The document provides equipment reference forms describing three types of stage lighting equipment: a CCT Minuette Profile 650w lighting fixture used for specialist lighting cues, a DTS Scena Fresnel 1K used to provide a general wash across a stage, and an LED Parcan that has 181 individual lights that can change color. Key components of the lights described include gobos, shutters, clamps, safety chains, bulbs, gel frames, and barn doors.
Circuit Shorts June 2015 - Confused about light bulbs? We're here to enlighte...S W Bishop Electrical
As you probably know, shopping for light bulbs can be a nightmare. You can leave the shop empty-handed and feeling as if you need a degree in electrical engineering. Believe me, the myriad of choice confuses me sometimes! Hopefully this month's Circuit Shorts will clear up some of the confusion and shed some light (see what I did there?) on the many possibilities.
Presentazione piano retribuzione Oria Espresso 2014Oria Espresso
In questo video spieghiamo nel dettaglio il nuovo Piano di Retribuzione 2014 e vediamo insieme come sviluppare carriera e guadagni con la Condivisione Attiva Oria Espresso. Buona Visione!
Per informazioni o domande contattare:
marketing@oriaespresso.com oppure
formazione@oriaespresso.com
www.oriaespresso.com
Prof. Danica Purg, Dean and President of IEDC-Bled School of Management, President of Central and East European Management Development Association, Slovenia
Presentazione Opportunità Oria Espresso Febbraio 2014Oria Espresso
Questa video-presentazione illustra semplicemente il progetto di Condivisione Attiva Oria Espresso. Vengono affrontati in breve questi argomenti:
* Mercato;
* Prodotto;
* Sistema di Distribuzione;
* Piano di Retribuzione;
* Prossimi Eventi in programma.
Circuit Shorts June 2015 - Confused about light bulbs? We're here to enlighte...S W Bishop Electrical
As you probably know, shopping for light bulbs can be a nightmare. You can leave the shop empty-handed and feeling as if you need a degree in electrical engineering. Believe me, the myriad of choice confuses me sometimes! Hopefully this month's Circuit Shorts will clear up some of the confusion and shed some light (see what I did there?) on the many possibilities.
Presentazione piano retribuzione Oria Espresso 2014Oria Espresso
In questo video spieghiamo nel dettaglio il nuovo Piano di Retribuzione 2014 e vediamo insieme come sviluppare carriera e guadagni con la Condivisione Attiva Oria Espresso. Buona Visione!
Per informazioni o domande contattare:
marketing@oriaespresso.com oppure
formazione@oriaespresso.com
www.oriaespresso.com
Prof. Danica Purg, Dean and President of IEDC-Bled School of Management, President of Central and East European Management Development Association, Slovenia
Presentazione Opportunità Oria Espresso Febbraio 2014Oria Espresso
Questa video-presentazione illustra semplicemente il progetto di Condivisione Attiva Oria Espresso. Vengono affrontati in breve questi argomenti:
* Mercato;
* Prodotto;
* Sistema di Distribuzione;
* Piano di Retribuzione;
* Prossimi Eventi in programma.
1. Equipment
Reference
Form
Type
and/
Make
of
equipment:
CCT
Minuette
Profile
650w
Description:
The
CCT
Minuette
Profile
is
mainly
used
for
specialist
lighting
cues
such
as
a
change
in
definition
or
to
create
a
spotlight.
Another
feature
on
the
Profile
is
the
focusing
handles
which
sometimes
have
two.
One
would
be
for
making
the
beam
bigger
or
smaller
and
the
other
one
would
be
making
it
sharper
or
softer
In
a
profile
you
can
add
a
Gobo,
which
is
like
a
filter
which
projects
a
still
image
e.g
a
window,
which
can
be
removed
from
the
light.
(Only
remove
once
has
cooled
down
because
the
light
can
become
hot)
The
light
has
a
beam
throw
of
17-‐36
degrees
Key
Components
&
Accessories
• Shutters-‐Block
off
certain
sides
of
the
beam
to
give
a
straight
and
crisp
line.
You
would
use
them
for
if
you
had
a
spotlight
and
wanted
to
cut
of
one
of
the
edges
you
would
just
simply
shut
the
correct
shutter.
• G
Clamp-‐
The
G
clamp
is
for
hanging
the
light
onto
the
rig,
which,
is
held
together
by
a
washer
and
a
bolt,
which
can
be
tightened
or
loosened.
This
is
useful
as
it
is
easier
to
position
the
light.
• Iris-‐
An
Iris
makes
the
beam
of
light
smaller
or
wider,
without
the
focusing
handle.
This
makes
it
much
easier.
• Bulb-‐
Without
the
bulb
the
light
won’t
work.
When
placing
a
bulb
into
the
light
you
must
not
touch
the
glass
as
it
can
shorten
the
life
of
the
bulb.
The
bulb
is
a
halogen
bulb
which
is
650w
bulb
which
is
not
as
clear
as
a
HPL
bulb
which
575w
and
is
much
clearer
and
brighter.
2. Equipment
Reference
Form
Type
and/
Make
of
equipment:
DTS
Scena
Fresnel
1K
Description:
DTS
Scena
Fresnel
is
used
mainly
to
cover
the
stage
to
give
a
general
wash.
This
type
of
light
is
quite
popular
within
the
theatre
industry.
The
light
uses
a
1k
bulb
producing
a
brighter
light
and
a
longer
beam
throw
than
other
fresnels
and
so
would
be
more
ideal
to
use
in
a
general
wash
as
you
wouldn’t
need
as
many
thus
freeing
room
on
the
rig.
With
the
DTS
Fresnel
there
is
a
focusing
handle
which,
is
used
to
either
narrow
or
widen
the
beam.
One
many
of
the
lights
we
have
study
the
focusing
handle
is
mainly
used
for
how
clear
the
beam
of
light
is.
Also
with
the
DTS,
gels
can
be
added
my
simply
putting
the
gel
into
the
gel
frame.
Key
Components
&
Accessories
• G
Clamp-‐
The
G
clamp
is
for
hanging
the
light
onto
the
rig,
which,
is
held
together
by
a
washer
and
a
bolt,
which
can
be
tightened
or
loosened.
This
is
useful
as
it
is
easier
to
position
the
light.
• Safety
Chain-‐
The
Safety
chain
is
one
of
the
most
important
components.
One
reason
for
this
is
because
if
the
light
falls
of
the
rig
the
safety
chain
will
support
the
weight
and
just
hang.
Depending
on
the
weight
of
the
light
depends
on
the
type
of
chain.
• Bulb-‐
Without
the
bulb
the
light
won’t
work.
When
placing
a
bulb
into
the
light
you
must
not
touch
the
glass
as
it
can
shorten
the
life
of
the
bulb.
• Gel
Frame-‐
You
don’t
always
have
to
use
a
gel,
you
can
just
use
the
natural
light.
You
must
use
a
gel
frame
because
if
you
just
put
the
gel
into
the
light,
when
switched
on
will
melt
to
the
light.
• Barn
Doors-‐
Barn
doors
are
optional
on
the
light.
They
are
used
for
positioning
the
light
and
changing
the
size
of
the
beam.
When
the
light
is
switched
on
the
barn
doors
get
extremely
hot.
Barn
Doors
Where
the
G
Clamp
would
hang
from
Gel
Frame
3.
Equipment
Reference
Form
Type
and/
Make
of
equipment:
LED
Parcan
Description:
An
LED
Parcan
has
181
individual
lights,
which
changes
Colour.
On
the
back
of
the
Par
Can
there
are
little
switches,
which
allow
you
to
change
different
colours,
which
means
there
is
no
need
for
gels.
LED
Par
Cans
also
are
sensitive
to
movement,
so
when
movement
is
detected
they
will
simply
change
to
a
different
colour.
LED
Par
Cans
are
one
of
the
easiest
lights
to
use,
as
they
don’t
have
to
be
focused
or
have
anything
attached
to
the
light
itself.
The
light
can
also
stand
on
the
floor
instead
of
hanging
from
a
rig.
They
are
mainly
used
on
the
floor
and
also
special
effects.
The
bulb,
reflector
and
lense
are
all
one
unit
so
the
light
so
the
beam
cannot
be
focused.
Key
Components
&
Accessories
• G
Clamp-‐
The
G
clamp
is
for
hanging
the
light
onto
the
rig,
which,
is
held
together
by
a
washer
and
a
bolt,
which
can
be
tightened
or
loosened.
This
is
useful
as
it
is
easier
to
position
the
light.
• Safety
Chain-‐
The
Safety
chain
is
one
of
the
most
important
components.
One
reason
for
this
is
because
if
the
light
falls
of
the
rig
the
safety
chain
will
support
the
weight
and
just
hang.
Depending
on
the
weight
of
the
light
depends
on
the
type
of
chain.
Individual
LED
(181)
4.
Equipment
Reference
Form
Type
and/
Make
of
equipment:
Pin
Spot
30w
Description:
A
pin
spot
is
mainly
used
for
shinning
on
to
small
objects
such
as
a
rotating
disco
ball
or
used
as
a
Spotlight.
The
pin
spot
doesn’t
really
have
many
features
such
as
Gel
Frame
or
gobos.
This
light
is
one
of
the
easiest
to
use
as
there
are
not
many
features.
One
problem
with
the
Pin
Spot
is
that
the
light
has
to
be
quite
close
to
the
object,
as
it
does
not
generate
enough
power
compared
to
the
other
lights.
One
difference
with
a
pin
spot
is
that
the
bulb
inside
is
much
bigger
than
the
other
lights.
Key
Components
&
Accessories
• Bulb-‐
Without
the
bulb
the
light
won’t
work.
When
placing
a
bulb
into
the
light
you
must
not
touch
the
glass
as
it
can
shorten
the
life
of
the
bulb.
• G
Clamp-‐
The
G
clamp
is
for
hanging
the
light
onto
the
rig,
which,
is
held
together
by
a
washer
and
a
bolt,
which
can
be
tightened
or
loosened.
This
is
useful
as
it
is
easier
to
position
the
light
• Safety
Chain-‐
The
Safety
chain
is
one
of
the
most
important
components.
One
reason
for
this
is
because
if
the
light
falls
of
the
rig
the
safety
chain
will
support
the
weight
and
just
hang.
Depending
on
the
weight
of
the
light
depends
on
the
type
of
chain.
Tighten
or
loosen
to
change
the
angle
Different
Bulb
5.
Equipment
Reference
Form
Type
and/
Make
of
equipment:
Selecon
Fresnel
650w
Description:
The
Selecon
Fresnel
650w
is
used
to
create
a
general
wash
of
light
on
the
This
light
is
used
for
general
coverage
of
the
stage
rather
than
a
Pin
Spot
which
only
covers
a
specific
area
or
item.
Barn
doors
are
used
to
block
or
change
the
angle
of
the
beam
or
make
the
beam
narrower
or
wider.
This
light
would
be
good
in
small
or
big
areas.
Bulbs
not
as
powerful
or
brighter
than
a
1k
Fresnel
so
wouldn’t
be
used
if
1Ks
are
available
to
free
room
on
the
rig
Key
Components
&
Accessories
• G
Clamp-‐
The
G
clamp
is
for
hanging
the
light
onto
the
rig,
which,
is
held
together
by
a
washer
and
a
bolt,
which
can
be
tightened
or
loosened.
This
is
useful
as
it
is
easier
to
position
the
light.
• Safety
Chain-‐
The
Safety
chain
is
one
of
the
most
important
components.
One
reason
for
this
is
because
if
the
light
falls
of
the
rig
the
safety
chain
will
support
the
weight
and
just
hang.
Depending
on
the
weight
of
the
light
depends
on
the
type
of
chain.
• Bulb-‐
Without
the
bulb
the
light
won’t
work.
When
placing
a
bulb
into
the
light
you
must
not
touch
the
glass
as
it
can
shorten
the
life
of
the
bulb.
• Gel
Frame-‐
You
don’t
always
have
to
use
a
gel,
you
can
just
use
the
natural
light.
You
must
use
a
gel
frame
because
if
you
just
put
the
gel
into
the
light,
when
switched
on
will
melt
to
the
light.
• Barn
Doors-‐
Barn
doors
are
optional
on
the
light.
They
are
used
for
positioning
the
light
and
changing
the
size
of
the
beam.
When
the
light
is
switched
on
the
barn
doors
get
extremely
hot.
6. Equipment
Reference
Form
Type
and/
Make
of
equipment:
Source
4
Jr
Profile
Description:
This
light
can
be
used
for
specialist
lighting
effects
such
as
spotlights
or
to
subtly
change
focus
on
the
stage.
Key
Components
&
Accessories
• Bulb-‐
Without
the
bulb
the
light
won’t
work.
When
placing
a
bulb
into
the
light
you
must
not
touch
the
glass
as
it
can
shorten
the
life
of
the
bulb,
this
light
specifically
uses
HPL
bulb
which
is
lighter
and
a
clearer
bulb.
And
is
also
energy
saving
and
so
will
last
longer
than
other
profiles.
• Iris-‐
An
Iris
makes
the
beam
of
light
smaller
than
the
shutters
do
• G
Clamp-‐
The
G
clamp
is
for
hanging
the
light
onto
the
rig,
which,
is
held
together
by
a
washer
and
a
bolt,
which
can
be
tightened
or
loosened.
This
is
useful
as
it
is
easier
to
position
the
light.
• Shutters-‐Block
off
certain
sides
of
the
beam
to
give
a
straight
and
crisp
line.
You
would
use
them
for
if
you
had
a
spotlight
and
wanted
to
cut
of
one
of
the
edges
you
would
just
simply
shut
the
correct
shutter.
• Gobo-‐
A
Gobo
is
a
projection,
which
is
like
a
filter
and
projects.
7. Equipment
Reference
Form
Type
and/
Make
of
equipment:
Strand
Floodlight
Description:
This
light
produces
a
bright
wide
spread
of
light
and
it
cannot
be
focused
manually,
this
depends
on
where
the
light
is
positioned.
The
brightness
of
this
light
means
it’s
ideal
for
gels
or
used
to
light
a
cyclorama
Key
Components
&
Accessories
• G
Clamp-‐
The
G
clamp
is
for
hanging
the
light
onto
the
rig,
which,
is
held
together
by
a
washer
and
a
bolt,
which
can
be
tightened
or
loosened.
This
is
useful
as
it
is
easier
to
position
the
light.
• Safety
Chain-‐
The
Safety
chain
is
one
of
the
most
important
components.
One
reason
for
this
is
because
if
the
light
falls
of
the
rig
the
safety
chain
will
support
the
weight
and
just
hang.
Depending
on
the
weight
of
the
light
depends
on
the
type
of
chain.
• Bulb-‐
Without
the
bulb
the
light
won’t
work.
When
placing
a
bulb
into
the
light
you
must
not
touch
the
glass
as
it
can
shorten
the
life
of
the
bulb.
The
bulb
is
a
Halogen
bulb
and
is
not
as
bright
as
a
HPL
bulb.