1. The document provides removal and installation instructions for various components of a Toyota forklift, including the engine, radiator, air cleaner, and accelerator pedal.
2. Key steps include draining coolant, removing balance weights, disconnecting wiring and pipes, and slightly lifting the engine using special tools before removing it from the vehicle.
3. Reinstallation is the reverse of removal, and the document also provides procedures for adjusting the idle speed, maximum no-load RPM, and accelerator pedal height.
Jcb 540 170 load control (supplement) service repair manualjkmsedopl
The LCS load control system provides protection against tipping forward by progressively reducing boom lowering and tilt functions as stability limits are approached. It has two modes - Load Control mode, which is automatic, and Ground Work mode, which functions like a standard LMI. In Load Control mode, boom lowering and tilt are derated, while extend functions normally until the limit. Once reached, lowering, tilting, crowding and dumping are prevented to avoid further instability. Boom lift and retract allow load retrieval. The system uses LED indicators and switches to monitor stability and select modes.
New Holland CSX 7080 D660 Combine parts catalog PartCatalogs Net
The document provides an overview of parts for a CSX7080 D660 combine harvester, including:
- Identification plates, filters, belts, and a code table
- An engine pictorial overview and complete engine part listing
- Engine equipment such as the fuel tank, supports, pipe lines, and rotary screen shafts
- Coolers, air circuit, and water circuit including a shunt tank
- The document contains individual part numbers, descriptions, and quantities for each section.
This document lists contact information for obtaining Caterpillar equipment spare parts manuals. It provides a list of over 200 different Caterpillar machinery models and attachments along with their specific spare parts manuals available for download. The contact listed is for obtaining the manuals.
Caterpillar cat dp25 k fc forklift lift trucks service repair manual sn:et18b...jkskjdkm
This service manual provides information for servicing Caterpillar lift trucks ranging from 1.5 to 3.5 tons. It covers models GP15K through GP35K and DP15K through DP35K, which have Mitsubishi gasoline or diesel engines. The manual includes safety instructions and provides vehicle dimensions, specifications, and identification information for the chassis and mast models.
This document is a notice of revision for the operation and maintenance manuals for motor grader models GD555-5, GD655-5, and GD675-5. It lists the revised pages for the 6th revision of the manuals, indicating which pages should be replaced, added, or discarded. A total of 236 pages across several sections of the manuals are being revised in this update.
- The document provides removal and installation instructions for various engine components including the timing chain, oil pan, cylinder head, and engine.
- Removal of the timing chain requires draining coolant and removing various belts, hoses, wires and covers to access the timing chain components.
- Oil pan removal involves draining oil, removing mounting bolts and using a special tool to separate the oil pan from the engine block.
- Cylinder head removal requires removing additional parts like the intake manifold, spark plugs and distributor after setting the piston to top dead center.
Jcb 540 170 load control (supplement) service repair manualjkmsedopl
The LCS load control system provides protection against tipping forward by progressively reducing boom lowering and tilt functions as stability limits are approached. It has two modes - Load Control mode, which is automatic, and Ground Work mode, which functions like a standard LMI. In Load Control mode, boom lowering and tilt are derated, while extend functions normally until the limit. Once reached, lowering, tilting, crowding and dumping are prevented to avoid further instability. Boom lift and retract allow load retrieval. The system uses LED indicators and switches to monitor stability and select modes.
New Holland CSX 7080 D660 Combine parts catalog PartCatalogs Net
The document provides an overview of parts for a CSX7080 D660 combine harvester, including:
- Identification plates, filters, belts, and a code table
- An engine pictorial overview and complete engine part listing
- Engine equipment such as the fuel tank, supports, pipe lines, and rotary screen shafts
- Coolers, air circuit, and water circuit including a shunt tank
- The document contains individual part numbers, descriptions, and quantities for each section.
This document lists contact information for obtaining Caterpillar equipment spare parts manuals. It provides a list of over 200 different Caterpillar machinery models and attachments along with their specific spare parts manuals available for download. The contact listed is for obtaining the manuals.
Caterpillar cat dp25 k fc forklift lift trucks service repair manual sn:et18b...jkskjdkm
This service manual provides information for servicing Caterpillar lift trucks ranging from 1.5 to 3.5 tons. It covers models GP15K through GP35K and DP15K through DP35K, which have Mitsubishi gasoline or diesel engines. The manual includes safety instructions and provides vehicle dimensions, specifications, and identification information for the chassis and mast models.
This document is a notice of revision for the operation and maintenance manuals for motor grader models GD555-5, GD655-5, and GD675-5. It lists the revised pages for the 6th revision of the manuals, indicating which pages should be replaced, added, or discarded. A total of 236 pages across several sections of the manuals are being revised in this update.
- The document provides removal and installation instructions for various engine components including the timing chain, oil pan, cylinder head, and engine.
- Removal of the timing chain requires draining coolant and removing various belts, hoses, wires and covers to access the timing chain components.
- Oil pan removal involves draining oil, removing mounting bolts and using a special tool to separate the oil pan from the engine block.
- Cylinder head removal requires removing additional parts like the intake manifold, spark plugs and distributor after setting the piston to top dead center.
The document contains a list of 978 diagnostic trouble codes for a machine, including the code, description, machine reaction, and extended fault text for each code. Common codes include issues with the rail pressure control system, injectors, sensors for intake pressure and temperature, fuel and oil temperature, and turbocharger overboost. The codes trigger reactions like torque reduction, delayed engine stop, or limp home mode.
This repair manual contains information on repairing and checking various systems of heavy machinery, including the injection system, transmission, rear axle, front axle, and hydraulic and electronic components. It includes descriptions, operation details, diagrams, specifications, removal and installation instructions, and measurement and checking points for troubleshooting. The manual is divided into chapters that cover specific mechanical, hydraulic and electronic systems and components.
This document provides a wiring diagram for an anti-lock braking system (ABS) with vehicle stability control for a vehicle made by TMC. It includes a list of components, their connections and pinouts. Key components include ECUs, sensors for wheel speed, steering angle, yaw rate and other variables. The diagram shows the interconnections between these components and their related power and ground connections.
2012 ARCTIC CAT PROWLER HDX ROV Service Repair Manualplopoi drert
This is the Highly Detailed factory service repair manual for the2012 ARCTIC CAT PROWLER HDX ROV, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2012 ARCTIC CAT PROWLER HDX ROV Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Maintenance
Engine / Transmission
Fuel / Lubrication / Cooling
Electrical System
Drive System
Suspension
Steering / Frame / Controls
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2012 ARCTIC CAT PROWLER HDX ROV Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
YAMAHA F50AET OUTBOARD Service Repair Manual L: 421626-hkksejkdmm
This is the Highly Detailed factory service repair manual for theYAMAHA F50AET OUTBOARD, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA F50AET OUTBOARD Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General information
Specifications
Periodic checks and adjustment
Fuel system
Power unit
Lower unit
Bracket unit
Electrical systems
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA F50AET OUTBOARD Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
MITSUBISHI FG55N FORKLIFT TRUCKS Service Repair Manual SN: EF33C-80001-UPjsemkdm ujsekmm
This is the Highly Detailed factory service repair manual for theMITSUBISHI FG55N FORKLIFT TRUCKS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MITSUBISHI FG55N FORKLIFT TRUCKS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis and Mast: Foreword
Chassis and Mast: General Information
Chassis and Mast: Cooling System
Chassis and Mast: Electrical System
Chassis and Mast: Electrical Schematics
Chassis and Mast: Controllers
Chassis and Mast: Power Train
Chassis and Mast: Power shift Transmission
Chassis and Mast: Front Axle and Reduction Differential
Chassis and Mast: Rear Axle
Chassis and Mast: Brake System
Chassis and Mast: Steering System
Chassis and Mast: Hydraulic System
Chassis and Mast: Mast and Forks
Chassis and Mast: Service Data
Engine: TB45 Gasoline: Foreword
Engine: TB45 Gasoline: General Information
Engine: TB45 Gasoline: Tune Up
Engine: TB45 Gasoline: Mechanical
Engine: TB45 Gasoline: Lubrication
Engine: TB45 Gasoline: Cooling System
Engine: TB45 Gasoline: Control
Engine: TB45 Gasoline: Fuel System
Engine: TB45 Gasoline: Electrical System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMITSUBISHI FG55N FORKLIFT TRUCKS Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document provides information for diagnosing electrical failures, including performing efficient diagnosis, simulating failure conditions, handling electrical components safely, and checking connectors. Key steps include obtaining details on the failure, inspecting for physical issues, using diagrams to determine involved circuits, repairing or replacing components, and verifying the system works properly under all conditions. Failure simulations include tests for vehicle vibration, heat, freezing, water intrusion, electrical load changes, and cold/hot starts.
El documento habla sobre un sistema eléctrico de la marca Howo. En pocas palabras, el texto se refiere a un sistema eléctrico de una determinada marca, sin proporcionar más detalles sobre sus características o especificaciones.
O documento fornece informações técnicas sobre motores diesel, incluindo suas características, componentes e sistemas de freio motor. São descritas as especificações de dois motores Euro III e Euro V, assim como suas aplicações em diferentes veículos.
YALE B875 GDP050VX LIFT TRUCK Service Repair Manualjkmdm eksmd
This is the Highly Detailed factory service repair manual for theYALE B875 GDP050VX LIFT TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YALE B875 GDP050VX LIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Frame
Operator's cab
Gm 2.4l engine repair
Mazda fe and f2 engines
Y anmar diesel engines
Cooling system
Lpg fuel system (gm)
Gasoline fuel system gm 2.4l engine
Gasoline fuel system (mazda)
Gasoline fuel system mazda 2.0l and 2.2l 2007 emission compliant engines
Lpg fuel system mazda 2.0l and 2.2l 2007 emission compliant engines
1 and 2-speed powershift transmission repair
Single speed powershift aluminum transmission repair
Single speed powershift aluminum chain drive transmission
Powershift transmission repair
Drive axle - dry brake
Drive axle (wet brake)
Steering axle
Brake system
Hydraulic gear pump
Hydraulic cleanliness procedures
Main control valve
Cylinder repair (mast s/n a551, a555, a559, a661, a662, a663, a66, b507,
B508, b509, b551, b555, b559, b562, b563, b564, b661, b662, b663, c515,
C551, c555, c559, d507, d508, d509, d515, d562, d563, d564, e509, and e564)
Cylinder repair (mast s/n f507, f508, f562, f563)
Wire harness repair
User interface
Electrical system
Electrical system mazda 2.0l and 2.2l 2007 emission compliant engines
Mast repairs (s/n a551, a555, a559, a661, a662, a663, a664, b507, b508,
B509, b551, b555, b559, b562, b563, b564, b661, b662, b663, c515, c551,
C555, c559, d507, d508, d509, d515, d562, d563, d564, e509, and e564)
Mast repair (s/n f507, f508, f562, f563)
Metric and inch (sae) fasteners
Calibration procedures
Periodic maintenance
Capacities and specifications
Diagrams
Diagrams and schematics
Diagnostic troubleshooting manual
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYALE B875 GDP050VX LIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Jcb 8035 zts compact excavator service repair manual sn 1230500fujsjfskekmm
This document provides information about identifying JCB machines, standard torque settings for fasteners, and service tools and consumables. It discusses identification plates, product identification numbers, engine identification numbers, and ROPS/TOPS certification labels. It also includes tables listing torque settings for UNF and metric grade fasteners under lubricated and unlubricated conditions. Finally, it provides an index of service tools by component and a list of recommended sealing and retaining compounds.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It describes:
- Draining the coolant from the cooling system before removal
- Using a strap wrench to remove the engine oil filter
- Disconnecting hoses and removing bolts to take off the oil filter base and oil seal
- Removing the engine oil cooler and gasket
The installation steps are provided in reverse order.
Jcb 3155 fastrac service repair manual sn:00642001 00643010kjskemmd
This document is a service manual for Fastrac tractors that provides information on machine identification, torque settings, service tools, and maintenance procedures. It contains 17 sections that cover general information, safety, routine maintenance, optional equipment, and specific components like the body, electrics, hydraulics, transmission, brakes, steering, and engine. Torque settings are provided for zinc plated and Dacromet fasteners. Dacromet fasteners have lower torque values than zinc plated fasteners due to their lubricated surface. Cross references between sections are made using bold subject titles and section names.
Blisks are single engine components that combine a rotor disk and blades into one piece, either through casting, machining, or welding. Blisks replace separate disks and blades in turbomachinery. They provide advantages such as eliminating the need to attach blades to disks, decreasing the number of components, reducing drag, and increasing compression efficiency. Additionally, removing the dovetail attachment of traditional blades eliminates a common source for cracks to form.
Caterpillar cat 323 d l excavator (prefix wgc) service repair manual (wgc0000...dhjfjkmmmde
The document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar C6.4 engine. It describes the required tools and safety precautions. The procedure involves using a valve spring compressor tool to compress the valve spring and remove the retainer, spring, and valve keeper. Installation is the reverse process of cleaning components and lubricating the valve stem before reinstalling the valve keeper, spring, and retainer while compressing the spring with the tool.
Este documento fornece instruções para serviços em motores Scania de 12 litros, incluindo remoção e instalação do motor, cabeçote do cilindro, folgas das válvulas, pistões, engrenagens e sistema de lubrificação. Fornece especificações técnicas e lista ferramentas necessárias.
This document provides information about inspecting and repairing an automatic transaxle. It begins with safety precautions for working with compressed air and cleaning fluids. It describes the components and systems of the automatic transaxle in detail. Troubleshooting procedures are outlined in a step-by-step process beginning with verifying the customer's problem and ending with a confirmation test after repairs. Road tests and mechanical system tests are described to check the performance of the transaxle.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct72 f2887-ct72f4906)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional items like springs, supports and stops are also listed. The parts are specified for different engine models denoted by homologation types.
The document contains a list of 978 diagnostic trouble codes for a machine, including the code, description, machine reaction, and extended fault text for each code. Common codes include issues with the rail pressure control system, injectors, sensors for intake pressure and temperature, fuel and oil temperature, and turbocharger overboost. The codes trigger reactions like torque reduction, delayed engine stop, or limp home mode.
This repair manual contains information on repairing and checking various systems of heavy machinery, including the injection system, transmission, rear axle, front axle, and hydraulic and electronic components. It includes descriptions, operation details, diagrams, specifications, removal and installation instructions, and measurement and checking points for troubleshooting. The manual is divided into chapters that cover specific mechanical, hydraulic and electronic systems and components.
This document provides a wiring diagram for an anti-lock braking system (ABS) with vehicle stability control for a vehicle made by TMC. It includes a list of components, their connections and pinouts. Key components include ECUs, sensors for wheel speed, steering angle, yaw rate and other variables. The diagram shows the interconnections between these components and their related power and ground connections.
2012 ARCTIC CAT PROWLER HDX ROV Service Repair Manualplopoi drert
This is the Highly Detailed factory service repair manual for the2012 ARCTIC CAT PROWLER HDX ROV, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.2012 ARCTIC CAT PROWLER HDX ROV Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Periodic Maintenance
Engine / Transmission
Fuel / Lubrication / Cooling
Electrical System
Drive System
Suspension
Steering / Frame / Controls
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have2012 ARCTIC CAT PROWLER HDX ROV Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
YAMAHA F50AET OUTBOARD Service Repair Manual L: 421626-hkksejkdmm
This is the Highly Detailed factory service repair manual for theYAMAHA F50AET OUTBOARD, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YAMAHA F50AET OUTBOARD Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General information
Specifications
Periodic checks and adjustment
Fuel system
Power unit
Lower unit
Bracket unit
Electrical systems
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYAMAHA F50AET OUTBOARD Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
MITSUBISHI FG55N FORKLIFT TRUCKS Service Repair Manual SN: EF33C-80001-UPjsemkdm ujsekmm
This is the Highly Detailed factory service repair manual for theMITSUBISHI FG55N FORKLIFT TRUCKS, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.MITSUBISHI FG55N FORKLIFT TRUCKS Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Chassis and Mast: Foreword
Chassis and Mast: General Information
Chassis and Mast: Cooling System
Chassis and Mast: Electrical System
Chassis and Mast: Electrical Schematics
Chassis and Mast: Controllers
Chassis and Mast: Power Train
Chassis and Mast: Power shift Transmission
Chassis and Mast: Front Axle and Reduction Differential
Chassis and Mast: Rear Axle
Chassis and Mast: Brake System
Chassis and Mast: Steering System
Chassis and Mast: Hydraulic System
Chassis and Mast: Mast and Forks
Chassis and Mast: Service Data
Engine: TB45 Gasoline: Foreword
Engine: TB45 Gasoline: General Information
Engine: TB45 Gasoline: Tune Up
Engine: TB45 Gasoline: Mechanical
Engine: TB45 Gasoline: Lubrication
Engine: TB45 Gasoline: Cooling System
Engine: TB45 Gasoline: Control
Engine: TB45 Gasoline: Fuel System
Engine: TB45 Gasoline: Electrical System
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveMITSUBISHI FG55N FORKLIFT TRUCKS Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This document provides information for diagnosing electrical failures, including performing efficient diagnosis, simulating failure conditions, handling electrical components safely, and checking connectors. Key steps include obtaining details on the failure, inspecting for physical issues, using diagrams to determine involved circuits, repairing or replacing components, and verifying the system works properly under all conditions. Failure simulations include tests for vehicle vibration, heat, freezing, water intrusion, electrical load changes, and cold/hot starts.
El documento habla sobre un sistema eléctrico de la marca Howo. En pocas palabras, el texto se refiere a un sistema eléctrico de una determinada marca, sin proporcionar más detalles sobre sus características o especificaciones.
O documento fornece informações técnicas sobre motores diesel, incluindo suas características, componentes e sistemas de freio motor. São descritas as especificações de dois motores Euro III e Euro V, assim como suas aplicações em diferentes veículos.
YALE B875 GDP050VX LIFT TRUCK Service Repair Manualjkmdm eksmd
This is the Highly Detailed factory service repair manual for theYALE B875 GDP050VX LIFT TRUCK, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.YALE B875 GDP050VX LIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Frame
Operator's cab
Gm 2.4l engine repair
Mazda fe and f2 engines
Y anmar diesel engines
Cooling system
Lpg fuel system (gm)
Gasoline fuel system gm 2.4l engine
Gasoline fuel system (mazda)
Gasoline fuel system mazda 2.0l and 2.2l 2007 emission compliant engines
Lpg fuel system mazda 2.0l and 2.2l 2007 emission compliant engines
1 and 2-speed powershift transmission repair
Single speed powershift aluminum transmission repair
Single speed powershift aluminum chain drive transmission
Powershift transmission repair
Drive axle - dry brake
Drive axle (wet brake)
Steering axle
Brake system
Hydraulic gear pump
Hydraulic cleanliness procedures
Main control valve
Cylinder repair (mast s/n a551, a555, a559, a661, a662, a663, a66, b507,
B508, b509, b551, b555, b559, b562, b563, b564, b661, b662, b663, c515,
C551, c555, c559, d507, d508, d509, d515, d562, d563, d564, e509, and e564)
Cylinder repair (mast s/n f507, f508, f562, f563)
Wire harness repair
User interface
Electrical system
Electrical system mazda 2.0l and 2.2l 2007 emission compliant engines
Mast repairs (s/n a551, a555, a559, a661, a662, a663, a664, b507, b508,
B509, b551, b555, b559, b562, b563, b564, b661, b662, b663, c515, c551,
C555, c559, d507, d508, d509, d515, d562, d563, d564, e509, and e564)
Mast repair (s/n f507, f508, f562, f563)
Metric and inch (sae) fasteners
Calibration procedures
Periodic maintenance
Capacities and specifications
Diagrams
Diagrams and schematics
Diagnostic troubleshooting manual
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveYALE B875 GDP050VX LIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Jcb 8035 zts compact excavator service repair manual sn 1230500fujsjfskekmm
This document provides information about identifying JCB machines, standard torque settings for fasteners, and service tools and consumables. It discusses identification plates, product identification numbers, engine identification numbers, and ROPS/TOPS certification labels. It also includes tables listing torque settings for UNF and metric grade fasteners under lubricated and unlubricated conditions. Finally, it provides an index of service tools by component and a list of recommended sealing and retaining compounds.
This document provides instructions for removing and installing the engine oil filter base and oil cooler on a Caterpillar C9 Industrial Engine. It describes:
- Draining the coolant from the cooling system before removal
- Using a strap wrench to remove the engine oil filter
- Disconnecting hoses and removing bolts to take off the oil filter base and oil seal
- Removing the engine oil cooler and gasket
The installation steps are provided in reverse order.
Jcb 3155 fastrac service repair manual sn:00642001 00643010kjskemmd
This document is a service manual for Fastrac tractors that provides information on machine identification, torque settings, service tools, and maintenance procedures. It contains 17 sections that cover general information, safety, routine maintenance, optional equipment, and specific components like the body, electrics, hydraulics, transmission, brakes, steering, and engine. Torque settings are provided for zinc plated and Dacromet fasteners. Dacromet fasteners have lower torque values than zinc plated fasteners due to their lubricated surface. Cross references between sections are made using bold subject titles and section names.
Blisks are single engine components that combine a rotor disk and blades into one piece, either through casting, machining, or welding. Blisks replace separate disks and blades in turbomachinery. They provide advantages such as eliminating the need to attach blades to disks, decreasing the number of components, reducing drag, and increasing compression efficiency. Additionally, removing the dovetail attachment of traditional blades eliminates a common source for cracks to form.
Caterpillar cat 323 d l excavator (prefix wgc) service repair manual (wgc0000...dhjfjkmmmde
The document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar C6.4 engine. It describes the required tools and safety precautions. The procedure involves using a valve spring compressor tool to compress the valve spring and remove the retainer, spring, and valve keeper. Installation is the reverse process of cleaning components and lubricating the valve stem before reinstalling the valve keeper, spring, and retainer while compressing the spring with the tool.
Este documento fornece instruções para serviços em motores Scania de 12 litros, incluindo remoção e instalação do motor, cabeçote do cilindro, folgas das válvulas, pistões, engrenagens e sistema de lubrificação. Fornece especificações técnicas e lista ferramentas necessárias.
This document provides information about inspecting and repairing an automatic transaxle. It begins with safety precautions for working with compressed air and cleaning fluids. It describes the components and systems of the automatic transaxle in detail. Troubleshooting procedures are outlined in a step-by-step process beginning with verifying the customer's problem and ending with a confirmation test after repairs. Road tests and mechanical system tests are described to check the performance of the transaxle.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct72 f2887-ct72f4906)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional items like springs, supports and stops are also listed. The parts are specified for different engine models denoted by homologation types.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct71 f0105-ct71f0143)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional items like springs, supports and stops are also listed. The parts are specified for different engine models denoted by homologation types.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct42 f2556-ct42f4267)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional parts like springs, supports and stops are also listed that need to be ordered. The parts are specified for different engine models identified by homologation types.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct41 f0373-ct41f0975)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional items like springs, supports and stops are also listed. The parts are specified for different engine models denoted by homologation types.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct22 f0981-ct22f1583)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional items like springs, supports and stops are also listed. The parts are specified for different engine models denoted by homologation types.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct21 f0242-ct21f0362)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional items like springs, supports and stops are also listed. The parts are specified for different engine models denoted by homologation types.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct12 f0189-ct12f0261)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional parts like springs, supports and stops are also listed that need to be ordered. The parts are specified for different engine models identified by homologation types.
Claas ceres 340 310 x tractor parts catalogue manual (sn ct11 f0151-ct11f0203)udfjjdjkksmmd
This document contains parts lists and specifications for engines. It lists part numbers, descriptions, dimensions and quantities for components of engines including the crankcase, timing case, and complete engines. Additional items like springs, supports and stops are also listed. The parts are specified for different engine models denoted by homologation types.
Claas ceres 95 65 x tractor parts catalogue manual (sn ct72 f0050-ct72f2886)udfjjdjkksmmd
This document contains parts lists and specifications for engine components. It includes 6 pages describing parts for crankcases, timing cases, and complete engines. Each part is listed with its number, description, dimensions, quantity, and any additional conditions or specifications. The parts support various engine homologation types.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
1. RETURN TO: MAIN INDEX
RETURN TO: SERVICE MANUAL INDEX
GENERAL
ENGINE
TORQUE CONVERTER
DIFFERENTIAL
FRONT AXLE
REAR AXLE
STEERING
BRAKE
BODY
MATERIAL HANDLING SYSTEM
APPENDIX
FGC/FDC33-45
2. PREFACE
This manual covers the inspection, adjustment and repair procedures mainly for the overhaul of
the engine, chassis and material handling system of the Toyota Forklift FDC33, 35, 40, 45
Series, FGC33, 35, 40, 45 Series.
You are encouraged to read this manual to make the most of the outstanding performance and
durability features of these forklifts and to perform proper servicing to maintain them in tip-top
running condition.
This repair manual contains the latest information available as of DECEMBER, 1982. For any
changes thereafter, you are requested to consult the Toyota Parts and Service News.
The titles of the related repair manuals are as follows:
TOYOTA 2H ENGINE REPAIR MANUAL
TOYOTA 2F ENGINE REPAIR MANUAL
TOYOTA MOTOR CORPORATION
-2-
4. 0-3
Every model is provided with the power steering and power brake as the standard equipment.
Every torque converter model is provided with the forward 2-speed and backward 1-speed torque-converter as the standard
equipment.
VEHICLE MODELS
o
o
-7-
8. 0-7
STANDARD BOLT & NUT TIGHTENING TORQUE JUDGING PROCESS
Standard bolt and nut tightening torque is not indicated, therefore tightening torque must be judged as
below;
1. Find out the type of the bolt from the list below.
Then, find the bolt tightening torque from the sable.
2. The nut tightening torque can be judged from the bolt type. (See the table.)
LIST OF BOLT TYPES AND STRENGTH
-11-
9. REMOVAL
Remove the rear toe board.
(1) Set bolts
(2) Rear to board
Remove the engine hood.
(1) Remove the catch.
(2) Disconnect the engine hood stay.
(3) Disconnect the seat stay sub-assembly
At the seat side.
(4) Engine hood hinge set bolts
(5) Engine hood (with driver seat)
Remove the radiator cover.
(1) Set bolts
(2) Radiator cover.
Remove the air cleaner assembly with
hose.
(1) Set bolts
(2) Air cleaner assemlbly with hose
-31-
Fig. 1-8 Removing the air cleaner assembly
Fig. 1-5 Removing the rear toe board
Fig. 1-6 Removing the engine hood
Fig. 1-7 Removing the radiator cover
1.
2.
3.
4.
10. 1-6
Remove the battery.
(1) Battery cables
(2) Battery cap
(3) Battery
(4) Set bolts
(5) Battery case
Cautions:
Battery cables must be removed from
the negative side first.
2 batteries are used in the diesel model
while one battery is used in the
gasoline model.
Disconnect the wiring.
(1) Line to the alternator
(2) Line to glow plugs (diesel model)
(3) Line to the distributor and ignition
coil (gasoline model)
(4) Line to the starter
Remove the pipes and wires.
(1) Fuel pipe
(2) Accelerator wire
NOTE:
Remove the accelerator wire with the
accelerator wire bracket for the diesel
model.
(3) Choke wire (gasoline model)
-32-
Fig. 1-12 Discopnnecting the wire and pipes
Fig. 1-11 Disconnecting the lines to ignition coil
Fig. 1-10 Disconnecting the line to the alternator
Fig. 1-9 Removing the battery
5.
6.
7.
11. Drain the coolant.
(1) Radiator draining
(2) Engine draining
Remove the balance weight.
(1) Put the wire around the balance
weight.
(2) Set bolts
(3) Balance weight
Reference: Weight of balance weight
FDC/FGC33 series Approx. 1,840kg
(4048 lb)
FDC/FGC35 series Approx. 2,190kg
(4818 lb)
FDC/FGC40 series Approx. 2,510kg
(5522 lb)
FDC/FGC45 series Approx. 2,890kg
(6358 lb)
Remove the muffler assembly.
(1) Exhaust pipe connector
(2) Muffler set bolts
(3) Muffler assembly
Remove the radiator assembly and the fan
shroud.
(1) Disconnect the inlet and outlet
hoses.
(2) Disconnect the torque converter
cooler hoses (2 pcs).
(3) Set bolts
(4) Radiator assembly, fan shroud
-33-
Fig. 1-16 Removing the radiator assembly
Fig. 1-13 Draining the coolant
Fig. 1-14 Removing the balance weight
Fig. 1-15 Removing the muffler assembly
8.
9.
10.
11.
1-7
12. 1-8
Disconnect the oil pump.
Diesel Model
(1) Oil pump set bolts.
(2) Disconnect the oil pump.
Note:
Disconnect the oil pump from the engine
with the hoses attached.
Gasoline Model
(1) Oil pump drive shaft set bolts
(2) Disconnect the drive shaft from the
engine.
Remove the fan sub-assy.
(1) Loosen the fan belt.
(2) Fan set bolt
(3) Fan sub-assy
Slighty lift the engine.
[Using SST]
For lifting with a hoist
SST 09010-20110-71
For lifting with a forklift
SST 09020-20110-71
SST 09090-04000
Caution:
SST must be inserted from the back
side of the vehicle.
-34-
Fig. 1-20 Slightly lifting the engine
Fig. 1-17 Disconnecting the oil pump (2H)
Fig. 1-18 Disconnecting the oil pump drive
Fig. 1-19 Removing the Fan sub-assy
12.
13.
14.
13. Remove the engine mounting set nuts.
Place a stand under the torque converter
case.
Remove the torque converter case cover.
Remove the flexible plate set bolts.
(1) Set bolts (6pcs.)
Note:
Turn the crankshaft pulley set bolt when
rotating the flywheel.
Disconnect the torque coverter and the
engine.
(1) Set bolts
(2) Disconnect the torque converter and
the engine.
-35-
Fig. 1-24 Disconnecting the engine
Fig. 1-21 Removing the mounting set nuts
Fig. 1-22 Supporting the torque converter case
with a stand
Fig. 1-23 Removing the flexible plate set bolts
15.
16.
17.
18.
19.
1-9
14. 1-10
Lift the engine and remove it from the
vehicle.
Caution:
Be careful so as not to damage the oil
pump.
Make sure that all wires and pipes are
disconnected.
Carefully remove the engine so as not
to strike it against the steering wheel.
INSTALLATION
Installation is the reverse of the removal pro-
cedure.
-36-
Fig. 1-25 Removing the engine
Caution:
Place the oil pump at a place to allow easy installation before fitting the engine. (Diesel model)
Slightly turn the engine crank shaft when spline alignment with the engine during oil pump
installation is not obtained.
Purge the air in the fuel system. (Diesel model)
Connect the negative battery terminal after confirming that the electric wiring is correct.
Check the coolant and engine oil. If insufficient, replenish them before making engine adjustment.
15. 1-11
ENGINE ADJUSTMENT
(DIESEL MODEL)
Idling speed adjustment
(1) Warm up the engine.
(Coolant temperature: up to 75 ~
85°C (167 ~ 135°F).)
(2) Set the engine tachometer.
(3) Turn the adjusting screw to obtain
the specified idling speed.
Idling speed: 650 ± 50 rpm
Maximum no-load rpm adjustment
(1) Warm up the engine.
(2) Set the engine tachometer.
(3) Fully depress the accelerator pedal.
(4) Turn the adjusting screw to obtain
the specified maximum no-load rpm.
Maximum no-load rpm:
2350+0
100
rpm
Operate the material handling levers, and
measure the engine rpm for full relief.
Engine rpm down for full relief: Within
250 rpm
If the decrement exceeds 250 rpm, adjust
the engine and injection pump.
-37-
Fig. 1-28 Adjusting the maximum no-load rpm
Fig. 1-29 Measuring the engine rpm for full relief
Fig. 1-26 Setting the engine tachometer
Fig. 1-27 Adjusting the idling speed
1.
2.
3.
16. 1-12
ENGINE ADJUSTMENT
(GASOLINE MODEL)
Idling speed adjustment
(1) Warm up the engine.
(Coolant temperatura: up to 75 ~
85°C (167 ~ 185°F))
(2) Set the engine tachometer.
(3) Turn the adjusting screw to obtain
the specified idling speed.
Clockwise turn: Increases the idling
rpm.
Counterclockwise turn: Decreases
the idling rpm.
Idling speed: 650 ± 50 rpm
Maximum no-load rpm adjustment
(1) Warm up the engine.
(2) Set the engine tachometer.
(3) Fully depress the accelerator pedal
and measure the rpm.
Maximum no-load rpm: 2350 ± 50
rpm
(4) Operate the material handling leve-
rs, and measure the engine rpm for
full relief.
Engine rpm down for full relief:
Within 300 rpm
(5) If the measured rpm is not within the
specified range, adjust the governor
to obtain the most stabilized rpm
within the specified range and
minimize the decrement for full
relief.
Turn the screw with the wrench
attached to the cap, and adjust the
rpm by turning the bush with the
SST.
After adjustment, install and seal the
cap.
SST 09010-30150-71
AIR GOVERNOR ADJUSTMENT
Fig. 1-32 Adjusting the air governor
-38-
Fig. 1-30 Adjusting the idling speed
Fig. 1-31 Measuring the engine rpm for full relief
1.
2.
17. 1-13
ACCELERATOR PEDAL
ACCELERATOR PEDAL
ADJUSTMENT
Adjust the length of connecting rod (1) to
obtain the following height of the
accelerator pedal:
Accelerator pedal height: 128mm (5.0 in.)
(from the pad top end to the toe board)
Adjust the height of stopper bolt (2).
(1) Gradually depress the accelerator
pedal. When the engine side link
first comes into contact with the
stoper, adjust the clearance bet-
ween stopper bolt (2) and the pedal
(so that excessive wire elongation or
link flexure will not occur).
(2) Lock the lock nut (3).
-39-
Fig. 1-42 Adjusting the Accelerator pedal height
1. Pedal pad
2. Accelerator pedal
3. Bushing
4. Pin
5. Pedal bracket
6. Connecting rod
7. Arm bracket
8. Rod end
9. Link arm
10. Pin
11. Tension Spring
1.
2.
Fig. 1-33 Accelerator pedal components
18. 1-14
AIR CLEANER
INSPECTION AND CLEANING
Open the engine hood.
Remove the air cleaner cover and take out
the element.
Inspect and clean the element.
(1) Damage and deformation of pleats
(2) Clean the element with compressed
air.
-40-
Fig. 1-37 Cleaning the air cleaner
1. Clamp 6. Air cleaner assy
2. Air cleaner hose 7. Air cleaner cover
3. Air cleaner connector 8. Air cleaner element
4. Gasket 9. Air cleaner case
5. Band
Fig. 1-36 Removing the air cleaner
1.
2.
3.
Fig. 1-35 Air cleaner components
19. 1-15
RADIATOR
Fig. 1-38 Radiator components
COOLANT AND ANTIFREEZE VOLUMES
RADIATOR REMOVAL AND
INSTALLATION
Drain the coolant.
(1) Radiator draining
(2) Engine draining
-41-
Fig. 1-39 Draining the coolant
1. Radiator
2. Radiator cap
3. Fan shroud
4. Duct sub-assy
5. Fan sub-assy
6. Radiator outlet hose
7. Radiator inlet hose
8. Hase clamp
9. “V” belt
10. Drain cook sub-assy
11. Packing
12. Mounting rubber
1.
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. 1-16
Remove the balance weight.
(1) Put the wire around the balance
weight.
(2) Set bolts (2pcs)
(3) Balance weight
Reference: Weight of balance weight
FDC/FGC33 series ..... Approx. 1,840kg
(4,048 lb)
FDC/FGC35 series ..... Approx. 2,190kg
(4,818 lb)
FDC/FGC40 series ..... Approx. 2,510kg
(5,522 lb)
FDC/FGC45 series ..... Approx. 2,890kg
(6,358 lb)
Remove the muffler assembly.
(1) Exhaust pipe connector
(2) Muffler set bolts
(3) Muffler assembly
Remove the radiator assembly.
(1) Disconnect the inlet and outlet
hoses.
(2) Disconnect the torque converter
cooler hoses. (2 pcs)
(3) Set boits
(4) Radiator assembly
Cautions.
Remove the radiator carefully to avoid
damage to the fins.
NOTE:
Pour coolant into the radiator. Start the
engine, then add more coolant to the top.
-42-
Fig. 1-42 Removing the radiator assembly
Fig. 1-40 Removing the balance weight
Fig. 1-41 Removint the muffler assembly
22. MUFFLER
MUFFLER REMOVAL AND
INSTALLATION
Remove the balance weight.
(1) Put the wire around the balance
weight.
(2) Set bolts (2pcs)
(3) Balance weight
Reference: Weight of balance weight
FDC/FGC33 series ..... Approx. 1,840kg
(4,048 lb)
FDC/FGC35 series ..... Approx. 2,190kg
(4,818 lb)
FDC/FGC40 series ..... Approx. 2,510kg
(5,522 lb)
FDC/FGC45 series ..... Approx. 2,890kg
(6,358 lb)
Remove the muffler assembly.
(1) Exhaust pipe connector
(2) Muffler set bolts
(3) Muffler assembly
-43-
Fig. 1-45 Removing the muffler assembly
1. Muffler assy 4. Clamp
2. Exhaust pipe sub-assy 5. Insulator
3. Gasket
2F Engine 2H Engine
Fig. 1-44 Removing the balance weight
Fig. 1-43 Muffler components
1-17
23. 1-18
BATTERY
Fig. 1-46 Battery components (2H)
Fig. 1-47 Battery components (2F)
SPECIFICATION
INSPECTION
Battery fluid level
Battery fluid specific gravity
1.260 (at 20°C at full charge)(68°F)
Battery terminal staining
Loosening of cable connections
-44-
Fig. 1-48 Inspecting the battery
1. Battery starter cable
2. Battery connector cable
3. Battery cap
4. Battry earth cable
5. Bolt
6. Battery case
7. Battrey
8. Battery case bracket
9. Grommet
10. Bracket
1. Battery starter cable
2. Battery earth cable
3. Battery cap
4. Battery
5. Battery case
6. Bolt
7. Battery case bracket
8. Grommet
9. Bracket
1.
2.
3.
4.