The ZEGO 921 Steel Fixer is a rechargeable, lightweight steel tying tool that can be used to fasten mesh sheets and fix floor cable heating to mesh. It has simple one-handed operation, comes with two batteries, a high speed charger, and a hard carry case. It is designed to be easy to train unskilled workers on and can tie steel bars between 9mm to 21mm in diameter.
The ZEGO 921 Steel Fixer is a lightweight and easy to use steel fixing tool that operates on rechargeable batteries, coming with two batteries and a high speed charger. It weighs only 2.1 kg and can be used to fasten mesh sheets and fix floor cable heating to mesh, making it suitable for training unskilled workers in steel fixing.
IRJET- Construction of Hollow Reinforced Concrete BlockIRJET Journal
This document summarizes research on constructing hollow reinforced concrete blocks. It describes testing conducted on raw materials used to make concrete blocks of varying thickness and with or without reinforcement. The testing showed that block thickness, not concrete grade, determines whether the blocks withstand stresses, with a minimum thickness of 40mm required. Reinforced blocks of all thicknesses failed, while unreinforced blocks sustained stresses only at 40mm thickness or more. The research aims to develop structurally efficient hollow concrete blocks for load-bearing masonry construction.
Green energy bricks are a new building material designed to revolutionize construction. They have a massive R8+ insulation rating, making them 4 times more insulated than standard methods. They are lightweight, load bearing, fire resistant, and can be installed much faster than conventional bricks. Using green energy bricks can significantly reduce construction costs and time while improving energy efficiency.
IRJET- Techno-Economical Analysis of Gabion Retaining Wall Against Convention...IRJET Journal
This document presents a techno-economic analysis comparing gabion retaining walls to conventional retaining walls. It analyzes rubble masonry gravity walls, RCC cantilever walls, RCC counterfort walls, and gabion walls. Design parameters like height, backfill, foundation, and loads are kept constant. The designs are then compared based on required cross-section and steel. The analysis finds that gabion walls prove more economical due to using locally available materials, which makes construction faster and cheaper compared to other wall types. Key advantages of gabion walls identified are easy drainage, flexibility to tolerate differential settlement, speed of construction, ability to use waste materials, and no hydrostatic pressure buildup.
This document discusses a case study of a residential project in Doncaster, Victoria that used ZEGO Insulated Concrete Forms (ICF) to achieve high insulation and reduced build time. The ICF system provided 90mm of insulation in the walls for high energy efficiency while maintaining structural integrity. It allowed for one concrete pour per floor, reducing build time. The owner reported heating/cooling costs reduced by 50-80% and being able to turn systems off during moderate weather. Rendering the exterior was also straightforward with the system.
Planning and Scheduling of Shuttering System for Multi-Storeyed BuildingIRJET Journal
This document discusses planning and scheduling of shuttering systems for multi-storey buildings. It begins by introducing different types of conventional formworks used such as timber, plywood and steel. It then focuses on Mivan technology, an advanced aluminum formwork system from Malaysia. The key components and working of the Mivan system are described. The advantages include light weight, high load capacity, reduced construction time and ability to be erected by unskilled labor. However, initial costs are higher and it may not be suitable for small projects. Overall, the Mivan system provides improved uniformity, quality and seismic resistance over conventional formworks.
IRJET- Experimental Study on Sandwich Panel using Sisal and Basalt FiberIRJET Journal
The document describes an experimental study on sandwich panels using sisal and basalt fibers. Sandwich panels consist of thin, high-strength skins bonded to a lightweight core. These panels provide high stiffness and strength while being lightweight. In the study, sisal fiber and basalt fiber were added to the cement mortar used to make the skins and core of sandwich panels to reduce weight without compromising strength. Various fiber contents were tested. Sandwich panels of size 1200x200x50mm with sisal fiber skins (2-3%), basalt fiber core (2-3.2%), and sisal fiber skins were produced. Compression, splitting tensile, and flexural tests showed that fiber addition increased panel strength compared
The ZEGO 921 Steel Fixer is a rechargeable, lightweight steel tying tool that can be used to fasten mesh sheets and fix floor cable heating to mesh. It has simple one-handed operation, comes with two batteries, a high speed charger, and a hard carry case. It is designed to be easy to train unskilled workers on and can tie steel bars between 9mm to 21mm in diameter.
The ZEGO 921 Steel Fixer is a lightweight and easy to use steel fixing tool that operates on rechargeable batteries, coming with two batteries and a high speed charger. It weighs only 2.1 kg and can be used to fasten mesh sheets and fix floor cable heating to mesh, making it suitable for training unskilled workers in steel fixing.
IRJET- Construction of Hollow Reinforced Concrete BlockIRJET Journal
This document summarizes research on constructing hollow reinforced concrete blocks. It describes testing conducted on raw materials used to make concrete blocks of varying thickness and with or without reinforcement. The testing showed that block thickness, not concrete grade, determines whether the blocks withstand stresses, with a minimum thickness of 40mm required. Reinforced blocks of all thicknesses failed, while unreinforced blocks sustained stresses only at 40mm thickness or more. The research aims to develop structurally efficient hollow concrete blocks for load-bearing masonry construction.
Green energy bricks are a new building material designed to revolutionize construction. They have a massive R8+ insulation rating, making them 4 times more insulated than standard methods. They are lightweight, load bearing, fire resistant, and can be installed much faster than conventional bricks. Using green energy bricks can significantly reduce construction costs and time while improving energy efficiency.
IRJET- Techno-Economical Analysis of Gabion Retaining Wall Against Convention...IRJET Journal
This document presents a techno-economic analysis comparing gabion retaining walls to conventional retaining walls. It analyzes rubble masonry gravity walls, RCC cantilever walls, RCC counterfort walls, and gabion walls. Design parameters like height, backfill, foundation, and loads are kept constant. The designs are then compared based on required cross-section and steel. The analysis finds that gabion walls prove more economical due to using locally available materials, which makes construction faster and cheaper compared to other wall types. Key advantages of gabion walls identified are easy drainage, flexibility to tolerate differential settlement, speed of construction, ability to use waste materials, and no hydrostatic pressure buildup.
This document discusses a case study of a residential project in Doncaster, Victoria that used ZEGO Insulated Concrete Forms (ICF) to achieve high insulation and reduced build time. The ICF system provided 90mm of insulation in the walls for high energy efficiency while maintaining structural integrity. It allowed for one concrete pour per floor, reducing build time. The owner reported heating/cooling costs reduced by 50-80% and being able to turn systems off during moderate weather. Rendering the exterior was also straightforward with the system.
Planning and Scheduling of Shuttering System for Multi-Storeyed BuildingIRJET Journal
This document discusses planning and scheduling of shuttering systems for multi-storey buildings. It begins by introducing different types of conventional formworks used such as timber, plywood and steel. It then focuses on Mivan technology, an advanced aluminum formwork system from Malaysia. The key components and working of the Mivan system are described. The advantages include light weight, high load capacity, reduced construction time and ability to be erected by unskilled labor. However, initial costs are higher and it may not be suitable for small projects. Overall, the Mivan system provides improved uniformity, quality and seismic resistance over conventional formworks.
IRJET- Experimental Study on Sandwich Panel using Sisal and Basalt FiberIRJET Journal
The document describes an experimental study on sandwich panels using sisal and basalt fibers. Sandwich panels consist of thin, high-strength skins bonded to a lightweight core. These panels provide high stiffness and strength while being lightweight. In the study, sisal fiber and basalt fiber were added to the cement mortar used to make the skins and core of sandwich panels to reduce weight without compromising strength. Various fiber contents were tested. Sandwich panels of size 1200x200x50mm with sisal fiber skins (2-3%), basalt fiber core (2-3.2%), and sisal fiber skins were produced. Compression, splitting tensile, and flexural tests showed that fiber addition increased panel strength compared
IRJET- An Experimental Study of Ductile Behavior of Ferrocement SlabIRJET Journal
The document presents the results of an experimental study on the ductile behavior of ferrocement slabs. Ferrocement slabs with different wire mesh spacings (2.5mm, 5mm, 7.5mm) and one with chicken wire mesh were tested. The slabs were 1.2m x 0.45m x 2.5cm in size and made with a 1:3 cement mortar mix. The slabs were tested in a loading frame and their load-deflection behaviors were recorded. The slab with chicken wire mesh showed the highest ultimate load of 3.6kN and breaking load of 4.5kN, indicating it had the highest strength. In general, the strength
IRJET- 3D Polysterene Wire Panel Construction SystemIRJET Journal
1. The document describes a 3D panel construction system that uses expanded polystyrene and steel wire to form insulated concrete panels for building walls, floors, and roofs.
2. The 3D panels provide strength, insulation, durability, and allow for fast construction times. They have advantages over traditional construction methods in terms of energy efficiency, costs, and design flexibility.
3. The 3D panel system has been used to construct thousands of buildings globally and is suitable for both residential and commercial construction projects.
Durability for Carbon Fiber Reinforced Polymers on Timber StructuresJBercot
A thesis presentation submitted in partial fulfilment of the requirements of the subject BEB801 – Project 1 in the Bachelor of Engineering Degree.
School of Civil Engineering & Built Environment,
Queensland University of Technology, June 2016
Building systems using Glass Fibre Reinforced Gypsum Panels.
This presentation brief about the manufacturing, suitabllity and use of GFRG panels for various components of building.
IRJET- Experimental Study on Strength and Durability of Bamboo Reinforced...IRJET Journal
The document presents the results of an experimental study on the flexural strength of bamboo reinforced concrete beams and the durability of bamboo as structural reinforcement.
Bamboo reinforced concrete beams were cast using normal bamboo and modified bamboo reinforcement at 1.25% and 2.50% reinforcement ratios. The flexural strength of the beams increased with curing time and the beams with 2.50% modified bamboo reinforcement performed best.
Bamboo splints with and without bitumen coating were subjected to alternate wetting and drying in water, magnesium sulphate, and potassium chloride solutions. The tensile strength of untreated bamboo splints reduced significantly after 56 cycles of exposure, indicating reduced durability. Treated bamboo performed better
Glass Fibre Reinforced Gypsum Panels By Raijul IslamMd Raijul Islam
This document discusses glass fibre reinforced gypsum (GFRG) panels, which are gypsum-based wall panels reinforced with glass fibre. GFRG panels provide advantages over conventional construction methods such as reducing construction time, costs, waste, and environmental impact. They are made from an industrial waste (gypsum) through a three stage process involving pouring and spreading gypsum mixtures and glass fibres between plugs to form hollow cavities. Buildings can be constructed using GFRG panels by erecting them on foundations and filling cavities with concrete to form integral walls, floors, and roofs. GFRG panel construction has potential to address housing shortages and environmental issues in developing countries like Bangladesh.
UNIT 1 INTRODUCTION | CE8022 PREFABRICATION STRUCTURES |Venkateswaran S
Presented about topics of Need for prefabrication – Principles of prefabrication – Modular coordination – Standarization – Materials – Systems – Production – Transportation – Erection as per anna university. CE8022 Prefabrication structures
Glass Fiber Reinforced Gypsum Panel use in Building ConstructionGRD Journals
This document summarizes research on the use of glass fiber reinforced gypsum (GFRG) wall panels in building construction as an alternative to conventional construction methods. Some key points:
1) GFRG panels are made of gypsum plaster reinforced with glass fibers. They are hollow and can be used as load-bearing walls. Concrete can be poured into the hollow cores to further increase strength.
2) Using GFRG panels can reduce construction costs by 20-30% compared to conventional methods. Construction time is also significantly reduced.
3) GFRG walls provide benefits like increased fire resistance, earthquake resistance, cooling effects, and longer lifespan compared to conventional walls.
4) Case studies and
GFRG superior than conventional construction. The GFRG are panels economical and Eco-friendly. This technology has been used by Australian’s since 1990’s only as walls. These panels are precast in factories, transported to construction site and erected with the help of crane.
Modern construction technology (MCT) is a collective term used to describe a number of construction methods. These methods differ from so-called conventional construction methods such as brick and block.
IRJET- Behavioural Study of Concrete Beam with Bamboo Reinforcement and P...IRJET Journal
This document discusses a study on the behavioral properties of concrete beams reinforced with bamboo sticks instead of steel reinforcement. The researchers tested three concrete beams - one with steel reinforcement and two with bamboo reinforcement. They found that the bamboo reinforced beams exhibited higher flexural strength than the steel reinforced beam. Specifically, the maximum load the bamboo reinforced beam could withstand was 21.67 kilonewtons, compared to 14.18 kilonewtons for the steel reinforced beam. The study thus demonstrates that bamboo is a viable, lower cost alternative to steel for reinforcing concrete beams in structures like single-story buildings.
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
PDF SubmissionDigital Marketing Institute in NoidaPoojaSaini954651
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
Technoblade The Legacy of a Minecraft Legend.Techno Merch
Technoblade, born Alex on June 1, 1999, was a legendary Minecraft YouTuber known for his sharp wit and exceptional PvP skills. Starting his channel in 2013, he gained nearly 11 million subscribers. His private battle with metastatic sarcoma ended in June 2022, but his enduring legacy continues to inspire millions.
International Upcycling Research Network advisory board meeting 4Kyungeun Sung
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
IRJET- An Experimental Study of Ductile Behavior of Ferrocement SlabIRJET Journal
The document presents the results of an experimental study on the ductile behavior of ferrocement slabs. Ferrocement slabs with different wire mesh spacings (2.5mm, 5mm, 7.5mm) and one with chicken wire mesh were tested. The slabs were 1.2m x 0.45m x 2.5cm in size and made with a 1:3 cement mortar mix. The slabs were tested in a loading frame and their load-deflection behaviors were recorded. The slab with chicken wire mesh showed the highest ultimate load of 3.6kN and breaking load of 4.5kN, indicating it had the highest strength. In general, the strength
IRJET- 3D Polysterene Wire Panel Construction SystemIRJET Journal
1. The document describes a 3D panel construction system that uses expanded polystyrene and steel wire to form insulated concrete panels for building walls, floors, and roofs.
2. The 3D panels provide strength, insulation, durability, and allow for fast construction times. They have advantages over traditional construction methods in terms of energy efficiency, costs, and design flexibility.
3. The 3D panel system has been used to construct thousands of buildings globally and is suitable for both residential and commercial construction projects.
Durability for Carbon Fiber Reinforced Polymers on Timber StructuresJBercot
A thesis presentation submitted in partial fulfilment of the requirements of the subject BEB801 – Project 1 in the Bachelor of Engineering Degree.
School of Civil Engineering & Built Environment,
Queensland University of Technology, June 2016
Building systems using Glass Fibre Reinforced Gypsum Panels.
This presentation brief about the manufacturing, suitabllity and use of GFRG panels for various components of building.
IRJET- Experimental Study on Strength and Durability of Bamboo Reinforced...IRJET Journal
The document presents the results of an experimental study on the flexural strength of bamboo reinforced concrete beams and the durability of bamboo as structural reinforcement.
Bamboo reinforced concrete beams were cast using normal bamboo and modified bamboo reinforcement at 1.25% and 2.50% reinforcement ratios. The flexural strength of the beams increased with curing time and the beams with 2.50% modified bamboo reinforcement performed best.
Bamboo splints with and without bitumen coating were subjected to alternate wetting and drying in water, magnesium sulphate, and potassium chloride solutions. The tensile strength of untreated bamboo splints reduced significantly after 56 cycles of exposure, indicating reduced durability. Treated bamboo performed better
Glass Fibre Reinforced Gypsum Panels By Raijul IslamMd Raijul Islam
This document discusses glass fibre reinforced gypsum (GFRG) panels, which are gypsum-based wall panels reinforced with glass fibre. GFRG panels provide advantages over conventional construction methods such as reducing construction time, costs, waste, and environmental impact. They are made from an industrial waste (gypsum) through a three stage process involving pouring and spreading gypsum mixtures and glass fibres between plugs to form hollow cavities. Buildings can be constructed using GFRG panels by erecting them on foundations and filling cavities with concrete to form integral walls, floors, and roofs. GFRG panel construction has potential to address housing shortages and environmental issues in developing countries like Bangladesh.
UNIT 1 INTRODUCTION | CE8022 PREFABRICATION STRUCTURES |Venkateswaran S
Presented about topics of Need for prefabrication – Principles of prefabrication – Modular coordination – Standarization – Materials – Systems – Production – Transportation – Erection as per anna university. CE8022 Prefabrication structures
Glass Fiber Reinforced Gypsum Panel use in Building ConstructionGRD Journals
This document summarizes research on the use of glass fiber reinforced gypsum (GFRG) wall panels in building construction as an alternative to conventional construction methods. Some key points:
1) GFRG panels are made of gypsum plaster reinforced with glass fibers. They are hollow and can be used as load-bearing walls. Concrete can be poured into the hollow cores to further increase strength.
2) Using GFRG panels can reduce construction costs by 20-30% compared to conventional methods. Construction time is also significantly reduced.
3) GFRG walls provide benefits like increased fire resistance, earthquake resistance, cooling effects, and longer lifespan compared to conventional walls.
4) Case studies and
GFRG superior than conventional construction. The GFRG are panels economical and Eco-friendly. This technology has been used by Australian’s since 1990’s only as walls. These panels are precast in factories, transported to construction site and erected with the help of crane.
Modern construction technology (MCT) is a collective term used to describe a number of construction methods. These methods differ from so-called conventional construction methods such as brick and block.
IRJET- Behavioural Study of Concrete Beam with Bamboo Reinforcement and P...IRJET Journal
This document discusses a study on the behavioral properties of concrete beams reinforced with bamboo sticks instead of steel reinforcement. The researchers tested three concrete beams - one with steel reinforcement and two with bamboo reinforcement. They found that the bamboo reinforced beams exhibited higher flexural strength than the steel reinforced beam. Specifically, the maximum load the bamboo reinforced beam could withstand was 21.67 kilonewtons, compared to 14.18 kilonewtons for the steel reinforced beam. The study thus demonstrates that bamboo is a viable, lower cost alternative to steel for reinforcing concrete beams in structures like single-story buildings.
Explore the essential graphic design tools and software that can elevate your creative projects. Discover industry favorites and innovative solutions for stunning design results.
PDF SubmissionDigital Marketing Institute in NoidaPoojaSaini954651
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
Decormart Studio is widely recognized as one of the best interior designers in Bangalore, known for their exceptional design expertise and ability to create stunning, functional spaces. With a strong focus on client preferences and timely project delivery, Decormart Studio has built a solid reputation for their innovative and personalized approach to interior design.
Technoblade The Legacy of a Minecraft Legend.Techno Merch
Technoblade, born Alex on June 1, 1999, was a legendary Minecraft YouTuber known for his sharp wit and exceptional PvP skills. Starting his channel in 2013, he gained nearly 11 million subscribers. His private battle with metastatic sarcoma ended in June 2022, but his enduring legacy continues to inspire millions.
International Upcycling Research Network advisory board meeting 4Kyungeun Sung
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
ARENA - Young adults in the workplace (Knight Moves).pdfKnight Moves
Presentations of Bavo Raeymaekers (Project lead youth unemployment at the City of Antwerp), Suzan Martens (Service designer at Knight Moves) and Adriaan De Keersmaeker (Community manager at Talk to C)
during the 'Arena • Young adults in the workplace' conference hosted by Knight Moves.
Practical eLearning Makeovers for EveryoneBianca Woods
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page pmgdscunsri
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
Connect Conference 2022: Passive House - Economic and Environmental Solution...TE Studio
Passive House: The Economic and Environmental Solution for Sustainable Real Estate. Lecture by Tim Eian of TE Studio Passive House Design in November 2022 in Minneapolis.
- The Built Environment
- Let's imagine the perfect building
- The Passive House standard
- Why Passive House targets
- Clean Energy Plans?!
- How does Passive House compare and fit in?
- The business case for Passive House real estate
- Tools to quantify the value of Passive House
- What can I do?
- Resources
2. Features
• Simple one handed operation with೦re-chargeable batteries.
• Supplied with 2 batteries and high speed 240volt charger೦
• Hard plastic carry case
• Easy to train unskilled workers
• Only weighs 2.1 kg
3. Uses
• Fastening tiying of mesh sheet
• Fixing floor cable heating to mes