Mohamed Aref Abdelfatah Farrag is a mechanical engineer from Port Said, Egypt. He received a Bachelor's Degree in Mechanical Engineering from Suez Canal University in 2001. He has over 15 years of experience in operations and mechanical maintenance engineering for gas turbines and diesel generators. Currently he is a section head and mechanical maintenance engineer at East Delta Electricity Production Company in Egypt, where he is responsible for maintenance, overhauls, and repairs on GE, ALSTHOM and Finacantieri units. He has extensive experience in tasks like rotor removal and installation, blade installation, generator and turbine alignments, and maintenance of combustion engines. He also has training in areas like mechanical maintenance, fire protection
1. Page 1 of 4
MOHAMED AREF ABDELFATAH FARRAG
Mobile number: 002-01225960232
E-mail: arefmohamed50@yahoo.com
Personal Data Date of Birth : 11/05/1979 Place of Birth : PORT SAID
Profession : Mechanical Engineer Nationality : Egyptian
Marital Status : Married Religion : Muslim
Educational
Qualification
Bachelor Degree in Mechanical Engineering from Suez
Canal University.
Semester : July 2001 General Grade : pass
Project Grade: Very good
Practical
Experiences Jan 2015- present 6*LM6000PC GE Aero Gas turbines.
Tasked with project monitoring and representing the customer (East
Delta Electricity production Company) as the main mechanical
engineer from project inception, ground leveling, clearance, startup
and commissioning.
2003-till present (East Delta electricity production company, Egypt)
Position.
Operations and Mechanical maintenance engineer (section head)
Project Description/summary: Operation and maintenance of the 3 GE
and 3 ALSTHOM FRAM 5 MS 5001P MARKII SPEED TRONIC and diesel
generator units in Sharm El Sheikh power plant.Started as the
operations engineer, promoted to operations manager and currently
hold the position of the section mechanical maintenance engineer
(section head).Involved in all levels of maintenance from
overhauling of engine to system integration, spares management
and ordering. The following were achieved in this period:
carried out major maintenance (hot gas path inspection, floating
adjustment, bearing inspection and replacement, reduction gear
bearing replacement and run-out and drop check for generator
rotor, generator cleaning, main compressor cleaning and starting
diesel replacement for two gas turbine (GE4,6) in Sharm el sheikh
power plant.
2010 transported and replaced GE turbine by ALSTHOM and
carried out its integration with GE Generator and adjusted the
ALSTHOM TURBIE and GE Generator on same foundation. Installed
new piping lines for cooling, lubricant systems.
Planning and scheduling the man power & equipment to exiting
the work.
Maintenance and overall major for gas turbine units(ALSTOM, G.E)
2. Page 2 of 4
and diesels.
Rotor removal and installation
Clearance data point gathering for hot gas components and major
rotor out inspections.
Bearing - rotor alignments (with dial indicators)
Blade installation-drop positioning and removal
Stage 1, 2 and 3 nozzle alignments
Vertical casing alignments
Shroud installation and final positioning
Gear-generator alignments and field removals
Teardowns due to test failures (up to and including rotor
removals)
Bentley Probe and thermocouple installation (bearings-thrust and
HGP)
Rotor blades – buckets and compressors
Half shell removal and replacement of turbine and compressor
blades-buckets
Alignments – turbine to generator – turbine to accessory base
Operation and maintenance of Finacantieri diesel engine generator
power of (4*5.6 MW).work with PLC control units.
Operation of transformer for 11Kv to 22Kv power of 8*25 MVA
Perfect engineering for internal combustion engine (diesel engine)
includes {maintenance – major – and construction}.
Make construction diesel engine for Sharm power plant.
Training
Training course in (AMPLISSIMA program) from 3/11/2007 to
6/11/2007 approved from fayed training center.
Training course in fire protection from 12/2/2007 to 26/2/2007
approved by south Sinai civil defense department.
Training course in (AMPLISSIMA program) as instructor in storage,
spare parts and work orders planning from 10/12/2006 to
14/12/2006 approved from fayed training center.
Training course in diesel mechanical maintenance from 21/3/2005
to27/3/2005 approved by Sharm Al Sheikh power plant.
Training course in GAS TURBINE mechanical maintenance from
17/10/2004 to 30/10/2004 approved by Sharm Al Sheikh power
plant.
Training course in safety from 24/5/2004 to30/5/2004 approved by
Sharm Al Sheikh power plant.
Training course in fire protection from 12/2/2004 to 26/2/2004
approved by South Sinai civil defense department.
Computer Skills
Excellent knowledge about Computer Basics such as (MS-Word, MS-
PowerPoint, MS-Excel, MS-Access, Internet Concepts.)
Excellent knowledge about different operating systems such as
(windows, Linux, ect.)
3. Page 3 of 4
Language *Arabic: Mother tongue *English : Good
Additional Skills Flexible mind, analytical thinking, cooperative and capability to
improve skills.
Ability to join different fields of engineering work including
engineering design, projects supervision(installation and start up ),
quality control, production engineering.
Very good ability to work efficiently within a team work.
Active , Have the Ability to learn and to experience exchange.
Ability to analysis Market price and Tender price.
Having driving licnece