This document provides installation, operation, and testing instructions for the Mindray VS900 and VS600 patient monitors. It includes descriptions of the monitors' user interfaces, functions such as non-invasive blood pressure monitoring and clinical scoring systems, data management and output capabilities, and maintenance procedures. Testing instructions are also provided to verify the accuracy of temperature measurements using resistance values corresponding to specific temperatures.

1. © 2019 Mindray Confidential
VS900/VS600 installation,operation
PM product Global Technical Support Department
Version: V3.0
Number: MJH-13010-VS900&VS600

2. © 2019 Mindray Confidential
2
 VS900/VS600 Introduction
 Installation
 Test

3. © 2019 Mindray Confidential
3
 VS900/VS600 Introduction
 Installation
 Test

4. © 2019 Mindray Confidential
4
VS-900
VS900
Spot check mode and Monitor mode
8.4 inch LED
MEWS、NEWS、NEWS2、Customizable Score
ADT/EMR
IPX1

5. © 2019 Mindray Confidential
5
VS600
VS-600
 Spot check Only
 5.3“HD LCD
 Up to 22hours battery running time
 W/O Net port, W/O Recorder
 IPX1

6. © 2019 Mindray Confidential
6
VS900 Configuration
No. SPO2 NIBP SmarTem
p
Touch
scree
n
Wifi Multi
-I/O
Recorder
1 Mindray √ √ √ √ √ √
2 Masimo √ √ √ √ √ √
3 Nellcor √ √ √ √ √ √
4 Mindray √ × × × × ×
5 Masimo √ × × × √ ×
6 Nellcor √ × × × × ×
7 Mindray × × × × × ×
8 × √ √ × × × ×
9 × √ × × × × ×

7. © 2019 Mindray Confidential
7
VS600 Configuration
No. SPO2 NIBP SmarTemp
1 Mindray √ √
2 Masimo √ √
3 Nellcor √ √
4 Mindray √ ×
5 Masimo √ ×
6 Nellcor √ ×
7 × √ √
8 × √ ×

8. © 2019 Mindray Confidential
8
Monitor mode VS Spot check mode
Functions Monitor Mode Spot check mode
Configure and use NIBP Interval √ ×
Configure and use NIBP Clock √ ×
Configure and use NIBP Simultaneous √ ×
Use STAT NIBP √ ×
Configure and use Sat-Seconds (Nellcor) √ ×
Access [Custom Program] tab (NIBP) √ ×
Access [Alarm Setup] tab √ ×
Access [Continuous Trends] tab √ ×
Access [Graphic Trends] tab √ ×

9. © 2019 Mindray Confidential
9
 VS900/VS600 Introduction
 Installation
 Accessories

10. © 2019 Mindray Confidential
10
VS-900 front view
1. Alarm indicator
2. Display screen
3. Temperature probe well
4. Probe cover pack holder
5. AC power indicator
6. Power ON/OFF switch
7. Battery indicator
8. Silence key
9. NIBP Start/Stop key
10.Admit patient key
11.Knob

11. © 2019 Mindray Confidential
11
Side view
1. Handle
2. Recorder indicator
3. Start/stop recording key
4. Paper outlet
5. Recorder door
6. Connector for NIBP cuff
7. Recorder latch
8. Connector for SpO2 cable

12. © 2019 Mindray Confidential
12
Rear view
1. Temperature probe well
2. Connector for temperature probe
3. Network connector
4. Multi-function connector
5. USB connector
6. AC power input
7. Equipotential grounding terminal

13. © 2019 Mindray Confidential
13
Bottom view
1. Battery compartment door
2. Hole for installing a support

14. © 2019 Mindray Confidential
14
VS-600 Front view
1. Display screen
2. AC power indicator
3. Power ON/OFF switch
4. Battery indicator
5. Clear key
6. Patient Category key
7. NIBP Start/Stop key
8. Probe cover pack holder
9. Temperature probe well
10.Handle

15. © 2019 Mindray Confidential
15
Side view
1. Connector for SpO2 cable
2. Connector for NIBP cuff

16. © 2019 Mindray Confidential
16
Bottom view
1. Battery compartment door
2. Hole for installing a support

17. © 2019 Mindray Confidential
17
Accessories-NIBP

18. © 2019 Mindray Confidential
18
Accessories-SPO2
Mindray
MASIMO
NELLCOR

19. © 2019 Mindray Confidential
19
Accessories-TEMP

20. © 2019 Mindray Confidential
20
Accessories-Barcode scanner(VS900)
1D Bar Code Scanners
Model:LS2208-SR
Manufacturer:Symbol
Supported code:code128，
codebar，UPC，EAN128，I2of5，
code93，
Code39
Connector:USB

21. © 2019 Mindray Confidential
21
VS-900 Mounting solutions
Trolley
Quick
lock
Wall bracket
Infusion stand
Bed side

22. © 2019 Mindray Confidential
22
VS-600 mounting solutions
Trolley
The quick lock structure

23. © 2019 Mindray Confidential
23
VS-900 UI
Three different UI
All Parameter Screen
Trend Screen
NIBP List Screen

24. © 2019 Mindray Confidential
24
1.Patient Information/System Message
Area
2.Alarm Information Area
3.Parameter and waveform area
4.Manual input area
5.Menu Quick Keys
6.Network and USB connection area
7.Battery statu
8. System time
9. Tabular trend area..
10.NIBP list area

25. © 2019 Mindray Confidential
25
Main

26. © 2019 Mindray Confidential
26

27. © 2019 Mindray Confidential
27
Alarm Setup

28. © 2019 Mindray Confidential
28

29. © 2019 Mindray Confidential
29
VS900 Data Output(Usb flash disk，Excel format)

30. © 2019 Mindray Confidential
30
Default configuration
 Adult
 Pediatric
 Neonate
Import/Export
configuration from USB
flash disk

31. © 2019 Mindray Confidential
31

32. © 2019 Mindray Confidential
32

33. © 2019 Mindray Confidential
33
VS-900 Operation
Key
Knob
Touch-screen

34. © 2019 Mindray Confidential
34
VS-900 admit patient
Quick admit
patient
Barcode
scanner
ADT server
Patient List

35. © 2019 Mindray Confidential
35
Manual Inputs
Saving the results and sending to EMR
Pain Level
LOC
RESP
I/O Fluid
Glucose
…..
VS900 manual inputs

36. © 2019 Mindray Confidential
36
VS-900 NIBP
Four modes:
Manual
Auto
STAT
Custom program
Custom program

37. © 2019 Mindray Confidential
37
Detailed function——VS-900
SpO2 Perfusion Index（PI)
Mindray’s Patent（ US7471970B2 ）
Masimo SET、Nellcor

38. © 2019 Mindray Confidential
38
VS-900 TEMP
Two work modes
Predict
Monitor
Three different positions
Oral
Axillary
Rectal

39. © 2019 Mindray Confidential
39
MEWS
MEWS (Modified Early Warning Score)
The MEWS calculates a total score and
provides a clinical response based on the
following five parameters:
Pulse Rate
Systolic NIBP
Respiration Rate
Temperature
AVPU (Alert, Reacting to Voice, Reacting
to Pain, and Unresponsive)
This scoring is only applicable to adult
patient.

40. © 2019 Mindray Confidential
40
NEWS (National Early Warning Score)/NEWS2
(National Early Warning Score2)
The NEWS or NEWS2 calculates a total score
and provides a clinical response based on the
following seven parameters:
Respiration Rate
SpO2
Supplemental Oxygen
Temperature
Systolic NIBP
Pulse Rate
AVPU
This scoring is only applicable to adult patient.
The main interface of scoring adds respiratory failure
parameters area.LOC-ACVPU a new choice
“confusion”, support for storage, review, recording
and network delivery. For more details please refer to
latest operation manual form TDP platform.

41. © 2019 Mindray Confidential
41
Customizable Scoring
The customizable scoring can provides a clinical response
based on the selected
multiple parameters or single parameter.
Multiple parameter scoring: calculate a total score and
provide a clinical response based on the multiple
parameters which are defined.
Individualparameter scoring (IPS): provide a clinical
response whenever any individual parameter value is out of
range.
The available parameters in customizable scoring include:
■ Respiration Rate
■ SpO2
■ Supplemental Oxygen
■ Temperature
■ Systolic NIBP
■ Diastolic NIBP
■ Mean NIBP
■ Pulse Rate
■ Level of Consiousness (either AVPU or GCS)
■ Blood Sugar
■ Urine Output
■ Catheter
■ Pain
■ Pain
■ Inspired O2%
■ Airway
■ Three customizable parameters

42. © 2019 Mindray Confidential
42
The IPS only calculates the parameter status. The IPS does not have total
score.
For other scorings, the total score will automatically be calculated when
each required parameter tile has a value. To calculate a score, follow this
procedure:
1. Start monitoring parameters. Their values are automatically obtained.
2. Manually input the values for the parameters that are not monitored.
3. For NEWS2, set the [SpO2 Scale].
◆ Scale 1: for patients without respiratory failure.
◆ Scale 2: for patients with a prescribed oxygen saturation requirement
of 88–92% (for example, in patients with hypercapnic respiratory failure).
Obtaining the Total Score

43. © 2019 Mindray Confidential
43
Mindray clinical scoring system config tool

44. © 2019 Mindray Confidential
44
Wifi or Cable
Hypervisor
Data Output
Usb
Perfect information network function
EMR
Patient
information
Egateway
Egateway
ADT Server
Patient
information
CMS version:06.08.00 or above
eGateway:4.1.0 or above

45. © 2019 Mindray Confidential
45
VS-900 data management
Up to 5000 historical data
Data merge for same patient
Data review with medical record
Screen with different conditions

46. © 2019 Mindray Confidential
46
Trend data editing, modifying and sending

47. © 2019 Mindray Confidential
47
VS-900 Real time and trend data recording

48. © 2019 Mindray Confidential
48
VS600 user interface
Measurement Mode
Press and hold ‘C’ for
above 2 seconds to
enter
Parameter Setup Mode
Start the monitor. Within
10 seconds after you
hear a beep, press and
hold hardkey ‘C’ to
enter.
Maintenance Mode

49. © 2019 Mindray Confidential
49
VS600 user interface
Parameter Setup
Mode
Press and hold ‘C’ for
above 2 seconds to
enter
Maintenance Mode Reboot
Measurement Mode

50. © 2019 Mindray Confidential
50
Measurement Mode

51. © 2019 Mindray Confidential
51
Parameter setup mode
Oral
Axillary
Rectal

52. © 2019 Mindray Confidential
52
Parameter setup mode
When PR parameter area displays
‘OFF’, it indicates that pulse tone is
switched off.
When PR parameter area displays
‘ON’, it indicates that pulse tone is
switched on.

53. © 2019 Mindray Confidential
53
Maintenance Mode

54. © 2019 Mindray Confidential
54
Maintenance Mode

55. © 2019 Mindray Confidential
55
Setting System Time

56. © 2019 Mindray Confidential
56
NIBP Leakage Test
If ‘F’ is dsplayed, it indicates that
the NIBP airway may have leakages.
If ‘P’ is displayed in the error code
area, it indicates the leakage test is
passed

57. © 2019 Mindray Confidential
57
NIBP Accuracy test

58. © 2019 Mindray Confidential
58

59. © 2019 Mindray Confidential
59
NIBP over pressure calibration
‘NIBP’ key:
Start NIBP cuff overpressure
calibration.
Software
overpressure
protection
Adult:
Pediatric:
Neonate:
297±3 mmHg
240±3 mmHg
147±3 mmHg

60. © 2019 Mindray Confidential
60
Software version

61. © 2019 Mindray Confidential
61
Spo2 version

62. © 2019 Mindray Confidential
62
Temp and PMB version

63. © 2019 Mindray Confidential
63
Default configuration
The default settings are:
NIBP unit: mmHg
Temp unit: ℃
Patient category: Adult
Beat sound: On
Temp position: oral
Brightness: 5

64. © 2019 Mindray Confidential
64
Working days
The system time area displays the
total working days of the monitor.
For example, “00 18” represents
that the monitor has totally worked
for 18 days

65. © 2019 Mindray Confidential
65
Screen Brightness
Brightness level

66. © 2019 Mindray Confidential
66
DIAP Communication Setup
Press hardkey ‘NIBP’ to toggle
between 9600 bps and 19200 bps.

67. © 2019 Mindray Confidential
67
Conditioning a Battery
To condition a battery, follow this procedure:
1. Disconnect the monitor from the patient and stop all monitoring or measuring.
2. Insert the battery in need of conditioning in the battery slot of the monitor.
3. Connect the monitor to AC power. Allow the battery to be charged uninterrupted
till the battery is full and the battery indicator is off.
4. Remove AC power and allow the monitor to run from the battery until it shuts off.
5. Again connect the monitor to AC power. Allow the battery to be charged
uninterruptedly till the battery is full and the battery indicator is off.

68. © 2019 Mindray Confidential
68
Cleaning and Disinfecting
Cleaning
Recommended cleaning agents are:
Sodium hypochlorite bleach (diluted)
Hydrogen peroxide (3%)
Ethanol (70%)
Isopropanol (70%)
Disinfecting
•The recommended disinfectants include:
Ethanol 70%,
Isopropanol 70%,
Perform® classic concentrate OXY.
• PS. Please refer to the operation manual for detail description(16.1.1 Cleaning)

69. © 2019 Mindray Confidential
69
 VS900/VS600 Introduction
 Installation
 Test

70. © 2019 Mindray Confidential
70
Tool required:
•Resistance box (with accuracy above 0.1 Ω)
1. Connet the Temperature probe to Monitor. Connect the two wires (orange wires) of
Temp probe connector to the two ends of the resistance box.
2. Set the resistance box to 9882.0 Ω (corresponding temperature is 25.3℃)
3. Verify displayed tempreture value on monitor is within 25.3±0.1℃.
4. Set the resistance box to 6037.1 Ω (corresponding temperature is 37.0℃).
5. Verify displayed tempreture value on monitor is within 37.0±0.1℃.
6. Set the resistance box to 4619.2 Ω (corresponding temperature is 43.7℃
7. Verify displayed tempreture value on monitor is within 43.7±0.1℃.
TEMP test

71. © 2019 Mindray Confidential
71
Version Information
Version
Number
Editor Date Description
1.0 Pang Bo 2013.7 VS900 service training materials
2.0 Liye Jia 2019.2.26 update

72. © 2019 Mindray Confidential
72
Review Information
Version
Number
Reviewed
by
Review Date Revision Details
1.0 Jinzhengyun 2013/11/9 Review Modifications
2.0 Dave Wang 2019.3.1 Optimized Structure Content
3.0

73. © 2019 Mindray Confidential
73
Thank you!