Home care products

1. © DKSH
Page 1
Innovations in Home Care

2. © DKSH
Page 2
• Premium car wash shampoo
• High gloss car polish
• Leather and vinyl conditioner
• Car freshner gel
• Home Care
• Liquid dish wash detergent
• Dishwash gel
• Bathroom cleaner
• Fabric softener
• Liquid fabric detergent
• Multipurpose cleaner
• Stain remover
• Phenyl white cleaner
Prototypes display at CosmoTech Expo 2019

3. © DKSH
Page 3
Liquid dishwash detergent
• DKSH key ingredients:
➢ Ammonyx LMDO
(Stepan)
• Key product benefits:
➢ Removes oil and dirt
➢ Controls odor
➢ Deep cleaning
➢ Rich lather

4. © DKSH
Page 4
Liquid dishwash detergent

5. © DKSH
Page 5
Ammonyx LMDO

6. © DKSH
Page 6
Ammonyx LMDO

7. © DKSH
Page 7
Dishwash gel
• DKSH key ingredients:
➢ Ammonyx LMDO
(Stepan)
➢ Dermothix 100 (Alzo)
• Key product benefits:
➢ Removes oil and dirt
➢ Removes toughest
grease
➢ Easy to use
➢ Deep cleaning
➢ Rich lather

8. © DKSH
Page 8
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # DG 12122018
Phase Ingredient INCI Supplier %
A1 Distilled water Water ---- Qs
A2 SLES 28 % Sodium lauryl ether sulphate ----- 75.0
A3 Dermothix 100 Disteareth-100 IPDI Alzo 4
B1 Bioterge AS 40 Alpha olefin sulphonate ----- 3.0
B2 Ammonyx LMDO Lauramidopropylamine Oxide STEPAN 5.0
B3 CAPB Coco Amido Propyl Betain ----- 6.0
B4 CDEA Coco Diethanol amide ----- 1.5
C1 Citric acid Citric acid ---- Qs
C2 Perfume Fragrance ----- 75.0
Description:
Transparent clear viscous thick
gel
✓ Removes Oil and Dirt
✓ Controls odour
✓ Deep Cleaning
✓ Rich lather
Key ingredients:
Ammonyx LMDO
It is an amine oxide
suitable for Cleaning
formulations. It is a good
Foam booster, grease
remover and viscosity
builder.
Dermothix 100
It is water soluble
dimeric urethane where
alcohol is a 100 mole
ethoxylated stearyl
alcohol. It is non – ionic
thickener and rheology
modifier.
Procedure:
1 Take total quantity of water, SLES in beaker & add Dermothix- 100 and heat upto 65 degree C
2 Add Bioterge AS 40, Ammonyx LMDO, CAPB & CDEA one by one, stir until all the ingredients are dissolved.
3 Adjust the pH of final product 8 to 9.
4 Pour the product in suitable packaging in liquid stage & keep the product @ RT for setting.
Specification
pH = 8.0
Appearance – Transparent clear viscous thick gel
Stability test : Product has Successfully completed 3 month stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per
Indian standards
DKSH India June 2019
Formulation number:
DKSHIN # DG 12122018
Dishwash gel

9. © DKSH
Page 9
Ammonyx LMDO

10. © DKSH
Page 10
Dermothix 100
.AJLZ{)International Inc.
TM75 and
DERMDTHIJI™1DD
Solid Solutions forViscosity Control
FEATURES
• A::>lyurethane A::>lymers
• BroadpHEffectiveness
• Unique Rheology
andTexture
• Chemical&ThermalStability
Structure
'
CH
(H
HC
IPOI 110
• ExceptionalEmulsification
• Solubilizingand Coupling
• EaseofUse
Viscosity Builder for Surfactant Systems
DEBMDIHDI 75
• INCJName:
Disteareth-75 lPDI
• Unique o/W
Emulsifier
• Water Dispersible Flake
• I00% Active
• Forms Clear to Hazy Solutions
• Soluble in Anionics,
Nonionics and cationics
R OCH D1 I 0 C N H C I'> C 01 CH CH 0 R
Oh
Thickening Effects of DERMOTHIX 75 on
Common Shampoo Systems
VISCO$ity (cps)
50,000
45,000
40,000
35,000
30,000
25,000
20,POO ---------
15,000
10,000
5,000
Percentage of Emulsifier Versus
Percentage of OilPhase
•Conventional Emulsions
• INCJName:
Disteareth-100 IPDI
• Water Solub
le F1ake
• Nonionic
• Clear VISCousSolutions
• Solublein Anionics.
Emulsifier
15
10
5
0
8DERMOTHIX100 Em
ul
sions
Nonionics and cationics
• Pigment Suspension
• Stable High Internal
Phase
o/W Emulsifier
APPUCATIONS
• Shampoos
5 10 15 20 25 30
O Phase
'Y15cosi1Yilulcin& 1 71-
• Sulfate Free Products
X
+ lJrrired
• Conditioners
c.taa.tly X X X X
Surfaaont
Compaljblicy

11. © DKSH
Page 11
Bathroom cleaner
• DKSH key ingredients:
• Ammonyx LOA (Stepan)
• Key product benefits:
➢Removes tough stains
➢Removes oïl and grease
➢Disinfectant
➢Controls odor

12. © DKSH
Page 12
Bathroom cleaner

13. © DKSH
Page 13
Ammonyx LOA

14. © DKSH
Page 14
Multipurpose cleaner
• DKSH key ingredients:
➢ Ammonyx LOA (Stepan)
➢ Ammonyx LMDO
(Stepan)
• Key product benefits:
➢ Removes tough stains
➢ Removes oil and
gease
➢ Gives shine to floor
➢ Disinfectant and
controls odor

15. © DKSH
Page 15
Multipurpose Cleaner
Multipurpose Cleaner
DKSHIN # MC 30082016
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # MC 30082016
Phase Ingredient INCI Supplier %
A1 Aqua _____ --------- Q.S.
B1 Ammonyx LOA
Lauramine
Oxide
Stepan 15.0
B2 Ammonyx LMDO
Lauramidopropyl
Amine Oxide
Stepan 15.0
B3 SLES (28%)
Sodium Lauryl
Ether Sulphate
--------- 6.0
B4
Sodium Hypochlorite
(4%)
Hypochlorous
Acid, Sodium Salt
--------- 6.3
C1 NaOH Sodium Hydroxide --------- 0.1
C2 Nacl Sodium Chloride --------- 0.5
C3 Perfume --------- --------- QS
C4 Color Color Coloring agent QS
Description:
Green Coloured Transparent
Clear Liquid
✓ Removes Tough Stains
✓ Removes Oil and Grease
✓ Gives shine to Floor
✓ Disinfectant and controls odour
Key ingredients:
Ammonyx LMDO.
It is an amine oxide
suitable for cleaning
formulations. It is a good
Foam booster, grease
remover and viscosity
builder.
Ammonyx LOA
It is a an amphoteric
surfactant used in Home
Care cleaning
applications. It is a good
foam enhancer, viscosity
builder.
Procedure:
1
Initially take total quantity water & add Ammonyx LOA, Ammonyx LMDO, SLES, Sod.Hypochlorite, in
manufacturing vessel
2 Then add NaOH to adjust the pH upto 12.0
3 Then add Nacl to increase product Viscosity
4 Finally add Colour and perfume to above with stirring
Specification
pH = 12.0
Appearance – Gtreen coloured Transparent clear liquid.
Stability test : Product has successfully completed 3 month stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per Indian
standards
DKSH India June 2018
Formulation number:
DKSHIN # MC 30082016

16. © DKSH
Page 16
Ammonyx LOA and Ammonyx LMDO

17. © DKSH
Page 17
Stain remover
• DKSH key ingredients:
➢ Steposol Citrimet
(Stepan)
• Key product benefits:
➢ Removes tough stains

18. © DKSH
Page 18
Stain remover
Stain Remover
DKSHIN # SR 13042018
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
DKSHIN # SR 13042018
Phase Ingredient INCI Supplier %
A1 Aqua _____ --------- Q.S.
B2 Steposol Citrimet
Steposol Met 10 U, Natural terpene,
emulsifier
Stepan 6.67
Description:
Orange Coloured Transparent
Clear Liquid
✓ Dissolves wide variety of stains
✓ Cleans glass, carpet & multiple surfaces
✓ Ready for dilution
✓ Household ti industrial applications
Key ingredients:
Steposol Citrimet
Patented technology
comes to ready for
dilution o meet
customer’s specific
product needs. It is
derived from bio-based
sources to provide a
greener profile. It covers
broad range of
applications from
household to industrial
to institutional.
Procedure:
Firstly weigh water in manufacturing vessel & ass steposol Citrimet with stirring to mixed well.
Specification
pH = 10.1
Appearance – orange coloured Transparent clear liquid.
Stability test : Product has successfully completed 3 month stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per Indian
standards.
DKSH India Dec 2018
Formulation number:
DKSHIN # SR 13042018

19. © DKSH
Page 19
Steposol Citrimet
STEPOSOL® CITRI-MET is a revolutionary
fully formulated solution that dissolves a
wide variety of stains and provides a
greener clean in both household and
industrial environments.

20. © DKSH
Page 20
Liquid fabric detergent
• DKSH key ingredients:
➢ Bioterge EC 690
(Stepan)
➢ Stepantex SXS (Stepan)
➢ MEL (Advanced
Enzymes)
• Key product benefits:
➢Dissolves in water
completely
➢Excellent cleaning even
on all types of stains
➢Can be used as a pre
treat stain
➢Much more compact
and easier to use

21. © DKSH
Page 21
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # LFD 02042019
Phase Ingredient INCI Supplier %
A1 Aqua _____ --------- Q.S.
A3 NaOH Sodium Hydroxide --------- 1.6
A4 LABSA 90%
Alkyl benzene
Sulphonic acid
--------- 5,7
B1 Bioterge EC 690 Lauryl alcohol ethoxylate, POE - 7 Stepan 10.0
B2 SLES (28%)
Sodium Lauryl
Ether Sulphate
--------- 20.0
B3 Stepantex SXS Sodium xylène sulphonater Stepan 1.75
B4 MEL Enzyme blend Advanced enzymes 0.5
B5 NaCl Sodium Chloride ------- 1.0
C1 Perfume Fragrance --------- QS
C2 Color Color --------- QS
Description:
Orange Coloured Transparent
Clear Viscous Liquid
✓ Dissolves in water completely
✓ Excellent cleaning even on all stains
✓ Can be used as a pre treat stain
✓ Much more compact & easier to use
✓
Key ingredients:
MEL
Blend of enzymes which
works on all types of
stains.
Stepantex SXS
Anionic surfactant used
in liquid detergent. It is
used as a solubilizer,
coupling agent & cloud
point dispersant.
Procedure:
1
First add NaOH in water and stir to dissolve it. Then add LABSA With continous stirring, adjust the pH NaoH, Until
all nuetralized. ( Buffer solution may vary while adjusting the PH of LABSA solution) to PH-7
2 Add Boterge EC 690, SLES, Stepantex SXS one by one, stir until all ingredients are dissolved
3 Add MEL, Color &stir to Mix well. & adjust the final viscosity with NaCl.
4 Finally add Colour and perfume to above with stirring
Specification
pH = 11.34, Brookfield DV-II+Pro # RV, Viscosity - 408 cps, Spindle -02, Speed - 20 rpm
Appearance – Orange coloured Transparent clear liquid.
Stability test : Product has Successfully completed 3 month stability @ 25 deg RT & 2 weeks @ ETC conditions i.e. 40 deg temp. & 75 % RH
as per Indian standards
DKSH India Apr 2019
Formulation number:
DKSHIN # LDD31012014
Liquid fabric detergent

22. © DKSH
Page 22
Adclean ME L
AETL/DET/RT/055
AETL/DET/F/003
Detergent Lab Trial Results
Objective:
STUDY OF ADDCLEAN ME L (AETL CUSTOMISED ENZYME BLEND) ON MARKET LIQUID
DETERGENT
Samples:
MARKET LIQUID DETERGENT
ADDCLEAN ME L
(MFG. AETL CUSTOMISED ENZYME BLEND)
Treatment Fabric:
(A)EMPA* standard (EMPA soiled fabrics)
Article/Stain code Type
164 Grass
116 Blood/Milk/Ink
106 Carbon / Mineral oil
160 Chocolate
118 Sebum
167 Tea
*EMPA: The Swiss Federal Laboratories for Materials Science and Technology (EMPA, German acronym for
Eidgenössische Materialprüfungs- und Forschungsanstalt) is an interdisciplinary Swiss research institute for applied
materials sciences and technology
Washing parameters:
Parameter Machine wash
Equipment Tergotometer
Detergent dose, g 10.0 & 8.0
Temperature, 0
C Room temperature
Time, min. 30
Water, lt. 1.0
Washing Process:
Machine wash
1. Prepare the bath with desired quantity of water and add laundry detergent
2. Start the machine rotor for mixing before adding fabrics
3. Immerse EMPA soiled fabric and run the machine for 30 minutes
4. After 30 minutes remove the fabric from the bath
5. Rinse in clean water for 5 minutes and drain
6. Air dry the fabric and take reading with spectrophotometer
Understanding of CIE L*
& Y color space:
L* is an international standard for color measurements,
adopted by the Commission Internationale d’Eclairage
(CIE) in 1976.
▪ L*
is the luminance or lightness component,
which ranges from 0 (Black) to 100 (White),
▪ Y gives significant value of luminance (Y
ranges from 1 to 100 indicates brightest white)/
directly related to stain removing efficiency.

23. © DKSH
Page 23
Adclean ME L
AETL/DET/RT/055
AETL/DET/F/003
BLOOD/ MILK/ INK
A) CONTROL
B) MARKET LIQUID
DETERGENT
C) MARKET LIQUID
DETERGENT (100%) + 0.50
% ADDCLEAN ME L
D) MARKET LIQUID
DETERGENT (80%) + 0.50
% ADDCLEAN ME L
Parameter L*
Y
Whiteness
(CIE)
Brightnes
s (%ISO)
Control 43.92 13.78 -26.03 12.37
Market Liquid Detergent 72.21 43.97 37.02 43.12
Market Liquid Detergent
(100%) + 0.50 % Addclean
ME L
77.37 52.15 43.03 50.82
Market Liquid Detergent
(80%) + 0.50 % Addclean
ME L
75.41 48.94 39.65 47.68
AETL/DET/RT/055
AETL/DET/F/003
TEA
A) CONTROL
B) MARKET LIQUID
DETERGENT
C) MARKET LIQUID
DETERGENT (100%) + 0.50
% ADDCLEAN ME L
D) MARKET LIQUID
DETERGENT (80%) + 0.50
% ADDCLEAN ME L
Parameter L*
Y
Whiteness
(CIE)
Brightnes
s (%ISO)
Control 72 43.66 -69.23 29.05
Market Liquid Detergent 79 54.92 -17.34 42.89
Market Liquid Detergent
(100%) + 0.50 % Addclean
ME L
77.89 53.02 -27.24 40.18
Market Liquid Detergent
(80%) + 0.50 % Addclean
ME L
78.05 53.3 -23.53 40.94

24. © DKSH
Page 24
Fabric softener
• DKSH key ingredients:
➢ Stepantex SP 90
(Stepan)
• Key product benefits:
➢Excellent softening effect
➢It gives cloth fresh scent
➢Makes the cloth easier to
iron
➢Provides anti static and
rewetting effect
➢Makes fabric smoother
and fresh

25. © DKSH
Page 25
Fabric softener
Fabric softener
DKSHIN # FS 02032016
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # MC 30082016
Phase Ingredient INCI Supplier %
A1 Distilled water Water --------- Q.S.
B1
Stepanex SP 90
(Esterquat)
Dialkylester ammonium
methosulphate
Stepan 7.0
B2 Belsil ADM 22
Amodimethicone, Laureth - 6,
Trideceth -6, Trideceth - 3
Wacker 2,0
B3 Flosoft FS 222 Cationinc acrylamide SNF 0,5
C3 Perfume --------- --------- QS
C4 Color Color --------- QS
Description:
Light blue translucent Liquid
➢ Excellent softening effect
➢ It gives cloth fresh scent
➢ Makes the cloth easier to iron
➢ Makes fabric smoother & fresh
Key ingredients:
Steopantex SP 90
It is a cationinc
surfactant for used in
fabric softeners. It
provides good softening,
antistatic & rewetting
properties.
Procedure:
1
Add Stepanex SP 90 part by part into DM water with continuos stirring at 50 deg C to make a homogeneous
mixture.
2 Cool it down to 25 deg C. Add & gently stir with Belsil ADM 22.
3 Finally add, Flosoft FS 222 & Fragrance with continuos stirring.
4 Finally add Colour and perfume to above with stirring
Specification
pH = 3.4, , Brookfield DV-II+Pro # RV, Viscosity - 556 cps, Spindle -02, Speed - 10 rpm
Appearance – Light blue translucent Liquid
Stability test : Product has successfully completed 3 month stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per Indian
standards
DKSH India Mar 2016
Formulation number:
DKSHIN # FS 02032016

26. © DKSH
Page 26
Stepantex SP 90 and Belsil ADM 22
Stepan Fabric Softeners
Stepantex Series Fabric Softener
Main Benefits
Chemical name
TEAEsterQuaternaries
Chemical structure
Bestfor
household
use
Typical properties
Goodre-wetting
Goodstaticcontrol
Goodnon-yellowing
Readilybiodegradable
Most
environmental
-friendlyfabric
softener
chemistry Widest
softening
performance
range-does
notturnwaxy
easily
STEPANTEX TEA Ester Quat
Phase
@25°C
%Quat
Solids
Solvent

27. © DKSH
Page 27
Phenyl white cleaner
• DKSH key ingredients:
➢ Ammonyx LO – A
(Stepan)
➢ Makon 12 (Stepan)
• Key product benefits:
➢Surface cleaner
and disinfectant
➢It removes tough oil,
grease, stains
➢It kills the germs
➢Removes odorr and
leaves pleasant frag

28. © DKSH
Page 28
Phenyl white cleaner
Phenyl white cleaner
DKSHIN # PWC 10072017
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # PWC 10072017
Phase Ingredient INCI Supplier %
A1 Pine oil Pine oïl ---- 60
B1 Makon 12 Nonyl Phenol Ethoxylate ----- 30.0
B2 Ammonyx LO - A Lauramine Oxide ------ 10.0
Description:
Yellow transparent liquid conc.
➢ Surface cleaner & disinfectant
➢ It removes tough oil, grease, stains
➢ It kills the germs
➢ Removes odour & leaves pleasant frag
Key ingredients:
Ammonyx LO - A
Amphoteric surfactant
used as a foam
enhancer, viscosity
builder and emulsifier. It
gas excellent gloss on
tiles when used in
phenyl.
Procedure:
Take all the ingredients one by one in a manufacturing vessel, & mix it properly.
Specification
Appearance – Yellow transparent liquid conc.
Stability test : Product has successfully completed 3 month stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per Indian
standards
DKSH India Jun 2016
Formulation number:
DKSHIN # FS 02032016

29. © DKSH
Page 29
Ammonyx LO – A & Makon 12
Product MAKON®
8, 10 and 12
Name
Chemical
Structure
AGRICULTURE
C9H19 (OCH2CH2)nOH
Chemical Nonylphenol Ethoxylate
Description
CAS 127087-87-0
Registry No.
Applications The MAKON series of surfactants is nonionic in nature; they neither ionize in water nor hydrolyze in aqueous acid
or alkaline solutions. Chemically, they are the reaction products of nonylphenol and ethylene oxide. They differ
in the mole ratio of hydrophilic ethylene oxide to hydrophobic nonylphenol. The MAKON surfactants are high
active products that offer a broad range of properties. Because of this versatility, MAKON products find
application in a number of different industries and in a multitude of products including agricultural emulsions,
detergents, sanitizers, industrial cleaners, metal cleaners, textiles, paper de-inking and drilling products.
Typical MAKON 8 MAKON 10
Properties Appearance at 25°C............................................................................ Clear liquid Clear liquid
pH, 5% 1:1 IPA:H2O ........................................................................................ 7.5 ---
pH, 10% aqueous.............................................................................................. --- 6.3
Actives, % ....................................................................................................... 99.8 99.8
Color, APHA ..................................................................................................... 54 29
Pour Point, °C (°F) ...................................................................................... 6 (43) 4 (42)
Freeze Point, °C (°F)................................................................................... 3 (37) 1 (34)
Cloud Point, 1% in water, °C (°F) .............................................................. 24 (75) 54 (129)
Hydroxyl Number .............................................................................................. 95 88
Approximate HLB.............................................................................................. 12 13
Average Moles of EO .......................................................................................... 8 10
Viscosity, cps at 25°C ..................................................................................... 240 240
Flash Point, PMCC, °C (°F)................................................................. >94 (>201) >94 (>201)
Density, g/ml (lbs/U.S. gal).................................................................... 1.04 (8.7) 1.06 (8.8)
RVOC, U.S. EPA, % ........................................................................................... 0 0
MAKON 12
Appearance at 25°C............................................................................ Hazy liquid
pH, 5% 1:1 IPA:H2O ........................................................................................ 7.5
pH, 10% aqueous.............................................................................................. ---
Actives, % ...................................................................................................... 99.8
Color, APHA ....................................................................................... .... 100 max
Pour Point, °C (°F) ..................................................................................... 14 (57)
Freeze Point, °C (°F)................................................................................. 11 (52)
Cloud Point, 1% in water, °C (°F) ............................................................ 81 (178)
Hydroxyl Number .............................................................................................. 76
Approximate HLB.............................................................................................. 14
Average Moles of EO ........................................................................................ 12
Viscosity, cps at 25°C ..................................................................................... 280
Flash Point, PMCC, °C (°F)................................................................ >94 (>201)
Density, g/ml (lbs/U.S. gal).................................................................... 1.06 (8.8)
RVOC, U.S. EPA, % ........................................................................................... 0
Oct. 2015
Supersedes:
Oct. 2014
Page 1 of 2
MAKON
®
is a registered trademark of Stepan Company.

30. © DKSH
Page 30
Premium car wash shampoo
• DKSH key ingredients:
➢ Ammonyx LMDO
(Stepan)
• Key product benefits:
➢ Removes tough stains
➢ Removes oil and
grease
➢ Imparts shine and
lustre

31. © DKSH
Page 31
Premium car wash shampoo

32. © DKSH
Page 32
Ammonyx LMDO

33. © DKSH
Page 33
High gloss car polish
• DKSH key ingredients:
➢ Wacker E 87 (Wacker)
➢ Sabowax FL 65 K (Sabo)
➢ Carbomer 980 (Ashland)
➢ Kaolin Opaque (Imerys)
• Key product benefits:
➢ Provides gloss and
smear
➢ Removes grit and grime
from paint
➢ Reduces paint oxidation

34. © DKSH
Page 34
High Gloss Car Polish
High Gloss Car Polish
DKSHIN # HGCP20062017
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # HGCP20062018
Phase Ingredient INCI Supplier %
A1 Aqua _____ --------- Q.S.
A2
Carbomer
980
Carbomer Ashland 0.3
A3 TEA Triethanolamine ______ QS
B2 Carnabua Wax Carnabua Wax ______ 1.5
B3 SabowaxFL65K
Glyceryl
stearate,
PEG -100
stearate
Sabo 2.0
C1 Belsil E87 Silicone Emulsion Wacker 10.0
C2 Kaolin Kaolin Imerys 8.0
C3 Nipaguard
DMDMH
DMDMH ____ 0.4
Description:
White Liquid
✓ Provides Gloss and Smear
✓ Removes grit and grime from
Paint.
✓ Reduces paint oxidation
Key ingredients:
Belsil E87
SLM E 87 emulsion is a
60% active non-ionic
emulsion
Formulated with a
polydimethylsiloxane. SLM
E 87 can be
Used both in concentrated
as well as diluted form. It
has been
Specially formulated for
use as polish ingredient
.This
Emulsion is used to
provide good gloss and
minimum smear
in car polish formulation
Procedure:
1 Take 2/3rd qty of water in a manufacturing vessel & heat it upto 75 - 80 deg C. Add carbomer 980 to it
under constant stirring. Allow it to completely dissolve and neutralize with TEA
2 In another beaker heat Carnauba wax & Sabowax FL 65 K, heat it upto 75 - 80
deg C.
3 Add oil phase to water phase under continuous stirring with proper
emulsification.
4 Add Kaolin with continous stirring in it
5 At 45 deg Celsius add Belsil E87, and preservative.
Specification
pH = 6.2
Appearance – White liquid
Stability test : Product has Successfully completed 3 month stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per
indian standards
DKSH India June 2018
Formulation number:
DKSHIN # HGCP20062017
Image
Image

35. © DKSH
Page 35
Wacker E 87 and Kaolin Opaque

36. © DKSH
Page 36
Sabowax FL 65 K and Ashland 980 Carbomer

37. © DKSH
Page 37
Car freshener gel
• DKSH key ingredients:
➢ AL-TH Gel (Taiyo
Corp.)
• Key product benefits:
➢ Designed to mask
unpleasant odor
➢ Mild aroma
➢ Long lasting fragrance
➢ Good relaxing and
healing properties
•

38. © DKSH
Page 38
Car freshener gel
Car freshener gel
DKSHIN # CFG 10082015
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # FO 05072018
Phase Ingredient INCI Supplier %
A1 OCTOPE ALTH ALTH Taiyo Corp. 3
B1 Isopar G Synthetic Isoparaffin fluid ------ Q.S.
B2 BHT Butylated Hydroxytoluene ------ 0.5
B4 Perfume - Mon Fragrance ------ 10.0
Description:
Transparent Clear Gel
✓ Designed to mask Unpleasant
Odour.
✓ Mild aroma
✓ Long lasting fragrance
✓ Good relaxing and Healing properties
Key ingredients:
SEBS GP 7550 Procedure:
1 In a beaker add ALTH slowly in 2/3 rd qty of Isopar G at 50 deg C for 5 min.
2 In a separate beaker, take balance qty Isopar G, BHT & fragrance & stir at 50 deg C for 5 min.
3 Mix both the phases & stir for 5 min at 50 deg C.
4 Pour the phase in liquid state in a filling kettle & fill in a suitable container.
Specification
Appearance – Transparent clear Gel.
Stability test : Product has successfully completed 15 days stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per Indian
standards
DKSH India Aug 2015
Formulation number:
DKSHIN # CFG 10082015

39. © DKSH
Page 39
AL – TH gel
・ AL-TH gel air freshener (for cars/home use )
It is the most popular air freshener of gel type especially in air freshener for cars
sold in Japan. The greatest features are heat resistance and cold resistance. It does
not melt at 100 ℃ and does not freeze at the freezing point either. The gel is
transparent and has beautiful appearance. It will be back in original shape even if
its form changes temporarily since it has liquidity. The characteristic of AL-TH gel
has the high compatibility with tropical climate of Thailand since inside of a car
becomes high temperature.

40. © DKSH
Page 40
Leather and vinyl conditioner
• DKSH key ingredients:
➢AK 1000 Silicon Fluid
(Wacker)
➢AK 12500 Silicon Fluid
(Wacker)
➢Wacker E 87 (Wacker)
➢Saboderm HE (Sabo)
• Key product benefits:
➢Non greasy formula
makes leather supple,
shine and vinyl surface
soft
➢Rehydrates, restores
and protects all of your
leather and vinyl
surfaces
➢Great as a leather polish
for furniture, car seats,
shoes, bags and more
•

41. © DKSH
Page 41
Leather and vinyl conditioner
Procedure:
1 Initially take total quantity water ,DEDTA in manufacturing vessel & heat upto 70 – 75 deg C
2 In another beaker take oil phase & heat it up to 70 – 75 deg C.
3 Then add Weigh Carboner 980 to the water phase to mixed well with contineous stirring.
4 Then add oil phase to water phase under continuos stirring to get an emulsion.
5 At 50 deg C, add Preservative with stirring.
6 Finally add perfume with stirring & adjust the product pH 5.5 - 6.5
Specification
pH = 5.5, Brookfield DV-II+Pro # RV, Viscosity – 28000 cps, Spindle - 05, Speed -10 rpm
Appearance – White smooth cream
Stability test : Product has Successfully completed 3 months stability @ 25 deg RT & ETC conditions i.e. 40 deg temp. & 75 % RH as per
Indian standards
DKSH India July 2019
Formulation number:
DKSHIN # LVC 12092018
Leather & vinyl conditioner
DKSHIN # LVC 12092018
All data, formulations and information provided herein have not been comprehensively tested and are not represented as suitable for any particular uses. Statement
concerning possible or suggested uses made herein may not be relied upon or be construed as a guaranty of no patent infringement. Users have the sole responsibility
and obligation for making preliminary tests to determine the suitability of the sample formulations described herein for any application, to make tests before use in any
specific applications, and to confirm the performance, efficacy, safety and regulatory compliance of such products for their particular use.
DKSHIN # AASM 09072019
Phase Ingredient INCI Supplier %
A1 Aqua Water ----- Q.S.
A2 Carbomer 980 Carbomer Ashland 0.5
A3 D. EDTA D.EDTA ----- 0.1
A4 TEA Triethanol amine 0.5
B1 Saboderm HE POE-7 Glyceryl cocoate Sabo 2.0
B2 Makon 12 Nonyl phenol ethoxylate Stepan 1,0
B3 AK 1000 silicone fluid Silicone fluid Wacker 5.0
B4 AK 12500 silicone fluid Silicone fluid Wacker 3.0
B5 Belsil E 87 Silicone emulsion for car care Wacker 10.0
B6
Escalol 775 Octyl methoxy cinnamate Ashland 1,0
B7 DMDMH DMDMH Etser india 0.5
B8 Perfume Perfume ------- Q.S.
Description:
White smooth cream
➢ Non greasy formula makes leather supple,
shine & vinyl surface soft
➢ Rehydrates, restores & protects all of your
leather & vinyl surfaces
➢ Great as a leather polish for furniture, car
seats, shoes, bags & more
Key ingredients:
AK 1000 Silicone fluid
It is linear, non –
reactive
polydimethylsiloxane
with viscosity of
approximately 1000
mm2/s. It is used as a
polish additive,
AK 12500 Silicone fluid
It is linear, non –
reactive
polydimethylsiloxane
with viscosity of
approximately 12500
mm2/s. It is used as a
polish additive,

42. © DKSH
Page 42
Wacker AK 1000 and 12500
Technical data sheet for WACKER® AK 1 000 / Version: 1.5 / Date of last alteration: 28.04.2017 1 / 2
WACKER® AK 1 000
SILICONE FLUID
Product description
Structural formula:
WACKER® AK 1 000 is a linear, non-reactive
polydimethylsiloxane with a viscosity of
approx. 1 000 mm²/s. Due to its chemical structure,
WACKER® AK 1 000 has an outstanding property
profile, which sets it apart from organic materials such
as mineral oils.
Properties
WACKER® AK 1 000 is a clear, odorless and colorless
liquid.
Special features
- minimal change in physical properties over a broad
temperature range
- excellent water-repellent properties
- good dielectric properties
- low surface tension and thus high surface activity
- chemically highly unreactive
- low solidifying point
- high flash point
- high heat resistance
- good solubility in a wide range of solvents
Application
- release agent
- lubricant
- hydraulic fluid
- antifoam agent
- water-repellent agent
- liquid dielectric for electrical and electronic
equipment
- heat-transfer oil
- polish additive
- plastics additive
- additive for textile and fiber auxiliaries
For pharmaceutical applications, we recommend
specialty silicone fluids from our SILFAR® line.
Silicone fluids from our BELSIL® line are available for
the cosmetic sector. Whenever particularly high heat
and shear resistance is required, we recommend
silicone fluids from our AK stab, AK visc and AKC
product lines. Specialty grades of the product
(available as WACKER® PLASTICIZER) will be
needed for use as a silicone plasticizer in RTV-1
sealants.
Processing
Due to WACKER® AK 1 000 many diverse
applications, no general processing information can be
provided. Parameters will vary from application to
application.
Available in a range of viscosities,
WACKER® SILICONE FLUIDS AK are miscible with
each other in any ratio. The standard product's
viscosity can thus be altered to suit your individual
needs.
WACKER® AK 1 000 is a non-polar liquid and is
immiscible with polar solvents such as water or short-
chain alcohols. In aliphatic and aromatic hydrocarbons,
chlorohydrocarbons, ethers, esters, ketones and
higher alcohols, WACKER® AK 1 000 is soluble in any
proportion.
Before the product is used with solvents for the first
time, it is advisable to perform a lab-scale test.
When solvents are used, please remember to read the
appropriate hazard information.
Technical data sheet for WACKER® AK 12 500 / Version: 1.3 / Date of last alteration: 06.11.2014 1 / 2
WACKER® AK 12 500
SILICONE FLUID
Product description
Structural formula:
WACKER® AK 12 500 is a linear, non-reactive
polydimethylsiloxane with a viscosity of
approx. 12 500 mm²/s. Due to its chemical structure,
WACKER® AK 12 500 has an outstanding property
profile, which sets it apart from organic materials such
as mineral oils.
Properties
WACKER® AK 12 500 is a clear, odorless and
colorless liquid.
Special features
- minimal change in physical properties over a broad
temperature range
- excellent water-repellent properties
- good dielectric properties
- low surface tension and thus high surface activity
- chemically highly unreactive
- low solidifying point
- high flash point
- high heat resistance
- good solubility in a wide range of solvents
Application
- release agent
- lubricant
- hydraulic fluid
- antifoam agent
- water-repellent agent
- liquid dielectric for electrical and electronic
equipment
- polish additive
- plastics additive
- additive for textile and fiber auxiliaries
- damping medium
For pharmaceutical applications, we recommend
specialty silicone fluids from our SILFAR® line.
Silicone fluids from our BELSIL® line are available for
the cosmetic sector. Whenever particularly high heat
and shear resistance is required, we recommend
silicone fluids from our AK stab, AK visc and AKC
product lines.
Processing
Due to WACKER® AK 12 500 many diverse
applications, no general processing information can be
provided. Parameters will vary from application to
application.
Available in a range of viscosities,
WACKER® SILICONE FLUIDS AK are miscible with
each other in any ratio. The standard product's
viscosity can thus be altered to suit your individual
needs.
WACKER® AK 12 500 is a non-polar liquid and is
immiscible with polar solvents such as water or short-
chain alcohols. In aliphatic and aromatic hydrocarbons,
chlorohydrocarbons, ethers, esters, ketones and
higher alcohols, WACKER® AK 12 500 is soluble in
any proportion.
Before the product is used with solvents for the first
time, it is advisable to perform a lab-scale test.
When solvents are used, please remember to read the
appropriate hazard information.
Storage
Maximum temperature allowed during storage and
transportation:
50 °C
The 'Best use before end' date of each batch is shown
on the product label.

43. © DKSH
Page 43
Wacker E 87
WACKER E 87
Silicone emulsion for Car Care
Characteristics
SLM E 87 emulsion is a 60% active non-ionic emulsion
formulated with a polydimethylsiloxane. SLM E 87 can be
used both in concentrated as well as diluted form. It has been
specially formulated for use as polish ingredient .This
emulsion is used to provide good gloss and minimum smear
in car polish formulation.
Application
Use clean water to dilute the Wacker E 87 and a
standard dilution of 1: 10 to 1:30 is recommended
for best results. An optimum dilution of 1 : 20 is
recommended for excellent result, if it is to be used in
the diluted form. But, obviously the ratio varies from applica-
tion to application.
Storage and Shelf Life
Wacker E 87 has a shelf life of at least 6 months when stored
at 25 °C in the tightly closed original container. The 'Best use
before end' date of each batch appears on the product label.
Emulsions showing signs of creaming should be agitated before
use to assure uniform consistency.
Storage beyond the date specified on the label does not nec-
essarily mean that the product is no longer usable. In this
case however, the properties required for the intended use must
be checked for quality assurance reasons.
Product Safety
Detailed safety information is contained in each material data
safety sheet, which can be obtained from our sales offices.
Eigenschaften / Product data
Typical general characteristics Inspection Method Value
Appearance visual White liquid
Nonvolatile content, approx., % 64-66
pH,approx 6-9
These figures are intended as a guide and should not be used in preparing specifications.
Kolkata, 2015
The data presented in this leaflet are in accordance with the present state of
our knowledge, but do not absolve the user from carefully checking all
supplies immediately on receipt. We reserve the right to alter product con-
stands within the scope of technical progress or new developments. The
recom-mendations made in this leaflet should be checked by preliminary trials
because of conditions during processing over which we have no con- trol,
especially where other companies' raw materials are also being used. The
recommendations do not absolve the user from the obligation of investi-
gating the possibility of infringement of third parties' rights and, if necessary,
clarifying the position. Recommendations for use do not constitute a warran-
ty, either express or implied, of the fitness or suitability of the product for a
particular purpose.
An ISO 9001:2008 & ISO 14001-2004
& ISO 22716-2007 certified company
Wacker Metroark
Chemicals Pvt. Limited
Diamond Harbour Road
Chandi, 24 Par (S)
W.Bengal 743 503,
India
Tel: + 91 33 24072 101
Fax: + 91 33 24072 502
Seite 1 von 1

44. Disclaimer
.DKSH
Due care has been used in preparation of this presentation and DKSH makes every effort to
provide accurate and up-to-date information. Nlevertheless, this presentation may be subject
to technical ,inaccuracies, information that is not up-to-date or typographical errors.
DKSH does not assume liabili1ty for relevance, accuracy and co:mpleteness of the information
provided. DKSH reserves the right to change, supplement, or-delete some or all of the
information on this presentation without notice.
The layout, graphics and other contents in this presentation are protected by copyright law
and should not be reproduced or used without DKSH's written permission.
Think Asra. Think DKSH. Page 16 © DKSH 2018