This document provides information on 3MTM Gas Well Stimulant WS-1200, which is used to alter the wettability of sandstone in natural gas wells to allow water and condensate to flow more freely and increase production. It chemically bonds to siliceous surfaces in the well without constricting pores or damaging the core. Laboratory tests show it increases gas permeability by 1.5-3x while field trials saw 1.5x improvements on average over six months. It provides a more durable solution than solvent-only treatments by changing wettability for over a year.
2016.08.15. rotor powder coating using ethocel ph (dow colorcon)Valentyn Mohylyuk
Spray coatings of ethylcellulose for sustained drug release on multi-particulate dosage forms is common in the pharmaceutical industry, but can be disadvantageous because of long process times, need for organic solvent capabilities, and particulate agglomeration.
Using a rotor process technology, ethylcellulose can be applied to drug layered beads as a dry powder; enabling the user to achieve high levels of weight gain in a short period of time while still demonstrating sustained release.
Information will be presented comparing performance and productivity to traditional solvent-based Wurster coating and aqueous-based Wurster coating.
Specialty Polymers for Drivetrain SystemsSolvay Group
This document discusses how specialty polymers from Solvay can be used in drivetrain systems to replace metal components. These high-performance plastics offer benefits like lighter weight, lower manufacturing costs, noise dampening, and resistance to abrasion, corrosion and high temperatures. The polymers discussed include Torlon PAI, KetaSpire PEEK, AvaSpire PAEK and Amodel PPA. These polymers are suitable for a variety of drivetrain components and can improve fuel efficiency while reducing costs compared to metal parts. Tables provide properties and application recommendations for different polymer grades.
This document discusses lubrication solutions from Hydrotex for wastewater treatment plants. It notes that wastewater treatment plant operations have unique challenges like corrosive environments and fluctuating temperatures that put equipment to the test. Hydrotex understands these conditions and offers sustainable lubrication solutions and programs to help reduce maintenance costs, decrease downtime, improve efficiency and reduce carbon footprint. Their products are designed to extend maintenance intervals and optimize equipment protection for the wastewater treatment process.
This document provides information on Chem-Verse Consultants (India) Pvt. Ltd., an ISO 9001 certified company that offers specialty chemical products. It produces high quality lubricants, greases, aerosols and coatings for industries such as defence, railways, textiles, automobiles, engineering, power, petrochemicals, electronics and cement. The company aims to improve productivity, reduce maintenance costs and save energy for customers through its eco-friendly MRO chemical products. It has a fully equipped R&D and quality control laboratory and offers products in different packings from 100ml bottles to 210-litre drums.
Smart NVH solutions for next generation brake designmolykotetl
Noisy brakes are already the number one cause of complaint, and warranty claims, from car owners. And with next generation brake design requiring new materials to deal with extremes of temperature, load and speed, it’s never been more important to address the triple threat of noise, vibration and harshness (NVH).
Presented as part of the renown SAE International webinar series, Dow Corning thought leader Gary Weber discusses the NVH issues emerging through innovation in brake design and the lubricants that can solve them.
Discover real-life application examples and experimental evidence, as well as specific techniques for damping, isolation and absorption.
Discover the smart specialty brake lubricants that are reducing brake drag and rolling, increasing the service life of components and providing effective barriers against chemical, mechanical, thermal and electrical stress.
And if you found this presentation useful, don’t forget to share it and join the discussion below.
This document provides information on Glenium C 317, a polycarboxylate-ether based, high range water reducing admixture for concrete. It was primarily developed for applications requiring high early strength and durability. Glenium C 317 allows for production of concrete with very low water-cement ratios, resulting in high strength concrete. It is chloride free and meets ASTM C494 Type A and F specifications. Glenium C 317 uses a new chemical mechanism compared to traditional water reducers, improving cement dispersion and stabilization. It is recommended for use in precast concrete, self-compacting concrete, and structural concrete requiring early strength.
This document provides information on Professional Fluid Services' product line of engineered solutions for issues related to drilling fluids, including loss circulation materials, cross link polymer technologies, cement spacers, wireline cement and resin kits, resin systems, cement additives, and lab testing and on-site consulting services. It contains product descriptions, applications, and packaging information for various loss circulation material products, cross link polymer technologies, cement spacer products, wireline cement kits, resin, and cement additives. Contact information is provided at the beginning and end of the document.
2016.08.15. rotor powder coating using ethocel ph (dow colorcon)Valentyn Mohylyuk
Spray coatings of ethylcellulose for sustained drug release on multi-particulate dosage forms is common in the pharmaceutical industry, but can be disadvantageous because of long process times, need for organic solvent capabilities, and particulate agglomeration.
Using a rotor process technology, ethylcellulose can be applied to drug layered beads as a dry powder; enabling the user to achieve high levels of weight gain in a short period of time while still demonstrating sustained release.
Information will be presented comparing performance and productivity to traditional solvent-based Wurster coating and aqueous-based Wurster coating.
Specialty Polymers for Drivetrain SystemsSolvay Group
This document discusses how specialty polymers from Solvay can be used in drivetrain systems to replace metal components. These high-performance plastics offer benefits like lighter weight, lower manufacturing costs, noise dampening, and resistance to abrasion, corrosion and high temperatures. The polymers discussed include Torlon PAI, KetaSpire PEEK, AvaSpire PAEK and Amodel PPA. These polymers are suitable for a variety of drivetrain components and can improve fuel efficiency while reducing costs compared to metal parts. Tables provide properties and application recommendations for different polymer grades.
This document discusses lubrication solutions from Hydrotex for wastewater treatment plants. It notes that wastewater treatment plant operations have unique challenges like corrosive environments and fluctuating temperatures that put equipment to the test. Hydrotex understands these conditions and offers sustainable lubrication solutions and programs to help reduce maintenance costs, decrease downtime, improve efficiency and reduce carbon footprint. Their products are designed to extend maintenance intervals and optimize equipment protection for the wastewater treatment process.
This document provides information on Chem-Verse Consultants (India) Pvt. Ltd., an ISO 9001 certified company that offers specialty chemical products. It produces high quality lubricants, greases, aerosols and coatings for industries such as defence, railways, textiles, automobiles, engineering, power, petrochemicals, electronics and cement. The company aims to improve productivity, reduce maintenance costs and save energy for customers through its eco-friendly MRO chemical products. It has a fully equipped R&D and quality control laboratory and offers products in different packings from 100ml bottles to 210-litre drums.
Smart NVH solutions for next generation brake designmolykotetl
Noisy brakes are already the number one cause of complaint, and warranty claims, from car owners. And with next generation brake design requiring new materials to deal with extremes of temperature, load and speed, it’s never been more important to address the triple threat of noise, vibration and harshness (NVH).
Presented as part of the renown SAE International webinar series, Dow Corning thought leader Gary Weber discusses the NVH issues emerging through innovation in brake design and the lubricants that can solve them.
Discover real-life application examples and experimental evidence, as well as specific techniques for damping, isolation and absorption.
Discover the smart specialty brake lubricants that are reducing brake drag and rolling, increasing the service life of components and providing effective barriers against chemical, mechanical, thermal and electrical stress.
And if you found this presentation useful, don’t forget to share it and join the discussion below.
This document provides information on Glenium C 317, a polycarboxylate-ether based, high range water reducing admixture for concrete. It was primarily developed for applications requiring high early strength and durability. Glenium C 317 allows for production of concrete with very low water-cement ratios, resulting in high strength concrete. It is chloride free and meets ASTM C494 Type A and F specifications. Glenium C 317 uses a new chemical mechanism compared to traditional water reducers, improving cement dispersion and stabilization. It is recommended for use in precast concrete, self-compacting concrete, and structural concrete requiring early strength.
This document provides information on Professional Fluid Services' product line of engineered solutions for issues related to drilling fluids, including loss circulation materials, cross link polymer technologies, cement spacers, wireline cement and resin kits, resin systems, cement additives, and lab testing and on-site consulting services. It contains product descriptions, applications, and packaging information for various loss circulation material products, cross link polymer technologies, cement spacer products, wireline cement kits, resin, and cement additives. Contact information is provided at the beginning and end of the document.
This document provides product specifications for D8625R, an efficient anionic emulsion drag reducing agent that is resistant to high salt concentrations. It can be added to fracturing fluids or flowback fluids in low dosages (0.025-0.1%) to achieve up to 70% drag reduction within 1 minute. D8625R dissolves quickly in high salt or poor quality water, allowing for continuous mixing. It does not contain harmful chemicals like alkyl phenol ethoxylates or nonylphenol polyethylene ether, making it more environmentally friendly than other emulsion drag reducing agents.
Croda creates and manufactures specialty chemicals and additives for emission control catalysts. They develop dispersants and rheology modifiers to help catalyst manufacturers optimize their washcoat and substrate manufacturing processes. Their Hypermer KD dispersants and Rheoptima rheology modifiers are used to reduce costs, increase solids loading, and provide better control of catalyst layers during manufacturing. Croda also offers wetting agents under the Multiwet brand to increase the speed and efficiency of catalyst monolith production.
Molecular modelling, the future of lubrication research and developmentmolykotetl
Presented for the first time in the US at the SAE World Congress in Detroit, MOLYKOTE unveil a new technique for designing lubricants, based on molecular modelling. Providing an alternative to the old empirical method (which was based on outdated hydrocarbon data) this technique takes the molecular structure and relates it directly to rheological performance and tribofilm properties. A whole range of new silicone lubricants have already been developed using this method and the potential for future applications is vast.
This document provides technical information about AGILITYTM 1000 Performance LDPE, a high pressure low density polyethylene resin designed for faster blown film processing and higher output rates when blended with LLDPE resins. Some key characteristics include faster processing, maintaining bubble stability at higher rates, and excellent shrink properties. Physical and performance properties of films made from this resin are provided, as well as processing guidelines for blown film fabrication. Product stewardship and regulatory information is also included.
We are a leading manufacturer of specialized rubber sealing products, including oil seals, trailer grease seals, Shock Absorber, valve stem oil seals, PTFE oil seals, PU Seal, dust boots, sealing gaskets, o-rings ,Rubber Sheet and rubber parts.
Loctite Hi-Tack Gasket Sealant is a red colored viscous liquid with a characteristic solvent odor which is a blend of elastomers and resins that is brushable and dries quickly to a highly tacky film. Temp. Range -65ºF to 500ºF
IRJET- Design and Fabrication of Hybrid Petrol TankIRJET Journal
The document describes the design and fabrication of a hybrid petrol tank using high-density polyethylene (HDPE) material to reduce heat transfer and evaporative petrol emissions. HDPE is lightweight and radiates less heat inside an enclosed fuel tank compared to other materials. The researchers tested the heat radiation characteristics of HDPE in different environments to study its effectiveness at matching real-world fuel tank conditions. Resistance temperature detectors were used to measure the tank temperature. Various wiring configurations for the detectors were also discussed to improve measurement accuracy.
This document provides information on Griltex hotmelts for reinforcing composites. It describes how Griltex hotmelts can stabilize and reinforce unidirectional tapes, fabrics, and nonwovens made from carbon, glass, and polymer fibers. The hotmelts improve handling, prevent fraying, and allow gluing of layers. They increase impact resistance and decrease delamination. Tests show increases in peel strength, interlaminar shear strength, and impact resistance when using Griltex hotmelts. The document also discusses applications of Griltex polymers as matrices in thermoplastic composites.
The document discusses a polyolefin encapsulant film from Dow Chemical that improves the lamination process and performance of photovoltaic panels compared to ethylene vinyl acetate (EVA) films. It provides faster lamination cycle times, stronger adhesion, lower moisture transmission, increased reliability over the lifetime of the panel, and better resistance to potential-induced degradation. The film is certified according to UL and IEC standards and has been used successfully in modules that passed IEC testing protocols.
1) Morton provides ice melt products under its trusted brand that are tailored to different temperature ranges and needs. It invests in consumer education and easy-to-understand packaging to guide purchasing.
2) Research showed the optimal application rates for different ice melt products in real conditions. This informed recommendations for professionals on selecting the right product and application amount.
3) For water softening, Morton's System Saver II extends softener life through an effective cleaning formula. It offers advantages over competitors like reducing maintenance and iron build-up.
3MTM ScotchcastTM Electrical Resin 10 is a thixotropic (heavy paste) epoxy resin used for applications requiring a thick coating, such as filling, patching, caulking, and insulating motor stator coils. It cures with minimal sagging and exhibits good physical properties like high thermal and mechanical shock strength, strong adhesion, and resistance to oil and fuel. The resin has a temperature rating of Class B (130°C), is general purpose, and provides high thermal and mechanical shock resistance. It has a mix ratio of 1:1 by weight and cures within 24-48 hours at room temperature or 1 hour at 95°C.
Antala Distribuidor oficial de Molykote, líder mundial en tecnología de lubricación.
http://www.antala.com/product/MOLYKOTE
La gama de lubricantes especiales MOLYKOTE® es líder mundial en tecnología de lubricación con más de 60 años de experiencia, pioneros en incorporar el bisulfuro de molibdeno puro (MoS2) en los lubricantes, nació la tecnología de la lubricación inteligente, Smart Lubrication™ Technology, creando productos específicos para soportar cargas elevadas, altas y bajas temperaturas de trabajo, suciedad y polvo, ambientes químicos agresivos y velocidades extremas.
Estas soluciones de lubricación ayudan al control de la fricción y el desgaste aumentando la fiabilidad de los equipos, generando ahorros de energía y costes, reduciendo las emisiones de CO2 y prolongando los intervalos de lubricación en los ciclos de mantenimiento.
Pastas Lubricantes: Alta concentración de lubricantes sólidos dispensados en aceite
Grasas Industriales: Dispersión de un agente espesante en un alto porcentaje de aceite
Compounds: Lubricante de silicona con poder sellante
Aceites Especiales: aceite de base sintética
Dispersiones: Porcentage bajo de sólido lubricante en aceite
Recubrimientos anti-fricción AFC: Barníz con partículas de sólido lubricante micronizado
http://www.antala.com/product/MOLYKOTE
Prime Flex 900 MV is a single-component, water-activated polyurethane foam for sealing cracks and joints in concrete structures. It has a medium viscosity, expands up to 600% when cured, and forms a flexible closed-cell foam. It is used to inject into actively leaking cracks and joints in water tanks, dams, and other concrete structures to create a watertight seal. Proper storage, mixing, application procedures and safety precautions should be followed.
3MTM ScotchcastTM Resin 1402FR is a halogen free, flame retardant, two component polyurethane resin for insulating and protecting electrical cable joints. It cures at room temperature and provides impact resistance, durability, and protection against moisture, hydrocarbons, and corrosion. The resin meets various European standards and directives and is suitable for indoor, outdoor, underground and submerged applications where flame retardancy and chemical resistance are required.
This document summarizes the properties and usage of 3M Scotchcast Electrical Resin 9, which is a two-part, room-curing epoxy resin. It has a 1:1 mix ratio by weight, low viscosity, and good handling properties. It provides excellent thermal and mechanical shock resistance. The resin has a low exothermic reaction and long pot life, allowing for mixing of large batches. It adheres well while inducing low stress. The document provides details on mixing, degassing, curing, storage, and safety of the resin.
This document provides product information on 3M Scotchcast Electrical Resin 241 and 243. It summarizes that they are two-part, heat-curing epoxy resins that are brown (Resin 241) or unpigmented (Resin 243). The resins are semiflexible, have good adhesion and impact resistance, and are rated for continuous use up to 130°C. They are commonly used for applications like motor encapsulation and transformer potting. The document provides detailed information on the resins' properties, testing methods, usage, handling, storage, and safety.
This document provides product information on 3M Scotchcast Electrical Resin 241 and 243. It summarizes that they are two-part, heat-curing epoxy resins that are brown (Resin 241) or unpigmented (Resin 243). The resins are semiflexible, have good adhesion and impact resistance, and are rated for continuous use up to 130°C. They are commonly used for applications like motor encapsulation and transformer potting. The document provides details on the resins' properties, testing methods, usage instructions, safety precautions, and graphs of viscosity and resistivity over time and temperature.
LOCTITE 420 INSTANT ADHESIVE is a general purpose cyanoacrylate wicking type plastic bonder. Mil Spec: Mil-A-46050C Type II Class I. Commercial Item Description A-A-3097: Type II Class 1.
The DOW FILMTECTM BW30-400 membrane element offers consistent, high-performance reverse osmosis for water treatment. It delivers high quality permeate water while minimizing costs. The element has a wide cleaning pH range and robustness due to its polyamide thin-film composite membrane. It has a high permeate flow rate of 10,500 gallons per day and salt rejection of 99.5% under standard test conditions. The two-page document provides specifications, operating limits, and additional information for using the membrane element.
This document provides information on the properties and applications of 3M Scotchcast Electrical Resin 235, a two-part epoxy resin. It has a low viscosity and cures at temperatures as low as 75°C, making it suitable for impregnating coils and castings. Key properties include a tensile strength of 1300 psi, elongation of 75%, and thermal conductivity of 4.0x10-4. It passes thermal and mechanical shock tests and absorbs minimal moisture. The document provides instructions for mixing, degassing, casting, and curing the resin and lists its storage conditions.
The document summarizes Scotchcast resin joint kits that are designed for insulating and protecting mechanical joints of low voltage energy cables. The kits contain a transparent mould body, Scotchcast 40G resin in a two-chamber bag, foam seals, spacers, and instructions. The kits can be used for indoor, outdoor, underground and submerged applications up to 6kV. The document provides product selection guidelines and test results showing the kits pass insulation and voltage withstand standards.
The document describes 3M Scotchcast resin joint kits 92-NA-x-U, which are designed for joining low voltage energy cables in hazardous areas. The kits provide electrical insulation and mechanical protection of cable joints using a flame retardant and chemical resistant resin. The kits contain a transparent mould body, resin bags with a closed mix system, spacers, tapes, gloves, and instructions. The resin provides insulation for indoor and outdoor applications, including underground and submerged joints.
This document provides product specifications for D8625R, an efficient anionic emulsion drag reducing agent that is resistant to high salt concentrations. It can be added to fracturing fluids or flowback fluids in low dosages (0.025-0.1%) to achieve up to 70% drag reduction within 1 minute. D8625R dissolves quickly in high salt or poor quality water, allowing for continuous mixing. It does not contain harmful chemicals like alkyl phenol ethoxylates or nonylphenol polyethylene ether, making it more environmentally friendly than other emulsion drag reducing agents.
Croda creates and manufactures specialty chemicals and additives for emission control catalysts. They develop dispersants and rheology modifiers to help catalyst manufacturers optimize their washcoat and substrate manufacturing processes. Their Hypermer KD dispersants and Rheoptima rheology modifiers are used to reduce costs, increase solids loading, and provide better control of catalyst layers during manufacturing. Croda also offers wetting agents under the Multiwet brand to increase the speed and efficiency of catalyst monolith production.
Molecular modelling, the future of lubrication research and developmentmolykotetl
Presented for the first time in the US at the SAE World Congress in Detroit, MOLYKOTE unveil a new technique for designing lubricants, based on molecular modelling. Providing an alternative to the old empirical method (which was based on outdated hydrocarbon data) this technique takes the molecular structure and relates it directly to rheological performance and tribofilm properties. A whole range of new silicone lubricants have already been developed using this method and the potential for future applications is vast.
This document provides technical information about AGILITYTM 1000 Performance LDPE, a high pressure low density polyethylene resin designed for faster blown film processing and higher output rates when blended with LLDPE resins. Some key characteristics include faster processing, maintaining bubble stability at higher rates, and excellent shrink properties. Physical and performance properties of films made from this resin are provided, as well as processing guidelines for blown film fabrication. Product stewardship and regulatory information is also included.
We are a leading manufacturer of specialized rubber sealing products, including oil seals, trailer grease seals, Shock Absorber, valve stem oil seals, PTFE oil seals, PU Seal, dust boots, sealing gaskets, o-rings ,Rubber Sheet and rubber parts.
Loctite Hi-Tack Gasket Sealant is a red colored viscous liquid with a characteristic solvent odor which is a blend of elastomers and resins that is brushable and dries quickly to a highly tacky film. Temp. Range -65ºF to 500ºF
IRJET- Design and Fabrication of Hybrid Petrol TankIRJET Journal
The document describes the design and fabrication of a hybrid petrol tank using high-density polyethylene (HDPE) material to reduce heat transfer and evaporative petrol emissions. HDPE is lightweight and radiates less heat inside an enclosed fuel tank compared to other materials. The researchers tested the heat radiation characteristics of HDPE in different environments to study its effectiveness at matching real-world fuel tank conditions. Resistance temperature detectors were used to measure the tank temperature. Various wiring configurations for the detectors were also discussed to improve measurement accuracy.
This document provides information on Griltex hotmelts for reinforcing composites. It describes how Griltex hotmelts can stabilize and reinforce unidirectional tapes, fabrics, and nonwovens made from carbon, glass, and polymer fibers. The hotmelts improve handling, prevent fraying, and allow gluing of layers. They increase impact resistance and decrease delamination. Tests show increases in peel strength, interlaminar shear strength, and impact resistance when using Griltex hotmelts. The document also discusses applications of Griltex polymers as matrices in thermoplastic composites.
The document discusses a polyolefin encapsulant film from Dow Chemical that improves the lamination process and performance of photovoltaic panels compared to ethylene vinyl acetate (EVA) films. It provides faster lamination cycle times, stronger adhesion, lower moisture transmission, increased reliability over the lifetime of the panel, and better resistance to potential-induced degradation. The film is certified according to UL and IEC standards and has been used successfully in modules that passed IEC testing protocols.
1) Morton provides ice melt products under its trusted brand that are tailored to different temperature ranges and needs. It invests in consumer education and easy-to-understand packaging to guide purchasing.
2) Research showed the optimal application rates for different ice melt products in real conditions. This informed recommendations for professionals on selecting the right product and application amount.
3) For water softening, Morton's System Saver II extends softener life through an effective cleaning formula. It offers advantages over competitors like reducing maintenance and iron build-up.
3MTM ScotchcastTM Electrical Resin 10 is a thixotropic (heavy paste) epoxy resin used for applications requiring a thick coating, such as filling, patching, caulking, and insulating motor stator coils. It cures with minimal sagging and exhibits good physical properties like high thermal and mechanical shock strength, strong adhesion, and resistance to oil and fuel. The resin has a temperature rating of Class B (130°C), is general purpose, and provides high thermal and mechanical shock resistance. It has a mix ratio of 1:1 by weight and cures within 24-48 hours at room temperature or 1 hour at 95°C.
Antala Distribuidor oficial de Molykote, líder mundial en tecnología de lubricación.
http://www.antala.com/product/MOLYKOTE
La gama de lubricantes especiales MOLYKOTE® es líder mundial en tecnología de lubricación con más de 60 años de experiencia, pioneros en incorporar el bisulfuro de molibdeno puro (MoS2) en los lubricantes, nació la tecnología de la lubricación inteligente, Smart Lubrication™ Technology, creando productos específicos para soportar cargas elevadas, altas y bajas temperaturas de trabajo, suciedad y polvo, ambientes químicos agresivos y velocidades extremas.
Estas soluciones de lubricación ayudan al control de la fricción y el desgaste aumentando la fiabilidad de los equipos, generando ahorros de energía y costes, reduciendo las emisiones de CO2 y prolongando los intervalos de lubricación en los ciclos de mantenimiento.
Pastas Lubricantes: Alta concentración de lubricantes sólidos dispensados en aceite
Grasas Industriales: Dispersión de un agente espesante en un alto porcentaje de aceite
Compounds: Lubricante de silicona con poder sellante
Aceites Especiales: aceite de base sintética
Dispersiones: Porcentage bajo de sólido lubricante en aceite
Recubrimientos anti-fricción AFC: Barníz con partículas de sólido lubricante micronizado
http://www.antala.com/product/MOLYKOTE
Prime Flex 900 MV is a single-component, water-activated polyurethane foam for sealing cracks and joints in concrete structures. It has a medium viscosity, expands up to 600% when cured, and forms a flexible closed-cell foam. It is used to inject into actively leaking cracks and joints in water tanks, dams, and other concrete structures to create a watertight seal. Proper storage, mixing, application procedures and safety precautions should be followed.
3MTM ScotchcastTM Resin 1402FR is a halogen free, flame retardant, two component polyurethane resin for insulating and protecting electrical cable joints. It cures at room temperature and provides impact resistance, durability, and protection against moisture, hydrocarbons, and corrosion. The resin meets various European standards and directives and is suitable for indoor, outdoor, underground and submerged applications where flame retardancy and chemical resistance are required.
This document summarizes the properties and usage of 3M Scotchcast Electrical Resin 9, which is a two-part, room-curing epoxy resin. It has a 1:1 mix ratio by weight, low viscosity, and good handling properties. It provides excellent thermal and mechanical shock resistance. The resin has a low exothermic reaction and long pot life, allowing for mixing of large batches. It adheres well while inducing low stress. The document provides details on mixing, degassing, curing, storage, and safety of the resin.
This document provides product information on 3M Scotchcast Electrical Resin 241 and 243. It summarizes that they are two-part, heat-curing epoxy resins that are brown (Resin 241) or unpigmented (Resin 243). The resins are semiflexible, have good adhesion and impact resistance, and are rated for continuous use up to 130°C. They are commonly used for applications like motor encapsulation and transformer potting. The document provides detailed information on the resins' properties, testing methods, usage, handling, storage, and safety.
This document provides product information on 3M Scotchcast Electrical Resin 241 and 243. It summarizes that they are two-part, heat-curing epoxy resins that are brown (Resin 241) or unpigmented (Resin 243). The resins are semiflexible, have good adhesion and impact resistance, and are rated for continuous use up to 130°C. They are commonly used for applications like motor encapsulation and transformer potting. The document provides details on the resins' properties, testing methods, usage instructions, safety precautions, and graphs of viscosity and resistivity over time and temperature.
LOCTITE 420 INSTANT ADHESIVE is a general purpose cyanoacrylate wicking type plastic bonder. Mil Spec: Mil-A-46050C Type II Class I. Commercial Item Description A-A-3097: Type II Class 1.
The DOW FILMTECTM BW30-400 membrane element offers consistent, high-performance reverse osmosis for water treatment. It delivers high quality permeate water while minimizing costs. The element has a wide cleaning pH range and robustness due to its polyamide thin-film composite membrane. It has a high permeate flow rate of 10,500 gallons per day and salt rejection of 99.5% under standard test conditions. The two-page document provides specifications, operating limits, and additional information for using the membrane element.
This document provides information on the properties and applications of 3M Scotchcast Electrical Resin 235, a two-part epoxy resin. It has a low viscosity and cures at temperatures as low as 75°C, making it suitable for impregnating coils and castings. Key properties include a tensile strength of 1300 psi, elongation of 75%, and thermal conductivity of 4.0x10-4. It passes thermal and mechanical shock tests and absorbs minimal moisture. The document provides instructions for mixing, degassing, casting, and curing the resin and lists its storage conditions.
The document summarizes Scotchcast resin joint kits that are designed for insulating and protecting mechanical joints of low voltage energy cables. The kits contain a transparent mould body, Scotchcast 40G resin in a two-chamber bag, foam seals, spacers, and instructions. The kits can be used for indoor, outdoor, underground and submerged applications up to 6kV. The document provides product selection guidelines and test results showing the kits pass insulation and voltage withstand standards.
The document describes 3M Scotchcast resin joint kits 92-NA-x-U, which are designed for joining low voltage energy cables in hazardous areas. The kits provide electrical insulation and mechanical protection of cable joints using a flame retardant and chemical resistant resin. The kits contain a transparent mould body, resin bags with a closed mix system, spacers, tapes, gloves, and instructions. The resin provides insulation for indoor and outdoor applications, including underground and submerged joints.
The document describes 3M Scotchcast resin joint kits 92-NA-x-U, which are designed for joining low voltage energy cables in hazardous areas. The kits provide electrical insulation and mechanical protection of cable joints using a flame retardant and chemical resistant resin. The kits contain a transparent mould body, resin bags with a closed mix system, spacers, tapes, gloves, and instructions. The resin provides insulation for indoor and outdoor applications, including underground and submerged joints.
3M Scotchcast Branch LV Low Voltage Cable Joints - Hazardous Area (Zones 1 & 2)Thorne & Derrick UK
The document describes a 3M Scotchcast resin kit for electrical cable joints. The kit contains transparent mould shelves, Scotchcast 40G resin in a two-chamber bag, pre-cut sealing elements, and instructions. The resin provides electrical insulation and mechanical protection for cable joints. It has passed testing for voltage withstand, insulation resistance, and heat cycles when used indoors, outdoors, underground, and submerged. The resin packaging includes a closed mixing and pouring system to apply the resin without direct contact.
3M Scotchcast Branch LV Low Voltage Cable Joints - High Humidity & Cathodic P...Thorne & Derrick UK
The document describes a 3M Scotchcast resin kit for electrical cable joints. The kit contains transparent mould shelves, Scotchcast 40G resin in a two-chamber bag, pre-cut sealing elements, and instructions. The resin provides electrical insulation and mechanical protection for cable joints. It has passed testing for voltage withstand, insulation resistance, and heat cycles when used indoors, outdoors, underground, and submerged. The resin packaging includes a closed mixing and pouring system to apply the resin without direct contact.
This document provides information on Carbothane 133 HB, an aliphatic acrylic-polyester polyurethane coating. It has excellent resistance to corrosion, chemicals and abrasion. It can be applied by spray, brush or roller and provides very good weathering performance in a broad range of colors. The document outlines the product features, specifications, surface preparation requirements, application details, performance test results and curing times.
LOCTITE 270 MOD is a one-part, acrylic-based threadlocking adhesive that cures anaerobically. It is green liquid that is particularly suitable for permanently locking and sealing threaded fasteners in heavy-duty applications. The adhesive cures when confined in the absence of air between close-fitting metal surfaces. It provides high strength bonding and prevents loosening from shock and vibration. The technical data sheet provides information on the product's properties, curing performance under different conditions, typical performance of cured material, and environmental resistance.
LOCTITE 401 is a one-part cyanoacrylate adhesive that cures rapidly when exposed to moisture in the air. It bonds a variety of materials including wood, paper, leather, fabric, plastics and metals. The adhesive has a low viscosity, cures within seconds to minutes depending on the substrate, and reaches full strength within 24 hours. It is particularly suited for bonding porous materials.
Scotchcast resin joint kits are designed for insulating and protecting cable joints for low voltage energy cables with 1 to 5 cores. The kits contain a translucent mould body, Scotchcast 470W resin in a two-chamber bag, pre-cut sealing elements, and instructions. The resin is delivered using a closed mixing and pouring system to apply it within the mould body without direct contact. Testing shows the kits pass insulation and durability standards for indoor, outdoor, underground, and submerged applications.
Scotchcast resin joint kits are designed for insulating and protecting cable joints for low voltage energy cables with 1 to 5 cores. The kits contain a translucent mould body, Scotchcast 470W resin in a two-chamber bag, pre-cut sealing elements, and instructions. The resin is delivered using a closed mixing and pouring system to apply it within the mould body without direct contact. Testing shows the kits pass insulation and durability standards for indoor, outdoor, underground, and submerged applications.
1. 3
3M™ Gas Well Stimulant
WS-1200
Product Information
Introduction and Use
3M™ Gas Well Stimulant WS-1200 is a fluorinated material used
to mitigate condensate and/or water blockages in sandstone
natural gas wells. The material is used to alter the wettability of
a sandstone matrix or a silica based proppant pack. This allows
water and/or condensate to flow more freely through the well
matrix or the proppant pack, thus increasing the well’s production.
Typical Physical Properties (Not for specification purposes.)
Properties Typical Values
Appearance Slightly hazy/clear, yellow viscous liquid
Specific Gravity (g/cc) 1.14
Solubility in Water Dispersible in all proportions
Flash Point (Setaflash closed cup) 180°F (82°C)
Vapor Pressure 0.0014 psi (0.07 mm Hg)
pH (of 1% aqueous solution) 4.5
Viscosity (cP @ 25°C / 77°F) 2,000-6,000
Tg <0°C
Chemical Type Non-ionic
Composition
90% polymeric fluorochemical actives
8% non-fluorochemical actives
2% co-solvent (dipropylene glycol
monomethylether, toluene)
Freeze/Thaw Stability Protect from freezing*
* If Gas Well Stimulant WS-1200 freezes, warm it to 86°F (30°C) until fluid. Freezing will not
change physical properties or adversely affect performance.
WS-1200 Technology Overview
Over time, nearly all natural gas wells reach a point where flow
rates are reduced due to the accumulation of condensate, oil and/
or water blockage. WS-1200 is non-reactive but interacts with the
substrate by attaching itself via polar bonding under reservoir
conditions. Figure 1 schematically represents the attachment of
WS-1200 to a siliceous surface. The fluorinated portion of the
active ingredient orients outward in a monolayer attachment and
therefore does not constrict pores. This changes the wettability
of the substrate’s surface, minimizing capillary pressure and
mitigating residual saturations of water and hydrocarbon. This
increases the relative permeability of the gas and condensate.
F
FCF
FCF
SiO2
FCF
Figure 1. Active Attachment
Lab and Field Results
Laboratory core flood data using WS-1200 in sandstone cores
show improvement factors for gas permeability of 1.5x to 3x,
with no core damage. Field trials demonstrated improvements
averaging 1.5x at six months following treatment and no wells
were shut down due to the use of WS-1200 during those trials. All
wells exhibited a change in rock wettability via improved gas flow
and/or increased flow stability.
Solvent-only treatments will clear the well matrix or proppant
pack, but not change the surface wettability. Hence, the water
and/or condensate blockage begins re-forming immediately
following a solvent treatment. The duration of the wettability
change using WS-1200 has consistently exceeded one year in
observed field trials. All wells where data were taken for two years
showed wettability modification to two years. The use of WS-1200
in a solvent blend can be viewed as a durable solvent treatment.
Blending and Use
WS-1200 is added to a solvent blend which the user has deemed
suitable for the well. Recommended solvents include materials that
are water and condensate soluble, such as alcohols and/or glycol
ethers. However, the choice of solvent is dependent on the well
conditions and the solvent blend containing the WS-1200 should
be tested for compatibility with the well fluids before deployment
into the well. The solvent carries nominally 2 weight percent WS-
1200 into the well matrix or fracture. The solvent portion dissolves