Step-by-step instructions to get an LCD projector ready to project DDR from a Playstation.

1. Using an LCD Projector & Playstation to Enable DDR Fun

3. The cord that comes with your Playstation inserts in the projector like this.

4. The Playstation has two outlets on one side. The first connects the Playstation to the projector (the other end of the multi-color cord) and the other connects it to power. Connects to projector Connects to power strip

7. Once everything is on, fiddle with the projector settings until the projector recognizes the Playstation. First, push the standby button to get it going. Next you push the input button repeatedly (go slow) until the Playstation is projected.

8. If you haven’t already done so, make sure the lens cover is over. Then adjust your picture until it is in focus. Lens cover pushed to the left Twist here to adjust focus

9. Insert the DDR Dance mats in the Playstation just like you would insert Playstation controls. Two dance mats inserted In Playstation.

10. Dance pads should be set to each side so dancers can view the screen.

11. At some point, take a moment to consider safety. Tuck the power strip under your stand/table so it’s out of the way. Cords from the DDR mats could be secured with tape if you want to be extra safe. Cover up the cord that connects to wall with a rug so you don’t have a tripping hazard like there is here.

12. You’ll want to set up chairs behind the gamers so others can watch the fun.