Untitled presentation.pptx
•Download as PPTX, PDF•
0 likes•1 view
Megaphones, musical instruments, and stethoscopes use multiple reflections of sound to direct sound in a particular direction. Megaphones and instruments reflect sound through tubes and conical openings to guide it towards an audience. Stethoscopes reflect the sounds within the body, like heartbeats, to a doctor's ears. Concert halls and cinemas curve their ceilings and use curved sound boards to reflect sound evenly throughout the space.
Report
Share
Report
Share
Recommended
part 1 acoustic.pptx
Architectural acoustics deals with controlling sound in buildings by managing how sound is transmitted, absorbed, diffracted or reflected. The goal is to reduce unwanted noise and improve listening conditions. Proper design of acoustical spaces like theaters and auditoriums is important for evenly distributing sound without defects like echoes or dead spots. The size, shape and orientation of rooms, as well as sound-absorbing and reflective materials used in construction, impact a building's acoustical qualities. Architectural acoustics provides guidance to designers on room acoustics and achieving the optimal reverberation time for different types of spaces.
audition1.ppt
The document discusses the physiology of hearing. It begins by explaining how sound waves are transduced into neural signals in the ear. It then describes the anatomy of the ear, including the outer, middle and inner ear. The outer ear collects sound waves and the middle ear amplifies vibrations. In the inner ear, vibrations cause a traveling wave that bends hair cells to stimulate neurons. This leads to neural signals being sent to the brain where the auditory cortex interprets sounds in a tonotopic organization.
STETHOSCOPE
A stethoscope is a medical instrument used to listen to the heart and breathing. It was invented in 1816 by René Laennec in France. A typical stethoscope has a small disc-shaped resonator placed on the chest, connected by tubes to earpieces. Stethoscopes come in several types including single, binaural, differential, electronic, fetal, and esophageal models used for different listening applications.
Building Acoustics
Acoustics is the scientific study of sound, including how it behaves and is perceived. It deals with properties of sound waves like reflection, refraction, absorption, and interference. Acoustics is important for learning environments and other spaces where noise can be distracting or carry too much. Good acoustics involve distributing sound well, creating a sense of intimacy, and having proper reverberation times. Factors like reverberation time, loudness, echoes, and sound reflections off surfaces can impact architectural acoustics. A variety of materials like sound absorbers, reflectors, and diffusers are used to control sound.
Ch.14.sound
Vibrations from an object transfer through particles in solids, liquids, and gases, creating regions of high and low pressure called sound waves. As the object vibrates, it alternately compresses and expands the surrounding particles, transmitting the vibration in all directions. The human ear detects these pressure variations as sound when the vibrations reach the eardrum and cause the bones of the middle ear to vibrate, sending nerve signals to the brain. Loud sounds have greater amplitudes and can damage hearing by overwhelming the delicate structures of the inner ear.
Unit 17 audio_production
This document defines and describes various audio production effects units and techniques. It defines reverberation, distortion, talk box, pitch bender, delay, chorus, autotune, tremolo, vibrato, gating, compression, limiting, surround sound, mono, and stereo audio techniques. It provides technical descriptions of each effect and notes that examples can be found on YouTube.
Acoustic Details of Theatre
The document discusses acoustics in theatre design. It describes different types of theatre stages including proscenium, thrust, and arena stages. It explains considerations for audience comfort including physical comfort from seating and ability to see/hear, as well as social comfort from the theatre's location. Sound waves can be absorbed or reflected by different construction materials and designs. A case study of the Tagore Theatre in Chandigarh is provided which was designed based on acoustics, sightlines, and stage size in relation to the auditorium. Its acoustic design uses a canopy and wall surfaces lined with earthenware pots to absorb and reflect sound.
Recommended
part 1 acoustic.pptx
Architectural acoustics deals with controlling sound in buildings by managing how sound is transmitted, absorbed, diffracted or reflected. The goal is to reduce unwanted noise and improve listening conditions. Proper design of acoustical spaces like theaters and auditoriums is important for evenly distributing sound without defects like echoes or dead spots. The size, shape and orientation of rooms, as well as sound-absorbing and reflective materials used in construction, impact a building's acoustical qualities. Architectural acoustics provides guidance to designers on room acoustics and achieving the optimal reverberation time for different types of spaces.
audition1.ppt
The document discusses the physiology of hearing. It begins by explaining how sound waves are transduced into neural signals in the ear. It then describes the anatomy of the ear, including the outer, middle and inner ear. The outer ear collects sound waves and the middle ear amplifies vibrations. In the inner ear, vibrations cause a traveling wave that bends hair cells to stimulate neurons. This leads to neural signals being sent to the brain where the auditory cortex interprets sounds in a tonotopic organization.
STETHOSCOPE
A stethoscope is a medical instrument used to listen to the heart and breathing. It was invented in 1816 by René Laennec in France. A typical stethoscope has a small disc-shaped resonator placed on the chest, connected by tubes to earpieces. Stethoscopes come in several types including single, binaural, differential, electronic, fetal, and esophageal models used for different listening applications.
Building Acoustics
Acoustics is the scientific study of sound, including how it behaves and is perceived. It deals with properties of sound waves like reflection, refraction, absorption, and interference. Acoustics is important for learning environments and other spaces where noise can be distracting or carry too much. Good acoustics involve distributing sound well, creating a sense of intimacy, and having proper reverberation times. Factors like reverberation time, loudness, echoes, and sound reflections off surfaces can impact architectural acoustics. A variety of materials like sound absorbers, reflectors, and diffusers are used to control sound.
Ch.14.sound
Vibrations from an object transfer through particles in solids, liquids, and gases, creating regions of high and low pressure called sound waves. As the object vibrates, it alternately compresses and expands the surrounding particles, transmitting the vibration in all directions. The human ear detects these pressure variations as sound when the vibrations reach the eardrum and cause the bones of the middle ear to vibrate, sending nerve signals to the brain. Loud sounds have greater amplitudes and can damage hearing by overwhelming the delicate structures of the inner ear.
Unit 17 audio_production
This document defines and describes various audio production effects units and techniques. It defines reverberation, distortion, talk box, pitch bender, delay, chorus, autotune, tremolo, vibrato, gating, compression, limiting, surround sound, mono, and stereo audio techniques. It provides technical descriptions of each effect and notes that examples can be found on YouTube.
Acoustic Details of Theatre
The document discusses acoustics in theatre design. It describes different types of theatre stages including proscenium, thrust, and arena stages. It explains considerations for audience comfort including physical comfort from seating and ability to see/hear, as well as social comfort from the theatre's location. Sound waves can be absorbed or reflected by different construction materials and designs. A case study of the Tagore Theatre in Chandigarh is provided which was designed based on acoustics, sightlines, and stage size in relation to the auditorium. Its acoustic design uses a canopy and wall surfaces lined with earthenware pots to absorb and reflect sound.
Arthur hagopian & avetis hagopian photo observation
The document describes the environment and equipment of a recording studio. It discusses how the hallway prepares artists for their session by helping them release negative energy. The lounge provides a waiting area for last-minute preparations. The studio itself is designed to create a calm atmosphere where artists can focus and work to their full potential. Key equipment includes the mixer, monitors, channel strips, and studio rack, all used to achieve the perfect sound quality. Sessions during the day focus on finalizing projects, while nighttime sessions provide a more exciting view outside to relax artists.
Arthur hagopian & avetis hagopian photo observation
The document describes the environment and equipment of a recording studio. It discusses how the hallway prepares artists for their session by helping them release negative energy. The lounge provides a waiting area for last-minute preparations. The studio itself is designed to create a calm atmosphere where artists can focus and work to their full potential. Key equipment includes the mixer, monitors, channel strips, and studio rack, all used to achieve the perfect sound quality. Sessions during the day focus on finalizing projects, while nighttime sessions provide an exciting view that can relax artists.
Sound, harmonics, frequency and pitch
This document discusses concepts related to music technology including sound, pitch, frequency, harmonics, equalization (EQ), synthesis, oscillators, sound envelopes, and filters. It explains that sound is pressure disturbances propagating through a medium, usually air, while pitch is the repetition rate of a sound determined by its fundamental frequency. It describes how EQ is used to boost or cut certain frequencies to alter tonal qualities. Synthesis and sound design are also covered, noting how oscillators, envelopes, and filters can be used to manipulate raw waveforms and create customized sounds.
Directional Sound Speakers
This document discusses directional sound speakers and noise pollution. It provides information on:
- How directional speakers work using ultrasound to create tightly focused sound beams. This allows sound to be aimed at specific locations.
- Common uses of directional speakers including in museums, retail stores, and hospitals to provide localized sound without adding noise elsewhere.
- Inventors who helped develop the technology including Woody Norris and Dr. Joseph Pompei.
- Issues around noise pollution from sources like transportation, festivals, and how it can impact human and animal health. Standards and solutions to reduce noise pollution are discussed.
auditoriumfinal-140407113634-phpapp02.pptx
The document discusses key considerations in the design of auditoriums and recording studios. It addresses factors like room shape, dimensions, absorption, reverberation time, ambient noise levels, and how they impact acoustics. Optimal design aims to provide clear sound across all seating areas while avoiding echoes or other artifacts. Standards provide guidelines on design elements like volume-to-seat ratios and ceiling heights to achieve good speech intelligibility or musical quality depending on the room's function.
Handout of sound
This document discusses basic concepts in music technology including sound, pitch, frequency, harmonics, equalization (EQ), oscillators, synthesis, filters, and sound design. It explains that sound is created by pressure disturbances propagating through air. Pitch is defined by the repetition rate of a sound, while frequency refers specifically to the repetition rate of a simple oscillator. Harmonics are the multiple frequencies present in all oscillations that give a sound its tone. EQ is used to boost or cut certain frequency ranges to enhance or modify tones. Synthesis uses oscillators, envelopes, filters, and other tools to design and manipulate sounds from scratch.
Acoustic, Sound and Noise Control
This topic comprises of noise, sound and noise control in relation with environmental control system intended for architecture students
Auditorium ACOUSTICS
The document discusses the acoustical design considerations for an auditorium. It outlines key factors such as maintaining a low ambient noise level, providing appropriate reverberation time without echoes, and how the shape, dimensions, and seating arrangements of an auditorium impact hearing conditions. Different types of materials are also described that can be used to absorb or diffuse sound such as acoustical panels, diffusers, and noise barriers to improve the auditorium's acoustics. Proper loudspeaker systems and ceiling/wall designs can further enhance the sound quality within the auditorium space.
Sound and more sound
Sound is produced by vibrations and travels as waves through a medium. Sound waves can reflect, diffract, and interfere with each other. The speed of sound depends on factors like temperature, density, and elasticity of the medium. Loudness decreases with distance from the source and is measured in decibels. Pitch is determined by frequency, and the Doppler effect changes perceived pitch for moving sources. Hearing works through the outer, middle, and inner ear, and hearing loss can be addressed using hearing aids that amplify sound. Ultrasound uses high frequency sound for applications like medical imaging and echolocation.
Speaker Installation is essential for success at Houston
Speakers installation When an alternating current electrical audio signal is applied to its voice coil, a coil of wire suspended in a circular gap between the poles of a permanent magnet.
Sound
This document provides an overview of key sound production elements for theatre. It discusses the use of music to set atmosphere and pacing, different types of microphones and their purposes, speakers and how to avoid feedback, foldback speakers to allow performers to hear themselves, and the sound control box for adjusting volume, effects, tones and channels. It also covers sound cues, cue sheets, and creating sound effects with instruments or everyday objects.
Physics forum
This document discusses the reflection of sound and its applications. It begins by stating that sound reflects according to the same laws as light, with the incident, normal, and reflected rays lying in the same plane and the angles of incidence and reflection being equal. It then gives examples of applications including echoes, reverberation, use in stethoscopes, whispering galleries, sonar, and echolocation by bats.
Magazine Article
The document discusses various topics related to indoor acoustics, including:
1) It defines sound and acoustics, and describes how acoustics applies to many aspects of modern society.
2) It discusses acoustic treatment in recording studios to improve sound quality and accuracy for monitoring.
3) It describes different room types commonly found in recording studios, such as the live room, control room, and isolation booths.
Std 8th Science Chapter 9 Sound.pptx
1. Sound is produced by vibration of an object or medium. When a tightly stretched rubber band is plucked, it vibrates and produces sound. (Paragraph 1)
2. Sound needs a medium such as air to travel from the source to our ears. Removing the air prevents sound from traveling. (Paragraph 2)
3. The human ear detects sounds between 20-20,000 Hz. Frequencies outside this range are inaudible. Amplitude determines loudness while frequency determines pitch. (Paragraph 3)
Indoor and Outdoor Acoustics
Sound is a pressure wave that travels through air or other mediums and is perceived by humans and animals as hearing. It is produced when a medium such as air is set into vibration. Acoustics is the science of sound, including how it is transmitted and perceived. Recording studio acoustics aim to control the room environment to accurately capture sound without unwanted reverberation or leakage. Key aspects of studio design include soundproof live rooms, isolation booths, and absorbing surfaces and patterns on walls. Outdoor acoustic considerations include reducing wind noise, unwanted ambient noise, and ensuring the background atmosphere matches the intended recording.
Hearing aids and psychoacoustics.ppt
This document discusses hearing aid basics and advanced hearing aid technology. It explains that hearing aids have microphones, amplifiers and speakers to pick up and amplify sounds. Modern hearing aids use non-linear processing like compression and expansion to fit sounds within patients' dynamic ranges and mimic the cochlea's non-linearity. Frequency transposition moves inaudible high frequencies down an octave. Hearing aids may affect the natural resonance of the ear canal. Conductive hearing losses are easier to treat with hearing aids than sensorineural losses.
Sound
Sound is produced by vibrations that travel as sound waves through a medium such as air or water. When these vibrations reach the ear, they are interpreted by the brain as sound. Sound waves are caused by the vibrations of objects and consist of areas of high and low pressure called compressions and rarefactions. Sound can reflect off surfaces, and the reflection of sound follows the laws of reflection where the angle of incidence equals the angle of reflection. Reflections of sound cause echoes and reverberation. The human ear can detect sounds between 20 Hz to 20 kHz, known as the audible range. Ultrasound refers to sounds above this range and infrasound refers to sounds below. Ultrasound has many applications including
Introduction to Spatial Auditory Processing
This presentation gives introduction to human auditory system and signal processing goes on in brain to deduce spatial information about the sound we hear.
Acoustics
WHAT IS ACOUSTICS? what is sound? AMPLITUDE AND VOLUME, FREQUENCY AND PITCH
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY, TIMBRE
VELOCITY OF SOUND
AMPLITUDE
REFLECTION
Physiology of hearing
1. Sound waves enter the ear and cause the tympanic membrane and ossicles of the middle ear to vibrate, amplifying the vibrations.
2. These vibrations are transmitted through the fluid-filled cochlea, causing waves that stimulate hair cells along the basilar membrane and generating nerve impulses.
3. These nerve impulses travel along the vestibulocochlear nerve to the brain, where they are perceived as sound and properties such as pitch and volume are distinguished.
Presentation (6).ppt
This document discusses plant tissue and resources as well as animal husbandry. Plant tissue is mentioned twice while animal husbandry is referenced three times, indicating a focus on both plant materials and the care of animals.
Presentation (6).ppt
This document discusses plant tissue and resources as well as animal husbandry. It focuses on plant materials and the raising and care of animals. The main topics covered are plant tissue, plant resources, and animal husbandry.
More Related Content
Similar to Untitled presentation.pptx
Arthur hagopian & avetis hagopian photo observation
The document describes the environment and equipment of a recording studio. It discusses how the hallway prepares artists for their session by helping them release negative energy. The lounge provides a waiting area for last-minute preparations. The studio itself is designed to create a calm atmosphere where artists can focus and work to their full potential. Key equipment includes the mixer, monitors, channel strips, and studio rack, all used to achieve the perfect sound quality. Sessions during the day focus on finalizing projects, while nighttime sessions provide a more exciting view outside to relax artists.
Arthur hagopian & avetis hagopian photo observation
The document describes the environment and equipment of a recording studio. It discusses how the hallway prepares artists for their session by helping them release negative energy. The lounge provides a waiting area for last-minute preparations. The studio itself is designed to create a calm atmosphere where artists can focus and work to their full potential. Key equipment includes the mixer, monitors, channel strips, and studio rack, all used to achieve the perfect sound quality. Sessions during the day focus on finalizing projects, while nighttime sessions provide an exciting view that can relax artists.
Sound, harmonics, frequency and pitch
This document discusses concepts related to music technology including sound, pitch, frequency, harmonics, equalization (EQ), synthesis, oscillators, sound envelopes, and filters. It explains that sound is pressure disturbances propagating through a medium, usually air, while pitch is the repetition rate of a sound determined by its fundamental frequency. It describes how EQ is used to boost or cut certain frequencies to alter tonal qualities. Synthesis and sound design are also covered, noting how oscillators, envelopes, and filters can be used to manipulate raw waveforms and create customized sounds.
Directional Sound Speakers
This document discusses directional sound speakers and noise pollution. It provides information on:
- How directional speakers work using ultrasound to create tightly focused sound beams. This allows sound to be aimed at specific locations.
- Common uses of directional speakers including in museums, retail stores, and hospitals to provide localized sound without adding noise elsewhere.
- Inventors who helped develop the technology including Woody Norris and Dr. Joseph Pompei.
- Issues around noise pollution from sources like transportation, festivals, and how it can impact human and animal health. Standards and solutions to reduce noise pollution are discussed.
auditoriumfinal-140407113634-phpapp02.pptx
The document discusses key considerations in the design of auditoriums and recording studios. It addresses factors like room shape, dimensions, absorption, reverberation time, ambient noise levels, and how they impact acoustics. Optimal design aims to provide clear sound across all seating areas while avoiding echoes or other artifacts. Standards provide guidelines on design elements like volume-to-seat ratios and ceiling heights to achieve good speech intelligibility or musical quality depending on the room's function.
Handout of sound
This document discusses basic concepts in music technology including sound, pitch, frequency, harmonics, equalization (EQ), oscillators, synthesis, filters, and sound design. It explains that sound is created by pressure disturbances propagating through air. Pitch is defined by the repetition rate of a sound, while frequency refers specifically to the repetition rate of a simple oscillator. Harmonics are the multiple frequencies present in all oscillations that give a sound its tone. EQ is used to boost or cut certain frequency ranges to enhance or modify tones. Synthesis uses oscillators, envelopes, filters, and other tools to design and manipulate sounds from scratch.
Acoustic, Sound and Noise Control
This topic comprises of noise, sound and noise control in relation with environmental control system intended for architecture students
Auditorium ACOUSTICS
The document discusses the acoustical design considerations for an auditorium. It outlines key factors such as maintaining a low ambient noise level, providing appropriate reverberation time without echoes, and how the shape, dimensions, and seating arrangements of an auditorium impact hearing conditions. Different types of materials are also described that can be used to absorb or diffuse sound such as acoustical panels, diffusers, and noise barriers to improve the auditorium's acoustics. Proper loudspeaker systems and ceiling/wall designs can further enhance the sound quality within the auditorium space.
Sound and more sound
Sound is produced by vibrations and travels as waves through a medium. Sound waves can reflect, diffract, and interfere with each other. The speed of sound depends on factors like temperature, density, and elasticity of the medium. Loudness decreases with distance from the source and is measured in decibels. Pitch is determined by frequency, and the Doppler effect changes perceived pitch for moving sources. Hearing works through the outer, middle, and inner ear, and hearing loss can be addressed using hearing aids that amplify sound. Ultrasound uses high frequency sound for applications like medical imaging and echolocation.
Speaker Installation is essential for success at Houston
Speakers installation When an alternating current electrical audio signal is applied to its voice coil, a coil of wire suspended in a circular gap between the poles of a permanent magnet.
Sound
This document provides an overview of key sound production elements for theatre. It discusses the use of music to set atmosphere and pacing, different types of microphones and their purposes, speakers and how to avoid feedback, foldback speakers to allow performers to hear themselves, and the sound control box for adjusting volume, effects, tones and channels. It also covers sound cues, cue sheets, and creating sound effects with instruments or everyday objects.
Physics forum
This document discusses the reflection of sound and its applications. It begins by stating that sound reflects according to the same laws as light, with the incident, normal, and reflected rays lying in the same plane and the angles of incidence and reflection being equal. It then gives examples of applications including echoes, reverberation, use in stethoscopes, whispering galleries, sonar, and echolocation by bats.
Magazine Article
The document discusses various topics related to indoor acoustics, including:
1) It defines sound and acoustics, and describes how acoustics applies to many aspects of modern society.
2) It discusses acoustic treatment in recording studios to improve sound quality and accuracy for monitoring.
3) It describes different room types commonly found in recording studios, such as the live room, control room, and isolation booths.
Std 8th Science Chapter 9 Sound.pptx
1. Sound is produced by vibration of an object or medium. When a tightly stretched rubber band is plucked, it vibrates and produces sound. (Paragraph 1)
2. Sound needs a medium such as air to travel from the source to our ears. Removing the air prevents sound from traveling. (Paragraph 2)
3. The human ear detects sounds between 20-20,000 Hz. Frequencies outside this range are inaudible. Amplitude determines loudness while frequency determines pitch. (Paragraph 3)
Indoor and Outdoor Acoustics
Sound is a pressure wave that travels through air or other mediums and is perceived by humans and animals as hearing. It is produced when a medium such as air is set into vibration. Acoustics is the science of sound, including how it is transmitted and perceived. Recording studio acoustics aim to control the room environment to accurately capture sound without unwanted reverberation or leakage. Key aspects of studio design include soundproof live rooms, isolation booths, and absorbing surfaces and patterns on walls. Outdoor acoustic considerations include reducing wind noise, unwanted ambient noise, and ensuring the background atmosphere matches the intended recording.
Hearing aids and psychoacoustics.ppt
This document discusses hearing aid basics and advanced hearing aid technology. It explains that hearing aids have microphones, amplifiers and speakers to pick up and amplify sounds. Modern hearing aids use non-linear processing like compression and expansion to fit sounds within patients' dynamic ranges and mimic the cochlea's non-linearity. Frequency transposition moves inaudible high frequencies down an octave. Hearing aids may affect the natural resonance of the ear canal. Conductive hearing losses are easier to treat with hearing aids than sensorineural losses.
Sound
Sound is produced by vibrations that travel as sound waves through a medium such as air or water. When these vibrations reach the ear, they are interpreted by the brain as sound. Sound waves are caused by the vibrations of objects and consist of areas of high and low pressure called compressions and rarefactions. Sound can reflect off surfaces, and the reflection of sound follows the laws of reflection where the angle of incidence equals the angle of reflection. Reflections of sound cause echoes and reverberation. The human ear can detect sounds between 20 Hz to 20 kHz, known as the audible range. Ultrasound refers to sounds above this range and infrasound refers to sounds below. Ultrasound has many applications including
Introduction to Spatial Auditory Processing
This presentation gives introduction to human auditory system and signal processing goes on in brain to deduce spatial information about the sound we hear.
Acoustics
WHAT IS ACOUSTICS? what is sound? AMPLITUDE AND VOLUME, FREQUENCY AND PITCH
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY
LOUDNESS OR INTENSITY, TIMBRE
VELOCITY OF SOUND
AMPLITUDE
REFLECTION
Physiology of hearing
1. Sound waves enter the ear and cause the tympanic membrane and ossicles of the middle ear to vibrate, amplifying the vibrations.
2. These vibrations are transmitted through the fluid-filled cochlea, causing waves that stimulate hair cells along the basilar membrane and generating nerve impulses.
3. These nerve impulses travel along the vestibulocochlear nerve to the brain, where they are perceived as sound and properties such as pitch and volume are distinguished.
Similar to Untitled presentation.pptx (20)
Arthur hagopian & avetis hagopian photo observation
Arthur hagopian & avetis hagopian photo observation
Arthur hagopian & avetis hagopian photo observation
Arthur hagopian & avetis hagopian photo observation
Speaker Installation is essential for success at Houston
Speaker Installation is essential for success at Houston
More from Praveen0073
Presentation (6).ppt
This document discusses plant tissue and resources as well as animal husbandry. Plant tissue is mentioned twice while animal husbandry is referenced three times, indicating a focus on both plant materials and the care of animals.
Presentation (6).ppt
This document discusses plant tissue and resources as well as animal husbandry. It focuses on plant materials and the raising and care of animals. The main topics covered are plant tissue, plant resources, and animal husbandry.
meristematictissue-740 (1).pd
The document discusses plant tissues. It defines tissue as a group of organized cells with common origin, function and structure. There are three main types of tissues in plants: meristematic, permanent and specialized tissues. Meristematic tissue is made of actively dividing cells found in growing regions and gives rise to permanent tissues through cell differentiation. Permanent tissues include epidermis, ground and vascular tissues which make up the basic structure of plants. Specialized tissues are further classified into external and internal secretory tissues.
5sound-181206142548.pd
This document discusses sound and its properties. It describes how sound is produced through vibration and how it needs a medium like air, water or solid material to travel. Key points covered include the propagation of sound waves, their characteristics like wavelength and frequency, reflection of sound, and uses of both audible and ultrasonic sound including in SONAR systems.
Presentation.pptx
This document discusses different types of plant tissues. It mentions parenchyma tissue, which is a basic plant tissue, as well as collenchyma tissue. Parenchyma and collenchyma are two types of plant tissues.
Presentation (1).pptx
This document discusses different types of plant tissues. It mentions that tissue is a type of tissue and discusses parenchyma and collenchyma as two specific types of plant tissue. Parenchyma and collenchyma are mentioned as types of plant tissue.
Presentation (1).pptx
This document discusses different types of plant tissues. It mentions that tissue is a type of tissue and discusses parenchyma and collenchyma as two specific types of plant tissues. Parenchyma and collenchyma are mentioned as types of plant tissue.
Presentation.pptx
This document discusses different types of plant tissue. It mentions that tissue is a tissue and discusses parenchyma tissue. It also briefly mentions collenchyma tissue.
More from Praveen0073 (8)
Recently uploaded
一比一原版布兰登大学毕业证(BU毕业证书)如何办理
学校原件一模一样【微信：6496090】【布兰登大学毕业证(BU毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版马里兰大学毕业证(UMD毕业证书)如何办理
学校原件一模一样【微信：6496090】【马里兰大学毕业证(UMD毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...Designforuminternational
India’s architectural landscape is a vibrant tapestry that weaves together the country's rich cultural heritage and its modern aspirations. From majestic historical structures to cutting-edge contemporary designs, the work of Indian architects is celebrated worldwide. Among the many firms shaping this dynamic field, Design Forum International stands out as a leader in innovative and sustainable architecture. This blog explores some of the best Indian architects, highlighting their contributions and showcasing the most famous architects in India.AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
原版制作(MDIS毕业证书)新加坡管理发展学院毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(MDIS毕业证书)新加坡管理发展学院毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Figma is a cloud-based design tool widely used by designers for prototyping, UI/UX design, and real-time collaboration. With features such as precision pen tools, grid system, and reusable components, Figma makes it easy for teams to work together on design projects. Its flexibility and accessibility make Figma a top choice in the digital age.
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版肯特大学毕业证UKC成绩单一模一样
原件一模一样【微信：6496090】【肯特大学毕业证UKC学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理肯特大学毕业证UKC学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理肯特大学毕业证UKC学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理肯特大学毕业证UKC学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理肯特大学毕业证UKC学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
International Upcycling Research Network advisory board meeting 4
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
Recently uploaded (20)
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Introduction to User experience design for beginner
Introduction to User experience design for beginner
Virtual Tour Application Powerpoint for museum of edinburgh
Virtual Tour Application Powerpoint for museum of edinburgh
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Maximize Your Content with Beautiful Assets : Content & Asset for Landing Page
Manual ISH (International Society of Hypertension)
Manual ISH (International Society of Hypertension)
International Upcycling Research Network advisory board meeting 4
International Upcycling Research Network advisory board meeting 4
Untitled presentation.pptx
- 1. Uses of multiple reflection of sound presentation by Yashwanth. D
- 2. Uses of multiple reflection of sound ● Megaphones Or loudhailers, horns, musical instrument such as trumpets and shehanais, are all designed to send sound in a particular directions without spreading it in all directions
- 4. ● In these instruments, a tube followed by a conical opening reflects sounds successively to guide most of the sound waves from the source in the forward direction towards the audience.
- 5. ● Stethoscope is a medical instrument useful for listening to sound produced within the body, mainly in the heart Or lungs. ● In stethoscope the sound of the patient’s heartbeat reaches the doctors ears by multiple reflection of sound.
- 6. STETHOSCOPE
- 7. ● Generally the ceiling of concert halls, conference halls and cinema halls are curved so that sound after reflection reaches all corners of the halls. ● Sometimes a curved sound board may be placed behind the stage so that the sound, board spreads evenly across the width of the hall
- 9. Thank you