The document describes the tp-link access point, a dual-band network device using 802.11ac technology, providing enhanced wireless performance with a total Wi-Fi range of 1300mbps on 5GHz and 450mbps on 2.4GHz. It includes features like multiple EAP management, password changes, and SSID configuration through the tplinkap.net interface. Additionally, it offers troubleshooting steps for common issues and emphasizes the device's compatibility with various electronic devices.

1. Tplinkap.net

2. Tp-Access link’s Point is a dual-band network device with the newest 802.11ac technology. It
provides enhanced wireless performance across your home. Furthermore, the access point is
equipped with 32 MU-MIMO technology, allowing you to connect to the wireless network
simultaneously. This gadget has a higher signal rate than a regular device. The 5GHz network,
as well as the 2.4GHz network, provide a total Wi-Fi range of 1300Mbps and 450Mbps,
respectively. The access point apparatus’s TP-Link Auranet Controller software allows for many
EAPs to be controlled and managed. The setup wizard may be redirected to tplinkap.net, and
the access point can be completely configured. Then, in a long-range area, you approach the
wireless signals totally.

3. Tplinkap.net is the tp-link access point’s login page

4. You must assure the Wi-Fi range on a PC or mobile device in order to log in
to the access point account.
Select or choose any available web interface on your Wi-Fi network-
connected device.
The login window can be accessed via the http://tplinkap.net login wizard.
Because the normal login admin panel does not provide access to the login
window, you must use the tp-link access point IP address.
You must type the default password in the login window to gain access to
the account.
Select the Login option from the drop-down menu.

5. Tplinkap.net has changed the access point’s password:-
You can change the tp-link Wi-Fi access point’s password using the http://tplinkap.net/ change
password wizard.
After the account has been logged off, connect to the access point using the default login IP or
web address.
Then, in their password field, type the default password for the tp-link access point.
Once you’ve logged in to your access point account, go to the menu page and select
management.
Select the access control option from the available options under administration.
Then, on the access point’s left page, click the password button.
Write an old password, a new password, and a new password for confirmation to effectively
change the login default password.
To save this new password, select the Save/Apply option.

6. Using the tplinkap.net IP address, you can change the
SSID on your Tp-link access point:-
Use the default login tplinkap.net IP address to connect to the tp-link access point.
192.168.1.1 is the default login IP address.
Simply type this default IP address into your favorite browser, and the access point
login wizard will be redirected.
Write admin in the password field and mention the admin details in the username
area.
Select the Maintenance option to navigate the Administration settings.
Choose the SSID option to alter the SSID of your tp-link access point.
In the username field, type the new username; the username must not be more
than 15 characters.
To store the SSID setting, click the save button.

7. With tplinkap.net, you may set up a
Tp-link Wi-Fi Access Point:-
Use the default login IP (http://192.168.0.254) to navigate the preferred
web interface and search the login wizard. To log in, you must first
establish a password.
To successfully execute the access point configuration, you must use the
tplinkap.net rapid setup procedure.
Now select the AP mode from the available model options.
You must configure the security protocol for the access point’s secure
network.
Configure the 5GHz network by selecting the network option to enjoy
streaming, gaming, and more.
Change the wireless channel to improve the Wi-Fi range.

8. You can instantly access the login admin panel from http://tplinkap.net and log in to
the account using the default credentials.
After logging into the access point account, select the advanced option from the drop-
down menu.
By selecting the system tools option, you can get to the administration.
Next, go to the part where you can retrieve your password.
On the password recovery page, enable password recovery is checked.
To send a mailbox, you must first designate one (From). In their field, write the SMTP
address as well.
You must specify a mailbox to receive the mailbox (To).
Tick the enable authentication option if encryption is required for the mailbox to be
sent.
In their field, mentions the login and password instructions.
Press the “Save” button.
How can I change the Tplink password for the Access
point?

9. http://tplinkap.net/
Go to http://tplinkap.net and use the password to log in to the account
using the login wizard.
Select Advanced Settings and System Tools from the drop-down menu.
From the system tools menu, select the firmware upgrade option.
Select the firmware file from the browse menu.
From the drop-down menu, select the upgrade option. The firmware update
procedure begins.

10. Restart the wireless access point:-
If the modem is attached to the access point, disconnect the connection.
Disconnect the access point from the outlet.
Next, look for the power button and push it for a few seconds.
The problem with tplinkap not working should now be resolved.
When the login web URL does not work, the device must be rebooted.

11. Make certain that tplinkap.net is properly and accurately referenced in the
web interface.
Check the browser interface version and, if it’s out of date, update it.
To access the default login wizard, type in the login IP address.
If the tp-link access point’s login page is unavailable, you won’t be able to
configure the network.
To go to the login page, use the default login IP:-

12. Reset the Tp-Link Access Point to factory defaults:-
Check for power; if the power LED light is off, press the power button to
turn it on.
Go to the advanced settings from the tplinkap.net admin page.
You must select the factory reset option from the system tool.
Select the factory reset option and confirm the pop-up message by
pressing the OK button.
After that, the access point device will be entirely reset and the
tplinkap.net issue will be resolved.

13. Ascertain that the cable connection is in good working
order:-
Double-check that the power cord is fully inserted into the power connector.
Also, make sure the AC power adapter is securely inserted into the wall outlet.
Check the turn-on position of the access point’s power button.
If the access point’s power does not turn on. Double-check the cable connection.

14. Review of the Tp-link wireless access point
The tp-link access point review, in my opinion, is excellent and far superior to the
other gadget evaluation. With this network, many host networks can easily and
quickly reach the wireless network. The wireless coverage is excellent and flawless.
The access point’s Wi-Fi range positively covers a long-range area. Inside the access
point is a strong signal amplifier that greatly improves the internet connection. The
Ethernet port is located here, and it allows a wired device to connect to the network.
In addition, the tp-link wireless Wi-Fi access point is compatible with cable modems,
PCs, laptops, mobile phones, and other devices. The tplinkap.net login admin panel
enables you to quickly configure the network. Perform the setup with ease using
this panel.

15. https://bit.ly/343HjWJ