This document provides instructions for setting up a Raspberry Pi with Google Coder to teach JavaScript programming. It lists the required materials which include a Raspberry Pi, power supply, router, Ethernet cable, SD card and laptop. It then provides steps to download the Coder software, set a static IP address on the Raspberry Pi, connect the Pi to the laptop via Ethernet and SD card, and access the Coder interface by going to a provided URL in the laptop's browser.

1. Google Coder +
RaspberryPI
A fun way to teach JavaScript

2. What do we need?
RasberryPI
Power supply 5V 1A
Router
Ethernet cable
4GB SD Card
Laptop

3. $ wget coder

4. Set the static IP address
edit RPi file /etc/network/interfaces:
iface eth0 inet static # replace: iface eth0 inet dhcp
...
address 192.168.1.81
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254

5. Connect the RaspberryPI
SD card
micro USB power
to the laptop
Ethernet connected to the laptop

6. Select Wifi "CoderConfig"
in laptop’s browser go to:
https://coder.local

7. Have fun!

8. Thanks!
discussion