Wapilindo Perdana, Ltd. has been an authorized distributor of Plexco-Chevron polyethylene pipes in Indonesia and Southeast Asia since 1990. As a distributor, it provides warranty services, after sales support, heat fusion training, equipment rental, and design advice to customers. It aims to ensure customers receive high quality pipes and installation support. Wapilindo Perdana's authorization allows it to fully stand behind the Plexco products and installation quality.
This document is an internship report submitted by Muhammad Ashraf summarizing his internship at PAK-ARAB REFINERY LIMITED (PARCO). The 6-week internship provided hands-on experience in PARCO's utilities department, which is crucial for providing steam, air, water, and other utilities to refinery operations. Key areas covered in the internship included HSE training, the chemical handling unit, and the plant and instrument air unit. The internship helped Ashraf gain practical knowledge to supplement his engineering coursework and better understand refinery processes.
The document summarizes a chilled water piping project for the 60-room Coronado Bay Hotel in Panama using Thermaflex Flexalen piping products. Over 400 meters of Flexalen 60 and 360 meters of Flexalen 600 single pipe were installed for the indoor chilled water system, which also used Thermasmart insulation. Installation of the Flexalen piping was much faster than estimated steel piping installation, taking only 1 day per floor instead of the planned 1 week. Installers found the Flexalen system easy to install and weld. The flexibility of the piping allowed for savings in couplings and labor.
Công ty TNHH Kỹ Thuật Gas Phúc Sang Minh chuyên thiết kế, cung cấp, thi công hệ thống gas trung tâm, gas công nghiệp và là nhà phân phối chính thức thiết bị đồng hồ đo lưu lượng, van giảm áp, đầu báo dò gas.
http://www.jpsgas.com.vn/
Acrow Plast manufactures, supplies, exports, and wholesales a wide range of FRP piping, storage tanks, and agitators. They also provide pipe line installation services and water treatment plant services. The company was established in 1978 and offers industrial pipes, pipe fittings and valves, pipes and sheets, piping systems, storage tanks, and installation services. Acrow Plast prides itself on its client-centric approach and quality products.
Deepak Kumar is seeking a job relevant to his qualifications in plastic technology and production engineering. He has 8 years of experience working in plastic pipe manufacturing companies in roles related to production, quality assurance, and process improvement. He holds a diploma in plastic technology and is currently employed as a production engineer at Flotek Pipes & Irrigation Ltd. in Botswana.
AIRnet is a complete compressed air piping system consisting of high quality aluminum pipes and fittings. It provides a total solution that reduces installation time and costs through its lightweight pipes and quick-assembly fittings. AIRnet's benefits include corrosion resistance, low pressure drops, minimized leakages, and a 10-year warranty. It offers advantages over other piping materials like galvanized steel that are prone to corrosion, and PVC that can explode from temperature changes. AIRnet installations are faster than competitors' systems and beat them on total cost.
PharmaChem Engineering Services is an engineering company specializing in equipment supply and energy recovery systems for the chemical and pharmaceutical industries. They provide process engineering services including designing, fabricating, installing, and commissioning various types of process equipment. Their team has over 20 years of experience in projects engineering, process engineering, and energy recovery. They work with clients to understand their needs and provide customized solutions and services.
Deepak Kumar is seeking a job relevant to his qualifications and experience in plastics production and quality management. He has 8 years of experience as a Production Manager and Quality Engineer for companies that manufacture plastic pipes. Deepak has a diploma in Plastic Technology and is currently working as a Production Manager for a company that manufactures PVC and HDPE pipes in Botswana. He is looking to showcase his skills and abilities for a prestigious organization.
This document is an internship report submitted by Muhammad Ashraf summarizing his internship at PAK-ARAB REFINERY LIMITED (PARCO). The 6-week internship provided hands-on experience in PARCO's utilities department, which is crucial for providing steam, air, water, and other utilities to refinery operations. Key areas covered in the internship included HSE training, the chemical handling unit, and the plant and instrument air unit. The internship helped Ashraf gain practical knowledge to supplement his engineering coursework and better understand refinery processes.
The document summarizes a chilled water piping project for the 60-room Coronado Bay Hotel in Panama using Thermaflex Flexalen piping products. Over 400 meters of Flexalen 60 and 360 meters of Flexalen 600 single pipe were installed for the indoor chilled water system, which also used Thermasmart insulation. Installation of the Flexalen piping was much faster than estimated steel piping installation, taking only 1 day per floor instead of the planned 1 week. Installers found the Flexalen system easy to install and weld. The flexibility of the piping allowed for savings in couplings and labor.
Công ty TNHH Kỹ Thuật Gas Phúc Sang Minh chuyên thiết kế, cung cấp, thi công hệ thống gas trung tâm, gas công nghiệp và là nhà phân phối chính thức thiết bị đồng hồ đo lưu lượng, van giảm áp, đầu báo dò gas.
http://www.jpsgas.com.vn/
Acrow Plast manufactures, supplies, exports, and wholesales a wide range of FRP piping, storage tanks, and agitators. They also provide pipe line installation services and water treatment plant services. The company was established in 1978 and offers industrial pipes, pipe fittings and valves, pipes and sheets, piping systems, storage tanks, and installation services. Acrow Plast prides itself on its client-centric approach and quality products.
Deepak Kumar is seeking a job relevant to his qualifications in plastic technology and production engineering. He has 8 years of experience working in plastic pipe manufacturing companies in roles related to production, quality assurance, and process improvement. He holds a diploma in plastic technology and is currently employed as a production engineer at Flotek Pipes & Irrigation Ltd. in Botswana.
AIRnet is a complete compressed air piping system consisting of high quality aluminum pipes and fittings. It provides a total solution that reduces installation time and costs through its lightweight pipes and quick-assembly fittings. AIRnet's benefits include corrosion resistance, low pressure drops, minimized leakages, and a 10-year warranty. It offers advantages over other piping materials like galvanized steel that are prone to corrosion, and PVC that can explode from temperature changes. AIRnet installations are faster than competitors' systems and beat them on total cost.
PharmaChem Engineering Services is an engineering company specializing in equipment supply and energy recovery systems for the chemical and pharmaceutical industries. They provide process engineering services including designing, fabricating, installing, and commissioning various types of process equipment. Their team has over 20 years of experience in projects engineering, process engineering, and energy recovery. They work with clients to understand their needs and provide customized solutions and services.
Deepak Kumar is seeking a job relevant to his qualifications and experience in plastics production and quality management. He has 8 years of experience as a Production Manager and Quality Engineer for companies that manufacture plastic pipes. Deepak has a diploma in Plastic Technology and is currently working as a Production Manager for a company that manufactures PVC and HDPE pipes in Botswana. He is looking to showcase his skills and abilities for a prestigious organization.
PTT Exploration and Production Public Company Limited (PTTEP) needed to replace three valves on a gas export pipeline connecting the Bongkot and Erawan Production Platforms in the Gulf of Thailand. To do so safely without disrupting gas flows, PTTEP partnered with T.D. Williamson (TDW) to use their SmartPlug pressure isolation technology. TDW isolated a 40 meter section of the pipeline and replaced the valves over a 10 day period. Hydrotests confirmed the integrity of the repairs, and gas flows resumed without a major disruption to production. The project was completed safely and on schedule due to close cooperation between PTTEP and TDW.
COUPLING SYSTEM Quick and Easy Assembly Polypropylene fasteners combine the two main advantages of mechanical fastening systems. Push-fit and clamping: the push-fit process makes it easy to install.
This document provides information on various duct sealing systems from Filoform. It describes 4 different duct sealing systems - MDI, MDII, MDIII, and MDIV. Each system is designed for sealing ducts containing cables/pipes and comes in kits for different duct diameters. The kits contain molds and resin that expand to seal the ducts in a gas and water tight manner. The document also discusses FiloSeal+ and FiloSeal+HD universal re-enterable duct sealing systems, which allow adding/removing cables and provide strong backing for sealant. FiloSeal+HD FIRE provides a fire resistant version up to 4 hours.
Colin Selfe has over 30 years of experience in electronics, including designing and repairing systems to the component level. He has worked as an ROV pilot and supervisor for over 10 years, logging over 1000 hours flying ROVs. Some of his recent projects in these roles include riser replacement, FPSO inspections, and pipeline inspections. He has extensive skills with Seaeye ROVs and experience designing pneumatic, hydraulic, and software systems.
The document provides an overview of The Technical Group Co., which was founded in 1994 to work in fields including petrochemicals, oil, gas, electricity, water, and civil works. It discusses the company's management structure, staff, equipment, scope of work covering infrastructure, maintenance services, and more. The document also outlines the company's marketing strategies, engine experience including overhauling gas turbines, and general safety procedures followed during projects.
Damon Hughes has over 14 years of experience working for Aker MH/MWIRTH as a senior service engineer. He has expertise in software control systems, electrical control, instrumentation, and mechanical and hydraulic systems. Hughes has led projects as an E&I lead engineer and provided training, commissioning, and support on offshore rigs. He is a reliable, hardworking employee with a track record of flexibility and commitment to his employer.
HAM Electro Mechanical Engineering Co. Ltd is a Sudanese company established in 2008 that provides electro-mechanical services to petroleum, power, industrial, and building projects. It has 29 personnel and is headquartered in Khartoum. The company aims to be a leading provider of electro-mechanical solutions in Africa and the Middle East. It offers services including software, fuel dispensers, pipes, fittings, and maintenance for various industries. HAM has ongoing contracts with companies like Petronas and Oilibya to maintain their fuel stations and provides other electro-mechanical works for customers such as food and building projects.
Australian Poly Solutions specializes in high density polyethylene (HDPE) pipe fusion services for rural, commercial, marine, and industrial applications throughout Victoria, South Australia, and Tasmania. They provide a total solution for pipe fusion projects, with qualified staff certified in HDPE fusion and safety. Their equipment includes a self-propelled McElroy fusion machine that can handle difficult sites. They implement quality assurance measures like data logging of welds, independent tensile testing, and hydrostatic field testing.
The curriculum vitae outlines Mai Van Binh's experience as a mechanical design engineer and project engineer at GE Oil & Gas from 2013 to 2016, and previously as a mechanical engineer at PetroVietnam Marine Shipyard from 2008 to 2013. It details his responsibilities, qualifications, projects worked on, and education in mechanical engineering from Hanoi University of Mining & Geology. The CV shows over 8 years of experience in the oil and gas industry focusing on design, installation, and project management of mechanical equipment.
Mohammad Tarique is applying for the position of Plumbing Supervisor with over 19 years of experience in plumbing. He has worked as a Plumbing Foreman for several companies in Dubai, Saudi Arabia, and other countries since 1993. Tarique has a Diploma in Mechanical Engineering and Plumbing & Sanitation qualifications. He is responsible for plumbing installation, preparing drawings and schedules, safety standards, and working with materials like copper, PVC, fire systems, and drainage systems.
Central industries national pvc krypton electrical profileLalith Dias
Central Industries PLC manufactures construction-related products that are certified to local and international quality standards. Their flagship brands include National PVC and Krypton, which produce pipes, fittings, and other products for plumbing, drainage, electrical, and cable management applications. The company aims to be the preferred choice in the construction industry by offering trusted products that meet stringent quality and safety standards.
Ajithkumar has over 12 years of experience in procurement and material management. He is currently working as a procurement manager for Bahwan Engineering Company LLC in Oman, where he is responsible for procuring equipment and services for desalination plants. Previously, he has worked on other engineering projects in Oman and India, handling procurement for HVAC, electrical, and plumbing packages. He has a bachelor's degree in mechanical engineering and is pursuing a postgraduate diploma in business management.
Ajithkumar has over 12 years of experience in procurement and material management. He is currently working as a procurement manager for Bahwan Engineering Company LLC in Oman, where he is responsible for procuring equipment and services for water projects worth over $180 million. Previously, he has worked on other large projects in Oman and India, handling procurement for HVAC, electrical, and other equipment. He has a bachelor's degree in mechanical engineering and is pursuing a postgraduate diploma in business management.
The Project Support Services division of Trouvay & Cauvin Group provides one-stop material, equipment and service packages for challenging construction projects in difficult regions. They helped a client with three challenges on an LNG project in Qatar by fast-tracking critical fittings, providing a reusable water tank, and installing mobile fencing to protect materials.
PT. WEELIM INDO PERKASA is an ISO 9001 certified company located in Batam, Indonesia that has been in business since 2002. They focus on trading, general supply, and manufacturing accessories for the OCTG and marine industries. Their vision is to be a reliable business partner for OCTG and general supply needs. They produce and supply a wide range of oilfield and marine products including protectors, inserts, pumps, hardware, and genuine replacement parts. Customer satisfaction is their top priority.
Polyspray SA provides polyurea coating solutions and technical assistance to clients. Polyurea is a fast-curing coating derived from reacting a polyisocyanate with an amine resin. It provides excellent waterproofing, UV protection, adhesion, strength, and resistance to abrasion, chemicals, and heat. Polyurea is suitable for corrosion protection, pipe coatings, joint seals, tank linings, marine applications, roof coatings, manhole linings, and fuel containment due to its benefits of fast cure time, durability, chemical resistance, and cost effectiveness.
In today's industrial landscape, sealing solutions are vital for ensuring efficient and reliable operations across industries. One such solution that has gained immense popularity is the PTFE gasket. PTFE, or polytetrafluoroethylene, is a remarkable material known for its exceptional properties, making it an ideal choice for sealing applications.
Trustin Pipe Brochure designed by Balikpapandesign.comMuhammad Iwan
This document discusses HDPE pipe produced by Eurapipe Indonesia for water, process, industrial, and mining applications. It provides information on:
- Eurapipe Indonesia's production of HDPE pipe from 15mm to 1000mm diameter for transmission and distribution applications.
- Jointing methods for HDPE pipe including butt welding, electrofusion, flanges, and mechanical couplings.
- Applications of HDPE pipe in water/wastewater infrastructure, mining/mineral processing, and industrial uses.
- Advantages of HDPE pipe including corrosion resistance, flexibility, impact resistance, smooth bore, and lightweight.
This document contains the resume of Somkiat Cherdsantia, summarizing his 18 years of experience as a piping engineer for oil, gas, chemical and petrochemical projects. It details his current role as a senior piping engineer at Technip Engineering (Thailand) Ltd, along with descriptions of specific projects, responsibilities, and previous engineering roles from 1999 to present.
TAP has organized it’s manufacturing facilities in away that is friendly to the environment and surround communities. To maintain the position at the forefront of the PE pipe industry, TAP is committed to continuous product development, employing the latest technology in is manufacturing process. TAP has been producing HDPE pipes and fittings since 1984 and has established itself as a pioneer and leading producer through continuous innovation and a commitment to quality.
PTT Exploration and Production Public Company Limited (PTTEP) needed to replace three valves on a gas export pipeline connecting the Bongkot and Erawan Production Platforms in the Gulf of Thailand. To do so safely without disrupting gas flows, PTTEP partnered with T.D. Williamson (TDW) to use their SmartPlug pressure isolation technology. TDW isolated a 40 meter section of the pipeline and replaced the valves over a 10 day period. Hydrotests confirmed the integrity of the repairs, and gas flows resumed without a major disruption to production. The project was completed safely and on schedule due to close cooperation between PTTEP and TDW.
COUPLING SYSTEM Quick and Easy Assembly Polypropylene fasteners combine the two main advantages of mechanical fastening systems. Push-fit and clamping: the push-fit process makes it easy to install.
This document provides information on various duct sealing systems from Filoform. It describes 4 different duct sealing systems - MDI, MDII, MDIII, and MDIV. Each system is designed for sealing ducts containing cables/pipes and comes in kits for different duct diameters. The kits contain molds and resin that expand to seal the ducts in a gas and water tight manner. The document also discusses FiloSeal+ and FiloSeal+HD universal re-enterable duct sealing systems, which allow adding/removing cables and provide strong backing for sealant. FiloSeal+HD FIRE provides a fire resistant version up to 4 hours.
Colin Selfe has over 30 years of experience in electronics, including designing and repairing systems to the component level. He has worked as an ROV pilot and supervisor for over 10 years, logging over 1000 hours flying ROVs. Some of his recent projects in these roles include riser replacement, FPSO inspections, and pipeline inspections. He has extensive skills with Seaeye ROVs and experience designing pneumatic, hydraulic, and software systems.
The document provides an overview of The Technical Group Co., which was founded in 1994 to work in fields including petrochemicals, oil, gas, electricity, water, and civil works. It discusses the company's management structure, staff, equipment, scope of work covering infrastructure, maintenance services, and more. The document also outlines the company's marketing strategies, engine experience including overhauling gas turbines, and general safety procedures followed during projects.
Damon Hughes has over 14 years of experience working for Aker MH/MWIRTH as a senior service engineer. He has expertise in software control systems, electrical control, instrumentation, and mechanical and hydraulic systems. Hughes has led projects as an E&I lead engineer and provided training, commissioning, and support on offshore rigs. He is a reliable, hardworking employee with a track record of flexibility and commitment to his employer.
HAM Electro Mechanical Engineering Co. Ltd is a Sudanese company established in 2008 that provides electro-mechanical services to petroleum, power, industrial, and building projects. It has 29 personnel and is headquartered in Khartoum. The company aims to be a leading provider of electro-mechanical solutions in Africa and the Middle East. It offers services including software, fuel dispensers, pipes, fittings, and maintenance for various industries. HAM has ongoing contracts with companies like Petronas and Oilibya to maintain their fuel stations and provides other electro-mechanical works for customers such as food and building projects.
Australian Poly Solutions specializes in high density polyethylene (HDPE) pipe fusion services for rural, commercial, marine, and industrial applications throughout Victoria, South Australia, and Tasmania. They provide a total solution for pipe fusion projects, with qualified staff certified in HDPE fusion and safety. Their equipment includes a self-propelled McElroy fusion machine that can handle difficult sites. They implement quality assurance measures like data logging of welds, independent tensile testing, and hydrostatic field testing.
The curriculum vitae outlines Mai Van Binh's experience as a mechanical design engineer and project engineer at GE Oil & Gas from 2013 to 2016, and previously as a mechanical engineer at PetroVietnam Marine Shipyard from 2008 to 2013. It details his responsibilities, qualifications, projects worked on, and education in mechanical engineering from Hanoi University of Mining & Geology. The CV shows over 8 years of experience in the oil and gas industry focusing on design, installation, and project management of mechanical equipment.
Mohammad Tarique is applying for the position of Plumbing Supervisor with over 19 years of experience in plumbing. He has worked as a Plumbing Foreman for several companies in Dubai, Saudi Arabia, and other countries since 1993. Tarique has a Diploma in Mechanical Engineering and Plumbing & Sanitation qualifications. He is responsible for plumbing installation, preparing drawings and schedules, safety standards, and working with materials like copper, PVC, fire systems, and drainage systems.
Central industries national pvc krypton electrical profileLalith Dias
Central Industries PLC manufactures construction-related products that are certified to local and international quality standards. Their flagship brands include National PVC and Krypton, which produce pipes, fittings, and other products for plumbing, drainage, electrical, and cable management applications. The company aims to be the preferred choice in the construction industry by offering trusted products that meet stringent quality and safety standards.
Ajithkumar has over 12 years of experience in procurement and material management. He is currently working as a procurement manager for Bahwan Engineering Company LLC in Oman, where he is responsible for procuring equipment and services for desalination plants. Previously, he has worked on other engineering projects in Oman and India, handling procurement for HVAC, electrical, and plumbing packages. He has a bachelor's degree in mechanical engineering and is pursuing a postgraduate diploma in business management.
Ajithkumar has over 12 years of experience in procurement and material management. He is currently working as a procurement manager for Bahwan Engineering Company LLC in Oman, where he is responsible for procuring equipment and services for water projects worth over $180 million. Previously, he has worked on other large projects in Oman and India, handling procurement for HVAC, electrical, and other equipment. He has a bachelor's degree in mechanical engineering and is pursuing a postgraduate diploma in business management.
The Project Support Services division of Trouvay & Cauvin Group provides one-stop material, equipment and service packages for challenging construction projects in difficult regions. They helped a client with three challenges on an LNG project in Qatar by fast-tracking critical fittings, providing a reusable water tank, and installing mobile fencing to protect materials.
PT. WEELIM INDO PERKASA is an ISO 9001 certified company located in Batam, Indonesia that has been in business since 2002. They focus on trading, general supply, and manufacturing accessories for the OCTG and marine industries. Their vision is to be a reliable business partner for OCTG and general supply needs. They produce and supply a wide range of oilfield and marine products including protectors, inserts, pumps, hardware, and genuine replacement parts. Customer satisfaction is their top priority.
Polyspray SA provides polyurea coating solutions and technical assistance to clients. Polyurea is a fast-curing coating derived from reacting a polyisocyanate with an amine resin. It provides excellent waterproofing, UV protection, adhesion, strength, and resistance to abrasion, chemicals, and heat. Polyurea is suitable for corrosion protection, pipe coatings, joint seals, tank linings, marine applications, roof coatings, manhole linings, and fuel containment due to its benefits of fast cure time, durability, chemical resistance, and cost effectiveness.
In today's industrial landscape, sealing solutions are vital for ensuring efficient and reliable operations across industries. One such solution that has gained immense popularity is the PTFE gasket. PTFE, or polytetrafluoroethylene, is a remarkable material known for its exceptional properties, making it an ideal choice for sealing applications.
Trustin Pipe Brochure designed by Balikpapandesign.comMuhammad Iwan
This document discusses HDPE pipe produced by Eurapipe Indonesia for water, process, industrial, and mining applications. It provides information on:
- Eurapipe Indonesia's production of HDPE pipe from 15mm to 1000mm diameter for transmission and distribution applications.
- Jointing methods for HDPE pipe including butt welding, electrofusion, flanges, and mechanical couplings.
- Applications of HDPE pipe in water/wastewater infrastructure, mining/mineral processing, and industrial uses.
- Advantages of HDPE pipe including corrosion resistance, flexibility, impact resistance, smooth bore, and lightweight.
This document contains the resume of Somkiat Cherdsantia, summarizing his 18 years of experience as a piping engineer for oil, gas, chemical and petrochemical projects. It details his current role as a senior piping engineer at Technip Engineering (Thailand) Ltd, along with descriptions of specific projects, responsibilities, and previous engineering roles from 1999 to present.
TAP has organized it’s manufacturing facilities in away that is friendly to the environment and surround communities. To maintain the position at the forefront of the PE pipe industry, TAP is committed to continuous product development, employing the latest technology in is manufacturing process. TAP has been producing HDPE pipes and fittings since 1984 and has established itself as a pioneer and leading producer through continuous innovation and a commitment to quality.
1. WAPILINDO PERDANA, Ltd.
Authorized Distributor
POLYETHYLENE HIGH DENSTY PIPE 3408EHMW PLEXO - CHEVRON
Wapilindo Perdana, Ltd. has been appointed as an Authorized Distributor by
Plexco-Chevro, USA, since 1990. Plexco entrusted Authorized Distributor not
only by pointing, but of course with selectivity and full caution and seriousness
since Wapilindo Perdana, Ltd. has been involved and experienced in pipe field
long enough.
Coverage as an Authorized Distributor is not only trusted for all of Indonesia
alone but also include Southeast Asia region. Of course, this trust is a great
honor, especially for Wapilindo Perdana, Ltd. and in general to Indonesian
people who have been trusted by a USA giant company, namely Chevron.
This honor is the basis for Wapilindo Perdana, Ltd. to provide maximum services
for the consumers of HDPE Plexco pipe which includes warranty service,
excellent after sales, Heat Fusion operator training, provision of joint machine
equipment and advisory services of HDPE piping istallation design.
A. Warranty service
Warranty services provided by Wapilindo Perdana, Ltd. as Authorized Distributor
HDPE 3408EHMW pipe of Plexco, are:
1. Provide guarantees for pipeline that will and have been used by the user for 5
(five) years, if Plexco HDPE 3408 EHMW pipe installed are broken or leak
due to the pipeline technical specifications that do not meet the
2. requirements/standards set, pipeline damage is not caused by intentional factor
(contact with digger hoe, sawed, drilled, and others). Wapilindo Perdana, Ltd. will
replace a broken or leaking pipe with a good pipe in the location, with no extra
charges/free.
2. In there is leaks in the heat fusion connection, then Wapilindo Perdana, Ltd.
will fix the connection with no connection fee charge as soon as possible.
3. If the installed pipe is damaged, cracked or leaked because of human factors,
Wapilindo Perdana, Ltd. can fix it as soon as possible.
B. After Sale Service
Wapilindo Perdana, Ltd. provide free after sale service in the piping system of
Plexco HDPE 3408 EHMW, so that consumers who have used and will use the
Plexco product get assurance when something happens in the piping system.
This service includes pipe and fitting materials ranging from the smallest diameter
to the largest diameter. For pipe accessories beyond Plexco products, also
provided in accordance with the specifications ordered and compatible with the
pipe material.
C. Heat Fusion Joint Operator Training.
Wapilindo Perdana, Ltd. as Authorized Distributor of Plexco HDPE 3408 EHMW
pipe and fusion machine with McElory brands of USA , has been granted full trust
and authority by the principal above, to provide training and courses of Plexco
HDPE 3408 EHMW pipe connecting and courses of McElory fusion engine
maintenance.
3. The training will not consume a lot of time, depends on the fusion machine
and and the connection systems used, the longest training time is + 6 (six) days.
With relatively short time it is expected that the operators in the training
become skilled and reliable operators in heat fusion system connecting.
When the trained operator perfom bad connection work or there is a problem in
the work, Wapilindo Perdana, Ltd. Will take responsibility and will provide
technical assitance during the connection work.
The point is that Wapilindo Perdana, Ltd. Will provide training and courses
services for heat fusion joint operators, and take full responsibility if the trained
operator face any difficulties in their work.
D. Provision of joint machine tools
Wapilindo Perdana, Ltd. not only trusted as an Authorized Distributor of HDPE
pipe with Plexco brands, but also trusted as an Authorized Distributor fusion
machines with McElroy brands. McElroy fusion machine is perfect and has been
a partner of the Plexco HDPE pipe for a very long time in the terms of connecting
pipes, and McElroy has had experiences in producing as well as develop new
technology of fusion machine.
McElroy machine is not complicated to be operated, very accurate, has long life
service and the materials are all made of selected steel, and can be used by the
polyethylene pipeline of other brands .
For more information:
1. Fusion Machines are available in metric diameter.
2. After sales service and engine service will be performed by Wapilindo
Perdana, Ltd.
4. 3. Consumers should purchase the in order system
4. For operator training and 1 (one) year warranty service has been included in
the machine price offered.
5. How the purchase can be discussed further with Wapilindo Perdana, Ltd.
Other than purchasing way, the consumer can use the fusion machine equipment
as follows:
1. Rent the machines: users can rent a machine that will be used from
Wapilindo Perdana, Ltd. in daily basis, the rental charge should be payed
when the engine is out of the storage warehouse of Wapilindo Perdana, Ltd,
rental feecost includes operator, fuel and transporting the machine to the
place.
2. The point of connection and fittings: the cost imposed on each point of pipe
connection or fitting, includes the cost of fuel and the operator but does not
include transportation to the place.
E. Advice Service of HDPE 3408 EHMW Pipe Installation
To help expedite the work of pipe system planning with HDPE 3408 EHMW,
Wapilindo Perdana, Ltd. can provide assistance services of HDPE 3408 EHMW
piping design without any additional charge. If in turns the plan is rather
complicated and must be carefully handling and consumer needs advice from an
expert in Plexco - USA, Wapilindo Perdana, Ltd. is able to provide
F. Plexco - Chevron Products that is marketed by Wapilindo Perdana, Ltd.
Polyethylene pipe produced by Plexco consists of
5. 1. High Density Polyethylene 3408 EHMW
2. Medium Debsity Polyethylene 2406
3. High Temperature Polyethylene
Piping system products with an internationally recognized stripe:
1. Bluestripe: For Potable Water (Dringking Water)
2. Redstripe : For firefighters pipelines & water
3. Greenstripe : For sewerage
4. Yellowstripe : For Gas distribution channels ( HDPE )
5. Black Pipe : For potable water, slurry and chemical
6. Yellow pipe : For Gas distribution channels ( MDPE )
7. Red Pipe : For Electric Duct
G. Plexco HDPE Product Standard
The resulting products have international standards, those are:
AWWA ( America Water Work Associantion )
ASTM ( American socienty for Testing & Materilas )
API (American Petroleum Institute socienty )
ANSI ( American National Standard )
CSA ( Canadian Standard Association )
PPI ( Plastic Pipe Institute )