System Druve VFD AC Motors

1. Motors | Automation | Energy | Transmission & Distribution | Coatings
System Drive VFD AC Motors
1000:1 Constant Torque
1HP – 1500HP TEFC
Powerful
n
n
n
n
USASYSVFD
Reliable
Flexible

2. www.weg.net
System Drive VFD AC Motors
The WEG Systems Drive VFD AC motor raises the bar for customers who demand the best. Benefits
such as very high overload and expanded speed range capabilities increase the value of the product for
many variable speed applications.
The designs are based on the W22 and H-Line Severe Duty motor platforms for outstanding reliability.
What makes this a Systems Drive Motor
g
Constant torque capability to zero speed in standard NEMA frame size TEFC motor
g
High torque designs for wide constant HP capability
g
High short term overload capacities can exceed 200%
g
3 NC thermostats on winding
g
Drive end shaft grounding available (standard 447T and larger )
g
Insulated opposite drive end bearings available (standard 447T and larger)
g
Very low noise
g
Class I and Class II Division 2 up to 20:1CT to 449T frame (certification on larger ratings upon request)
g
VFD rated insulation system exceeds requirements of NEMA MG1 Part 31 standard
g
Custom designs for non-standard base speeds/frequencies (i.e. 600RPM base speed with 6-pole
design) to replace many DC motor applications without gearing change.
What makes this a WEG Motor
g
g
g
g
g
g
Rugged FC200 high strength cast iron
construction
Paint system exceeds 200 hour salt spray test per
ASTM B117
PPLS – Positive Pressure Lubrication System
All Silicon C4 coated lamination steel for
reliability and repairability* – withstands burnout
temperatures of 500C(935F) without loss of
insulating properties. This allows the motor to be
rewound back to the original efficiency.
Class F insulation system with mostly Class H
components for long life
Stainless steel nameplate
*All ratings 254T and larger
2
|
1-800-ASK-4WEG
All data subject to change without notice

3. www.weg.net
Optional Features
g
Class B rise over 4:1CT
g
Insulated bearings or bearing hub 445T and smaller
g
C-Face Encoder Mounting (ODE)
g
TEBC Blower cooling for extended CHP speed range
g
Motor mounted Brake
g
Space heaters
g
RTD’s – Winding and Bearing (364T and larger)
g
IEEE 841 Features
g
Sealed bearings for no maintenance applications
g
Shaft Grounding – AEGIS, Standard Carbon, Mill Type Silver graphite, Inpro MGS…
g
Many more – All WEG available modifications can be added to your Systems Drive motor
Mill Duty Shaft Grounding Ring
ODE 8.5” C-Face
IEEE 841 with Inpro/Seal Isolator
All data subject to change without notice
System Drive VFD AC Motors
|
3

4. www.weg.net
WEG Electric Corp. offers the following products, and more! With a full range
of IEC/NEMA Global Certifications and a full line of products, WEG can supply
the right solution for your needs anywhere in the world. To learn more about
WEG’s products and solutions or to locate a Distributor near you, please call
1-800-ASK-4WEG or visit www.weg.net/us.
Low Voltage Motors,
Single and 3-Phase, 1/8 – 700HP
Variable Frequency Drives
Custom Panels
Low Voltage 1/4 to 2500HP, 230V – 480V
Custom configured to your specification.
General Purpose Motors
Medium Voltage 500-10,000HP
NEMA 1, 12, 3R, 4 and 4X cabinets
Explosion Proof Motors
Multi-pump systems
Quick delivery of preconfigured drives
Crusher Duty Motors
NEMA 4X
and soft starters
IEC Tru-Metric Motors
Dynamic braking resistors
UL 508 certified
Pump Motors including JP/JM
Line and load reactors
Low Voltage (230-460)
P-Base Pump Motors
Plug and play technology
Made in the U.S.A.
Oil Well Pumping Motors
Generators
Pool Spa Motors
Network communications: Profibus-DP,
DeviceNet, Modbus-RTU
Brake Motors
PLC functions integrated
Compressor Duty Motors
Complete line of options and accessories
Farm Duty Motors
Soft Starters
Poultry Fan Motors
3-1500HP
Auger Drive Motors
Oriented start-up
IEEE 841 Motors
Built-in bypass contactor
Stainless Steel Wash Down Motors
Universal source voltage (230-575V,
50/60Hz)
Saw Arbor Motors
Brushless Synchronous Generators for
diesel gen-sets up to 4,200kVA
Hydro-generators up to 25,000kVA
Turbo-generators up to 175,000kVA
Power Transformers
Built and engineered in North America
Voltages 345kV
Ratings 5-250MVA
Station class, oil filled, round core, copper
windings
Commercial HVAC Motors
Network communications: Profibus-DP,
DeviceNet, Modbus-RTU
Pad Mounted Motors
Complete Line of options and accessories
Vector Duty Motors
MV Soft-starter 3.3kV, 4.16kV: up to
Large Electric Motors
3500HP, Withdrawable Power Stacks, 8x
PT100 Temperature monitoring
Cooling Tower Motors
Low Voltage 3-phase motors up to
2,500HP
Controls
Induction Motors up to 70,000HP and
13,200V
Mini – Contactors
Wound Rotor Systems (including
starters) up to 70,000HP and 13,200V
Thermal Overload Relays
Synchronous Motors up to 200,000HP
and 13,200V
Molded Case Circuit Breakers
Explosion proof motors (Ex-d) up to
1,500kW and 11kV
Special configurations and designs
available! Ask your WEG Sales
Representative for details.
Designed, built, and engineered to ANSI
standards.
Custom Solution Package Sales
Enclosed Starters: combination noncombination,
Ex-n, Ex-e, Ex-p motors
IEC Contactors
Manual Motor Protectors
Smart Relays
WEG can package any of its products for
ease of sale! Enjoy a single point of contact
for the entire package of products and
assistance from quote through after-sales
support. Ask your WEG Sales representative for details.
Pushbuttons Pilot Lights
Timing Motor Protection Relays
WEG ELECTRIC CORP.
6655 Sugarloaf Parkway
Duluth, GA 30097
Phone: 1-800-ASK-4WEG
Fax: 678-249-1155
info-us@weg.net
www.weg.net/us
Please contact your authorized distributor:
USASYSVFD 6/13
Terminal Blocks