PROFESSIONAL SUMMARY
SKILLS
WORK HISTORY
VINCEL LEWIS
24500 PANAMA AVE., WARREN, MI 48091
H: 248-820-2907 | C: 586-945-4026 | vincellewis@yahoo.com
Maintenance Technician seeking employment with continued education to enhance skills,
training, and experience already acquired. High level of analytical ability where problems are
unusual, difficult or complex High level of interpersonal skills to work effectively with others
Demonstrated problem solving and root cause analysis capabilities Able to work independently
with limited supervision Excellent oral and written communication skills Experience with
electrical wiring and conduit installation Certified Production Technician MSSC Certified 11/13
OSHA Safety Training GD&T / Metrology / SPC Experienced Hi-Lo and Heavy Equipment
Operator Mechanically Inclined: Hand/Power Specialty Tools Troubleshooting Industrial
Machinery PLC knowledge/Servo motor knowledge basic Electrical knowledge
wiring/troubleshooting hydraulics/pneumatics Mechanical Systems Safety and Teamwork
Excellent organization skills Lockout Tag out/ OSHA & Blueprint knowledge Qualified problem
solver with skills in resolving issues encountered during production with minimal supervision.
Production Assistance
Critical Thinking
Time Management
Equipment Calibration
Team Training
Safety Equipment
ACUMENT GLOBAL
Maintenance Technician | Sterling Heights, MI | September 2015 - February 2016
Troubleshoot and repair header and roller machines Perform general maintenance duties in facility Conduct
P.M., install and removal of equipment Repair and maintain header and roller machines Repair and maintain air
lines and hydraulics Fabricate components out of metal for operators to use for ease of access and safety
Continuous technical training for improvement.
Provide skilled support within the manufacturing environment.
Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges,
protractors and ring gauges.
Monitor gauges, dials and various indicators to ensure machines are working properly.
Perform complex mechanical alignments and calibration of equipment to quality standards.
Remain consistently compliant with 5S standards.
AUNT MILLIES BAKERY
Maintenance Technician | Plymouth, MI | July 2015 - September 2015
Troubleshoot and repair conveyors, servo motors, and all production equipment.
Continuous operation of conveyor belts.
Replace motors and troubleshoot production equipment.
Remain consistently compliant with 5S standards.
Utilize control mechanisms or hands-on procedures to operate machines.
Monitor gauges, dials and various indicators to ensure machines are working properly.
Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges,
protractors and ring gauges.
Provide skilled support within the manufacturing environment.
FAURECIA
Maintenance Technician | Fraser, MI | April 2015 - July 2015
EDUCATION
Troubleshoot and repaired mechanical, pneumatic, hydraulic, and electrical components on injection mold press
machines Analyzed mechanical and operational problems on equipment Made necessary corrections and
adjustments to maintain maximum production and quality Repaired and worked on over 20 injection mold
machines Troubleshoot and punch press machines Electrical troubleshooting of PLC's and sensor controls and
switches.
Provide skilled support within the manufacturing environment.
Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges,
protractors and ring gauges.
Monitor gauges, dials and various indicators to ensure machines are working properly.
Remain consistently compliant with 5S standards.
BESTBLOCK
Machine Operator/Technician | Warren, MI | March 2014 - April 2015
Operated Besser Block Press machine Repaired and provided continuous maintenance, assuring that the press
was in working condition at all times Insure production of concrete blocks, controlling the mixture content Stick
weld iron components and repair hydraulics/pneumatics Repair/replace, remove and install servo motors
Conducted general plant maintenance to insure continued production.
Facilitate equipment applying water, electrical power and leveling during installation processes.
Perform complex mechanical alignments and calibration of equipment to quality standards.
Utilize control mechanisms or hands-on procedures to operate machines.
Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges,
protractors and ring gauges.
Inspect finished products for quality and adherence to customer specifications.
TOWER AUTOMOTIVE
Production Assembly | Clinton Township, MI | November 2013 - April 2014
Assembly line work for robotic steel weld chassis assembly.
UAW 177.
Loaded and unloaded steel parts on staging platform.
Controlled assembly, keeping robotic arms in line and working properly.
Observe robotics, making sure the weld process was completed properly.
Inspect finished products for quality and adherence to customer specifications.
Remain consistently compliant with 5S standards.
CITY OF SOUTHFIELD
Maintenance/laborer | Southfield, MI | November 2010 - November 2012
Facility Maintenance.
All outdoor maintenance including lawn and blight removal.
City buildings' general maintenance.
General cleanliness and repairs as needed.
CERTIFICATE manufacturing
Macomb Community College
MI, | 2013
Manufacturing Skills Standards Council

Vincel lewis resume 1

  • 1.
    PROFESSIONAL SUMMARY SKILLS WORK HISTORY VINCELLEWIS 24500 PANAMA AVE., WARREN, MI 48091 H: 248-820-2907 | C: 586-945-4026 | vincellewis@yahoo.com Maintenance Technician seeking employment with continued education to enhance skills, training, and experience already acquired. High level of analytical ability where problems are unusual, difficult or complex High level of interpersonal skills to work effectively with others Demonstrated problem solving and root cause analysis capabilities Able to work independently with limited supervision Excellent oral and written communication skills Experience with electrical wiring and conduit installation Certified Production Technician MSSC Certified 11/13 OSHA Safety Training GD&T / Metrology / SPC Experienced Hi-Lo and Heavy Equipment Operator Mechanically Inclined: Hand/Power Specialty Tools Troubleshooting Industrial Machinery PLC knowledge/Servo motor knowledge basic Electrical knowledge wiring/troubleshooting hydraulics/pneumatics Mechanical Systems Safety and Teamwork Excellent organization skills Lockout Tag out/ OSHA & Blueprint knowledge Qualified problem solver with skills in resolving issues encountered during production with minimal supervision. Production Assistance Critical Thinking Time Management Equipment Calibration Team Training Safety Equipment ACUMENT GLOBAL Maintenance Technician | Sterling Heights, MI | September 2015 - February 2016 Troubleshoot and repair header and roller machines Perform general maintenance duties in facility Conduct P.M., install and removal of equipment Repair and maintain header and roller machines Repair and maintain air lines and hydraulics Fabricate components out of metal for operators to use for ease of access and safety Continuous technical training for improvement. Provide skilled support within the manufacturing environment. Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges, protractors and ring gauges. Monitor gauges, dials and various indicators to ensure machines are working properly. Perform complex mechanical alignments and calibration of equipment to quality standards. Remain consistently compliant with 5S standards. AUNT MILLIES BAKERY Maintenance Technician | Plymouth, MI | July 2015 - September 2015 Troubleshoot and repair conveyors, servo motors, and all production equipment. Continuous operation of conveyor belts. Replace motors and troubleshoot production equipment. Remain consistently compliant with 5S standards. Utilize control mechanisms or hands-on procedures to operate machines. Monitor gauges, dials and various indicators to ensure machines are working properly. Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges, protractors and ring gauges. Provide skilled support within the manufacturing environment. FAURECIA Maintenance Technician | Fraser, MI | April 2015 - July 2015
  • 2.
    EDUCATION Troubleshoot and repairedmechanical, pneumatic, hydraulic, and electrical components on injection mold press machines Analyzed mechanical and operational problems on equipment Made necessary corrections and adjustments to maintain maximum production and quality Repaired and worked on over 20 injection mold machines Troubleshoot and punch press machines Electrical troubleshooting of PLC's and sensor controls and switches. Provide skilled support within the manufacturing environment. Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges, protractors and ring gauges. Monitor gauges, dials and various indicators to ensure machines are working properly. Remain consistently compliant with 5S standards. BESTBLOCK Machine Operator/Technician | Warren, MI | March 2014 - April 2015 Operated Besser Block Press machine Repaired and provided continuous maintenance, assuring that the press was in working condition at all times Insure production of concrete blocks, controlling the mixture content Stick weld iron components and repair hydraulics/pneumatics Repair/replace, remove and install servo motors Conducted general plant maintenance to insure continued production. Facilitate equipment applying water, electrical power and leveling during installation processes. Perform complex mechanical alignments and calibration of equipment to quality standards. Utilize control mechanisms or hands-on procedures to operate machines. Calibrate/adjust equipment to ensure quality production utilizing calipers, micrometers, height gauges, protractors and ring gauges. Inspect finished products for quality and adherence to customer specifications. TOWER AUTOMOTIVE Production Assembly | Clinton Township, MI | November 2013 - April 2014 Assembly line work for robotic steel weld chassis assembly. UAW 177. Loaded and unloaded steel parts on staging platform. Controlled assembly, keeping robotic arms in line and working properly. Observe robotics, making sure the weld process was completed properly. Inspect finished products for quality and adherence to customer specifications. Remain consistently compliant with 5S standards. CITY OF SOUTHFIELD Maintenance/laborer | Southfield, MI | November 2010 - November 2012 Facility Maintenance. All outdoor maintenance including lawn and blight removal. City buildings' general maintenance. General cleanliness and repairs as needed. CERTIFICATE manufacturing Macomb Community College MI, | 2013 Manufacturing Skills Standards Council