Here is your complete guide to different types of Roxtec cable entry seals. Excel Automation is an authorized distributor of all products by Roxtec. For more details, visit: www.excelautomationinc.com/product-category/roxtec-cable-entry
Este documento presenta el catálogo de productos de POLIFLEX, una empresa líder mexicana en la producción de poliducto corrugado flexible para instalaciones eléctricas. Ofrece una variedad de productos para la construcción, incluyendo poliductos naranja, rojo extra resistente y negro automotriz/electrónico ranurado. Describe las especificaciones y aplicaciones de cada producto, así como accesorios como chalupas, cajas y lubricante.
Equipment Health Monitoring- Proximity SensorAsha232369
This document provides information on the operation of proximity transducer systems used for non-contact displacement and vibration measurement. It describes the main components, which include a probe, extension cable, and proximitor. An RF signal is transmitted from the probe to induce eddy currents in a target material. The proximitor measures changes in the reflected signal due to gaps in the target to determine displacement or vibration. The document outlines calibration procedures and factors that affect system performance such as supply voltage, component matching, and target material properties.
This document provides installation instructions for heatshrink joints for 3 core 7.2/12kV XLPE armoured cable. The instructions describe 19 steps for preparing the cable ends, applying stress control tubes and mastic tapes, fitting compression connectors, applying copper mesh and armour clamps, and shrinking outer heatshrink tubes. Key steps include preparing cable ends to specified dimensions, removing semi-conductive layers from cores, fitting stress control and dual wall heatshrink tubes in stages while applying mastic tapes, and fully recovering two outer heatshrink tubes to seal the completed joint. The instructions are intended for trained competent jointers and call for using a propane gas torch to shrink the heatshrink materials.
Este documento establece las disposiciones generales para los locales de subestación tipo interior. Define términos como subestación, bóveda, tablero y persona calificada. Describe los requisitos para dimensiones, accesos, materiales de construcción, iluminación, ventilación, drenaje, señalización y seguridad contra incendios de los locales de subestación. Establece que los transformadores deben instalarse en bóvedas cuando pesen más de 700kg y prohíbe la instalación de transformadores con aceite en pisos superi
Este documento es un catálogo de productos de IBERSOLAR Energía que describe varios modelos de colectores solares térmicos y termosifones. Incluye datos técnicos detallados sobre las características de los colectores como el tamaño, peso, materiales y curvas de rendimiento. También proporciona especificaciones para diferentes modelos de termosifones con capacidades de depósito que van desde 125 a 300 litros.
This document provides information on sizing junction boxes and determining conductor bending radii according to NEC standards. It discusses the definitions and formulas for calculating junction box length and width based on conduit sizes and configurations. Minimum bending radii requirements are presented for various sized conductors and fiber optic cables. Quiz questions are also included at the end to test comprehension.
Trunking is an enclosure used to protect cables. It is rectangular in cross-section with a removable side. There are different types of trunking including metallic, PVC, and bus-bar trunking. Metallic trunking is used extensively in industrial settings while PVC trunking is common in homes and offices. Trunking must be properly supported, installed, and have a space factor below 45% to safely house cables.
Roxtec Cable and Pipe Transits for Marine ApplicationsAnnaAbdiel
Know here about some of the applications of the Roxtec sealing system in the marine industry where Roxtec cable and pipe transits are used to protect life and sensitive equipment. Excel Automation is an authorized distributor of all Roxtec products. For all your cable entry system and sealing needs contact Excel Automation Today!! www.excelautomationinc.com
Este documento presenta el catálogo de productos de POLIFLEX, una empresa líder mexicana en la producción de poliducto corrugado flexible para instalaciones eléctricas. Ofrece una variedad de productos para la construcción, incluyendo poliductos naranja, rojo extra resistente y negro automotriz/electrónico ranurado. Describe las especificaciones y aplicaciones de cada producto, así como accesorios como chalupas, cajas y lubricante.
Equipment Health Monitoring- Proximity SensorAsha232369
This document provides information on the operation of proximity transducer systems used for non-contact displacement and vibration measurement. It describes the main components, which include a probe, extension cable, and proximitor. An RF signal is transmitted from the probe to induce eddy currents in a target material. The proximitor measures changes in the reflected signal due to gaps in the target to determine displacement or vibration. The document outlines calibration procedures and factors that affect system performance such as supply voltage, component matching, and target material properties.
This document provides installation instructions for heatshrink joints for 3 core 7.2/12kV XLPE armoured cable. The instructions describe 19 steps for preparing the cable ends, applying stress control tubes and mastic tapes, fitting compression connectors, applying copper mesh and armour clamps, and shrinking outer heatshrink tubes. Key steps include preparing cable ends to specified dimensions, removing semi-conductive layers from cores, fitting stress control and dual wall heatshrink tubes in stages while applying mastic tapes, and fully recovering two outer heatshrink tubes to seal the completed joint. The instructions are intended for trained competent jointers and call for using a propane gas torch to shrink the heatshrink materials.
Este documento establece las disposiciones generales para los locales de subestación tipo interior. Define términos como subestación, bóveda, tablero y persona calificada. Describe los requisitos para dimensiones, accesos, materiales de construcción, iluminación, ventilación, drenaje, señalización y seguridad contra incendios de los locales de subestación. Establece que los transformadores deben instalarse en bóvedas cuando pesen más de 700kg y prohíbe la instalación de transformadores con aceite en pisos superi
Este documento es un catálogo de productos de IBERSOLAR Energía que describe varios modelos de colectores solares térmicos y termosifones. Incluye datos técnicos detallados sobre las características de los colectores como el tamaño, peso, materiales y curvas de rendimiento. También proporciona especificaciones para diferentes modelos de termosifones con capacidades de depósito que van desde 125 a 300 litros.
This document provides information on sizing junction boxes and determining conductor bending radii according to NEC standards. It discusses the definitions and formulas for calculating junction box length and width based on conduit sizes and configurations. Minimum bending radii requirements are presented for various sized conductors and fiber optic cables. Quiz questions are also included at the end to test comprehension.
Trunking is an enclosure used to protect cables. It is rectangular in cross-section with a removable side. There are different types of trunking including metallic, PVC, and bus-bar trunking. Metallic trunking is used extensively in industrial settings while PVC trunking is common in homes and offices. Trunking must be properly supported, installed, and have a space factor below 45% to safely house cables.
Roxtec Cable and Pipe Transits for Marine ApplicationsAnnaAbdiel
Know here about some of the applications of the Roxtec sealing system in the marine industry where Roxtec cable and pipe transits are used to protect life and sensitive equipment. Excel Automation is an authorized distributor of all Roxtec products. For all your cable entry system and sealing needs contact Excel Automation Today!! www.excelautomationinc.com
The document provides an overview of Dunham-Bush, a global HVAC manufacturer with a 121-year history. It details the company's origins and acquisitions over time. It then outlines Dunham-Bush's current global operations, manufacturing facilities, product ranges covering chillers, air handling units, and other specialized equipment. The document concludes with examples of projects utilizing Dunham-Bush equipment across various market sectors.
Intrusive vs. Non-Intrusive Electric Actuators: Which option is right for you...Mead O'Brien, Inc.
Modern electric actuators offer a wide range of technologies and features, from basic motor controls to sophisticated electronic controls. Many choices are available, since no single design or feature set meets the needs of every application.
El documento proporciona información sobre cercas eléctricas. Describe cómo funcionan los sistemas de cercas eléctricas, incluidos los componentes clave como el energizador, los aisladores, los conductores y la instalación. También explica los riesgos eléctricos asociados y cómo las cercas eléctricas brindan seguridad sin ser letales.
ACOMODO DE LOS CABLES EN EL DUCTO.
PORCENTAJE MÁXIMO DE LLENADO DE CABLES EN DUCTO.
ATASCAMIENTO DE CABLES EN DUCTO.
RADIO MÍNIMO DE CURVATURA DURANTE Y DESPUÉS DE INSTALACIÓN.
TENSIÓN MÁXIMA DE JALADO DEL CONDUCTOR.
FORMULA PARA CALCULAR LA TENSIÓN DE JALADO EN TRAMO RECTO INCLINADO HACIA ARRIBA.
FORMULA PARA CALCULAR LA TENSIÓN DE JALADO EN TRAMO RECTO INCLINADO HACIA ABAJO.
CURVAS VERTICALES INCOMPLETAS.
Este documento contiene una lista de productos de iluminación, incluyendo lámparas de escritorio, lámparas de mesa y linternas. La mayoría de los productos son lámparas LED con diferentes tamaños, colores y funciones como luz atenuable, cargador USB integrado y encendido táctil.
Este documento presenta información sobre acoples flexibles de la serie XAC/XSS fabricados por Eaton para su uso en áreas clasificadas. Incluye detalles sobre las aplicaciones, características, materiales, certificaciones y tamaños disponibles de 1/2" a 4" NPT. También proporciona una tabla con las designaciones completas y dimensiones de cada acople flexible.
Este documento establece las normas técnicas para el diseño de plantas externas de redes de telecomunicaciones con cables de cobre. Describe los elementos clave de la red como el distribuidor principal, armarios, cajas de dispersión y líneas de conexión. También cubre temas como el diseño de la red, parámetros a considerar como la demanda y factores de crecimiento, y recomendaciones generales para el diseño de la planta externa.
El documento presenta el diseño de una instalación eléctrica doméstica. Explica que primero se debe hacer un esquema de la distribución de puntos de luz, interruptores y tomacorrientes. Luego, se seleccionan los conductores según la carga de cada circuito y se realiza el cableado, colocando cajas para interruptores y accesorios. Finalmente, se conecta todo al tablero eléctrico principal de la vivienda.
This document provides an overview of ABB's industrial plugs and sockets product range. It describes the three product categories - Critical & Safe for highest safety, Tough & Safe for demanding applications, and Easy & Safe for adequate functionality. It also outlines key features including IP ratings, self-cleaning contacts, stainless steel screws, terminal markings, and pilot contacts on higher current products. The document acts as a catalog, listing various plugs, sockets, connectors, and accessories along with their types and intended uses.
El documento describe la evolución de los hornos de barro a través de la historia, desde su invención en Egipto hace aproximadamente 5000 años a.C. hasta los hornos modernos semi-automáticos e industriales de hoy en día. Explica cómo los hornos de barro se expandieron desde Egipto a Argentina y las Américas, y cómo fueron adoptados por criollos y españoles. También describe los componentes básicos de los hornos de barro tradicionales y los avances tecnológicos que llevaron al desarrollo
GRILLETE ALTA RESISTENCIA
OTROS TERMINALES Y CONECTORES
TENSORES FORJADOS
CONECTOR TERMINAL RÁPIDO
POLEAS DE BISAGRA
https://cfblasant.com/productos/accesorios-alta-resistencia-elevacion-cargas/
La telefonía fija utiliza una red conmutada de telecomunicaciones para transmitir voz en tiempo real entre dos terminales fijos. La planta telefónica incluye elementos internos como la central telefónica y elementos externos como cables, armarios de distribución y terminales. La central telefónica alberga el equipo de conmutación y transmisión necesario para establecer llamadas entre abonados.
O documento fornece especificações e instruções de montagem para caixas acústicas de graves e subgraves fabricadas pela Selenium. Inclui modelos HB1502B1, HB1505D1 e HB1805C1, com sugestões de empilhamento e detalhes técnicos de cada modelo, como dimensões, componentes e esquemas.
Portones Vehiculares de Alta Seguridad - Wallace Perimeter SecurityAlse Mexicana
Este documento presenta varios modelos de portones vehiculares de alta seguridad fabricados por Wallace Perimeter Security. Describe las características y beneficios de las series PDXT, PDTT, Alpha, Delta y FoldSmart, incluyendo su velocidad, resistencia y bajo mantenimiento. También menciona puertas interiores para control de acceso peatonal.
Cost Estimation for Electrical Wiring of A Hospital.pptxMDSADMANRAFID
This document provides a cost estimation for the electrical wiring of a hospital considering safety issues. It includes calculations for the lighting requirements of various rooms in the hospital based on their size and recommended illumination levels. Additional electrical loads such as fans, appliances and medical equipment for each room are also listed. Assumptions are provided for factors like utilization rate, depreciation, and wire sizing. Calculations are shown for determining the number and wattage of lights needed in each room to meet the illumination requirements.
Las estaciones terrenas son conjuntos de equipos que permiten la comunicación directa con satélites para enviar o recibir información. Estas estaciones contienen antenas, sistemas de seguimiento, equipos de radiofrecuencia y procesamiento de señales. El documento describe los componentes clave de las estaciones terrenas y varias estaciones ubicadas en Barquisimeto, Venezuela como las del edificio El Impulso, Centro Empresarial Caracas e Inter Barquisimeto.
Este documento presenta una guía para el diseño de una red de planta externa. Explica que la planta externa incluye toda la infraestructura exterior como postes, cables y conexiones que prestan servicios de telecomunicaciones y energía. Detalla los elementos clave de una red de planta externa como la red primaria, secundaria, armarios, cajas de dispersión y líneas de conexión. También compara las ventajas e inconvenientes de las redes con fibra óptica versus cables metálicos. Finalmente, concluye que
El documento presenta el catálogo de productos y servicios de Fundiherrajes de Colombia Ltda., una empresa dedicada al diseño, fabricación y comercialización de herrajes y estructuras metálicas. La empresa cuenta con más de 28 líneas de productos certificados y ofrece una amplia gama de herrajes para líneas de transmisión y distribución de energía eléctrica. El catálogo describe las especificaciones técnicas de los productos de acuerdo con las normas aplicables.
Este documento presenta especificaciones técnicas para diversos tipos de estructuras físicas de diseño en media y baja tensión, incluyendo herrajes para postes de paso, terminales, abertura y derivación, así como detalles de los componentes requeridos para cada una. Se describen 14 tipos de herrajes para postes de paso BT, 5 para postes terminales BT, 5 para postes en abertura BT y 5 diseños para derivaciones MT con aisladores de suspensión, pin o bifásicas.
Roxtec is a world leader in sealing solutions for multiple cables and pipes. They provide flexible sealing systems that allow for easy installation of cables today and expansion tomorrow. Their solutions include cable entry seals for cabinets, bonding and grounding products, and EMC shielding solutions. They also offer the Roxtec Transit Designer online tool to help customers select and design sealing solutions.
-A truly flexible sealing system
-No need to cut off connectors
-Maximise space in cabinets
-Certified protection
-Bonding & Grounding solutions
-EMC solutions
The document provides an overview of Dunham-Bush, a global HVAC manufacturer with a 121-year history. It details the company's origins and acquisitions over time. It then outlines Dunham-Bush's current global operations, manufacturing facilities, product ranges covering chillers, air handling units, and other specialized equipment. The document concludes with examples of projects utilizing Dunham-Bush equipment across various market sectors.
Intrusive vs. Non-Intrusive Electric Actuators: Which option is right for you...Mead O'Brien, Inc.
Modern electric actuators offer a wide range of technologies and features, from basic motor controls to sophisticated electronic controls. Many choices are available, since no single design or feature set meets the needs of every application.
El documento proporciona información sobre cercas eléctricas. Describe cómo funcionan los sistemas de cercas eléctricas, incluidos los componentes clave como el energizador, los aisladores, los conductores y la instalación. También explica los riesgos eléctricos asociados y cómo las cercas eléctricas brindan seguridad sin ser letales.
ACOMODO DE LOS CABLES EN EL DUCTO.
PORCENTAJE MÁXIMO DE LLENADO DE CABLES EN DUCTO.
ATASCAMIENTO DE CABLES EN DUCTO.
RADIO MÍNIMO DE CURVATURA DURANTE Y DESPUÉS DE INSTALACIÓN.
TENSIÓN MÁXIMA DE JALADO DEL CONDUCTOR.
FORMULA PARA CALCULAR LA TENSIÓN DE JALADO EN TRAMO RECTO INCLINADO HACIA ARRIBA.
FORMULA PARA CALCULAR LA TENSIÓN DE JALADO EN TRAMO RECTO INCLINADO HACIA ABAJO.
CURVAS VERTICALES INCOMPLETAS.
Este documento contiene una lista de productos de iluminación, incluyendo lámparas de escritorio, lámparas de mesa y linternas. La mayoría de los productos son lámparas LED con diferentes tamaños, colores y funciones como luz atenuable, cargador USB integrado y encendido táctil.
Este documento presenta información sobre acoples flexibles de la serie XAC/XSS fabricados por Eaton para su uso en áreas clasificadas. Incluye detalles sobre las aplicaciones, características, materiales, certificaciones y tamaños disponibles de 1/2" a 4" NPT. También proporciona una tabla con las designaciones completas y dimensiones de cada acople flexible.
Este documento establece las normas técnicas para el diseño de plantas externas de redes de telecomunicaciones con cables de cobre. Describe los elementos clave de la red como el distribuidor principal, armarios, cajas de dispersión y líneas de conexión. También cubre temas como el diseño de la red, parámetros a considerar como la demanda y factores de crecimiento, y recomendaciones generales para el diseño de la planta externa.
El documento presenta el diseño de una instalación eléctrica doméstica. Explica que primero se debe hacer un esquema de la distribución de puntos de luz, interruptores y tomacorrientes. Luego, se seleccionan los conductores según la carga de cada circuito y se realiza el cableado, colocando cajas para interruptores y accesorios. Finalmente, se conecta todo al tablero eléctrico principal de la vivienda.
This document provides an overview of ABB's industrial plugs and sockets product range. It describes the three product categories - Critical & Safe for highest safety, Tough & Safe for demanding applications, and Easy & Safe for adequate functionality. It also outlines key features including IP ratings, self-cleaning contacts, stainless steel screws, terminal markings, and pilot contacts on higher current products. The document acts as a catalog, listing various plugs, sockets, connectors, and accessories along with their types and intended uses.
El documento describe la evolución de los hornos de barro a través de la historia, desde su invención en Egipto hace aproximadamente 5000 años a.C. hasta los hornos modernos semi-automáticos e industriales de hoy en día. Explica cómo los hornos de barro se expandieron desde Egipto a Argentina y las Américas, y cómo fueron adoptados por criollos y españoles. También describe los componentes básicos de los hornos de barro tradicionales y los avances tecnológicos que llevaron al desarrollo
GRILLETE ALTA RESISTENCIA
OTROS TERMINALES Y CONECTORES
TENSORES FORJADOS
CONECTOR TERMINAL RÁPIDO
POLEAS DE BISAGRA
https://cfblasant.com/productos/accesorios-alta-resistencia-elevacion-cargas/
La telefonía fija utiliza una red conmutada de telecomunicaciones para transmitir voz en tiempo real entre dos terminales fijos. La planta telefónica incluye elementos internos como la central telefónica y elementos externos como cables, armarios de distribución y terminales. La central telefónica alberga el equipo de conmutación y transmisión necesario para establecer llamadas entre abonados.
O documento fornece especificações e instruções de montagem para caixas acústicas de graves e subgraves fabricadas pela Selenium. Inclui modelos HB1502B1, HB1505D1 e HB1805C1, com sugestões de empilhamento e detalhes técnicos de cada modelo, como dimensões, componentes e esquemas.
Portones Vehiculares de Alta Seguridad - Wallace Perimeter SecurityAlse Mexicana
Este documento presenta varios modelos de portones vehiculares de alta seguridad fabricados por Wallace Perimeter Security. Describe las características y beneficios de las series PDXT, PDTT, Alpha, Delta y FoldSmart, incluyendo su velocidad, resistencia y bajo mantenimiento. También menciona puertas interiores para control de acceso peatonal.
Cost Estimation for Electrical Wiring of A Hospital.pptxMDSADMANRAFID
This document provides a cost estimation for the electrical wiring of a hospital considering safety issues. It includes calculations for the lighting requirements of various rooms in the hospital based on their size and recommended illumination levels. Additional electrical loads such as fans, appliances and medical equipment for each room are also listed. Assumptions are provided for factors like utilization rate, depreciation, and wire sizing. Calculations are shown for determining the number and wattage of lights needed in each room to meet the illumination requirements.
Las estaciones terrenas son conjuntos de equipos que permiten la comunicación directa con satélites para enviar o recibir información. Estas estaciones contienen antenas, sistemas de seguimiento, equipos de radiofrecuencia y procesamiento de señales. El documento describe los componentes clave de las estaciones terrenas y varias estaciones ubicadas en Barquisimeto, Venezuela como las del edificio El Impulso, Centro Empresarial Caracas e Inter Barquisimeto.
Este documento presenta una guía para el diseño de una red de planta externa. Explica que la planta externa incluye toda la infraestructura exterior como postes, cables y conexiones que prestan servicios de telecomunicaciones y energía. Detalla los elementos clave de una red de planta externa como la red primaria, secundaria, armarios, cajas de dispersión y líneas de conexión. También compara las ventajas e inconvenientes de las redes con fibra óptica versus cables metálicos. Finalmente, concluye que
El documento presenta el catálogo de productos y servicios de Fundiherrajes de Colombia Ltda., una empresa dedicada al diseño, fabricación y comercialización de herrajes y estructuras metálicas. La empresa cuenta con más de 28 líneas de productos certificados y ofrece una amplia gama de herrajes para líneas de transmisión y distribución de energía eléctrica. El catálogo describe las especificaciones técnicas de los productos de acuerdo con las normas aplicables.
Este documento presenta especificaciones técnicas para diversos tipos de estructuras físicas de diseño en media y baja tensión, incluyendo herrajes para postes de paso, terminales, abertura y derivación, así como detalles de los componentes requeridos para cada una. Se describen 14 tipos de herrajes para postes de paso BT, 5 para postes terminales BT, 5 para postes en abertura BT y 5 diseños para derivaciones MT con aisladores de suspensión, pin o bifásicas.
Roxtec is a world leader in sealing solutions for multiple cables and pipes. They provide flexible sealing systems that allow for easy installation of cables today and expansion tomorrow. Their solutions include cable entry seals for cabinets, bonding and grounding products, and EMC shielding solutions. They also offer the Roxtec Transit Designer online tool to help customers select and design sealing solutions.
-A truly flexible sealing system
-No need to cut off connectors
-Maximise space in cabinets
-Certified protection
-Bonding & Grounding solutions
-EMC solutions
Roxtec Cable Entry Seals for Every IndustryAnnaAbdiel
Roxtec sealing solutions are used in a wide range of industries and applications. You find Roxtec seals for cabinets and enclosures in demanding environments on land and sea all over the world. To know more about the multipurpose Roxtec Cable Entry Seal which is perfect for every industry, visit: www.excelautomationinc.com/product-category/roxtec-cable-entry
Roxtec provides sealing solutions for cable and pipe transits for offshore power applications. They offer multi-cable and pipe transits that handle various cable and pipe sizes, provide certification for fire resistance and hazardous locations, and allow for flexibility through modular components. Their solutions standardize sealing design for efficiency and help reduce costs through services for product selection and transit design.
The document discusses Roxtec's cable and pipe transit solutions for offshore power applications. It provides an overview of Roxtec's products and capabilities including multi-cable transits, sealing solutions, and services to standardize sealing and simplify design, installation and maintenance for offshore substations, converter stations, and other power facilities. The document also highlights Roxtec's testing and certification of its products as well as its software and design services.
Roxtec provides modular sealing solutions for cable and pipe penetrations that are fire resistant, waterproof, and gas tight, protecting buildings from hazards, and their solutions are certified according to international standards; their seals can be used in walls, floors, round openings, cabinets, underground applications and hazardous areas; they also offer customized solutions and engineering support for unique sealing challenges.
This document provides information about Roxtec, a leading provider of multi-cable and pipe transits for onshore oil, gas, and petrochemical applications. It discusses Roxtec's history and certifications. It then describes Roxtec's complete sealing solutions for cables and pipes penetrating walls, floors, cabinets, and round openings. Roxtec solutions are tested and certified to international standards and can accommodate high cable and pipe densities in a small space. The document also discusses Roxtec's hazardous location and bonding/grounding product families.
Roxtec is a leading provider of multi-cable and pipe transits for onshore oil, gas, and petrochemical applications. They offer sealing solutions that ensure reliability, simplify expansion, and reduce maintenance costs. Their systems are designed to meet diverse safety needs and regulations around the world through their wide range of certified products. Roxtec solutions allow for high cable density and flexibility to accommodate changes through modular components for walls, floors, cabinets, and other applications.
Roxtec power transmission & dristributionRADOME-IT
Roxtec provides cable sealing solutions for power transmission and distribution applications. They offer seals that protect against fire, pests, noise, vibration, lightning, EMI, explosions, dust, gases, water and more. Roxtec seals are flexible and can be customized for various applications including substations, buildings, underground installations, cabinets and retrofit projects. They have solutions for cable, pipe and duct penetrations through walls, floors and more.
The Roxtec sealing system allows cables with connectors to be routed through openings, avoiding having to detach and reattach connectors. This saves substantial time during installation and reduces risks. Roxtec seals enable routing multiple cables through a single opening, allowing for smaller, more efficient enclosures. Their flexibility accommodates various cable sizes now and in the future through removable layers in the seals.
The Roxtec Transit Designer is a software tool that simplifies the selection, design, purchase, and installation of Roxtec cable and pipe transits. It allows users to easily design transits for their projects, import designs in batches, and automatically validate the designs. The software provides Roxtec CAD symbols to incorporate transits into the overall design of ships and vessels. The Transit Designer is accessible online, allowing for worldwide collaboration, and Roxtec experts are available to assist users through a chat function.
Roxtec provides sealing solutions for cables and pipes used in military vehicles, buildings, and communication systems. Their flexible sealing system protects life and equipment from damage, ensuring reliability, efficiency, and safety. Roxtec seals are customized, tested, and certified to be gas-tight, fire-proof, and able to withstand vibrations, emissions, and more. They maintain a global presence to support customers worldwide.
This document summarizes Roxtec's cable and pipe sealing solutions for the oil and gas industry. Roxtec provides flexible sealing systems that have been tested and certified to protect against hazards like fire, smoke, gas, water, and explosions. Their sealing systems use removable layers to adapt to pipes and cables of various sizes. Roxtec works with many major oil and gas companies and has a global presence to support customers worldwide.
Roxtec provides cable and pipe sealing solutions for drill ships that ensure safety, reliability, and efficiency. Their seals are certified to withstand tough offshore conditions and protect against risks like fire, explosions, and water. Roxtec's solutions simplify installation and modifications while reducing costs, and many can adapt to cables and pipes of various sizes and materials. With a local presence in 70 markets worldwide, Roxtec helps vessels safely and reliably transmit cables and pipes.
Roxtec provides certified cable and pipe sealing solutions that protect against risks like fire, gas pressure, and water damage on offshore rigs. Their modular seals are adaptable to different cable and pipe sizes, easy to install, and allow for efficient upgrades. Roxtec has a global presence with local stock and support to ensure safety, reliability, and efficiency.
The document summarizes Roxtec BGTM sealing solutions for bonding and grounding metal clad and armor cables. The Roxtec BGTM product family seals a maximum number of cables in minimal space, saves on design and installation time and costs. It has a wide range of applications and provides certified electrical safety, environmental protection, and bonding/grounding for various cable types. The solutions are highly efficient and flexible with easy installation.
Roxtec provides cable and pipe sealing solutions for the offshore oil and gas industry. They are the world leader in seals for multiple cables and pipes, with products certified according to safety and quality standards. Roxtec seals protect against hazards like fire, water, gas, and vibration throughout the lifecycle of offshore rigs, from initial design and installation to maintenance and upgrades.
Roxtec provides cable and pipe sealing solutions for offshore oil and gas applications. They are the world leader in seals for multiple cables and pipes, with products certified according to safety and quality standards. Roxtec seals protect against hazards like fire, water, gas, and vibration throughout the lifecycle of offshore rigs and vessels, from initial design and installation through maintenance and retrofits.
Roxtec provides cable and pipe sealing solutions for offshore floating production storage and offloading (FPSO) vessels. Their seals are designed to withstand tough offshore conditions and protect against risks like fire, explosions, and water ingress. The seals are certified by major classification societies. Roxtec's solutions simplify installation and allow for easy modifications. They also provide built-in capacity for future upgrades. Roxtec has local presence in over 70 markets worldwide to ensure product availability and support.
Roxtec cable and pipe transits are used extensively on offshore rigs to ensure safety and reliability. Their seals are designed to withstand tough offshore conditions and are certified by major classification societies. Roxtec solutions simplify installation and reduce costs through standardized, modular designs that accommodate future upgrades. Roxtec has a global presence to provide local support and availability of products.
Similar to Your Complete Guide To Roxtec Cable Entry Seals for Cabinets (20)
Industrial Tech SW: Category Renewal and CreationChristian Dahlen
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
The 10 Most Influential Leaders Guiding Corporate Evolution, 2024.pdfthesiliconleaders
In the recent edition, The 10 Most Influential Leaders Guiding Corporate Evolution, 2024, The Silicon Leaders magazine gladly features Dejan Štancer, President of the Global Chamber of Business Leaders (GCBL), along with other leaders.
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...ABHILASH DUTTA
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
buy old yahoo accounts buy yahoo accountsSusan Laney
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Your Complete Guide To Roxtec Cable Entry Seals for Cabinets
1. We Seal Your World™
CABINETSCABLE ENTRY SEALS
FOR CABINETS AND ENCLOSURES
2. ABOUT ROXTEC■
■ World leader in seals for multiple cables and pipes■
■ Founded in Sweden in 1990■
■ Inventor of Multidiameter™■
■ Local support in more than 80 markets■
■ Certified according to ISO 9001/14001 and EN 13980■
■ More than 285 product certifications and safety listings
3. A truly flexible sealing system 4
No more cutting off connectors 5
More cable, less cabinet 6
Certified protection 7
Roxtec cable sealing solutions for every industry 8
Roxtec solutions for bonding, grounding 12
Roxtec EMC solutions 13
Roxtec Transit Designer™ 14
We create customized solutions 15
Roxtec cabinet seal selection guide 16
ROXTEC CABINET SEALING SOLUTIONS
ComSeal LW 18
CRL 20
ComSeal 22
ComShelt 25
C ComShelt 27
EzEntry 29
CF 24 32
RG M63 34
C RS T 36
CF 8/CF 32 38
CF 16 40
HD 32 42
C KFO 44
Modules and wedge for C KFO 46
KFO 47
GHM 49
Modules and wedge for KFO and GHM 51
Installation tools 52
4. 4 www.roxtec.com
A truly flexible
sealing system
Multidiameter™by Roxtec
Our innovative solution for adapta
bility simplifies design, installation and
maintenance. Our sealing modules have
removable layers enabling a perfect fit
to cables and pipes of different sizes.
Just peel off layers until the module fits.
Install today, expand tomorrow
One area efficient Roxtec seal can
replace up to 32 traditional cable
glands. The built-in spare capacity
makes it easy to open up the seal and
change or add cables, without punching
new holes or adding material, whenever
there is a need.
BENEFITS
■■ Plan for extra capacity
■■ Save design and installation
time
■■ Avoid costly surprises onsite
■■ Add cables without adding
cost
5. 5www.roxtec.com
No more cutting
off connectors
Roxtec sealing solutions allow you
to route and seal pre-terminated
cables without cutting connectors.
Roxtec seals have large openings
making them ideal for use with pre-
terminated cables. You can adjust
and trim your system at the factory
and eliminate the time-consuming
and insecure cutting and re-
attaching of connectors onsite. The
result is better connectivity and less
risk for EMI and signal loss.
BENEFITS
■■ Maintain the integrity
of the connection
■■ Long-term operational
reliability
■■ Shorter installation times
■■ Reduction of installation
costs
6. 6 www.roxtec.com
More cable, less cabinet
Roxtec seals allow multiple cables
or pipes through one opening. You
eliminate the need for punching
holes for cable glands and make
it possible to reduce the size
and cost of cabinets. The seals
can be pre-packed for quick field
installation.
FEATURES AND BENEFITS
■■ Multiple cables and pipes
per opening
■■ Enables smaller cabinets
■■ Allows work-bench assembly
■■ Adapter plates for cabinets
Maximize
space in your
cabinets.
Avoid drilling –
and the risk
of new leak
paths.
Roxtec solution Traditional gland solution
7. 7www.roxtec.com
Roxtec cable and pipe entry seals
provide protection against a wide
range of hazards. Typical examples
are gas, smoke, dust, fire, vibration
and electromagnetic interference.
Roxtec offers sealing solutions that
are certified by industry recognized
certifying authorities and have
been tested and found compliant
by recognized testing laboratories
worldwide.
Certified protection
Fewer warranty claims
By standardizing with Roxtec,
our customers have been able to
achieve safer and more reliable
installations of cables with
connectors. This reduces their
costs for repairs after delivery due
to component failure and improper
routing.
TESTED AND APPROVED
■■ IP 54, IP 66/67, IP69K
■■ Fire protection
■■ Water-tightness
■■ Vibration damping
■■ IECEx/ATEX
■■ UL/NEMA 3, 3R, 4, 4X, 12,
12K and 13
■■ EMC
■■ Pull-out resistance
8. 8 www.roxtec.com
Roxtec cable sealing
solutions for every industry
Thanks to their reliability and extreme flexibility, our
sealing solutions are used in a wide range of industries
and applications. You find Roxtec seals for cabinets
and enclosures in demanding environments on land
and at sea all over the world.
9. 9www.roxtec.com
MACHINE BUILDERS/
PANEL SHOPS ROLLING STOCK MILITARY VEHICLES
Power supply cabinet: The Roxtec CF
32 can accommodate several cables in a
small space.
Robotic routing machine control
cabinet: The compact design of the
Roxtec CF 16 maximizes free space.
High pressure wash down environments:
The Roxtec CF 16 AISI 304 maintains
high sanitary requirements.
Light railway vehicle: The fire rated
Roxtec CF 24 F1 helps ensure passenger
safety by preventing the spread of fire
into the passenger compartment.
Fire-proof and pressure resistant cable
seal.
Ambulances: The Roxtec C RS T seal for
roof-top cable entries.
Radar control cabinet: The Roxtec CF
32 is used for sealing cables to radar
systems.
Driver cab and engine room: Customized
sealing solution installed to keep tight
between the driver cab and engine room.
V-hull vehicles: The Roxtec CF 16 cable
seal is used in the walls and on the roof/
ceiling of vehicles to prevent the ingress
of water and dust.
10. 10 www.roxtec.com
Converter system: The Roxtec EzEntry™
cable entry seal protects against dust
and water.
Junction boxes and control cabinets:
The Roxtec CF 32/32 provides IP 67
and NEMA 4 protection, sealing up to 32
cables in a single small cut-out.
Control cabinets: The Roxtec CF 32 PE
for potential equalization is used for
generator and turbine cubicle marshalling.
Wind turbine: Roxtec transits for
potential equalization as well as the
Roxtec standard system for control
cabinets in the nacelle.
DCS/PLC and I/O marshalling cabinets:
Roxtec solutions reduce required cabinet
space, ensure functionality and provide
capacity for additional cables.
Instrumentation and communication:
The Roxtec CF 32 provides protection
against coal dust.
I/C cabinets: Neat and area efficient
cable entry seals suitable for safety and
non-safety applications.
Ex e terminal box: The Roxtec CF 32 Ex
frame can accommodate 32 SWA or MC
cables.
Transformers and switchgear: The
Roxtec GHM solution provides protection
to ensure operational reliability.
CONSTRUCTION
POWER
(WIND, NUCLEAR, SOLAR)
PROCESSING
AND HEAVY INDUSTRIES
11. 11www.roxtec.com
Bonding and grounding: Roxtec BG™
provides solutions for termination of
conduits, armored and metal clad cables
in control cabinets and junction boxes.
The Roxtec HD 32 is our lighter frame, a
bolted alternative that is suitable for both
indoor and outdoor applications. EMC
versions also available.
Radio room: RFI shielded EMC and
firestop solutions for radar and navigation
equipment in bulkheads.
Generators and propulsion system:
Roxtec seals are adaptable to fit cables
and pipes of different sizes.
Communication centers: The Roxtec
GHM solution seals fiber optics and
cables in floors and outer walls.
Telecom cabinet: The Roxtec RG M63
cable glands are weather, water, pest and
dust tight.
Captain’s bridge: Route wiring through
Roxtec cabinet seals and into enclosures
without compromising IP ratings.
Base station shelter: The Roxtec CRL
provides increased line capacity to maxed-
out entry port panels without modification
of the existing shelter or entry port.
Generators, thrusters and motor terminal
boxes: IP and vibration protection.
The seals allow routing of cables with
terminations. Available in EMC versions.
OFFSHORE OIL AND GAS MARINE TELECOM
12. 12 www.roxtec.com
The Roxtec BG B and BG (bonding
and grounding) product family is our
cable entry system for sealing large
quantities of metal clad or armored
cables in the least amount of
space. Use it in building structures,
cabinets and enclosures to save
design and installation time – and to
reduce weight and costs!
Save space and money
Roxtec BG B and BG solutions are
lighter and up to 70 percent more
area efficient than cable glands and
a direct replacement to glands for
terminating metal clad and armored
cable types. With a single cable
entry from Roxtec, you can seal
varying outside diameters of single
or multiple cables while ensuring
a certified bonding or grounding
termination.
More cables, less cabinet
For cabinets and electrical
enclosures, Roxtec BG B and BG
solutions allow for the size and
weight of cabinets to be greatly
Roxtec BG
™
B for
bonding and grounding
reduced. A single cut-out for a
standard Roxtec CF 32 BG B kit can
accommodate up to 32 cables, which
drastically reduces the amount of
space required when compared to
32 individual cable glands.
Replacing “pig-tails”
Flattened braids, combining large
copper masses in a flat form, are
often used to ensure earth paths for
higher frequencies. The Roxtec BG
B and BG solution has such a braid
embedded and surrounded by the
solid metal frame. This solution can
easily replace weak solutions such
as “pig-tails” – individual earthing
conductors connecting the cable
armor to the earthing bar.
FEATURES AND BENEFITS
■■ Bond and ground metal clad
and armored cables
■■ Ensure electrical safety and
protect life and assets
■■ Reduce the area required by
70% compared to cable glands
■■ Perfect for walls, floors,
cabinets and enclosures
■■ Fire rated and available for
hazardous locations (Ex)
ROXTEC BG™ B PRODUCT LINE
Roxtec BG B provides electrical safety and protection against
lightning strikes.
Roxtec BGB/BG (bonding and grounding) handles high currents
and bonds and grounds armored or shielded cables. It has high
current withstand capability for short-circuit and surge currents.
13. 13www.roxtec.com
Roxtec EMC solutions
Ensuring EMC, electromagnetic
compatibility, is a two way challenge.
You must limit the effects of EMI,
electromagnetic interference,
entering the enclosure, while
minimizing the potential for EMI
generated within the enclosure from
escaping and causing interference
with nearby electronics.
Multiple risk prevention
Roxtec EMC solutions can perform
multiple risk prevention functions at
the same time. They can combine
protection against disturbances
from technical systems with
protection against risk factors
such as fire, smoke, water, gas,
explosion and vibration. So why use
many components, labor time and
space when one Roxtec system is
enough?
Increased EMI exposure
Electromagnetic disturbances travel
either conducted along a metallic
object or propagate through air. The
conductive armor in a cable can
carry unwanted signals and cause
interference in a system far away
from the original source. It is crucial
for designers, engineers and owners
to consider the risk of EMI exposure
and to include EMC into the initial
electrical design for cabinets,
enclosures, and terminal and
junction termination boxes. Roxtec
seals support best practice EMI
protection principles by providing a
single entry and by integrating the
earth path.
Electromagnetic shielding
Roxtec also provides solutions for
cables going in or out of electro
magnetically sealed enclosures.
The seals are tested to a minimum
of 18GHz to prove the shielding
effectiveness. Transfer impedance
from cable shield to frame is also
measured up to 30MHz.
ROXTEC EMC PRODUCT
LINES
Roxtec EMC solutions pro
vide protection against EMI.
Roxtec ES provides electro
magnetic shielding. It blocks and
diverts high frequency radiated and
conducted EMI and electromagnetic
pulses, EMP.
Roxtec PE provides protection
against conducted EMI carried by
cable screens or metal pipes.
14. 14 www.roxtec.com
The Roxtec Transit Designer is
a free, web-based engineering
tool. It reduces project risks and
simplifies product selection as well
as the entire process of designing,
purchasing and installing cable and
pipe transits.
Its batch import with auto validation
feature helps designers create
and update thousands of transits
automatically and take full control of
their largest project designs. They
can also validate their complete
project by using the Roxtec CAD
symbols and the Roxtec Transit
Designer for easy incorporation of
the transits into the design.
Always available, everywhere
The Roxtec Transit Designer is
accessible online. Share your work
with project teams anywhere in the
world, and our experts are available
through the chat function.
To start using it, sign-up on
www.roxtec.com.
Roxtec Transit Designer
™
FEATURES
■■ Free web-based application
■■ Simple product selection
■■ Manufacturer-approved
outputs
■■ Improves project efficiency
■■ Batch import with auto
validation
■■ Import multiple transits to
speed up design work
SIMPLE USER INPUT
Cable/pipe schedule
or estimates
Sealing/certification
requirements
Installation preferences
Material quality selection
APPROVED OUTPUT
2D drawings in DXF
and PDF
3D STEP
Bill of material in Excel
Installation instructions
GET STARTED ON
roxtec.com
15. 15www.roxtec.com
We are here to solve your sealing
problem – even when it requires
the creation of a new customized
solution. We have an entire
Customer Service team with
designers and engineers ready to
develop tailored seals according to
your needs.
We create
customized solutions
Experience in innovation
If you need a special solution,
just inform your local Roxtec
representative about the specific
requirements. In many cases, we
have already supplied a similar
sealing solution, somewhere in the
world, allowing us to respond very
quickly to your request.
16. 16 www.roxtec.com
ComSeal LW CF 8/32 CF 16 EzEntry RG M63 ComSeal
RATINGS
IP 44 3
IP 54
IP 55 3
IP 66/67 3 3 3 3
IP 69K
UL/NEMA 3R 3
UL/NEMA 3, 12, 12K 3
UL/NEMA 4, 4X, 12, 13 3 3 3 3
TRANSIT
Single cable 3
Multiple cables 3 3 3 3 3 3
MATERIAL
Composite frame 3
Aluminum 3 3 3
Powder coated mild steel 3
Nickel-plated brass 3
Stainless steel 3 3 3
ROXTEC CABINET SEAL
SELECTION GUIDE
COMPANY NAME CATEGORY NAME FILE NUMBER
Roxtec Inc Firestop Devices XHJI.R16085
Roxtec Inc Firestop Devices Certified for Canada XHJI7.R16085
Roxtec Inc Industrial Control Panels – Component NITW2.E197106
Roxtec Inc Industrial Control Panels Certified for Canada – Component NITW8.E197106
Roxtec Inc Plastics – Component QMFZ2.E179133
Roxtec International AB Firestop Devices XHJI.R15556
Roxtec International AB Firestop Devices Certified for Canada XHJI7.R15556
Roxtec International AB Industrial Control Panels – Component NITW2.E209828
Roxtec International AB Industrial Control Panels Certified for Canada – Component NITW8.E209828
Roxtec International AB Plastics – Component QMFZ2.E185619
UL FILE NUMBERS
For more information, go to www.roxtec.com
17. 17www.roxtec.com
C RS T HD 32 GHM KFO CF 24 C KFO C ComShelt CRL
3
3 3
3 3 3 3 3
3
3 3 3 3
3 3
3 3 3 3 3 3 3
3 3 3 3
3
3
3 3 3
Available in Ex version
Available in EMC version
18. 18 www.roxtec.com
RATINGS IP: 44 UL/NEMA: 3R
The Roxtec ComSeal LW is a light-weight and area effici
ent cable and pipe sealing solution for cabinets. The
frames are made out of cast aluminum and used with
adaptable sealing modules. The product is supplied as
ready-made kits which include all necessary components.
Available in six different sizes
Attached on inside or outside of cabinet
Version available for the FL 21 cut-out
Roxtec ComSeal™
LW
ComSeal™
LW kits, integrated compression unit, aluminum
Kit
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(EM 15w40)
0+3.5-16.5 mm
0+0.138-0.650"
(EM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(EM 40 10-32)
ComSeal LW 6/3 2 1 0.322 0.710 107788
ComSeal LW 6/6 6 0.322 0.710 107789
ComSeal LW 6/12 12 0.322 0.710 107790
ComSeal LW 12/3 3 0.445 0.981 107791
ComSeal LW 12/6 4 2 0.445 0.981 107792
ComSeal LW 12/9 8 1 0.445 0.981 107793
ComSeal LW 12/12 12 0.445 0.981 108020
ComSeal LW 12/3 FL 21 3 0.488 1.076 107799
ComSeal LW 12/6 FL 21 4 2 0.488 1.076 107800
ComSeal LW 12/9 FL 21 8 1 0.488 1.076 107802
ComSeal LW 6 ComSeal LW 12 ComSeal LW 12 FL 21 ComSeal LW 16
19. 19www.roxtec.com
ComSeal™
LW kits, integrated compression unit, aluminum
ComSeal™
LW frame, technical information
Note: All dimensions are nominal values
ComSealLW 6
W
w1
H
l
h1
c Dø
ComSealLW 12
W
c
w1
H
l
h1
Dø
ComSealLW 12 FL 21
w1
c
W
h1
H
l
D
ø
ComSealLW 16
D
W
c
H
l
h1
w1
ø
Max wall thickness:
ComSeal LW 6, 12, 16: 10 mm (0.394")
ComSeal LW 12 FL 21: 7 mm (0.275")
ComSeal LW 6 ComSeal LW 12
ComSeal LW 12
FL 21
ComSeal LW 16
Pos (mm) (in) (mm) (in) (mm) (in) (mm) (in)
c 68.5 2.697 68.5 2.697 62 2.441 68.5 2.697
D 55 2.165 55 2.165 55 2.165 55 2.165
H 133 5.236 193 7.598 216 8.504 233 9.173
h1 60 2.362 120 4.724 120 4.724 160 6.299
l 121 4.764 90.5 3.583 193 7.598 73.5 2.913
w1 40 1.575 40 1.575 40 1.575 40 1.575
W 80.5 3.169 80.5 3.169 88 3.465 80.5 3.169
ø 5.5 0.217 5.5 0.217 8.5 0.335 5.5 0.217
Kit
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(EM 15w40)
0+3.5-16.5 mm
0+0.138-0.650"
(EM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(EM 40 10-32)
ComSeal LW 12/12 FL 21 12 0.488 1.076 108018
ComSeal LW 16/4 4 0.536 1.180 107794
ComSeal LW 16/7 4 3 0.536 1.180 107795
ComSeal LW 16/10 8 2 0.536 1.180 107796
ComSeal LW 16/16 16 0.536 1.180 107797
Modules and frames can be ordered separately.
For ComSeal LW 12 FL 21: If the wall is
thinner than 2 mm, a Roxtec ComSeal
12 counter flange 2CV0001020219 is
recommended (not supplied in the kit)
20. 20 www.roxtec.com
CRL 5"/1 CRL 5"/4 CRL 5"/5 CRL 5"/9
RATINGS IP: 54
Roxtec CRL is a round expansion frame for 4" and
5" holes. Its square packing space houses modules
and services, such as cables, pipes and fiber optics.
Compression is integrated in the frame.
Attachment by expansion
Designed to be installed on a shelter port hatch plate
(not manufactured by Roxtec)
Roxtec CRL seal
CRL kit, CRL 4": Polyamide, PA 6.6 25% GF, CRL 5": Primed mild steel
CRL 4"/1 CRL 4"/4 CRL 4"/5 CRL 4"/9
Kit
Number of
cables/pipes
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+4-16.5 mm
0+0.157-0.650"
(CM22w66)
0+10-29 mm
0+0.394-1.142"
(CM33w66)
0+24-54 mm
0+0.945-2.126"
(CM66)
CRL 4"/1 1 1 0.6 1.323 102997
CRL 4"/4 4 4 0.6 1.323 102993
CRL 4"/5 5 3 2 0.6 1.323 102994
CRL 4"/9 9 9 0.6 1.323 102995
CRL 5"/1 1 1 0.95 2.094 CRL0005010012
CRL 5"/4 4 4 0.95 2.094 CRL0005040012
CRL 5"/5 5 3 2 0.95 2.094 CRL0005050012
CRL 5"/9 9 9 0.95 2.094 CRL0005090012
Modules and frames can be ordered separately.
21. 21www.roxtec.com
CRL seal, technical information
Note: All dimensions are nominal values
c
e
g
f
sw
CRL 4" CRL 5"
Pos (mm) (in) (mm) (in)
c 74.0 2.913 74.0 2.913
e 59.0 2.323 33.0 1.299
f 98.0 3.858 123.0 4.843
g 115.0 4.528 140.0 5.514
sw 10 0.394 9.525 0.375
22. 22 www.roxtec.com
RATINGS IP: 55 UL/NEMA: 3, 12, 12K
The Roxtec ComSeal is a light-weight and area efficient
cable sealing solution for cabinets. The frames are avail
able in cast aluminum and cast acid-proof stainless steel,
AISI 316, and used with adaptable sealing modules. The
product is supplied as ready-made kits which include all
necessary components.
Available in six different sizes
Attached on inside or outside of cabinet
Roxtec ComSeal™
ComSeal™
kits, integrated compression unit, aluminum
ComSeal 10 ComSeal 12 ComSeal 16ComSeal 15 ComSeal 30 ComSeal 32
Kit
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-16.5 mm
0+0.138-0.650"
(CM 20W40)
0+9.5-32.5 mm
0+0.374-1.280"
(CM 40 10-32)
0+28-43 mm
0+1.102-1.693"
(CM 50)
ComSeal 10/4 2 2 0.515 1.13 105299
ComSeal 10/7 6 1 0.515 1.13 105301
ComSeal 10/10 10 0.515 1.13 105302
ComSeal 12/3 3 0.61 1.34 105303
ComSeal 12/6 4 2 0.61 1.34 105305
ComSeal 12/9 8 1 0.61 1.34 105306
ComSeal 12/12 12 0.61 1.34 105307
ComSeal 15/3 3 0.91 2.0 105308
ComSeal 16/4 4 0.666 1.47 105310
ComSeal 16/7 4 3 0.666 1.47 105312
24. 24 www.roxtec.com
ComSeal™
frame, technical information
Note: All dimensions are nominal values
ComSeal 10
ComSeal 16 ComSeal 32ComSeal 30
ComSeal 12 ComSeal 15
H
W
II
c
h1
w1
D
ø
H
W
II
ch1
w1
D
ø
H
W
II
c
h1
w1
D
ø
H
W
II
c
h1
w1
D
ø
I
H
W
I
c
h1
w1
D
ø
I
c
H
W
II
c
h1
w1
D
ø
I
c
Max wall thickness:
ComSeal 10, 15, 16, 30, 32: 10 mm (0.394")
ComSeal 12: 7 mm (0.275")
Roxtec ComSeal 12 fits the FL 21 knock-out
ComSeal 10 ComSeal 12 ComSeal 15 ComSeal 16 ComSeal 30 ComSeal 32
Pos (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in)
c 68.5 2.697 62 2.441 78.5 3.091 68.5 2.697 71.5 2.815 61.5 2.421
D 33 1.299 33 1.299 33 1.299 33 1.299 33 1.299 33 1.299
H 173 6.811 216 8.504 223 8.780 233 9.173 231 9.094 241 9.488
h1 100 3.937 120 4.724 150 5.906 160 6.299 150 5.906 160 6.299
l 80.5 3.169 193 7.598 105.5 4.154 73.7 2.902 109.5 4.311 76.33 3.005
w1 40 1.575 40 1.575 50 1.969 40 1.575 50 1.969 40 1.575
W 80.5 3.169 88 3.465 90.5 3.563 80.5 3.169 155 6.102 135 5.315
ø 5.5 0.217 8.5 0.335 5.5 0.217 5.5 0.217 5.5 0.217 5.5 0.217
25. 25www.roxtec.com
RATINGS IP: 55
The Roxtec ComShelt is a sealing solution for cables and
pipes of different sizes. The light-weight composite frame
with integrated compression unit is designed for use in
telecom shelters and cabinets. The product is supplied as
ready-made kits which include all necessary components.
Available in two different sizes
Attached by bolting or riveting
Roxtec ComShelt™
ComShelt™
kits, integrated compression unit, composite PA 6.6 33% GF
Kit
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-16.5 mm
(RM 20w40)
0+9.5-32.5 mm
(RM 40 10-32)
0+24-54 mm
(RM 60 24-54)
ComShelt L/6 6 3.9 8.59 CSL0000000006
ComShelt L/18 6 12 3.9 8.59 CSL0000000018
ComShelt S/12 6 6 2.8 6.17 CSS0000000012
ComShelt S/30 30 2.8 6.17 CSS0000000030
ComShelt S ComShelt L
Modules and frames can be ordered separately.
26. 26 www.roxtec.com
ComShelt™
, technical information
Note: All dimensions are nominal values
ComShelt L ComShelt S
H
W
t
d2
d1
t
d2
d1
H
W
h1
w1
h1
w1
ComShelt L ComShelt S
Pos (mm) (in) (mm) (in)
H 422 16.614 342 13.465
W 305 12.008 305 12.008
h1 180 7.087 100 3.937
w1 120 4.724 120 4.724
t 7 0.276 7 0.276
d1 20 0.787 20 0.787
d2 70 2.756 70 2.756
27. 27www.roxtec.com
RATINGS IP: 55
The Roxtec C ComShelt is a sealing solution for cables
and pipes of different sizes. The light-weight composite
frame with integrated compression unit is designed for
use in telecom shelters and cabinets. The product is
supplied as ready-made kits which include all necessary
components. It is available with an additional cover plate
for closing a part of the opening until further installation is
required.
Attached by bolting or riveting
Roxtec C ComShelt™
C ComShelt™
kits, integrated compression unit, composite PA 6.6 33% GF
Kit
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-16.5 mm
(CM 20w40)
0+9.5-32.5 mm
(CM 40 10-32)
C ComShelt/18 6 12 2.1 4.63 102716
C ComShelt/12 with cover plate 6 6 2.1 4.63 104660
C ComShelt expansion module kit 6 0.5 1.10 109078
C ComShelt C ComShelt with cover plate C ComShelt expansion module kit
Modules and frames can be ordered separately.
28. 28 www.roxtec.com
C ComShelt™
, technical information
Note: All dimensions are nominal values
Pos (mm) (in)
H 358 14.173
W 255 10.039
t 8 0.315
h1 190 7.480
w1 120 4.724
d1 18 0.701
d2 49 1.929
H
W
t
d2
h1
d1
w1
29. 29www.roxtec.com
The Roxtec EzEntry simplifies cable sealing in cabinets and
enclosures. The single-side seal consists of a composite
frame and adaptable modules. The product is supplied as
ready-made kits which include all necessary components.
Available in sizes from 4 to 32 cables
Integrated compression unit
Allows pre-terminated cables
Versions available for the FL 21 knock-out and multipin
24 connector knock-out
Available with stainless steel fasteners upon request to
meet requirements in aggressive corrosive environments
Roxtec EzEntry™
EzEntry™
kit, integrated compression unit, PA 66 25% GF
RATINGS EzEntry 4 mini: IP 55, UL/NEMA 12, 13 EzEntry 4, 10, 16, 24, 32: IP 66/67, UL/NEMA 4, 4x, 12, 13
EzEntry 4 EzEntry 10EzEntry 4 mini EzEntry 16 EzEntry 24 EzEntry 32
Kit
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(GM 13.3w40)
0+3.5-16.5 mm
0+0.138-0.650"
(GM 20w40)
0+3.5-16.5 mm
0+0.138-0.650"
(EM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(EM 40 10-32)
0+3.5-16.5 mm
0+0.138-0.650"
(CM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(CM 40 10-32)
EzEntry 4 mini/4 4 0.10 0.22 EZ00000000440
EzEntry 4 mini/9 9 0.10 0.22 EZ00000000490
EzEntry 4/4 4 0.13 0.29 EZ00000000044
EzEntry 10/4 2 2 0.30 0.65 EZ00000001004
EzEntry 10/7 6 1 0.30 0.65 EZ00000001007
EzEntry 10/10 10 0.30 0.65 EZ00000001010
30. 30 www.roxtec.com
EzEntry™
kit, integrated compression unit, PA 66 25% GF
Kit
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(GM 13.3w40)
0+3.5-16.5 mm
0+0.138-0.650"
(GM 20w40)
0+3.5-16.5 mm
0+0.138-0.650"
(EM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(EM 40 10-32)
0+3.5-16.5 mm
0+0.138-0.650"
(CM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(CM 40 10-32)
EzEntry 16/4 4 0.39 0.86 EZ00000001604
EzEntry 16/10 8 2 0.39 0.86 EZ00000001610
EzEntry 16/16 16 0.39 0.86 EZ00000001616
EzEntry 24/6 6 0.80 1.77 EZ00000002406
EzEntry 24/15 12 3 0.80 1.77 EZ00000002415
EzEntry 24/24 24 0.80 1.77 EZ00000002424
EzEntry 32/8 8 1.03 2.27 EZ00000003208
EzEntry 32/20 16 4 1.03 2.27 EZ00000003220
EzEntry 32/32 32 1.03 2.27 EZ00000003232
EzEntry™
, technical information
Note: All dimensions are nominal values
EzEntry 4 mini EzEntry 4 EzEntry 10
W
w1
c
h1
H
l
D
W
w1
c
h1
H
l
D
W
w1
c
h1
H
l
D
Modules and frames can be ordered separately.
31. 31www.roxtec.com
EzEntry™
, technical information
Note: All dimensions are nominal values
EzEntry 16 EzEntry 24 EzEntry 32
W
w1
c
h1
H
l
D
W
w1
w1
c
h1h1
H
ll
D
W
w1
w1
c
h1h1
H
lll
D
EzEntry 4 mini EzEntry 4 EzEntry 10 EzEntry 16 EzEntry 24 EzEntry 32
Pos (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in) (mm) (in)
c 53 2.087 53 2.087 32 1.260 62 2.441 62 2.441 62 2.441
D 24 0.945 31 1.220 31 1.220 34 1.339 41 1.614 41 1.614
H 76 2.992 97 3.819 168 6.614 228 8.976 325 12.795 405 15.945
h1 40 1.575 40 1.575 100 3.937 160 6.299 120 4.724 160 6.299
l 53 2.087 53 2.087 130 5.118 193 7.598 123.5 4.862 109 4.291
w1 40 1.575 40 1.575 40 1.575 40 1.575 40 1.575 40 1.575
W 76 2.992 70 2.756 70 2.756 90 3.543 90 3.543 90 3.543
Max wall thickness (with nuts*):
EzEntry 4 mini: 3 mm (0.118")
EzEntry 16: 3.5 mm (0.138")
EzEntry 4, 10, 24, 32: 8 mm (0.315")
*The fasteners in the kit: self-tapping screws, washers and nuts
32. 32 www.roxtec.com
RATINGS IP: 66/67 UL/NEMA: 4, 4X, 12, 13
The Roxtec CF 24 is a bolted together frame made
from aluminum. Compression is integrated in the frame.
The frame is easily installed around existing cables. The
product is supplied as ready-made kits which include all
necessary components.
Attachment by bolting
Openable to simplify retrofit
Roxtec CF 24 frame
CF 24 kit, anodized aluminum
CF 24/8 CF 24/12 CF 24/28
Kit
Number of
cables/pipes
Diameter range and number of cables/pipes
Weight
Art. No(kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(CM 15w40)
0+3.5-16.5 mm
0+0.138-0.650"
(CM 20W40)
0+10.0-25.0 mm
0+0.394-0.984"
(CM 30w40)
0+9.5-32.5 mm
0+0.374-1.280"
(CM 40 10-32)
CF 24/8 8 8 1.5 3.307 CF00000240035
CF 24/12 12 8 4 1.5 3.307 CF00000241235
CF 24/28 28 12 16 1.5 3.307 CF00000242835
Modules and frames can be ordered separately.
33. 33www.roxtec.com
CF 24, technical information
W
w1
r
e
D
h1
H
e
Max wall thickness: 10 mm (0.394")
If the wall is thinner than 2 mm, a Roxtec CF
24 counter frame 2EPB001024012 is recom
mended (not supplied in the kit)
Note: All dimensions are nominal values
Pos (mm) (in)
e 20 0.787
H 100 3.397
h1 60 2.362
W 209 8.228
w1 160 6.299
r M6 M6
D 30 1.181
34. 34 www.roxtec.com
RATINGS IP: 67 UL/NEMA: 4, 4X,12,13
The Roxtec RG M63 entry seal is a cable gland type of
seal with adaptable sealing modules at the center. The
product is supplied as ready-made kits which include all
necessary components.
Attachment by counter ring nut
For one to nine cables/pipes
Allows use of pre-terminated cables
Recommended knockout punch: Greenlee hole punch
(size 2.52”/ISO 63)
Roxtec RG M63 seal
RG M63 kit, nickel-plated brass
Kit
Number of
cables/pipes
Diameter range and number of cables/pipes
External dimensions ØxD Weight
Art. No(mm) (in) (kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(GM 13,3w40)
0+3.5-16.5 mm
0+0.138-0.650"
(GM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(GM 40 10-32)
RG M63/1 1 1 74 x 51 2.913 x 2.008 0.5 1.213 RG00063010046
RG M63/4 4 4 74 x 51 2.913 x 2.008 0.5 1.213 RG00063040046
RG M63/9 9 9 74 x 51 2.913 x 2.008 0.5 1.213 RG00063090046
RG M63/1 RG M63/4 RG M63/9
Modules and seals can be ordered separately.
Also available in
stainless steel
Installation tools
page 52
35. 35www.roxtec.com
RG M63 kit, technical information
Dh
g
c
c
e
f
Ø
Pos (mm) (in)
c 40 1.575
e SW 64 SW 2.520
f SW 68 SW 2.677
g 10 0.394
h M63x1.5 M63x1.5
D 51 2.008
Ø 74 2.913
Note: All dimensions are nominal values
Max wall thickness: 4 mm (0.157")
36. 36 www.roxtec.com
RATINGS IP: 66/67, 69K UL /NEMA: 4, 4X, 12, 13
The Roxtec C RS T entry seal is a small-sized solution
for cabinets and equipment. The product is supplied as
ready-made kits which include all necessary components.
Attachment by counter ring nut
For one cable or pipe
Allows use of pre-terminated cables
Roxtec C RS T seal
C RS T kit, nickel-plated brass and acid-proof stainless steel fittings
Kit
Aperture dimension Ø For cable/pipe Ø
External dimensions sleeve
ØxD
Weight
sleeve
Art. No(mm) (in) (mm) (in) (mm) (in) (kg) (lb)
C RS T 25 33 1.300 0+3.6-12.0 0+0.142-0.472 39 x 20 1.535 x 0.787 0.1 0.220 CRST010025046
C RS T 31 41 1.614 0+4.0-17.0 0+0.157-0.669 50 x 20 1.969 x 0.787 0.2 0.331 CRST010031046
C RS T 43 51 2.008 0+4.0-23.0 0+0.157-0.906 65 x 40 2.559 x 1.575 0.4 0.882 CRST010043046
C RS T 50 64 2.520 0+8.0-30.0 0+0.315-1.181 78 x 40 3.071 x 1.575 0.7 1.433 CRST010050046
C RS T 25 C RS T 31 C RS T 43 C RS T 50
Also available in
stainless steel
37. 37www.roxtec.com
C RS T kit, technical information
Note: All dimensions are nominal values
c
A
A
Ø
f
e
h
A-A
g
D
C RS T 25 C RS T 31 C RS T 43 C RS T 50
Pos (mm) (in) (mm) (in) (mm) (in) (mm) (in)
c 36 1.417 46 1.811 60 2.362 70 2.756
e M 32 x 1.5 M 32 x 1.5 M40x1.5 M40x1.5 M50x1.5 M50x1.5 M63x1.5 M63x1.5
f 4 0.157 5 0.197 5 0.197 6 0.236
g 16 0.630 15 0.591 35 1.378 34 1.339
h 25 0.984 31 1.220 43 1.693 50 1.969
D 20 0.787 20 0.787 40 1.575 40 1.575
Ø 39 1.535 50 1.969 65 2.559 78 3.071
Wall
thickness
1-10 0.039-0.394 1-8 0.039-0.315 1-28 0.039-1.102 1-26 0.039-1.024
38. 38 www.roxtec.com
The Roxtec CF 8 and CF 32 entry seals are made from
cast aluminum. The compression unit is integrated in the
frame. The product is supplied as ready-made kits which
include all necessary components.
Attachment by bolting
Roxtec CF 8/
CF 32 frames
Kit
Diameter range and number of cables/pipes
External dimensions HxW Weight
Art. No(mm) (in) (kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(CM 15W40)
0+3.5-16.5 mm
0+0.138-0.650"
(CM 20w40)
0+10.0-25.0 mm
0+0.394-0.984"
(CM 30w40)
0+9.5-32.5 mm
0+0.374-1.280"
(CM 40 10-32)
CF 8/5 4 1 140 x 75 5.512 x 2.952 0.7 1.543 CKT8000000005
CF 8/8 8 140 x 75 5.512 x 2.952 0.7 1.543 CKT8000000008
CF 8/9 6 2 1 140 x 75 5.512 x 2.952 0.7 1.543 CKT0000000009
CF 32/20 16 4 230 x 130 9.055 x 5.118 2.0 4.409 CKT3200000020
CF 32/32 32 230 x 130 9.055 x 5.118 2.0 4.409 CKT3200000032
CF 32/41 24 16 1 230 x 130 9.055 x 5.118 2.0 4.409 CKT3200000041
CF 8/CF 32 kits, integrated compression unit, aluminum
RATINGS IP: 66/67 UL/NEMA: 4, 4X, 12, 13
CF 32/20 CF 32/32 CF 32/41CF 8/8 CF 8/9CF 8/5
Modules and frames can be ordered separately.
39. 39www.roxtec.com
CF 8/CF 32 frames, technical information
Note: All dimensions are nominal values
CF 8
W
H
ll
w1t1g
c
f
e
h1
r
t2
W
H
w1 w1
t2
r
g
f
e
m
n n
h2
kkk
t1
Pos (mm) (in)
c 53 2.087
e 59 2.323
f 38 1.496
g 12 0.472
l 60 2.362
Pos (mm) (in)
k 70 2.756
m 48 1.890
n 51 2.008
r SW 4 SW 0.157
t1 4 0.157
Pos (mm) (in)
t2
Wall thickness
Max 4
Max 0.157
h1 80 3.150
h2 160 6.299
w1 40 1.575
CF 32
40. 40 www.roxtec.com
Kit
Number of
cables/pipes
Diameter range and number of cables/pipes
External dimensions HxW Weight
Art. No(mm) (in) (kg) (lb)
0+3.5-10.5 mm
0+0.138-0.413"
(CM 15W40)
0+3.5-16.5 mm
0+0.138-0.650"
(CM 20w40)
0+9.5-32.5 mm
0+0.374-1.280"
(CM 40 10-32)
CF 16/4 4 4 234 x 93 9.213 x 3.661 1.7 3.748 CKT0008020004
CF 16/10 10 8 2 234 x 93 9.213 x 3.661 1.7 3.748 CKT0008020010
CF 16/16 16 16 234 x 93 9.213 x 3.661 1.7 3.748 CKT0008020016
CF 16/19 19 12 6 1 234 x 93 9.213 x 3.661 1.7 3.748 CKT0008020119
CF 16 kit, powder coated mild steel
RATINGS IP: 66/67 UL/NEMA: 4, 4X, 12, 13
Modules and frames can be ordered separately.
The Roxtec CF 16 is a low-profile metal frame.
Compression is integrated in the frame. Adapter plates
are available for standardized openings in cabinets. The
product is supplied as ready-made kits which include all
necessary components.
Attachment by bolting
Available in openable version for easy retrofit and
installation around existing cables and pipes
Roxtec CF 16 frame
CF 16/4 CF 16/10 CF 16/16 CF 16/19
Also available in
stainless steel
41. 41www.roxtec.com
CF 16 frame, technical information
Note: All dimensions are nominal values
W
w1
A
A
A-A
t1
ec
f
h1
g
H
r
Pos (mm) (in)
c 17 0.669
e 20 0.787
f 42 1.654
g 175 6.890
h1 160 6.299
w1 40 1.575
t1 Wall thickness Max 4 Max 0.157
r SW TX25 SW TX 25
42. 42 www.roxtec.com
The Roxtec HD 32 (High Density) is a corrosion resistant
cable entry seal for sealing and terminating up to 32
cables in one single cut-out in junction and terminal
boxes. The seal is designed to withstand the harshest of
environments and it is approved for use in hazardous and
industrial applications as a direct replacement to cable
glands. The product is supplied as ready-made kits which
include all necessary components.
316L stainless steel material
Extremely area efficient
Adapts to cables of different sizes
Roxtec HD 32
RATINGS IP: 66/67 UL /NEMA: 4, 4X, 12, 13
HD 32 kit, integrated compression unit, acid-proof stainless steel
HD 32/8 HD 32/20 HD 32/32 HD 32/41
Kit
Number of
cables/pipes
Diameter range and number of cables/pipes
External dimensions HxW Weight
Art. No(mm) (in) (kg) (lb)
0+9.5-31.5 mm
0+0.37-1.24"
(HD 40)
0+3.5-15.5 mm
0+0.0.14-0.61"
(HD 20w40)
0+3.5-9.5 mm
0+0.0.14-0.37"
(HD 15w40)
HD 32/8 8 8 236 x 130 9.3 x 5.1 3 6.8 112276
HD 32/20 20 4 16 236 x 130 9.3 x 5.1 3 6.8 112278
HD 32/32 32 32 236 x 130 9.3 x 5.1 3 6.8 112279
HD 32/41 41 1 16 24 236 x 130 9.3 x 5.1 3 6.8 112280
Modules and frames can be ordered separately.
43. 43www.roxtec.com
HD 32 frame, technical information
Note: All dimensions are nominal values
W
H
e
f
t2
t1
w1 w1
h1
r
c c
ggg
Pos (mm) (in)
c 51.5 2.02
e 60 1.36
f 45 1.77
g 69.7 2.75
h1 160 6.3
w1 40 1.57
t1 4 0.15
t2 Wall thickness Max 4 Max 0.157
r SW10 0.4
44. 44 www.roxtec.com
The Roxtec C KFO is a light-weight composite frame
in size 6x1. The frame is openable for easy installation
around existing cables. The product is supplied as ready-
made kits which include all necessary components.
Attachment by bolting
Available with or without flange
Available with stainless steel fasteners upon request
Roxtec C KFO frame
C KFO frame, PA 6.6, 30% GF - flange, PP
RATINGS IP: 55
Frame
For No.
openings
Packing space
(mm)
External dimensions HxW Weight
Art. No(mm) (in) (kg) (lb)
C KFO 6x1 1 180 x 120 260 x 159 10.236 x 6.260 0.6 1.323 CKF0000060059
C KFO 6x1 with flange 1 180 x 120 420 x 319 16.535 x 12.559 1.2 2.646 CKF1000060059
C KFO Counter frame* 1 180 x 120 262 x 161 10.315 x 6.338 0.4 0.882 KFC0000100011
C KFO 6x1 C KFO 6x1 with flange C KFO Counter frame
* The C KFO Counter frame is recommended if the wall is 1.5 mm (0.059’’) or thinner.
Modules and frames can be ordered separately.
Parts needed for a complete solution
page 46
45. 45www.roxtec.com
C KFO frame, technical information
Note: All dimensions are nominal values
Pos (mm) (in)
c 241 9.488
e 70 2.756
f Ø 8.2 (8x) Ø 0.323 (8x)
g 140 5.512
h1 222 8.740
w1 120 4.724
t1 gasket 2 0.079
D 26 1.024
C KFO 6x1
H
w1
c
h1
ee
g
W
D
f t1
Pos (mm) (in)
c 20 0.787
e 95 (4x) 3.740 (4x)
f 96 (2x) 3.780 (2x)
g Ø 10 (23x) Ø 0.394 (23x)
l 116 4.567
m 161 6.339
n 228 8.976
o 299 11.772
t1 8 0.315
p 87 3.425
D 34 1.339
k
H
f g
c
l
m
n
o
W
t1
ce
D
p
Max wall thickness: 6 mm (0.236")
C KFO 6x1 with flange
46. 46 www.roxtec.com
CM 20CM 15w40* CM 20w40* CM 30 CM 30w40 CM 40 10-32CM 40
Roxtec CM modules
Module
Number of
cables/pipes
For cable/pipe Ø External dimensions
HxW (mm)
(D=30 mm)
Weight (max)
Art. No(mm) (in) (kg) (lb)
CM 15w40* 3 0+ 3.5-10.5 0+ 0.138-0.413 15 x 40 0.03 0.055 C000115401000
CM 20 1 0+ 4.0-14.5 0+ 0.157-0.571 20 x 20 0.02 0.044 C000100201000
CM 20w40* 2 0+ 3.5-16.5 0+ 0.138-0.650 20 x 40 0.04 0.077 C000120401000
CM 30 1 0+ 10.0-25.0 0+ 0.394-0.984 30 x 30 0.04 0.088 C000100301000
CM 30w40 1 0+ 10.0-25.0 0+ 0.394-0.984 30 x 40 0.06 0.121 C000130401000
CM 40 1 0+ 21.5-34.5 0+ 0.846-1.358 40 x 40 0.07 0.135 5CM0000008983
CM 40 10-32 1 0+ 9.5-32.5 0+ 0.374-1.280 40 x 40 0.07 0.135 C000140101000
Wedge
External dimensions W Weight
Art. No(mm) (in) (kg) (lb)
C Wedge kit galv 120 4.724 0.65 1.443 AWK2001201018
C Wedge kit/parts, galvanized
C Wedge kit galv
* Whenever possible we recommend choosing twin or triplet
modules like CM20w40 or CM15w40. Benefits are higher
area efficiency per frame opening, quicker installation and
improved cost-effectiveness.
The wedge kit includes one Roxtec
Wedge 120, five stayplates, one lubri
cant and installation instructions.
47. 47www.roxtec.com
The Roxtec KFO is a light-weight composite frame in size
6x1. The frame is openable for easy installation around
existing cables and pipes. Upon request, the product can
be supplied as ready-made kits including all necessary
components.
Attachment by bolting
Available with or without flange
Available with stainless steel fasteners upon request to
meet requirements in aggressive corrosive environments
Roxtec KFO frame
KFO frame, PA 6.6, 30% GF - flange, PP
KFO 6x1 KFO 6x1 with flange
RATINGS IP: 66/67
Frame
For No.
openings
Packing space
(mm)
External dimensions HxW Weight
Art. No(mm) (in) (kg) (lb)
KFO 6x1 1 180 x 120 260 x 159 10.236 x 6.260 1.0 2.094 KFO0000060059
KFO 6x1 with flange 1 180 x 120 420 x 319 16.535 x 12.559 1.6 3.417 KFO1000060059
Parts needed for a complete solution
page 51
48. 48 www.roxtec.com
KFO frame, technical information
Note: All dimensions are nominal values
Pos (mm) (in)
l 95 (4x) 3.740 (4x)
m 96 (3x) 3.780 (3x)
n Ø 10 (23x) Ø 0.394 (23x)
o 116 4.567
p 160 6.299
q 220 8.661
r 299 11.772
s 20 0.787
t2 8 0.315
D 60 2.362
KFO 6x1 with flange
s
H
m n
s
o
p
q
r
W
t2
sl
D
KFO 6x1
H
e
j
k
cc
f
W
g g
D
t1d
Pos (mm) (in)
c 70 2.756
d Ø 8.2 (8x) Ø 0.323 (8x)
e 120 4.724
f 140 5.512
g 26 1.024
j 241 9.488
k 222 8.740
t1 Wall thickness 5-8 0.197-0.315
D 57-60 2.244-2.362
49. 49www.roxtec.com
The Roxtec GHM frame is a flanged metal frame designed
for installation through bolting. The frame is sealed onto
the structure by use of TSL sealing strip and used with
adaptable sealing modules. Upon request, the product
can be supplied as ready-made kits including all necessary
components.
Attachment by bolting
Drilled according to standardized hole pattern
Roxtec GHM frame
GHM frame, acid-proof stainless steel
RATINGS IP: 66/67 UL/NEMA: 4, 4X, 12, 13
Frame
Frame
openings
Packing space
(mm)
External dimensions HxW (D=60mm) Weight
Art. No(mm) (in) (kg) (lb)
GHM 2x1 AISI316 INCL TSL 15x6 1 60 x 120 233 x 253 9.173 x 9.961 3.4 7.562 5GHM000003379
GHM 2x2 AISI316 INCL TSL 15x6 2 60 x 120 233 x 383 9.173 x 15.079 5.4 11.905 151674
GHM 2x3 AISI316 INCL TSL 15x6 3 60 x 120 233 x 514 9.173 x 20.236 7.4 16.218 109390
GHM 4x1 AISI316 INCL TSL 15x6 1 120 x 120 292 x 253 11.496 x 9.961 4.1 9.039 5GHM000003380
GHM 4x2 AISI316 INCL TSL 15x6 2 120 x 120 292 x 383 11.496 x 15.079 6.3 13.977 110624
GHM 4x3 AISI316 INCL TSL 15x6 3 120 x 120 292 x 514 11.496 x 20.236 8.6 18.938 GHM4000000321
GHM 6x1 AISI316 INCL TSL 15x6 1 180 x 120 350 x 253 13.780 x 13.961 4.8 10.516 150388
GHM 6x2 AISI316 INCL TSL 15x6 2 180 x 120 350 x 383 13.780 x 15.079 7.3 16.072 107786
GHM 6x3 AISI316 INCL TSL 15x6 3 180 x 120 350 x 514 13.780 x 20.236 9.8 21.627 110623
GHM 6x1 AISI 316
Also available in galvanized mild steel.
For shielded EMC applications a conduc
tive gasket is required.
For information about other frame combi
nations, please contact your local Roxtec
supplier or e-mail: info@roxtec.com
Parts needed for a complete solution
page 51
50. 50 www.roxtec.com
GHM frames, technical information
Note: All dimensions are nominal values
Z = Frame size
N = Number of horizontal openings
Hole pattern
c
Y(Sx)
c
X (Tx)
e
GHM ZxN
H
h2
A
A
t2
w2
W A-A
f2
f2 D
t1
t4
A-A
D
t1
t4
H
h2
w2
W
f2
f2
A
A
t1 t1
t1
t1
GHM Zx1
Pos (mm) (in)
h2 H - 120 H - 4.724
w2 W - 120 W - 4.724
D 60 2.362
f2 60 2.362
t1 6 0.263
t2 10 0.394
t3 12 0.394
t4 3 0.118
e 10 0.394
c 35 1.378
X (Tx) Y (Sx)
X (mm) X (in) T Y (mm) Y (in) S
GHM 2x1 101.3 3.988 2 91.5 3.602 2
GHM 2x2 111 4.370 3 91.5 3.602 2
GHM 2x3 92.7 3.650 5 91.5 3.602 2
GHM 4x1 101.3 3.988 2 80.5 3.169 3
GHM 4x2 111 4.370 3 80.5 3.169 3
GHM 4x3 92.7 3.650 5 80.5 3.169 3
GHM 6x1 101.3 3.988 2 75 2.953 4
GHM 6x2 111 4.370 3 75 2.953 4
GHM 6x3 92.7 3.650 5 75 2.953 4
52. 52 www.roxtec.com
Stayplate clamps
horizontal inst
Stayplate clip RG M63 tools RG M63 tool 3/8 grip
Installation/disassembly tools
Pre-compression tool,
small
Pre-compression tool,
large
Pre-compression
eccentric tool, small
Pre-compression
eccentric tool, large
Pre-compression
eccentric tool, compact
Handgrip
pre-compression tool
Pre-compression
wedge 120
Pre-compression
wedge 60/40
Module Adaption Indicator
Tool For use with Art. No
Pre-compression tool, small KFO, GHM 5ICT000001269
Pre-compression tool, large KFO, GHM ICT0001000000
Pre-compression eccentric tool, small KFO, GHM ICT0001000302
Pre-compression eccentric tool, large KFO, GHM ICT0001000301
Pre-compression eccentric tool, compact ComSeal LW, ComSeal, EzEntry, CF 8/32, CF 16, HD 32, C KFO ICT0001000316
Handgrip pre-compression tool KFO, GHM ICT0001000401
Pre-compression wedge 60/40 ComSeal LW, ComSeal, EzEntry, CF 8/32, CF 16, HD 32 5ICT000003691
Pre-compression wedge 120 KFO, GHM ICT0001000500
Stayplate clamps horizontal inst, 2 pcs KFO, GHM ICT0001000100
Stayplate clip KFO, GHM ICT0001000200
RG M63 tools RG M63 5IRG000001545
RG M63 tool 3/8 grip RG M63 ICT2010000001
Module Adaption Indicator Measuring tool for easier selection of sealing module IQR2009000101
53. Local presence worldwide
We are a global company with a
strong local presence ready to help
you throughout your national or
international projects. We support our
customers in more than 80 markets
and ensure product availability from
local stocks – through 25 subsidiaries
and a growing network of distributors
and agents.
Find your local Roxtec representative
on www.roxtec.com.
Visit www.roxtec.com
On our website, you can click yourself through an entire
world sealed by Roxtec. You can also see our movies,
read our brochures on different application areas and find
more information on specific products and solutions.
54. ALL RIGHTS RESERVED
We reserve the right to make changes to the product and technical information without further notice. Any errors in print or entry are no claims for indemnity.
The content of this publication is the property of Roxtec International AB and is protected by copyright.
DISCLAIMER
”The Roxtec cable entry sealing system (”the Roxtec system”) is a modular-based system of sealing products consisting of different components. Each and
every one of the components is necessary for the best performance of the Roxtec system. The Roxtec system has been certified to resist a number of different
hazards. Any such certification, and the ability of the Roxtec system to resist such hazards, is dependent on all components that are installed as a part of the
Roxtec system. Thus, the certification is not valid and does not apply unless all components installed as part of the Roxtec system are manufactured by or under
license from Roxtec (“authorized manufacturer”). Roxtec gives no performance guarantee with respect to the Roxtec system, unless (I) all components installed
as part of the Roxtec system are manufactured by an authorized manufacturer and (II) the purchaser is in compliance with (a), and (b), below.
(a) During storage, the Roxtec system or part thereof, shall be kept indoors in its original packaging at room temperature.
(b) Installation shall be carried out in accordance with Roxtec installation instructions in effect from time to time.
The product information provided by Roxtec does not release the purchaser of the Roxtec system, or part thereof, from the obligation to independently deter
mine the suitability of the products for the intended process, installation and/or use. Roxtec gives no guarantee for the Roxtec system or any part thereof and
assumes no liability for any loss or damage whatsoever, whether direct, indirect, consequential, loss of profit or otherwise, occurred or caused by the Roxtec
systems or installations containing components not manufactured by an authorized manufacturer and/or occurred or caused by the use of the Roxtec system in
a manner or for an application other than for which the Roxtec system was designed or intended.
Roxtec expressly excludes any implied warranties of merchantability and fitness for a particular purpose and all other express or implied representations and
warranties provided by statute or common law. User determines suitability of the Roxtec system for intended use and assumes all risk and liability in connection
therewith. In no event shall Roxtec be liable for indirect, consequential, punitive, special, exemplary or incidental damages or losses.”