The brake system of your car consists of various components that work coherently for the optimal functioning of the brake system. One such component which is intricately related to the functioning of your brakes is the brake booster. The brake booster is vital for your car, as it ensures the proper amount of pressure is applied to the breaks to make them work. However, like every other mechanical part, it is also susceptible to failure. Go through the slide to know the most effective procedures to repair the broken brake booster of your car.

1. Most Effective Procedures to Repair a Brake
Booster

2. The brake booster is the vacuum-
powered system in your vehicle
to ensure that the brakes are
work properly.

3. Its responsibility is to kick the
ABS system of your car and apply
the right amount of pressure to
run the brakes perfectly.

4. If the brake booster of your car
loses its power, then it needs
repair or replacement to ensure
that your ABS braking system can
work continually.

5. Many people may prefer to go
to an auto mechanic or a
garage for performing the
repair of their brake booster.

6. You can save your money by
performing the brake booster by
own through these following
steps carefully.

7. Pull out the motor
cylinder

8. Before repairing the brake
booster, you first need to
raise your car on a car jack in
order to reach the brake
booster.

9. Along the driver's side in the
front portion of the car you
can reach into the cavity and
locate the master cylinder.

10. Take the tube-nut wrench, place it
over a brake line and turn it,
make sure that you will remove
the brake lines using either a
tape or marker pain.

11. Repeat the process with other
brake lines. Use another wrench to
remove the master cylinder and
make it free from the brake lines.

12. Pull out the old booster

13. For removing the brake booster
from the brake pedals, you can
use the pliers to take off the pin
that holding the brake booster.

14. You can use a socket wrench for
removing the bolts that can
keep the brake booster
connected to the engine.

15. Make sure that you have properly
examined the brake booster for
identifying its flaw and replace
the damaged part.

16. Connect the new
booster

17. Now the replaced new booster
can be screwed into the place of
the old booster by firmly holding
the brake pedal.

18. By using a socket wrench, you
can connect the booster to the
engine and replace the pin in the
booster and use the previous
bolts.

19. Now you can add the master
cylinder after cleaning it
completely and make sure that
there is no damage in the
cylinder.

20. Replace the master
cylinder

21. For replacing the master
cylinder you can follow the
reverse steps that you are used
to extract it from the engine.

22. Re-attach the cylinder to the
housing by using a socket
wrench and tighten the bolts
securely to make sure that it
does not move.

23. Then connect the brake lines to
the cylinder by making them
against the tape when removing
it from the cylinder.

24. By using the tube nut wrench,
screw back the master cylinder
and repeat the process with the
opposite side.

25. Last words

26. Before you finish the repairing
process of the brake booster
check all the components are
connected correctly.

27. Once you testing the brakes
make sure that the brake booster
is correctly placed in your car,
then you can remove the jack.

28. Thank you!
https://www.ultimatebimmerservice.com/
https://www.facebook.com/UltimateBimmerService
https://twitter.com/DallasBMWRepair
https://plus.google.com/116620504580410934662
https://www.instagram.com/explore/tags/ultimatebimmerservice/