense two
rolls in a same time, use the SEPARATOR.
tn gdffi E'fft + 1 omm H!&H, rl{l++p: dnfi A+HgS-t"
Cut lesser than 10 mm width of tape, put the cUIDE PLATE on
the SEPARATOR.
.,IAf/I,9'RHlE Efi J}H€8"
Remove the SEPARATOR from the bottom of body.
.fT#ESHFIri+"
Open the HOLD DOWN ROLLER UNIT.
.{aif H;*ffi /in4tfr *[ H E + " lnsert the SEPARATOR into the body by slotting in to the
bottom of the cavity.
.* t/
={
fi E {R T 1 0 m m Fi ni H Fi, 14 + tE iF ii6i} E €F-1.
When you cut the tape lesser than 10 mm, put the ctJlDE
PLATE onto the Separator.
.tE/##Bi ffi k! ilE€s, ut+-#ii#EH-Eitr1T"
Place one roll of the tape or either side by inserting a
SEPARATOR for loading tape.
.tasffi HgrEugrg;i#. u Frys rlE?E"
To hold the tape by adjusting TAPE HOLDERS, it is unnecessary
to push the SEPARATOR out of position.
E lEl r.J il El 6 # ffi H r,J, d' rF E r.J i* i* tEl E K,g Fi & H " When dispensing two roll of tapes in a same time, it is a must
to feed-in both of its' length in a same time.
.8hH-H&#"
Remove the first piece of tape.
.g#hH=Hffi #E, &#ffiUfi eailgiT.
When the second piece of the tape is removed, both side of
tapes are also dispensed.
1'l
12. 4iEiHi,E
FLEXIBLE TAPE SUPPORT
* rngt{<ffiHd*TH
{AANI H!ffiffi/HH T,J,
EE *&HE+ DIF'
&HHE.
When you cut the
tape longer or cut
non-adhesive tape /
film, use FLEXIBLE
TAPE SUPPoRT in
order to avoid the
tape fall down.
sfif€4e
ASSIST STAND
&F7. tEl fiffiHfrfl
r,I+HJE, G-EE
ffigrft+rXEEtJl9
E,l.F4'lR.
Based on the tape
malerial or workpiece
purpose, use iheASS|ST
STAND in orderto iet the
body ofmachine towards
T6Elc.E&zH.
*EEt4g+zH'8"
Only Blade is not accepted to be replaced.
It needs to change with the whole Blade Unit.
.*ffi €tHffr€.
Turn the POWER SWITCH off. .f lt J1 h fr.f|xtft *&w n h n Remove the BLADE UNIT by rele"asing the BLADE UN lT
RELEASE LEVER.
.t+tf kiz,t€a*41d19+"
lnstallthe new BLADE UNIT jnto the body.
.l+E+ E I'd&Fil t LFtHE+fr {i.
Push down on the housing firmly until it is locked.
Make sure that the lower blade is positioned properly, turn the BLADE
UNIT over and take a look the bottom edge of the lower blade.
€-)i,E;*dEf4 n h n$, E h&frfr,v # "
Whenever you clean or replace the BLADE UNIT,
do not touch the sharo edqe of the blade.
]J n Clean the Blade Unit
+-€EtHWW7I H+it',{jHi+.
When cutting tapes with heavy adhesive, the residue will
remain on the blade gradually.
It is necessary to remove the BLADE UNIT for cleaning.
4+.)t hn
INSTALL BLADE UNIT
13. .*rd €tf tt*.
Turn the POWER SWITCH off.
.N +nhfr|t'E++*&w,hE"
Remove the BLADE UNIT by releasing BLADE UNIT RELEASE LEVER.
'.H -r E€r.Eitrffi tr'r+&fr h &6#*WW*,+qn Put some alcoholon a clean dry cloth, or use a swabto remove" the residue. .E&nhfr.
Replace the BLADE UNll
iiq iF t H Lubricate the Blade
iiq iFl,H uBe'4+ Mr#h&, h t Lubricate the blade in order to preve"nt residue stick on the blade.
. *m €m#re"
Turn the POWER SWITCH off.
.i6nhnl/.ilLe+wfr"
Remove the BLADE UNIT irom the body. . * d r,qrffi FflltFi = tiHiHTL{nE.
Locate three oil holes on the back side of the top blade. . H €f
;H 7L +'H/-;H z,H iq iBrfi " . Drip one BLADE rttrFiit 'ffi
drop of OIL into each hole. FJ BTFI 7t h +tfi. Also lubricate LOWER BLAD".EhaE;EB&)n"
E GUIDE. Do not lubricate over and over again.
Hffi6Hht+f.l;8.
Wipe the spare oil away by using cotton cloth.
.i6nhntuEttL++"
Replace the BLADE UNIT into the body. . +TfiHfH+*.
Turn the POWER SWITCH on.
it?tr&irtltfllliitr)1ffi fr &HT*&&# H tr4[iBE"
Make several test cuts in order to make sure the tape will not
fall down from the TAPE OUTLET.
;EtHBlU€F Clean the Sensors
6nsHH trt[Tf,€6ffts&;S"
There are two pairs of SENSORS below the TAPE OUTLET.
lf the opening is covered by tape residue or debris, the
SENSORS will not detect the presence tape.
i*ffi4geiEH]UESEEiAF. i t++F Be€E, E t,,L,&W n h A2Ei*EElt tr $.
Always keep clean around the SENSORS.
To protect the SENSOR, clean the openings after removed the
BLADE uNlT carefully.
i-*ilq clean the
E'E€ +'tt;*;*tl H!tEfi ,FE;4+rl9.
iH2 & H ;A+F***lJF;t4&H1{+.
Put neutral detergent on a damp cloth to clean the body.
Do not use alcohol or solvent to clean the plastic parts.
EXTREMECARE
4t,t l*'lf
BE CAREFUL TO HANDLE
THE SENSORS
13
14. € Lg ;Fl+ & S F C fli E - [U,h'.Btr?&E zr E]. rrl rS.
The buzzer will has a sound then a message will flash and show
on the DISPLAY
E-O2 7J hWli. E-02 Blade is Out of Position
UE Ht'l1n h *.Effi t#4Enfin#lFEet@E'F Emi,E
tl€s1FIt.
A signal shows that the blade is not installed well or machine
stops because of the thickness or hardness of the tape.
.*H€trH+'€"
Turn the POWER SWITCH off. .f +nhfr.f 'xt+, ut4nhnw+*Ail9+eH.
Remove the BLADE UNIT by releasing the BLADE UNIT
RELEASING LEVER then lift the assembly out of the body.
.. +Ttr HilHTJE.
Turn the POWER SWITCH on.
. &T h Ei&+fl fliEi*it-H&#,,H 4zEBt# & tr 5
nhazf,trnfl-hffiH"
Press the FWD BUTTON and feed-in the tape once, cut the
tape in between the TAPE OUTLET and the BLADE UNIT by
scissor.
.&TrEE&fl*Bh&H.
Press the REV BUTTON to remove the tape.
. EE )1,h rE+iaiFT*trr,ry +&.
Clean the BLADE UNIT and lubricate the LOWER BLADE GUIDE.
. &€T*trr H {nE +F,tFn h fr. Check the lower blade position a"nd replace the BLADE UNIT.
E-03 Motor is
*zrHfrltrniJ#m1F+€.
lndicates that the motor is stopped because of overload.
.&T srARr (trffi.) &+rrkEth jaffiiF-EH"
Press the START BUTTON to clear the error message.
.&T"rAE"&ffl*&WM,#"
Press the REV BUTTON to remove the tape.
.+br€ilHtr+"
Turn the POWER SWITCH off.
.{rffi&EzhNfrE&HHtr.
Check the BLADE UNIT and TAPE OUTLET carefully.
. iE& H H 7 *;E IE & H€#@ *#fi & *+ e.
Clear and take away the spare tape waste or sticky residue by
using TWEEZERS.
14
+in *.tr*+
POWERSWTCH IS OFF I
&WT) hA,
REI,IOVE BLADE UN IT
+
iT*€riJf *
POWERSWTCH IS ON
+
,,A.FhgiRlHB
(;i,?]J CLEAR THE ERROR
,^. iti4ft#
( ;ofl )) FEED THE rAPE
/4. ;tF&#
(( llt )) RET,IoVETHETAPE zg
CLEAR THE BLADE
+
SETTHETAPE
m
,^. *EtHiFl=,C
(*^9,)) crennrte ennon
,^. #Rtr#
(FS )) nerrrov: rnr rape
trE&#
SET THETAPE
15. * E Effi fi E1E)ETEh'Fi+I=,H T'J, E,Jftil'JHN h " Do not touch the Blade when you are correcting an error under POWER SWITCH
is on.
* hl E ilH fi J€ Jt'lF rt.fE H trll€*.
fi E rhHiFtrt'[€9 i1 ft ;* TIE
"
)S E-E-ff IEIffi iF1H.H, Etg*irti€ tS €.f+/Z.&tr.
Turn off the POWER SWITCH and stop using the machine.
lf the machine cannot work normally after correcting the error.
It seems that nothing wrong without any error messages.
EEEE=+ lOOOV T'J*FSFf E, JIbT'JiF'J.fEHfiiH.
FIF'f e&t[€*44&tr.
Do not use the tape if static electricity generates over 1000V.
It may cause failure to the machine.
&F'frLW E.ttEl6 zBiiEt&6 U T SrF.
Before returning the machine for repairing, please check the followings.
€ffi+*tT+,
tft€fF4tf fi.
{E EtJrts€ U r*iE ti.
|RWUWW"
The POWER SWITCH
The AC CORD is loosen.
is on but the machine
The FUSE has been blown
&6dffi €tF4rf l+E+ E1tffi^ Effi
ffiB+" Et4tF@rr"
Check the AC CORD then plug in the outlet
firmly. Replace the FUSE.
E&RWE Ec-E'&Wffi , N{iHNFF1F
ItEH t r;€
Stop using t"he machine immediately even
though the FUSE is blown again after
replace,
4"E dr"HttT , #h _H&HETJtfi€T*
H dri*,,T-ts "
After removing piece
of tape, the next piece
does not feed under
AUTO mode.
Hfi&ieEr'+4""
Btr#TA*EE,H"
ftH tE iEiE in dJi €* " &HE5f+U,{F.
The mode is set MANUAL.
Some debris are covering on
the SENSORS.
The tape can not goes through
the SENSORS.
The tape has extremely low
{+Hfriai6" H 4".
JBh&8ffiH"
Set the mode to AUTO.
Remove the debris.
H'}*€EEffi HBE FEfi'J *.{M+1 5MM"
Use SEPARATOR to narow the tape lesser
than 1smm.
Ettwswi'FffiEwMeew;t"
Do not bring strong illuminant close around
the SENSORS.
+*+ 4 H!&#EIEE TE i*4 " E Ar "H;t T
&H"
Some types of tape may not be used under
AUTO mode.
16. n h ft,'EflFMt'dt "
The BLADE can not
move smoothly.
nhfitna *"
The BLADE UNIT is not in a
proper position.
&d, H €I* FF E+ E IUfr 3J T/I fi .t.
Check the BLADE UNIT and push down
on the housing firmly.
&H4 F,nt<E-5iEE
{<E'F FI "
The length of the
tape is different from
the set length.
&HfEfl*iE"
&ffi9+ft**"
The adhesive of tape is too
strong.
The elasticity of tape is too
strong.
i*rilhtne4 ntEt4.EisE€"
CorrecJ the setting after cutting several
test pieces.
&trts86fi.
Tape curls
excessively.
i/l;*ts€81t" #*f[*ea.
The machine is not grounded.
The ROLLER LOCK is
disengaged.
i!6&jus"
E-t&*fitr*€r!i&t.
Check ground on cord.
Engage the ROLLER LOCK to apply
tension.
fi tfl Eg.fn + iE H T.ft, iE n Ep tr tft H *W.*+Etv4+H6 #.11 MtE "
lf the machine still can not operate properly, stop using the machine
immediately and contact vendor for repair authorization.
€ F**
Power Requirement 100v, 120v,220-240v
SfAEJESE
lnput Voltage Range
th4
25W
Wattage
X.rt 116mm ( t ) x 140mm (a')x213mm {ft)
Dimensions 116mm(W) x 140mm(H ) x 21 3mm(D)
i€E
Weight
2.5+F.
2.5 KG.
tng6ffi
Body Material
ffifiS€ ABS
Anti-Static ABS
&HKE
Tape Length
5mm - 999mm
EN#*E
Tape Width
6mm-60mm
i* #+i8 E
Feeding Speed
200mm/fj ( ftErZmffi )
200mm/sec. (using Craft Tape)
&ffiFt4' r{+
Max. Outside Dia. of Roll 300 mm
vfrft
Accessories
€[l4 Power Cord
2ARWt& ( 6Effitr ) 2A Fuse (Builtln lnlet)
ilg;E / +E& / )i H,jgietE / St+
Separator / Guide Plate / Blade Oil / Tweezers
16
17. 6lt, .Si&tu€SE, icTtiii6fi" Remarks The specifications are subjectio change without priornotice.
.iRFffi#Atr*4f!Uid, &HFl * tr<EifliqEftEErBE*€ fFT tE.
.&ThFe tle6jlgGth )oift,h,e tape may differ f.om the set length depending upon the type ofthe tape or its condition. +.,1€sFr€Ei*+r9J*E+4ft&H"
Some typesoftape available with the machine may not be cut depending upon condilions.
1t A al i* ilT, jF ffi'flt q # 4 ]E ffi .lE E E! iF )8, T, h T jE H F! E tE, F ff 6
* €.{+ {EI ff fl+EI r U -L H'! ft* Ffi .
We warrant to the original purchaser of the product that will be free
form defects in material or workmanship for as long as the original
purchaser owns the product, when given normal wear and proper
usage.
+n?F E'.:{Ri5S FRn H [A * H E 1 sox t]r Fr.
The limited warranty for the machine shall be for a. period of 180 days
form the date of purchase.
6 H e {+ !E tj] E|l 7l H, # tr + Zi &.1R16fr. H t4, tr jb E rr-b FIJ.f+ E e ffi I+ " +{RiE *#,fyEF fr ffi /e U T+.f+ r.J € ff :
The spare parts such as Cutting Blades, Rollers, are not covered
under the warranty period as they are considered as "wear parts"
This warranty is only valid if the product:
aE#rt*+Fi4.
Was not damaged while being installed.
<) l+ HR F ff fr
^
S d&. i,H. Fn E E fU fr
^
g i* lg zr lt li f+.tt.
Was operated in accordance with products's specifications,
instructions and any technical support directions.
a*r6i!#4tr8,(. HFiJ*. +&.
^=.
iffiE. iF.E. €rH. EilF&H,
E&. tEI6. &i€ir tErm, 4 H fu^rilF F ff i*tiigrEdff t4€t+ "
Was not modified or damaged by tempering, user error, accident,
disaster, abuse, misuse, power supply, power application,
alternation, repair, modification, a fix or replacement by someone
other than the original product.
17