This user manual provides instructions for installing fender flares on a Smart Fortwo 453. It includes a parts list of 8 fender flare pieces and instructions to check the fit of the flares without adhesive first. When the fit is verified, the instructions say to remove protective tape and attach the flares using adhesive after cleaning and when temperatures are above 20 degrees Celsius. The manual notes better adhesion may be achieved using polyurethane glue under the flares in addition to the adhesive tape. Contact information is provided for questions.
1. User Manual | Smart Power Design
SMART
POWER
DESIGN
FENDER FLARES
SMART FORTWO 453
2. Fender Flares Smart Fortwo 453
Photo 1: The rear left Fender Flare and Side Skirt for Smart Fortwo 453
by Smart Power Design
Parts list
8 pieces of Fender Flares
1
3. 2
Instructions
1. Check the parts for damages before mounting.
2. Then put on the car, without pulling off the protective plastic
tape, the Fender Flares to check how they fit.
3. Clean the area of the parts from dirt and wax, in order the
adhesion being good.
4. Only if the fitment is ok, then please pull out the protective
plastic tape and fit the Fender Flares on the car.
5. Please assemble these parts only with a temperature of
more than 20° Celsius (also the surface of the vehicle must
have this temperature).
6. Then attach the parts and press them.
7. Do not wash the Smart car for a day.
Note: For a better installation and application please remove the
double adhesive tape and put on the Fenders Flares some
Polyerathane glue. Please attach it with paper adhesive tape. After
24 hrs, you can remove the paper adhesive tape.
4. 2
Fender Flares in other colors
Enjoy what you have just installed. We hope that you
are not going to like it but to love it as it fits perfectly
on your lovely Smart Fortwo 453. Give us a review
here: http://bit.ly/Site-Review
We would like to thank you for purchasing from
Smart Power Design a company specialized in Smart
Tuning and Accessories.
If you have any problem or questions feel free to
contact us via email at: info@smart-power-design.de
or sales@smart-power-design.com or via telephone
at: 0049-711-217-20291.
3
5. Company Information
Follow us
4
Smart Power Design
Möhringer Str. 93 – Stuttgart
Zip: 70199 – Germany
Email: info@smart-power-design.de
sales@smart-power-design.de
Telephone: 0049 711 217 20291
Website: www.smart-power-design.de