The document summarizes an extra low profile remote-controlled dozer called the MVD XLP. It was designed for uses like underground mining, construction, and military missions. It is a small, low profile machine that is controlled remotely by an operator and can assist with tasks like cleaning rock slopes after blasting. It can work continuously in difficult conditions and handle 50-120 tons of ore per hour, increasing productivity and safety. Testing has shown it performs well in real mine conditions.

1. XLPD
www.dok-ing.com

2. MVD XLPD
The MVD Extra Low Profi le (XLP)
Dozer is designed as a very low
profi le, remote-controlled machine for
multiple uses such as underground
mining, construction, military and
defence missions. Low profi le and
remote control makes it suitable for
multi-purpose tasks and missions.
The fi rst platform was developed in 2003 when
the South African mining sector expressed a need
for a small machine which could assist with the
cleaning of slopes after blasting. It is controlled by
a single operator using a simple and convenient
hand-held remote control unit. The experience
has shown that most people can be trained within
a period of several days to operate the machine.
SAFE SIDE OF MINING
Although the development of the MVD had been done under the specifi c
requirements, the following was taken into consideration:
• Safety of personnel working in the
mine
• Safety of machine operators
• Environmental protection
• High performance in the most diffi cult
working conditions
02 / DOK-ING XLPD
• Low maintenance requirements
• Capable of operating on inclines up to
30 degrees
• Ability to work in high temperatures up
to 50°C

3. DOK-ING XLPD / 03

4. Tool Attachments
The MVD XLP Dozer has a blade as a
standard operating tool. The blade is used
for digging and pushing theblasted ore in
front of the machine. During operation,
the MVD is capable of handling 50 to
120 tons of ore per hour. The machine
is designed to work continuously with
minimal maintenance and downtime.
Maintenance and repairs can be carried
out in the fi eld or in certifi ed service
centers, and the tools required are
standard wrenches and some specially
modifi ed tools.
04 / DOK-ING XLPD
The additional operating tool attachment
is a bucket that can be used as a blade
or as a carrier of ore, but also serves as a
front end loader. It can easily be mounted
on the prime mover or exchanged in a
short time with the original blade. The
capacity of the bucket is 0,65 to 1,0 cubic
meter of ore. During the operations, the
machine with the bucket is capable of
handling even more tons of ore per hour
than with the blade.

5. EXCELLENT
PERFORMANCE
INDICATORS
DOK-ING XLPD / 05
The MVD XLP Dozer system weights
around 4 tons, and tests and evaluations
done in real mines showed that the
machine is capable of handling 50 to 120
tons of ore per hour, thus increasing the
productivity by several times. It also greatly
increases the safety of mineworkers.
The MVD XLP Dozer has proved to be
essential part of the mine equipment since
it can be intensively used in the most severe
working conditions and it has the ability
to work in extremely high temperatures.
High performance, modular design, lowest
possible maintenance requirements and
environmental protection are features that
make the MVD XLP Dozer a high quality
product for mining sector.

6. Approved in Mine
Conditions
The machine has been developed according to real
demonstrated requirements and user needs for maximum
performance, versatility and safety. Because of it
dimensions, very good maneuverability, high engine power,
and low track-ground pressure, the MVD XLP Dozer can
work year round in almost all conditions.
This has been confi rmed by the effectiveness
measured in the mines of South Africa for the
last fi ve years.
06 / DOK-ING XLPD

7. DOK-ING XLPD / 07
Post Sale
Support
The major components not produced
by DOK-ING such as the motor and
hydraulics are provided by large,
international companies thus ensuring
long-term availability of spare parts.
DOK-ING also maintains adequate
stocks of spare parts on its premises.
The in-house service capabilities allow
DOK-ING to send maintenance team
or spare parts at short notice to any
location in the world.
Training of the operators is a part of
the post-sale support. The MVD XLP
Dozer is easily operated by a remote
control, and the experience has shown
that most people can learn to operate
the machine within a period of several
days.

8. XLPD TECHNICAL CHARACTERISTICS
Dimensions (L x W x H)
Prime mover 2600 x 1380 x 834 mm
Prime mover with blade tool 3435 x 1436 x 834 mm
XLPP Clearance
Ground clearance 130 mm
Weight
Weight with tool 4150 kg
Engine
Engine designation DEUTZ DIESEL 3100 ccm, 4 cylinder
Power rating 88 HP at 2800 RPM
Direction of rotation Clockwise
Electrical system 24 V
Fuel capacity 60 liters
Fuel consumption 6 - 12 liters/hour
Power transmission
Hydraulic oil 110 liters
Propulsion Hydro static
Drive train Track driven
Travelling speed 0 - 5 km/h
Working speed 0.3 - 1.2 km/h
Others
Productivity 50 - 120 t/h
Chassis 20 mm steel plate
Data communication FSK - 433 MHz
Lights LED technology
DOK-ING Ltd.
Kanalski put 1, 10000 Zagreb, Croatia
T +385 1 2481 300 / F +385 1 2481 303
info@dok-ing.com / www.dok-ing.com