Custom built tube cutting machines like cold saw flying cut off are reliable, quick and easy to integrate into your specific application.

2. Steel Pipe Co., Ltd is one of the biggest tube and pipe manufacturer in China
with employees of 1800. It has 15 ERW production lines with annual output of
1.6 millions of tons of ERW steel pipes ranging from 21.3 to 325 mm diameter.
Its tube and pipe are sold thru over 60 countries for some rough applications
like oil & gas, chemical and power industry.

3. The company is honored to be the first-class supplier for China National
Petroleum Group and Petro China Group. Steel Pipe has been long-term
customer with SRET Equipment for decades. The company has many sets of
machines made .

4. SRET Equipment applied to its several lines in its daily
operation. SRET Equipment machines’ performance and
extensive customer service earn a complete customer
satisfaction and trust. In 2015, Steel Pipe came to SRET
Equipment again for help upgrade its existing 219 ERW
tube mill line.

5. By upgrading, the customer wants to increase its mill speed, to improve the
pipe cutting edge for eliminating end facing process, and to be able to process
thicker material as well.

6. SRET Equipment provide the solution consisting of entire entry line section
including uncoiler, leveling machine, shear & end welder, horizontal spiral
accumulator, and plus milling type orbital flying cut off cold saw, cold saw
flying cut off that not just meet, but exceed the customer’s expectations.

7. One big challenge facing SRET Equipment is that the customer
requested the shortest lead time possible and allowed for just one
month of time window to complete the installations and
commissioning for all the machines, to minimize the impact of
existing line stoppage.

8. it turned out that it took SRET Equipment only 3 month to deliver all
these machines and had the installation and commissioning
completed within less than one month. The job was done in Feb,
2015.

9. Customer values delivered by SRET Equipment include
Process a broader range of material, thickness up to 12 mm from previous 8
mm
Higher productivity, mill speed increased to 40 m/min
Increased automation level and reduced manpower required, number of
operators needed for entry line down to 1 from previous 4
Eliminate the requirements for end facing process for a big cost saving, with
burr-free cutting achieved by milling type orbital flying cutoff cold saw
Short lead time and commissioning time ensure a minimum financial impact of
existing line stoppage

10. Shenyang SRET Equipment Co., Ltd
Phone +86 – 24 – 24502154
Fax: +86 – 24 – 24538186
Email: customer@sret-equipment.com
Website : www.sret-equipment.com