If you want to learn more about how to bring your production line into today’s streamlined world, give Hautau a call. For more than 30 years, we have been helping companies like yours exponentially increase their capacity to cut, finish and process metal tubes. Check more details at: https://hautau.com/

1. How a Rotating-Head Cutoff Machine Works
A rotating head cut off machine is one of the most transformative inventions of the twentieth
century for those who deal in Tube Cutting and Chamfering. Not only does a rotating head cut
off machine change the speed and accuracy of tube cutting, but it literally changes the way the
process is handled altogether. Possibly no other single invention has done more to change the
nature of metal tube handling than this machine, so if your company does not yet have one, it is
time for you to learn more!
What Is A Rotating Head Cut Off Machine?
A rotating head cutoff machine is a cutting instrument that reverses the process of cutting and
finishing metal tubes from the traditional methods used for many years. In the past, metal tubes
were rotated around a stationary cutting head to perform length cuts, then moved to a different
cutting machine for finishing. There were quite a few problems with this setup: first, the motion
from moving the metal pieces caused numerous burrs and nicks during the cutting process and
lead to a large degree of waste or poorly-finished products. Second, the movement from one
cutting station to another resulted in a great deal of lost time and productivity. Finally, the
finishing in this system had to be done by hand and was often not completely accurate.
Once the rotating-head cut off machine came into the picture, however, this entire scenario
changed. Now, the metal tube is held stationary at either end with chucks that keep it from
vibrating, while a servo-driven cutting head rotates around the metal piece, making cuts and
finishes in one process. This simple change makes a world of difference in the way that metal
tubes are cut and finished. By eliminating several steps in the process, as well as the problem of
vibration, those who process metal tubing are able to produce fast, accurate and replicable results
with the touch of a switch.

2. How Can A Rotating Head Cut Off Machine Change My Business?
Even investing in the most basic form of a rotating head cutoff machine will transform a metal
tube processing factory in ways that are almost unimaginable. The company will now be able to
process complicated orders with lighting-fast speed and produce accurate and high-quality
products on a consistent basis.
However, adding accessories can raise this bar even higher. By adding loading and unloading
capabilities, an MES software system to track every aspect of production, and other add-ons, the
basic rotating-head cut off system can be expanded to create an almost unimaginable
improvement in production capabilities.
If you want to learn more about how to bring your production line into today’s streamlined
world, give Hautau a call. For more than 30 years, we have been helping companies like yours
exponentially increase their capacity to cut, finish and process metal tubes. Our professionals are
ready to work with you to reach your full potential and update your production floor!