The document provides an overview of topics related to improving boiler performance and extending boiler life. It discusses boiler design considerations for Indian coals, including conservative furnace heat loadings and plain tube arrangements. It also covers life assessment of boilers, combustion optimization measures like minimum flue gas temperature and excess air, and operation and maintenance topics such as valve fundamentals and safety relief valves. Case studies on clinkering buildup issues and questions from attendees are also included.
Incepted in 2007, Urja Thermal Solutions is a prominent company engaged in the Manufacturing, Exporting and supplying of Thermal Solutions. The company is working under the valuable assistance of its Owner, Mr. Swapnil Gautam. His successful contribution has helped the company grow in leaps and bounds. The company is located in Mumbai, Maharashtra.
The document describes a new generation of coal-fired, cost-efficient, fully automated and extended shaft producer gas plant. It provides details on the producer gas composition and process, and estimates cost savings of using producer gas compared to fuel oil. Safety interlocks are also described to ensure safe operation including controls for gas output, steam addition, pressure monitoring and automatic valve closing in failure scenarios.
Jeff Johnson will provide training on GeoSystems' new geothermal heat pump product lines, the ECONAR Cold Climate and GeoSource High Efficiency. The training will cover the new cabinet designs, components, and control systems, including installation of circulating pumps, thermistor inputs, and operating the control interface. The technical update aims to familiarize trainees with the new product offerings and review installation and operation.
- The document discusses Mayekawa Mfg. Co., Ltd.'s NH3/CO2 refrigeration system called "NewTon". It aims to provide energy conservation and comply with environmental regulations by using natural refrigerants.
- NewTon uses a prefabricated package for the NH3 refrigeration cycle that is tested and assembled in the factory prior to shipping. This allows for quicker onsite installation and minimizes NH3 charge.
- Performance data shows NewTon provides significant power reductions of 19-41% compared to previous HCFC-22 systems in various cold storage applications. It also has higher energy efficiency factors compared to HCFC-22 freezer systems.
This document provides specifications for an FPI 660P generator set including:
- KW and KVA ratings at 50Hz and 60Hz frequencies and 0.8 power factor.
- Definitions of prime power and standby power ratings.
- Engine speed, fuel consumption, cooling airflow, and other engine data.
- Alternator model number, voltage, KVA rating, and performance data.
- Enclosure dimensions and weights for open and enclosed options.
- Generator protection features including over/under voltage, frequency, and current.
- Controller model with features like event logging, analog/digital inputs/outputs.
13 ta data sheet - flypartsguy.com - 10.2018FrankEasel
- The document provides specifications for a Weichai America Corp WP13GTA engine, including its type, dimensions, performance ratings, thermal balance, weight and other technical details.
- It is an inline 6-cylinder 4-stroke engine with a displacement of 12.54 liters. Maximum power output is 313.9 kW at the flywheel on natural gas and 202.4 kW on liquid propane gas.
- Additional details provided include air and fuel system specifications, cooling and lubrication systems, electrical system specifications, and performance curves.
This document provides specifications for a Weichai America Corp. WP4GNA 4.5L engine. It has 4 cylinders, is naturally aspirated, and has a displacement of 274.8 cubic inches or 4.5 liters. At rated load, it produces 59 horsepower on natural gas and 63 horsepower on liquid propane gas. It has a mean piston speed of 1279.5 feet/minute and rotates clockwise when viewed from the flywheel.
The document provides an overview of topics related to improving boiler performance and extending boiler life. It discusses boiler design considerations for Indian coals, including conservative furnace heat loadings and plain tube arrangements. It also covers life assessment of boilers, combustion optimization measures like minimum flue gas temperature and excess air, and operation and maintenance topics such as valve fundamentals and safety relief valves. Case studies on clinkering buildup issues and questions from attendees are also included.
Incepted in 2007, Urja Thermal Solutions is a prominent company engaged in the Manufacturing, Exporting and supplying of Thermal Solutions. The company is working under the valuable assistance of its Owner, Mr. Swapnil Gautam. His successful contribution has helped the company grow in leaps and bounds. The company is located in Mumbai, Maharashtra.
The document describes a new generation of coal-fired, cost-efficient, fully automated and extended shaft producer gas plant. It provides details on the producer gas composition and process, and estimates cost savings of using producer gas compared to fuel oil. Safety interlocks are also described to ensure safe operation including controls for gas output, steam addition, pressure monitoring and automatic valve closing in failure scenarios.
Jeff Johnson will provide training on GeoSystems' new geothermal heat pump product lines, the ECONAR Cold Climate and GeoSource High Efficiency. The training will cover the new cabinet designs, components, and control systems, including installation of circulating pumps, thermistor inputs, and operating the control interface. The technical update aims to familiarize trainees with the new product offerings and review installation and operation.
- The document discusses Mayekawa Mfg. Co., Ltd.'s NH3/CO2 refrigeration system called "NewTon". It aims to provide energy conservation and comply with environmental regulations by using natural refrigerants.
- NewTon uses a prefabricated package for the NH3 refrigeration cycle that is tested and assembled in the factory prior to shipping. This allows for quicker onsite installation and minimizes NH3 charge.
- Performance data shows NewTon provides significant power reductions of 19-41% compared to previous HCFC-22 systems in various cold storage applications. It also has higher energy efficiency factors compared to HCFC-22 freezer systems.
This document provides specifications for an FPI 660P generator set including:
- KW and KVA ratings at 50Hz and 60Hz frequencies and 0.8 power factor.
- Definitions of prime power and standby power ratings.
- Engine speed, fuel consumption, cooling airflow, and other engine data.
- Alternator model number, voltage, KVA rating, and performance data.
- Enclosure dimensions and weights for open and enclosed options.
- Generator protection features including over/under voltage, frequency, and current.
- Controller model with features like event logging, analog/digital inputs/outputs.
13 ta data sheet - flypartsguy.com - 10.2018FrankEasel
- The document provides specifications for a Weichai America Corp WP13GTA engine, including its type, dimensions, performance ratings, thermal balance, weight and other technical details.
- It is an inline 6-cylinder 4-stroke engine with a displacement of 12.54 liters. Maximum power output is 313.9 kW at the flywheel on natural gas and 202.4 kW on liquid propane gas.
- Additional details provided include air and fuel system specifications, cooling and lubrication systems, electrical system specifications, and performance curves.
This document provides specifications for a Weichai America Corp. WP4GNA 4.5L engine. It has 4 cylinders, is naturally aspirated, and has a displacement of 274.8 cubic inches or 4.5 liters. At rated load, it produces 59 horsepower on natural gas and 63 horsepower on liquid propane gas. It has a mean piston speed of 1279.5 feet/minute and rotates clockwise when viewed from the flywheel.
Our factory has been manufacturing high quality graphite electrodes since 2003. We have full production capabilities from calcining to finishing. Our main product, graphite electrodes, are approved by clients from many countries and meet specifications for normal power, high power, and ultra-high power grades. We can produce electrodes from 75-600mm in diameter with lengths from 1600-2200mm and nipples of various thread patterns. Our production process and equipment enable us to ensure high quality.
1. The document provides specifications for various professional catering equipment, including hot plates, cookers, fryers, and other appliances.
2. The equipment is made of stainless steel and uses gas or electric heating. Specifications include dimensions, power usage, and other technical details.
3. The document appears to be a catalog for Hotmax 600 brand commercial kitchen equipment for sale in Turkey, with specifications provided in both English and Turkish.
The document provides contact and product information for Oppein Home Group Inc., a kitchen appliances and accessories manufacturer based in Guangzhou, China. It lists the sales departments and contact information for various international markets. It then provides specifications and details for several range hood, cooktop, and oven models. The models are made of stainless steel and glass, have various lighting and ventilation functions, and comply with energy efficiency standards. Dimensions, weight, power requirements and packaging information is provided for each product.
Integrative high pressure solar water heater Jussi Han
Haiyan Uniepu Trading Co., Ltd is a subsidiary of Uniepu Electric Co., Ltd that manufactures and sells solar water heaters, solar panels, and other renewable energy products. They have over 500 employees including an in-house R&D team. Their product line includes solar water heaters, LED lighting, and solar panels. They export to several countries and aim to provide renewable energy solutions and quality customer service.
The document provides specifications for the PHWPortable, Electric-Powered, Diesel-Heated, Hot Water Pressure Washer. It can produce up to 4.8 GPM at 3000 PSI. It features a Landa pump with a 7-year warranty and patented Cool Bypass system. It has optional remote control, auto start/stop, and is designed for durability, safety, and ease of maintenance.
Product catalog for industrial electric heating and freeze protection solutions. Used for temperature maintenance or to prevent freezing of flowing fluids or gases in tanks, pipes, vessels, and lab equipment.
This document provides a list of commercial products from Innovative Water Treatment Products, including cooling tower products, biocides, closed loop treatments, and plumbing and HVAC tools. It describes each product's purpose and application. Contact information is provided at the top for inquiries.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
This document provides information on gas cutting equipment from The Harris Products Group. It includes specifications and part numbers for various oxy-fuel cutting torches and tips for different industries. It also describes an iron powder starter kit for cutting stainless steel and other difficult metals, including the torch, dispenser, hoses and regulators included. The document advertises solutions for fabricators, demolition, foundries, scrap and recycling customers.
Early in the 1920's Joseph M. Whalen was employed starting out as a sheet metal mechanic and later was made foreman. He acquired the company name and equipment in 1932 when the concern encountered financial difficulties in the depression era.
HDOT one of the topmost Manufacturing Units in IndiaGitanjali Singh
One of the esteemed fabrication units in India part of Hindustan Dorr Oliver; it manufactures several process equipments(solid liquid separation equipments, vacuum filtration products) utilised in water treatment plants, sewage treatment plants, ETPs, Pulp and paper mills, sugar plants, mineral processing units apart from food& beverages. Over and above it fabricated PVHE equipments for refineries, fertilisers, petrochemicals etc.
Airtherm Engineering completed an installation of their MasterFlue chimney system at Slough Police Station. The system serves two Potterton Derwent atmospheric boilers and one Hamworthy water heater. The Nova chimney system is suitable for multi-fuel and commercial applications with diameters from 100mm to 600mm. It is made from 316L stainless steel on the inside and 304 stainless steel on the outside, with 25mm thick rockwool insulation in between.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
Quotation of 500 tpd paroiled rice milling plant cbeclAbu Rayhan
Acme Agro Group Limited provides a quote for a 500TPD integrated parboiled rice milling plant. The quote includes equipment for parboiling, drying, husking, whitening, sorting, and packaging rice. The total cost is $967,199.20 for supply, installation, and training. The plant will have a capacity of 20 tons per hour and require around 10 shipping containers to transport. Acme will provide a one year warranty and lifetime after-sales service.
The document provides specifications for a line of portable heating equipment produced by Campo Equipment, including oil, gas, and electric models ranging from 400,000 BTU/hr to 2,000,000 BTU/hr. It lists technical details such as input and output capacities, fuel consumption rates, dimensions, voltage and other electrical specifications for their Blaze series of 400 through 2000 portable indirect-fired oil and gas heating units and electric heating options.
This document describes PTFE-insulated heating cables type ELKM-AG-H that can be used for industrial applications such as heating pipes, drums, tanks, and other equipment. The cables are suitable for hazardous areas and can withstand high mechanical stress and temperatures up to 260°C. They offer advantages like high chemical and mechanical resistance, easy installation, and flexibility.
This document provides specifications for a 360 degree cordless jug kettle from CT-CHAN Supply Chain Management Co.,Ltd. It describes the kettle's features such as its stainless steel heating element, LED light, auto switch-off, and water level indicator. Safety features including overheating protection are also noted. Dimensions and weight are provided along with packing specifications for shipping the kettles in three different configurations by container.
The document discusses the design and operation of a coal handling plant (CHP) system with two stages. The CHP transports coal from mines to bunkers and maintains the correct size, quality, and quantity of coal. Stage I has a capacity of 1250 MT/hr while Stage II has a higher capacity of 1500 MT/hr. The CHP includes conveyor belts, coal crushers, bunkers, stockpiles, and transport hoppers. The document provides details on the layout, equipment specifications, coal quality parameters, and operating procedures of the multi-stage CHP system.
This document describes a project to design an LPG refrigerator. A group of mechanical engineering students submitted the project, guided by their professor. The document includes an abstract, introduction, working principle, components, specifications, cost sheet, results, advantages/disadvantages, applications, and conclusion. It finds that using LPG as the refrigerant can achieve a coefficient of performance of 2.25 and final evaporator temperature of -10°C, while eliminating issues with electricity availability. The system works by reducing the pressure and temperature of LPG in a capillary tube to produce cooling.
Secrets of a Successful Sale: Optimizing Your Checkout ProcessAggregage
https://www.onlineretailtoday.com/frs/26905197/secrets-of-a-successful-sale--optimizing-your-checkout-process
Once upon a time, in the vast realm of online commerce, there lived a humble checkout button overlooked by many. Yet, within its humble click lay the power to transform a mere visitor into a loyal customer. 🧐 💡
Getting checkout right can mark the difference between a successful sale and an abandoned cart, yet many businesses fail to make payments a part of their commerce strategy even when it has a direct impact on revenue. But payments are just one part of a chain. What’s the next touch point? How do you use the data sitting behind a payment to find the next loyal customer?
In this session you’ll learn:
• The integral relationship between payment experience and customer satisfaction
• Proven methods for optimizing the checkout journey
• Leveraging payments data for personalized marketing and enhanced customer loyalty
• Gain invaluable insights into consumer behavior across online and offline channels through data
Our factory has been manufacturing high quality graphite electrodes since 2003. We have full production capabilities from calcining to finishing. Our main product, graphite electrodes, are approved by clients from many countries and meet specifications for normal power, high power, and ultra-high power grades. We can produce electrodes from 75-600mm in diameter with lengths from 1600-2200mm and nipples of various thread patterns. Our production process and equipment enable us to ensure high quality.
1. The document provides specifications for various professional catering equipment, including hot plates, cookers, fryers, and other appliances.
2. The equipment is made of stainless steel and uses gas or electric heating. Specifications include dimensions, power usage, and other technical details.
3. The document appears to be a catalog for Hotmax 600 brand commercial kitchen equipment for sale in Turkey, with specifications provided in both English and Turkish.
The document provides contact and product information for Oppein Home Group Inc., a kitchen appliances and accessories manufacturer based in Guangzhou, China. It lists the sales departments and contact information for various international markets. It then provides specifications and details for several range hood, cooktop, and oven models. The models are made of stainless steel and glass, have various lighting and ventilation functions, and comply with energy efficiency standards. Dimensions, weight, power requirements and packaging information is provided for each product.
Integrative high pressure solar water heater Jussi Han
Haiyan Uniepu Trading Co., Ltd is a subsidiary of Uniepu Electric Co., Ltd that manufactures and sells solar water heaters, solar panels, and other renewable energy products. They have over 500 employees including an in-house R&D team. Their product line includes solar water heaters, LED lighting, and solar panels. They export to several countries and aim to provide renewable energy solutions and quality customer service.
The document provides specifications for the PHWPortable, Electric-Powered, Diesel-Heated, Hot Water Pressure Washer. It can produce up to 4.8 GPM at 3000 PSI. It features a Landa pump with a 7-year warranty and patented Cool Bypass system. It has optional remote control, auto start/stop, and is designed for durability, safety, and ease of maintenance.
Product catalog for industrial electric heating and freeze protection solutions. Used for temperature maintenance or to prevent freezing of flowing fluids or gases in tanks, pipes, vessels, and lab equipment.
This document provides a list of commercial products from Innovative Water Treatment Products, including cooling tower products, biocides, closed loop treatments, and plumbing and HVAC tools. It describes each product's purpose and application. Contact information is provided at the top for inquiries.
This document discusses replacing oxygen and acetylene cutting equipment on ships with more modern plasma cutting technology. It introduces the Hypertherm PowerMax30 Air plasma cutter, which has a built-in air compressor so no air lines are needed. This makes the equipment more portable and eliminates the costs, safety issues, and logistics of using oxygen and acetylene cylinders. It also presents the MULTIPEARL 200-4 XL inverter as a multi-process welder and the Superfire 2 torch for brazing and heating work.
This document provides information on gas cutting equipment from The Harris Products Group. It includes specifications and part numbers for various oxy-fuel cutting torches and tips for different industries. It also describes an iron powder starter kit for cutting stainless steel and other difficult metals, including the torch, dispenser, hoses and regulators included. The document advertises solutions for fabricators, demolition, foundries, scrap and recycling customers.
Early in the 1920's Joseph M. Whalen was employed starting out as a sheet metal mechanic and later was made foreman. He acquired the company name and equipment in 1932 when the concern encountered financial difficulties in the depression era.
HDOT one of the topmost Manufacturing Units in IndiaGitanjali Singh
One of the esteemed fabrication units in India part of Hindustan Dorr Oliver; it manufactures several process equipments(solid liquid separation equipments, vacuum filtration products) utilised in water treatment plants, sewage treatment plants, ETPs, Pulp and paper mills, sugar plants, mineral processing units apart from food& beverages. Over and above it fabricated PVHE equipments for refineries, fertilisers, petrochemicals etc.
Airtherm Engineering completed an installation of their MasterFlue chimney system at Slough Police Station. The system serves two Potterton Derwent atmospheric boilers and one Hamworthy water heater. The Nova chimney system is suitable for multi-fuel and commercial applications with diameters from 100mm to 600mm. It is made from 316L stainless steel on the inside and 304 stainless steel on the outside, with 25mm thick rockwool insulation in between.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
Quotation of 500 tpd paroiled rice milling plant cbeclAbu Rayhan
Acme Agro Group Limited provides a quote for a 500TPD integrated parboiled rice milling plant. The quote includes equipment for parboiling, drying, husking, whitening, sorting, and packaging rice. The total cost is $967,199.20 for supply, installation, and training. The plant will have a capacity of 20 tons per hour and require around 10 shipping containers to transport. Acme will provide a one year warranty and lifetime after-sales service.
The document provides specifications for a line of portable heating equipment produced by Campo Equipment, including oil, gas, and electric models ranging from 400,000 BTU/hr to 2,000,000 BTU/hr. It lists technical details such as input and output capacities, fuel consumption rates, dimensions, voltage and other electrical specifications for their Blaze series of 400 through 2000 portable indirect-fired oil and gas heating units and electric heating options.
This document describes PTFE-insulated heating cables type ELKM-AG-H that can be used for industrial applications such as heating pipes, drums, tanks, and other equipment. The cables are suitable for hazardous areas and can withstand high mechanical stress and temperatures up to 260°C. They offer advantages like high chemical and mechanical resistance, easy installation, and flexibility.
This document provides specifications for a 360 degree cordless jug kettle from CT-CHAN Supply Chain Management Co.,Ltd. It describes the kettle's features such as its stainless steel heating element, LED light, auto switch-off, and water level indicator. Safety features including overheating protection are also noted. Dimensions and weight are provided along with packing specifications for shipping the kettles in three different configurations by container.
The document discusses the design and operation of a coal handling plant (CHP) system with two stages. The CHP transports coal from mines to bunkers and maintains the correct size, quality, and quantity of coal. Stage I has a capacity of 1250 MT/hr while Stage II has a higher capacity of 1500 MT/hr. The CHP includes conveyor belts, coal crushers, bunkers, stockpiles, and transport hoppers. The document provides details on the layout, equipment specifications, coal quality parameters, and operating procedures of the multi-stage CHP system.
This document describes a project to design an LPG refrigerator. A group of mechanical engineering students submitted the project, guided by their professor. The document includes an abstract, introduction, working principle, components, specifications, cost sheet, results, advantages/disadvantages, applications, and conclusion. It finds that using LPG as the refrigerant can achieve a coefficient of performance of 2.25 and final evaporator temperature of -10°C, while eliminating issues with electricity availability. The system works by reducing the pressure and temperature of LPG in a capillary tube to produce cooling.
Secrets of a Successful Sale: Optimizing Your Checkout ProcessAggregage
https://www.onlineretailtoday.com/frs/26905197/secrets-of-a-successful-sale--optimizing-your-checkout-process
Once upon a time, in the vast realm of online commerce, there lived a humble checkout button overlooked by many. Yet, within its humble click lay the power to transform a mere visitor into a loyal customer. 🧐 💡
Getting checkout right can mark the difference between a successful sale and an abandoned cart, yet many businesses fail to make payments a part of their commerce strategy even when it has a direct impact on revenue. But payments are just one part of a chain. What’s the next touch point? How do you use the data sitting behind a payment to find the next loyal customer?
In this session you’ll learn:
• The integral relationship between payment experience and customer satisfaction
• Proven methods for optimizing the checkout journey
• Leveraging payments data for personalized marketing and enhanced customer loyalty
• Gain invaluable insights into consumer behavior across online and offline channels through data
It’s no secret that the marketing landscape is growing increasingly complex, with numerous channels, privacy regulations, signal loss, and more. One of the biggest problems facing marketers today is that they’re experiencing data deluge and data drought simultaneously.
Bliss Point by Tinuti addresses these challenges by providing a single, user-friendly platform for measuring what marketers previously struggled to measure. With Bliss Point, you can move beyond simply validating past actions and instead use measurement to guide real-time decision-making on what should happen next.
Join our product experts for a live demonstration of Bliss Point. Discover how it can empower your brand with the tools and insights needed to optimize each channel, across your entire media mix, and your overall brand performance.
3. PH08-S, STEEL
PH08-SS, STAINLESS STEEL
● Total Height:2210mm
● Net Weight: 26KGS
● Gross Weight: 31KGS
● Package: Brown Carton 136*54*31CM
● Loading quantity: 123PCS/20GP ;
250PCS/40GP ;
298PCS/40HQ
● MOQ:123PCS/20GP
PH08-S, STEEL
PH08-SS, STAINLESS STEEL
● Total Height: 1800mm
● Net Weight: 24KGS
● Cross Weight:28KGS
● Package: Brown Carton 95*51*33CM,
● Loading quantity: 176PCG/20GP ;
359PCS/40GP ;
419PCS/40HQ
COMMON
● Valve: Low output to high output, with pilot
● Nozzle: 1.5mm
● Igniter: Battery Igniter
● Gas Inlet: 1/4, 5/8 depends on countries
● Tank size: 5 to 13kgs
● Surrounding heating area:15m+2
● Type of burner: Ceramic
● Type of safety device: Fence
● Fuel consumption: 800g/hour
LPG only and not included in price
● Output:37500BUT/11.5KW
● Tilt off function
ONE YEAR WARRANTY
● Payment: T/T, L/C, DP etc
● Certification: CE, ETL, CSA, AGA
● Lead time : 30 to 40 Days for a 40' container
after receipt of deposit
PH08 2.2&1.8M-Pyramid Heater
http://xheating.com/category/outdoor-heaters/
4. ● Total Height: 2330mm
● Gross/Net. Weight: 35.5KGS/32.9KGS
● Valve: Low output to high output, with pilot
● Nozzle: 1.5mm
● Igniter: Battery Igniter
● Gas Inlet: 1/4, 5/8 depends on countries
● Payment Term: T/T, L/C
Approval: CE, ETL, CSA, AGA
● Leading Time: 25 Days for a 40' container
● Extra Spare Part: Wheels, regulator & gas hose,
PE cover and water tank (Does no included in price)
● Package: Brown Carton 140*74*25
● Container Loading Quantity:
216PCS/40’; 240PCS/40’H
Dynamic led option
PH08-T-S STEEL
PH08-T-SS STAINLESS STEEL
http://xheating.com/category/outdoor-heaters/
5. PH08 2.3M Triangle,2.2M,Square
PH08-S, STEEL
PH08-SS, STAINLESS STEEL
Pyramid, Triangle specification:
● Total Height :2210mm, 1800mm
Approval: CE, CSA
More detail see file in last pages.
http://xheating.com/category/outdoor-heaters/
6. PH08-S-RC/SS-RC
Dynamic led option
PH08-S-RC STEEL/BLACK
PH08-SS-RC STAINLESS STEEL
•Total Height: 2210mm or 2310mm
•Net Weight: 26KGS // Gross Weight: 31KGS
•Valve: Low output to high output, with pilot
•Nozzle: 1.5mm // Igniter: Battery Igniter
•Gas Inlet: 1/4, 5/8 depends on countries // Tank size: 5 to 13kgs
•Surrounding heating area: 15m2 // Type of burner: Ceramic
•Type of safety device: Fence // Fuel consumption: 800g/hour
•LPG only and not included in price.
•Output: 37500BUT/11.5KW, MAX 12KW
•3 flame level(heating) settings: HIGH / MED / LOW
•Infrared remote control with reception of 25º angle and 6 meters
•Tilt switch for automatic shut off
•360°Central radiate even heating system
•2~3 seconds ignition delay to prevent accidental ignition.
•ONE YEAR WARRANTY
•Payment :T/T, L/C
•Certification:/approval: CSA
•Lead time: 50 Days for a 40' container
•EXTRA SPARE PART (Does no included in price):
•Package: Brown Carton 136*54*31CM
•Loading quantity: 150PCS/20‘; 302PCS/40‘
•MOQ:150PCS
http://xheating.com/category/outdoor-heaters/
7. Table Flame Heater-PH15
PH05-S, STEEL
PH05-SS, STAINLESS STEEL
Total Height: 900mm
Net Weight: 7.3KGS
Gross Weight: 9.5KGS
Reflector: Dia.250mm x 250mm square in ALU
Base: 280*280mm as a square
Flame screen: 115mm dimension as a circle
Power: 3000W/11000BTU
Fuel: 1Pound gas cylinder
ONE YEAR WARRANTY
Payment: T/T, L/C
Certification: CE, CSA
Lead time: 35 Days for a 40' container
EXTRA SPARE PART: Price includes regulator FOR ETL
PACKAGING: Brown Carton 33*33*98CM
Container loading quantity: 448/20GP; 928/40GP; 1080/40HC
http://xheating.com/category/outdoor-heaters/
8. PH08 NEW
PH08 NEW STEEL
Net/Gross Weight: 26KGS /31KGS
Valve: Low output to high output, with pilot
Nozzle: 1.5mm
Igniter: Battery Igniter
Gas Inlet: 1/4, 5/8 depends on countries
Middle Board: Stainless Steel
Control Box: Black Powder Coated
Base Board: Aluminum casting
Support Pose: Aluminum
Upper board: Stainless Steel
U Vision Board: Stainless Steel
Wire Guard: Chrome Plated
Wire Guard Fixing part: Stainless Steel
Body Cover Board: Stainless Steel*4pieces
BASE: Cast Aluminum
Output: 9.3KW/Hour by Propane/LPG
Extra part: Handle*1; Chain*1
ONE YEAR WARRANTY
Payment: T/T
Certificate: CE, ETL, CSA
Lead time: 35Days for a 40' container after receipt of deposit
MOQ: 280PCS/40HQ
Loading quantity: 232PCS/40'GP, 280PCS/40HQ
Exclude: ANDREGULATOR&HOSE SET OR COVER NOT INCLUDIED
http://xheating.com/category/outdoor-heaters/
9. PH08 NEW -1
STEEL, POWER COATED
STAINLESS STEEEL
•Net/Gross Weight: 26KGS/ 31KGS
•Flame heater model: HRMLXD-E-HS(Powder coated & stainless steel)
•Reflector: Dia.790mm*105mm(H)
•Total Height: 2210mm(H)
•Power: 5000--12500Watts
•Starter:Piezoelectric Ignition and variable gas control valve
Automatic shut-off Device with anti-tilt switch
•Fuel: Propane or Butane gas only
•Flux: 450g--870g/hour
•With Wheel,Output: 9.3KW/Hour by Propane/LPG
•Extra part: Handle*1; Chain*1
•ONE YEAR WARRANTY
•Payment: T/T
•Certificate: CSA
•Lead time: 30Days for a 40' container after receipt of deposit
•MOQ: 250PCS/40HQ
•Loading quantity: 250/40HQ
•Exclude: ANDREGULATOR&HOSE SET OR COVER NOT INCLUDIED
http://xheating.com/category/outdoor-heaters/
10. NEW
PH08 NEW STEEL
.Net/Gross Weight: 24KGS /26KGS
•Flame heater model: HMLXDR-E(Glass)
•Reflector: Dia.790mm*105mm(H)
•Total Height: 2210mm(H)
•Power: 5000--10500Watts
•Starter:Piezoelectric Ignition and variable gas control valve
Automatic shut-off Device with anti-tilt switch
•Fuel: Propane or Butane gas only
•Flux: 450g--870g/hour
•With Wheel
•ONE YEAR WARRANTY
•Payment: T/T
•Certificate: CE, ETL, CSA
•Package: 46x130x46cm
•Lead time: 30Days for a 40' container after receipt of deposit
•MOQ: 150PCS/40HQ
•Loading quantity: 105PC/20’GP, 230PCS/40'GP, 275PCS/40HQ
•Exclude: ANDREGULATOR&HOSE SET OR COVER NOT INCLUDIED
http://xheating.com/category/outdoor-heaters/
11. Flame Heater-Round
LBY-A-SS stainless steel
LBY-A-PC Powder coated in colors
Total Height: 2100mm / line square frence
Net Weight: 15KGS / Gross Weight: 17KGS
Base: :φ460 x81mm(H)
Safety mesh: Dia360x860mm
Tank Housing: φ375x715mm(H)
Flame Screen: φ200x125mm(H)
Reflector: φ450mm
Quartz tube: φ120×800mm
Power:41000BTU / Flux: 945g/hr.
Approval: CE, CSA
Fuel: Propane or Butane or their mixture
Packing: 1ctn/1pc
Cube: 46x46x1150mm
Qty20'/40'/40'H 120/250/250
http://xheating.com/category/outdoor-heaters/
12. Flame Heater-Round
LBY-A-SS stainless steel
LBY-A-PC Powder coated in colors
Total Height: 1900mm /diamond/
rhombic fence & line square fence
Net Weight: 15KGS Gross Weight: 17KGS
Base: φ460 x81mm(H)
Safety mesh: Dia360x860mm
Tank Housing: φ375x715mm(H)
Flame Screen: φ200x125mm(H)
Reflector:φ450mm Quartz tube: φ120×800mm
Power:41000BTU Flux: 945g/hr.
Approval: CE, CSA
Fuel: Propane or Butane or their mixture
Packing: 1ctn/1pc
Cube: 46x46x1150mm
Qty20'/40'/40'H 120/250/250
http://xheating.com/category/outdoor-heaters/
13. Flame Heater-Round ith Remote Control
LBY-A-SS stainless steel
LBY-A-PC Powder coated in colors
Total Height: 2000mm/ line square frence
1900mm/ diamond/ rhombic fence & line square fence
Net Weight: 15KGS Gross Weight: 17KGS
Base: :φ460 x81mm(H)
Safety mesh: Dia360x860mm
Tank Housing: φ375x715mm(H)
Flame Screen: φ200x125mm(H)
Reflector: φ450mm
Quartz tube: φ120×800mm
Power: 41000BTU / Flux: 945g/hr.
Approval: CSA
Fuel: Propane or Butane or their mixture
Packing: 1ctn/1pc
Cube: 46x46x1150mm
Qty20'/40'/40'H 120/250/250
http://xheating.com/category/outdoor-heaters/
14. Flame Heater-Round
LBY-A-SS stainless steel
LBY-A-PC Powder coated in colors
Total Height: 2000mm
Net Weight: 15KGS Gross Weight: 17KGS
Base: φ460 x81mm(H) Safety mesh: Dia360x860mm
Tank Housing: φ375x715mm(H) Flame Screen: φ200x125mm(H)
Reflector: φ450mm Quartz tube: φ120×800mm
Power: 41000BTU Flux: 945g/hr.
Approval: CE, ETL, CSA
Fuel: Propane or Butane or their mixture Packing: 1ctn/1pc
Cube: 46x46x1150mm
Qty20'/40'/40'H 120/250/250
http://xheating.com/category/outdoor-heaters/
15. Natural Gas Heater
HLRSS-NG-SS stainless steel
HLRSS-NG-PC Powder coated in colors
Basedia:460mm*86mm(H)*1.05mm(T)
•Top Main Pole Dia: 56mm*520mm(H)*1.17mm(T)
•Middle Main Pole Dia: 56mm*565mm(H)*1.17mm(T)
•Bottom Main Pole Dia: 56mm*565mm(H)*1.17mm(T)
•Burner Unit: dia.277mm*600mm(H)
•Flame Screen: Dia. 275mm*230mm(T)
•Reflector: Dia.813mm*105mm(H)
•Total Height: 2210mm(H)
•Power:41,000BTU
•Fuel: Nature Gas
•Flux:0.33cbm/hr.-1.1cbm/hr.
•Approval: CSA
Packing: 1ctn/1pc
Cube: 46x46x65mm
Qty20'/40'/40’H 200/420/500PCS
http://xheating.com/category/outdoor-heaters/
17. Inferno-PH67,68
Steel, Hammer Tone / Power Coated
Steel, Copper Finish or Gun Metal / Electroplate
Stainless Steel
•Net Weight: 34.5kgs Gross Weight: 40kgs
•Product size: Φ51.5 x 173.4cm
•Output: 40,000BTU
•Surrounding heating area: 3m x 3m
•igniter: electronic igniter
•Spiral S/S emitter
•Certification : CE, CSA, AGA
•Payment: L/C at sight; Or T/T
•Tilt switch for automatic shut off
•100% gas shut off if flame extinguishes
•Retractable design for convenient storage
•Carton Dimension: 58x56.5x131cm, 1pc/ctn
•Loading Quantity: 69pcs/20GP, 144pcs/40GP, 168pcs/40HC
•MOQ: 1X20GP
•Packaging: Brown Carton Box / White carton box
•Client’s cast aluminum badge required
•Price does not include hose & regulator set
•Lead time: 60 days after receipt of deposit.
Hammer Tone // Copper Finish // Gun Metal // Stainless Steel
RETRACTABLE
http://xheating.com/category/outdoor-heaters/
18. Inferno-PH69
RETRACTABLE
STEEL, Powder Coated
STEEL, Electroplate, Copper Finish or Gun Metal
Stainless Steel
Total Height: 1800mm
Net Weight: 34.5KGS
Gross Weight: 37.5KGS
Igniter: electronic Igniter
Spiral S/S emitter in dia.10cm
Product size: Φ51.5*180cm
Surrounding heating area: 6m*6m
Output: 38000BUT
Retractable design for convenient storage
Tilt switch for automatic shut off
Certification: CE ,CSA , AGA
Carton Dimension: 58x56.5x131cm, 1pc/ctn
Price does not include hose & regulator set
Lead time: 60 days after receipt of deposit.
Loading Qty/MOQ:40’HQ–168pcs
http://xheating.com/category/outdoor-heaters/
19. Inferno-PH70
Powder coated
Electroplate
Stainless steel
•Total Height: 1800mm
•Net/Gross Weight: 28KGS/ 32KGS
•Igniter: electronic Igniter
•Product size: Φ51.5*188cm
•Surrounding heating area: 400sq.ft
•Tilt switch for automatic shut off
•Cylindrical Pyrex glass creates a stunning 360 visual effect
•Central flame and cylindrical design delivers even heat
•100%gas shut off if flame extinguishes
•ONE YEAR WARRANTY
•Payment: L/C at sight or 30% deposit
•Certification: CE & CSA & AGA
•Lead Time:60days subjects to the deposit payment arrival
•Carton Dimension: 57x56x110cm,1pc/ctn
•Loading Qty: 20'‐80pcs,40'‐168pcs,40’HQ-168pcs
•Packaging: white box
•Hose and regulator need to pay extra.
NON
RETRACTABLE
http://xheating.com/category/outdoor-heaters/
20. Inferno-PT08
Powder Coated
Gun Metal and Copper Finish
Stainless Steel
•Output: 11,000BTU
•Product size: Dia.30.5 x H.86cm
•Ignition: Push & Turn
•Certification: CSA
•and anti‐tilt switch
•Lead time: 60days subjects to the deposit payment
•Payment: L/C or T/T
•Packaging: Brown box
•MOQ: 1x40’HQ
•Client’s cast aluminum badge required
Cylindrical pyrex glass creates a 360 degree visual effect
Central flame and cylindrical design delivers even heat
Protective screen prevents contact with heat cylinder
Efficient burner system with flame failure device
http://xheating.com/category/outdoor-heaters/
21. Special: LRCH51101
LRCH51101
Camp, finish Portable Infrared Heater
For hunting, fishing, road construction etc.
•Product size: 35.5x39x46cmH
•Net Weight: 8.6kgs
•Cross weight: 10.5kgs
•Ignitor: Push & Turn
•Fuel: LPG gas
•Output: 9,500‐19,000BTU
• Payment: L/C at sight or 30% deposit
•Certification: CSA
•Equipped with safety flame failure
•ODS system
•Suitable for 4.5lb, 5lb cylinder
•Can easily connect to 20lb gas cylinder.
•Easy carry handle
•Safety wire protection screen
•Lead time: 60days subjects to the deposit payment arrival within 7days
•Container load: 520pcs/40’GP, 650pcs/40’HQ
•Packaging: Brown box
•MOQ: 1x40’HQ
•Client’s cast aluminum badge required: +US$2.0/pc
http://xheating.com/category/outdoor-heaters/
23. PH01-S-1/SS-1
PH01-S-1 Steel // PH01-SS-1, Stainless Steel
Net Weight: 16KGS // Net Weight: 17KGS
Gross Weight: 20KGS // Gross Weight: 21KGS
•Total Height: 2200mm
•Reflector: Dia.760mm
•Igniter Electric Igniter
•Control Valve: Variable control valve
•Burner Unit: Dia.250mm
•Flame Screen: 250mm
•Tank Housing: 378mm*H 670mm
•Base: 460mm*H86mm
•Support Post: 20mm*20mm*H720mm
•Main Pole: 50mm*850mm
•Flux: 450g/hr.-870g/hr.
•Approval: CE, CSA, AGA
•Fuel: Propane or Butane or LPG gas only.
•Output: 5-8kw
•Loading of container 375 pieces/40hq
http://xheating.com/category/outdoor-heaters/
24. PH01-S-B/SS-B
PH01-S-B, Steel // PH01-SS-B, Stainless Steel
Net Weight: 16KGS, // Net Weight: 17KGS,
Gross Weight: 20KGS // Gross Weight: 21KGS
FOB SHANGHAI
Total Height:2241mm(H)
5000W~12000W Control: variable control valve
Flame Screen:260mm*220mm(H)
Tank Housing: 378mm*H 780mm
Base:454mm*H86mm
Support Post:20mm*20mm*H720mm
Main Pole:56mm*850mm
Flux:450g/hr.-870g/hr.
Fuel: Propane or Butane or LPG gas only.
Burner Unit: 262mm*540mm(H) Reflector: 813mm
Payment: T/T, L/C
Certification: CE, CSA, AGA
Leading Time:10 to 20 Days for a 40' container
Extra Spare Part: Wheels, regulator & gas hose,
PE cover, and water tank (Does no included in price)
Package: Brown Carton Container: K/D REFLECTOR
Loading Quantity: tank carton: 46x46x90mm
150sets/312sets/375sets for 20'/40GP/40HQ
ONE PIECE REFLECTOR :
main tank:46x46x90mm/reflector:83x83x4mm
135sets/278sets/320sets for 20‘/40GP/40HQ
PH01-SS-B bullet
Material: Stainless steel
http://xheating.com/category/outdoor-heaters/
25. PHO1 –S-SA/SS-SA
PH01-S-SA STEEL // PH01-SS-SA STAINLESS STEEL
Net weight: 17kgs // Net Weight: 16kgs
Cross Weight: 21kgs // Cross Weight: 20kgs
•Reflector: Dia.813mm
•Control Valve: Variable control valve
•Burner Unit: 270mm*H 515mm
•Flame Screen: 270mm*H 220mm
•Main Pole: 56mm*H 850mm
•Support Post: 20mm*20mm*H 720mm
•Tank Housing: 378mm*H 780mm
•Base: Dia: 454mm
•Ignitor: Battery Ignitor
•Total Height: 2241mm
•Flux: 450g/hr.-870g/hr
•Fuel: Propane or Butane or LPG gas only
•Output: 5000W~12000W
•Certification: CE, CSA, AGA
•Payment :T/T, L/C
•Leading time:7-10 Days for a 40' container
•EXTRA SPARE PART: Wheels, regulator & gas hose,
PE cover, and water tank (Does no included in price)
•Container:K/D REFLECTOR
•Loading quantity: tank carton: 46x46x90mm
•150sets/312sets/375sets for 20'/40GP/40HQ
•ONE PIECE REFLECTOR
main tank: 46x46x90mm/
•reflector:83x83x4mm135sets/278sets/320sets for 20'/40GP/40HQ
http://xheating.com/category/outdoor-heaters/
26. PHO1-S-PA/SS-PA
PH01-S-PA STEEL // PH01-SS-PA STAINLESS STEEL
Net Weight: 7kgs // Net Weight: 6.5kgs
Gross Weight: 9kgs // Gross Weight: 8.5Kgs
•Base:Dia.340mmx50mm(H)
•Pole: Dia.50mmx580(H)
•Burner unit:Dia.180mm×280mm(H) in SS
•Flame Screen: Dia.156mm×180mm(H)in SS
•Reflector: Dia.535mmx100mm(H) in ALU
•Total height:880mm(H)
•Power: 3000W
•Fuel:Propane or Butane gas only
•Payment: T/T, L/C
•Certification: CE
•Leading time: 10 Days for a 40' container
•EXTRA SPARE PART: Gas Hose and regulators
•Package: Brown Carton 78*22*57.5mm
•Container Loading Quantity:
290PCS/20’;
600PCS/40’;
660PCS/40’H
http://xheating.com/category/outdoor-heaters/
27. Table top-LRPH01-HPS
• Power Coated
• Gun Metal / Hammer Tone
• Stainless Steel
•Portable Patio Heater powder for 1lb tank
•ODS (Oxygen Depletion Sensor)
•Base:Dia.13.2"×1.97"(H)
•Tank Housing:Dia.5.1"×12.2"
•Pole: Dia.2"×9.45"(H)
•Burner unit:Dia.6.7"×8"(H)
•Reflector: Dia.20.87" in Aluminum
•Total height:37.8" (H) Power: 11,000BTU
•Fuel: Propane or Butane gas only. Payment: T/T, L/C
•Certification: CE
•Leading time: 10 Days for a 40' container
•EXTRA SPARE PART: Gas Hose and regulators
•Package: Brown Carton 78*22*57.5mm
•Container Loading Quantity:
•318PCS/20GP‘; 730PCS/40‘HC;
http://xheating.com/category/outdoor-heaters/
28. PH09-S/-SS
PH09-S STEEL
PH09-SS STAINLESS STEEL
•Net Weight: 20kgs
•Gross Weight: 23kgs
•Mesh guard : 370mm
•Control Valve: Variable control valve
•Burner Unit: 262mm
•Flame Screen: 260mm
•Base: Dia:510mm
•Total Height: 1350mm
•Flux: 450g/hr.-940g/hr
•Fuel: Propane or Butane or LPG gas only
•Output: 5000W~13000W
•Payment: T/T, L/C
•Certification: ETL, AGA, CE
•Leading time: 15 Days for a 40' container
•EXTRA SPARE PART: Price includes wheels
•Package: Brown Carton 50*56*76cm
•Container loading quantity:
136PCS/20‘; 280PCS/40‘; 304PCS/40'H
•MOQ: 136PCS
http://xheating.com/category/outdoor-heaters/
29. PH09-S-P/SS-P
PH09-S-P STEEL
PH09-SS-P STAINLESS STEEL
•Total Height: 1360mm
•Net Weight: 14kgs
•Gross Weight: 17kgs
•Mesh guard: 360mm
•Control Valve: Variable control valve
•Burner Unit: 262mm
•Flame Screen: 260mm
•Base: 454mm
•Flux: 450g/hr.-870g/hr
•Fuel: Propane or Butane or LPG gas only
•Output: 5000W~12000W
•Payment: T/T, 100% against full original documents
•Certification: AGA
•Leading time: 30 Days for a 40' container
•EXTRA SPARE PART: The FOB price includes wheels & regulator gas hose
•Package: Brown Carton 46*46*85cm
•Container loading quantity: 150sets/312sets/375sets for 20'/40GP/40HQ
http://xheating.com/category/outdoor-heaters/
30. PH03-S/SS
PH03-S STEEL // PH03-SS STAINLESS STEEL
COPPER FINISH //
Net Weight: 17kgs // Net Weight: 16KGS
Gross Weight: 21kgs // Gross Weight: 20KGS
•Reflector: 813mm
•Total Height: 2241mm
•Base: 454mm*80mm
•Igniter: Electric Igniter
•Control Valve: Variable control valve
•Burner Unit: 272mm*540mm
•Flame Screen: 270mm*210mm
•Main Pole:76mm*950mm
•Support Post: 30mm*30mm*635mm
•Tank Housing: 378mm*H 690mm
•Flux: 450g/hr.-870g/hr.
•Fuel: Propane or Butane or LPG gas only
•Output: 5000W~12000W
•Payment: T/T, L/C
•Certification: CE, CSA, AGA
•Leading time:7-15 Days for a 40' container
•EXTRA SPARE PART: Wheels, regulator & gas hose,
PE cover and water tank (Does no included in price)
•Package: Brown Carton 40*40*90cm
•Contain Loading Quantity: 150sets/312sets/375sets for 20'/40GP/40HQ
•ONE PIECE REFLECTOR
•main tank: 46x46x90mm/reflector:83x83x4mm
•Loading quantity: 135sets/278sets/320sets for 20'/40GP/40HQ
http://xheating.com/category/outdoor-heaters/
31. LRHS-PC/SS/GH
LRHS-PC, STEEL
LRHS-GH, STEEL
LRHS-SS, STAINLESS STEEL
•Total Height: 2210mm
•Base: 533mm*533mm*69MM
•Igniter: Electric Igniter
•Control Valve: Variable control valve
•Burner Unit: 264mm*264mm*486mm
•Flame Screen: 258mm*230mm
•Main Pole:175mm*175mm*560mm
•Support Post: 76mm*76mm*510mm
•Tank Housing: 317mm* *357*560mm
•Flux: 450g/hr.-870g/hr.
•Fuel: Propane or Butane or LPG gas only
•Output: 38000BTU
•Payment: T/T, L/C
•Certification: CE, CSA, AGA
•Leading time:7-15 Days for a 40' container
•EXTRA SPARE PART: Wheels, regulator & gas hose,
PE cover and water tank (Does no included in price)
•Package: Brown Carton 57*57*43cm/88*34*9cm
•Contain Loading Quantity: 340pcs/40GP 350pcs/40HQ
http://xheating.com/category/outdoor-heaters/
33. Steel Hexagon Patio Heater w/
Additional Switchable Gas Torch Head
•40,000 BTU heat output rate;
•Approximate heating area of 19.5 square meter
•800g/h gas consumption
•Integrated push & turn ignition
•Equipped with safety flame failure device and anti-tilt switch
•3pcs Foldable reflector
•Door access for easy tank removal
•LPG only, tank not included.
•Product size: Dia 32.28 x H 88.58 (inch)
•Carton size: 24.4x22.8x38.9 (inch)
•G.W. / N.W.: 89 / 79 (lbs)
•Container load: 40’HQ – 199pcs
•Certification: CSA
•MOQ 2X40’HC
Gas Torch Head
(As accessory
packed with the
heater)
LRPH29
http://xheating.com/category/outdoor-heaters/
34. Deluxe Outdoor Patio Heater
•40,000BTU heat output, heating area about 210 square ft., gas consumption about 800 g/h.
•S/S emitter, efficient burner system with safety flame failure device and anti-tilt switch,
push button electronic ignition & adjustable heat control.
•K.D. reflector in 33.7’’ dia., 20.25’’ dia., / Side open door for easy gas tank access,
•base with wheels for easy moving / LPG only, tank not included.
•Product size: Dia.33.7 x H91.4 (inch) / Carton size: 21.1 x 21.1 x 12.6 (inch)
•G.W. / N.W.: 22.7 / 18.9 lbs / Container load: 212pcs/40’, 238pcs/40’H
•MOQ: 2X40HC / CSA certified.
•GUN METAL, POWER COATED
LRPH30
http://xheating.com/category/outdoor-heaters/
35. Infrared burner system
Digital touch control ignition
Model #: LRPH72 Offset Design Patio Heater
bronze powder coated
Product Description:
Offset design perfect for chatting & dining
High-tech infrared burner system with 30,000 BTU’s,
25% more efficiency than regular burner
Flame failure device and anti-tilt switch
Integrated push & turn ignition
2-pcs stable pole
Side open door for easy tank access
Wheel kit for easy moving
Use with 20lb cylinder
Assembly Required
Packed in one box,
Loading qty:104pcs/40’HQ
CSA certified
MOQ: 2X40HC
http://xheating.com/category/outdoor-heaters/
36. Standard Patio Heater with table
Stainless steel, S/S
Powder coated, steel
•40,000BTU heat output rate
•2-pc poles in Dia.7.62cm, with adjustable bar table
•Approx. heating area 19.6m², 800g/h gas consumption
•Integrated Push & turn ignition
•Equipped with safety flame failure device & tilt switch
•5pcs KD reflector in Dia.82cm
•LPG only, tank not included
•Side open door for easy gas tank access
•Dia.45cm base with wheels for easy moving
•Meas.: 46.5 x 46.5 x 82cm
•N.W. 25kgs, G.W. 27kgs
•Product size: Dia. 82 x H. 220cm
•Loading Qty:
20’-174pcs, 40’-350pcs, 40’HQ-390pcs
•CE, CSA certified
LRPH32
http://xheating.com/category/outdoor-heaters/
37. LRPH33C
48, 000 BTU Patio Heater with table
Stainless steel, S/S
Powder coated, steel
FOB Shenzhen
•Hammer tone bronze powder coated finish
•Heat output: 48,000 BTU
•Heating area: 250 square ft
•Efficient burner system with flame failure device and anti-tilt switch
•Electrical ignition
•Tank access door
•Wheel kit included for easy moving
•17.7” dia. shaft mounted accessory table
in matching hammer-tone finish is included
•LPG only, tank not included
•Product size: Dia 32.28 x H 88.58 (inch)
•Carton size: 18.3 x 18.3 x 32.2 (inch)
•G.W./N.W.: 44 / 39.6(lbs)
•Container Quantity: 390pcs / 40’HQ
•CSA certified
http://xheating.com/category/outdoor-heaters/
38. Outdoor Patio Heater
Stainless steel
Powder coated
•Rust free stainless steel construction.
•48,000 BTU heat output rate; featuring a hidden ignition control knob;
heating area around 250 square ft; gas consumption approximately 900g/h;
•High-efficiency burner system with flame failure device & anti-tilt switch;
•Auto piezo ignition & adjustable heat control;
•5-pcs KD reflector in 32.3" diameter, hose & regulator included.
•2-pcs pole with a height-adjustable bar table.
•LPG only, LPG tank not included.
•Product size:Dia.32.3xH87.8(inch)
•Carton size:18.3x18.3x32.3(inch)
•G.W. / N.W.:46/42(lbs)
•Container load:390pcs/40’HQ
•CSA certified
LRPH34
http://xheating.com/category/outdoor-heaters/