Tarquin Cap04

1. © 2012 by McGraw-Hill, New York, N.Y All Rights Reserved
6-1
Lecture slides to accompany
Engineering Economy
7th edition
Leland Blank
Anthony Tarquin
Chapter 6
Annual Worth
Analysis

2. 6-2
LEARNING OUTCOMES
1. Advantages of AW
2. Capital Recovery and AW values
3. AW analysis
4. Perpetual life
5. Life-Cycle Cost analysis
© 2012 by McGraw-Hill All Rights Reserved

3. 6-3
Advantages of AW Analysis
AW calculated for only one life cycle
Assumptions:
Services needed for at least the LCM of lives of alternatives
Selected alternative will be repeated in succeeding life cycles
in same manner as for the first life cycle
All cash flows will be same in every life cycle (i.e., will change
by only inflation or deflation rate)
© 2012 by McGraw-Hill All Rights Reserved

4. 6-4
Initial investment, P – First cost of an asset
Salvage value, S – Estimated value of asset at end of
useful life
Annual amount, A – Cash flows associated with asset, such
as annual operating cost (AOC), etc.
© 2012 by McGraw-Hill All Rights Reserved
Alternatives usually have the following
cash flow estimates
Relationship between AW, PW and FW
AW = PW(A/P,i%,n) = FW(A/F,i%,n)
n is years for equal-service comparison (value of LCM or
specified study period)

5. 6-5
Calculation of Annual Worth
An asset has a first cost of $20,000, an annual operating
cost of $8000 and a salvage value of $5000 after 3 years.
Calculate the AW for one and two life cycles at i = 10%
AWone = - 20,000(A/P,10%,3) – 8000 + 5000(A/F,10%,3)
= $-14,532
AWtwo = - 20,000(A/P,10%,6) – 8000 – 15,000(P/F,10%,3)(A/P,10%,6)
+ 5000(A/F,10%,6)
= $-14,532
AW for one life cycle is the same for all life cycles!!
© 2012 by McGraw-Hill All Rights Reserved

6. Capital Recovery and AW
Capital recovery (CR) is the equivalent annual amount that
an asset, process, or system must earn each year to just
recover the first cost and a stated rate of return over its
expected life. Salvage value is considered when calculating
CR.
CR = -P(A/P,i%,n) + S(A/F,i%,n)
Use previous example: (note: AOC not included in CR )
CR = -20,000(A/P,10%,3) + 5000(A/F,10%,3) = $ – 6532 per year
Now AW = CR + A
AW = – 6532 – 8000 = $ – 14,532
6-6 © 2012 by McGraw-Hill All Rights Reserved

7. Selection Guidelines for AW Analysis
6-7 © 2012 by McGraw-Hill All Rights Reserved

8. 6-8
Solution:
ME Alternative Evaluation by AW
Not necessary to use LCM for different life alternatives
A company is considering two machines. Machine X has a first cost of
$30,000, AOC of $18,000, and S of $7000 after 4 years.
Machine Y will cost $50,000 with an AOC of $16,000 and S of $9000 after
6 years.
Which machine should the company select at an interest rate of 12% per
year?
AWX = -30,000(A/P,12%,4) –18,000 +7,000(A/F,12%,4)
= $-26,412
AWY = -50,000(A/P,12%,6) –16,000 + 9,000(A/F,12%,6)
= $-27,052
Select Machine X; it has the numerically larger AW value
© 2012 by McGraw-Hill All Rights Reserved

9. 6-9
AW of Permanent Investment
Solution: Find AW of C over 5 years and AW of D using relation A = Pi
Select alternative C
Use A = Pi for AW of infinite life alternatives
Find AW over one life cycle for finite life alternatives
Compare the alternatives below using AW and i = 10% per year
C D
First Cost, $ -50,000 -250,000
Annual operating cost, $/year -20,000 -9,000
Salvage value, $ 5,000 75,000
Life, years 5 ∞
AWC = -50,000(A/P,10%,5) – 20,000 + 5,000(A/F,10%,5)
= $-32,371
AWD = Pi + AOC = -250,000(0.10) – 9,000
= $-34,000
© 2012 by McGraw-Hill All Rights Reserved

10. 6-10
Typical Life-Cycle Cost Distribution by Phase
© 2012 by McGraw-Hill All Rights Reserved

11. 6-11
Life-Cycle Cost Analysis
LCC analysis includes all costs for entire life span,
from concept to disposal
Best when large percentage of costs are M&O
Includes phases of acquisition, operation, & phaseout
© 2012 by McGraw-Hill All Rights Reserved
 Apply the AW method for LCC analysis of 1 or more
cost alternatives
 Use PW analysis if there are revenues and other
benefits considered

12. 6-12
Summary of Important Points
AW method converts all cash flows to annual value at MARR
AW comparison is only one life cycle of each alternative
Alternatives can be mutually exclusive, independent,
revenue, or cost
For infinite life alternatives, annualize initial cost as A = P(i)
Life-cycle cost analysis includes all costs over
a project’s life span
© 2012 by McGraw-Hill All Rights Reserved