The Vibrator Finishing Machines are mass finishing machines used for deburring, polishing, descaling and surface treatment of different metal and plastic components. Vibratory tumble finishing systems produce a cutting action by shaking the processing vessel (finishing tub) at a high speed thus causing the tumbling media and parts to scrub against each other and this scrubbing action removes burrs on the surfaces as rotating in eccentric motion weights mounted on the tub produces this shaking action of the tub which produces a cutting action that is very thorough and removes material from pockets and recesses on the surface therefore it is used for delicate or intricate parts too. This motion with high speeds and a short stroke can also run large bulky parts without damage such as Large wing spans and casted goods. The action is that of a small orbit at a high speed and thus is very powerful and causes little stress on the parts being polished. The finishing and deburring process is increased in vibratory barrels due to the relative motion between finishing media and the pieces as vibrations are generated and with the help of three dimensional vibrations and thus the process becomes more effective which is controlled by amplitude and frequency of the vibrations generated by mounted weights, which imparts higher force than the gravitational force. These machines can be harmonized to promote the best possible action and movement in deburring and polishing the surfaces, which will itself impart an achievable quality on polished components. Our machines with thick polyurethane inner lining with high quality specification has a longer life

1. www.metallurgyproducts.com
Metallurgy Products acts as manufacturers representative of Vibrating
Equipment such as Unbalanced Motors, Vibratory Finishing Machine,
Pneumatic Vibrators and Vibrating Machine.

2. www.metallurgyproducts.com
The Circular Vibrator Polishing Machines are mass finishing machines, used for
deburring, polishing, descaling, and surface treatment of metal and plastic
components, Vibratory tumble finishing systems produce a cutting action, shaking
the processing vessel (finishing tub) at a high speed thus causing the tumbling media
and parts to scrub against each other. This scrubbing action remove burrs. Rotating in
eccentric motion weights mounted on the tub produces the shaking action, These
deburring machines and finishing systems produce a cutting action that is very
thorough and remove material from pockets and recesses and inside bores unlike
barrel tumbler, so are used for delicate or intricate parts. With high speeds and a
short stroke, also run large bulky parts without damage such as Large wing spans.
The action is that of a small orbit at a high speed and thus is very powerful and
causes little stress on the parts.

3. www.metallurgyproducts.com

4. www.metallurgyproducts.com
Handle very small to large parts. Batch or continuous operation.
In-Process Inspection can be done.
Integral separation.
Better media and parts mixing since it has cascade and circular action both.
Full automation features.
It is specially designed in PU & PBR rubber lining having 3 component machine.
Optimum vibration are set these vibration make component.

5. www.metallurgyproducts.com
vibratory finishing machines can be utilize for the different
applications as Pre-plating finishing, Brightening, Smoothening,
polishing, Burnishing, De-rusting, Mark removing, cleaning , De-
scaling, De-Greasing, De-flashing, Micro Finish Improvements,
Cleaning, Radiusing, Surface Improvement and Smoothing, Ball
Burnishing, Cosmetic Finishing.

6. www.metallurgyproducts.com
We are offering a supreme array of Vibrating
Equipments such as that ensures flawless settling of
compact, dry, and Vibrating Table bulk materials in
containers. It ensures considerable gain in net weight
of container or reduction in size of the contents to
facilitate use of smaller containers. It helps to bring
down packaging as well as shipping costs. We offer
electromagnetic as well as electromechanical versions
to suit several applications. These are available at
leading industry rates.

7. www.metallurgyproducts.com
Compact and sturdy.
Flawless finish.
Cost effectiveness.

8. www.metallurgyproducts.com
Material: Ceramic powder
Temperature: Ambient (outside shade temp 2º to 47ºC).
Particle size: As per customer requirement.
Table size: 900 x 3000 mm.
Height: 700 mm.
MOC: Mild steel.
Amplitude: 0.5 to 2 mm Max.
Drive: 2 Nos. of unbalanced Vibro motor.

9. www.metallurgyproducts.com
Vibrating table.
Temperature: Ambient (outside shade temp 2º to 47ºC).
Particle size: As per customer requirement.
Table size: 900 x 3000 mm.
Height: 700 mm.
MOC: Mild steel.
Amplitude: 0.5 to 2 mm Max.
Drive: 2 Nos. of unbalanced Vibro motor.

10. www.metallurgyproducts.com

11. www.metallurgyproducts.com

12. www.metallurgyproducts.com

13. www.metallurgyproducts.com

14. www.metallurgyproducts.com
Mr. Vivek Grover
Address : UG 8A Usha Kiran Building Commercial Complex
Azadpur New Delhi – 110033
Email ID : metallurgyproducts@gmail.com
Website : www.metallurgy.net.in
Call Us - +91-9810868858