TOPBAND 500kW/1MWh ESS 40FT
•
0 likes•14 views
This document provides an overview of an integrated battery solution housed within a shipping container. It includes: 1) Details on the battery racks, modules, and management systems, including specifications for voltage, capacity, and weights. 2) Descriptions of the power conversion systems, HVAC, fire safety, and monitoring systems integrated within the container. 3) Diagrams of the electrical structure and communication between components like the battery management units, main battery management system, and power conversion system. 4) Images and specifications for the shipping container that houses the entire battery and ancillary systems.
Report
Share
Report
Share
Recommended
IFGS-1822TF Industrial Gigabit TP/SFP Combo Ethernet Switch
IFGS-1822TF comes with high-density 16 10/100BASE-TX ports, 2 additional Gigabit copper/SFP combo interfaces and redundant power system. Though it includes robust features designed for industrial Ethernet networks, its Plug and Play makes configuration easy. With the IP30-rated rugged but compact-sized case, it can operate stably under the temperature range from -40 to 75 degrees C and can be installed in any difficult environment without space limitation.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
PROJECT RESPONSIBILITY
This document outlines the engineering, procurement, testing, erection and commissioning responsibilities for all electrical equipment, instruments, and automation systems for utilities auxiliaries equipment in a plant area during a project. It includes responsibilities for transformers, switchgears, drives, UPS systems, bus ducts, motors, compressors, boilers, chillers, coolers, PLC control systems, and various instrumentation like pressure gauges, transmitters, and valves.
Airband prijemnik 220 m hz to 400mhz band
This document describes a simple circuit that can be built to receive communications between aircraft and ground control in the 220MHz to 400MHz frequency band. The circuit uses inexpensive common components like resistors, capacitors, an inductor and transistor. It provides an easy and low-cost way for people to listen to air-ground radio conversations given that radios and scanners to receive these frequency bands can be large, complicated and expensive.
Power vamp 1224ga
This document summarizes a 12/24 volt general aviation battery pack. It provides a peak amperage of 925 and cell capacities of 29 amp-hours at 12 and 24 volts. It measures 290mm x 380mm x 130mm and weighs 27 kilograms. Key features include a built-in 3-stage charger, LED indicator lights, separate leads and clamps for aircraft connections, and auto-selecting 110/220V internal charger.
Siemens bss 70
This document contains abbreviations and acronyms for components and terms related to a base station system, including low noise amplifier, loadable timing generation, local test loop, and transmitter and receiver components.
Reference List (Overseas Market)
The document lists 36 transactions of high voltage equipment from Yangzhou Power Electric Co., Ltd. to customers in various countries between 2008 and 2010. The transactions include products like AC and impulse voltage test equipment, transformers, and reactors. The customers ranged across several countries and industries, including universities and cable manufacturers.
Nexans Euromold 180A High Voltage Air Insulated Bushing
This document provides specifications for an IN-AIR BUSHING type 180A-24P-O for voltages up to 24 kV and currents up to 250A. It is intended for use insulating equipment with air, like dry type transformers. Each bushing is tested for AC withstand and partial discharge prior to shipping. The bushings meet relevant CENELEC, IEC, and industry standards. The document provides ordering instructions, technical characteristics, and dimensional drawings of the bushings and associated mounting rings and clamps.
Ericson Pocket Guide-2014
The document describes several models of temporary power distribution centers from Ericson, including:
1. The TuffTraxx cable protector series which features industrial and extreme duty ratings, protective dividers, and traction tread plate surfacing.
2. The e-Cart Jr. temporary power distribution center which has a NEMA 3R circuit breaker/receptacle enclosure, 15kVA transformer, and GFCI circuit breakers.
3. The Big E Jr. and Big E models which have capacities up to 400 amps, circuit breakers under a rainproof cover, and heavy duty welded frames.
4. The PowerCart series which comes in 60, 100, and 200
Recommended
IFGS-1822TF Industrial Gigabit TP/SFP Combo Ethernet Switch
IFGS-1822TF comes with high-density 16 10/100BASE-TX ports, 2 additional Gigabit copper/SFP combo interfaces and redundant power system. Though it includes robust features designed for industrial Ethernet networks, its Plug and Play makes configuration easy. With the IP30-rated rugged but compact-sized case, it can operate stably under the temperature range from -40 to 75 degrees C and can be installed in any difficult environment without space limitation.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://www.bbcpl.in
PROJECT RESPONSIBILITY
This document outlines the engineering, procurement, testing, erection and commissioning responsibilities for all electrical equipment, instruments, and automation systems for utilities auxiliaries equipment in a plant area during a project. It includes responsibilities for transformers, switchgears, drives, UPS systems, bus ducts, motors, compressors, boilers, chillers, coolers, PLC control systems, and various instrumentation like pressure gauges, transmitters, and valves.
Airband prijemnik 220 m hz to 400mhz band
This document describes a simple circuit that can be built to receive communications between aircraft and ground control in the 220MHz to 400MHz frequency band. The circuit uses inexpensive common components like resistors, capacitors, an inductor and transistor. It provides an easy and low-cost way for people to listen to air-ground radio conversations given that radios and scanners to receive these frequency bands can be large, complicated and expensive.
Power vamp 1224ga
This document summarizes a 12/24 volt general aviation battery pack. It provides a peak amperage of 925 and cell capacities of 29 amp-hours at 12 and 24 volts. It measures 290mm x 380mm x 130mm and weighs 27 kilograms. Key features include a built-in 3-stage charger, LED indicator lights, separate leads and clamps for aircraft connections, and auto-selecting 110/220V internal charger.
Siemens bss 70
This document contains abbreviations and acronyms for components and terms related to a base station system, including low noise amplifier, loadable timing generation, local test loop, and transmitter and receiver components.
Reference List (Overseas Market)
The document lists 36 transactions of high voltage equipment from Yangzhou Power Electric Co., Ltd. to customers in various countries between 2008 and 2010. The transactions include products like AC and impulse voltage test equipment, transformers, and reactors. The customers ranged across several countries and industries, including universities and cable manufacturers.
Nexans Euromold 180A High Voltage Air Insulated Bushing
This document provides specifications for an IN-AIR BUSHING type 180A-24P-O for voltages up to 24 kV and currents up to 250A. It is intended for use insulating equipment with air, like dry type transformers. Each bushing is tested for AC withstand and partial discharge prior to shipping. The bushings meet relevant CENELEC, IEC, and industry standards. The document provides ordering instructions, technical characteristics, and dimensional drawings of the bushings and associated mounting rings and clamps.
Ericson Pocket Guide-2014
The document describes several models of temporary power distribution centers from Ericson, including:
1. The TuffTraxx cable protector series which features industrial and extreme duty ratings, protective dividers, and traction tread plate surfacing.
2. The e-Cart Jr. temporary power distribution center which has a NEMA 3R circuit breaker/receptacle enclosure, 15kVA transformer, and GFCI circuit breakers.
3. The Big E Jr. and Big E models which have capacities up to 400 amps, circuit breakers under a rainproof cover, and heavy duty welded frames.
4. The PowerCart series which comes in 60, 100, and 200
Trading
This document provides a list of annual requirements for various BOS (balance of system) items with descriptions and estimated quantities needed. It includes over 125 different items such as batteries, charge controllers, cables, LED lights, printers, computers, weighing scales, and other electronic equipment. The total estimated annual quantities needed range from tens to tens of thousands of units for each item type. The goal is to estimate procurement needs for the coming year to support various infrastructure and technology systems.
power 6210.pdf
The Power 6210 DC power system supplies -48V DC to Ericsson radio systems and auxiliary equipment. It has a flexible design that allows it to be installed on walls or battery racks. The power unit can connect to multiple battery racks to achieve high battery capacities. It features an LCD display for system monitoring and can be accessed remotely. Detailed installation and configuration instructions are provided for mounting, cabling, grounding, connecting AC power and batteries, installing temperature sensors and configuring alarms.
Vb4 s lateral vacuum circuit breaker
This document provides information on the VB4/S medium-voltage indoor vacuum circuit breaker manufactured by Zhejiang Farady Electric Co., Ltd. The circuit breaker is applicable for three-phase AC power systems from 6kV to 24kV and is used to control and protect electrical equipment. It meets various industry standards. The document provides technical specifications, installation dimensions, and instructions for ordering the circuit breaker.
Polymer Capacitors for Automotive DC to DC Converters
Automotive Infotainment systems demand more from their components. Getting high performance parts found in smartphones with the quality expected of the automotive industry is a challenge.
KEMET's latest technology breakthrough with Low Voltage DC T591 Polymer Capacitors enables them to pass lifetime requirements targeted for Automotive applications.
Additionally there is a roadmap to getting to full AEC-Q200 qualifications with this same technology block.
This paper was presented by KEMET at the 2015 Applied Power Electronic Conference in Charlotte, NC.
Polymer Automotive High Voltage Extensions T598 Series
The document provides information about KEMET events and product offerings for polymer tantalum capacitors. It lists KEMET technical seminars scheduled for October 2018 in various locations in Europe. It also announces KEMET's capacitor simulation tool and online part number search. The document discusses KEMET's existing T591 and T598 polymer tantalum capacitor series that meet various AEC-Q200 qualification tests. It provides the development history and construction of KEMET's polymer tantalum capacitor technology. The document highlights KEMET's new high voltage extensions for the T598 series as the first to market for 12V rail applications. It summarizes evaluations of KEMET capacitors for load dump and ISO pulse testing. The document compares KE
Essential 12 v 100ah spec sheet 09-09-2020 v3
This document provides technical specifications for a 12V 100Ah lithium iron phosphate battery. The battery has a nominal voltage of 12.8V and capacity of 100Ah, for a total energy of 1.28kWh. It can withstand continuous discharge currents of up to 100A and has a cycle life of 2000 cycles at 100% depth of discharge. The battery chemistry is cylindrical lithium iron phosphate and it has dimensions of L330xW172xH219mm and weighs 15.5kg.
Rekoser Inverters Catalog
Rekoser manufactures pure sine wave inverters for solar applications: off-grid, on-grid and hybrid 1 phase and 3 phase.
http://rekoser.com/inverters/
Industrial products
Based on our decades of operations in Indian low voltage switchgear applications it is apparent that Indian industrial conditions are extremely harsh and demanding in nature. We understand the significance and need for a device which seamlessly, effortlessly and reliably delivers the best performance in varied applications.
Aswich Electrical DC Isolation Switch :EDS7 Series DC Isolator
Aswich Electrical :Choose our line of isolation switches that are up to 1500V and properly disengaged power when toggled. With a patented arc-extinguishing chamber, we guarantee better solar DC safety.
New VD4-Rockwill
This document provides technical specifications and parameters for ROCKWILL HV vacuum circuit breakers. It includes:
1) Product features such as epoxy resin material and contact springs from German manufacturers.
2) Dimensions and ratings for various circuit breaker models ranging from 630A to 4000A.
3) Performance specifications covering insulation levels, breaking capacities, speeds, lifetime, and test requirements.
Polymer mlcc replacement option external
The document discusses potential alternatives to MLCC capacitors for automotive applications given supply chain issues. It outlines key consideration factors for designers such as voltage, ripple current, temperature requirements, and footprint. Ta polymer capacitors are presented as one alternative, providing advantages like lower ESR, improved voltage derating, and better temperature and humidity stability. The document provides examples of replacing MLCC configurations with equivalent Ta polymer configurations for different automotive applications. It emphasizes that while sometimes a direct replacement is possible, most solutions require redesign work. Contact with a KEMET sales representative is recommended to support challenges.
48 tc 04-16-03pd paquete carrier
This document provides product data on Carrier rooftop air conditioning units. It includes details on:
- Features and benefits of the units such as ease of installation, maintenance, and use
- Model number nomenclature explaining the coding system
- Available factory-installed options and field-installed accessories such as economizers, motors, controls, coils, and curbs
- Performance data including cooling and heating capacity tables, sound levels, dimensions, and electrical information
The document provides specification sheets, engineering details, and selection information for Carrier 48TC packaged rooftop air conditioning units for heating, cooling, and ventilation applications.
Open type Maneurop condensing unit
This document provides specifications for Maneurop hermetic piston compressor condensing units including:
1. Units are available for medium temperature (-5°C to +5°C) and low temperature (-18°C to -25°C) applications.
2. Main components include the compressor, condenser, receiver, filter drier, valves and gauges.
3. Models range from 2 to 13 horsepower and specifications include capacity, power input, refrigerant type, sizes and electrical requirements.
Telco terminal block info
1) Telco produces a range of terminal blocks from low power barrier blocks rated from 10A to 80A to high power distribution blocks rated from 90A to over 1000A.
2) Barrier blocks are for low amperage applications from 10A to 80A while power distribution blocks are for higher amperage from 90A to over 1000A.
3) Telco is working to obtain UL certification for its low power products to expand into the US market and offers competitive pricing and product customization options.
POWERVAMP LTD. > COOLSPOOL 130 AND COOLSPOOL 260
The document provides specifications for four battery cart models from Coolspool: the CoolSpool 130, CoolSpool 260, CoolSpool 410, and CoolSpool 580. The specifications include each model's peak amps, amp hours, dimensions, weight, battery configuration, and charging capabilities. The CoolSpool 260 in particular is noted as being suitable for the first flight of the day, providing 1850 amps of starting peak power for 45 minutes after drawing 90 amps.
Nexans Heat Shrink Terminations Indoor 3 Core XLPE 6.6kV-11kV-33kV - Nexans SRDI
Nexans Heat Shrink Terminations Indoor 3 Core XLPE 6.6kV-11kV-33kV - Nexans SRDIThorne & Derrick International
This document provides specifications for SPDI heat-shrinkable terminations used for indoor termination of three core PILC/PICAS cables up to 12 kV. The terminations are suitable for voltages between 6.35/11 kV and 12 kV and cable cross sections ranging from 16-25 mm2 to 185-500 mm2. The terminations meet relevant CENELEC and IEC standards and provide water sealing and stress control through various heat-shrinkable components. Contact information is provided for ordering terminations for other cable sizes or types.Batteryinformer Narada general v1.2
Narada and BatteryInformer batteries and monitoring for telecom and Data Center UPS applications. Increase reliability, lower OPEX and reduce energy.
IFGS-1022TF Ethernet Switch
The document describes an industrial 8-port Ethernet switch with 2 gigabit ports that can operate in temperatures from -40 to 75 degrees Celsius. It has 8 10/100TX ports and 2 combo ports that can be used as either gigabit Ethernet ports or SFP fiber ports. The switch is designed for use in harsh industrial environments like factories and buildings.
RPS-SF6LBS-PKE
1) The document describes an SF6 gas insulated load break switch (LBS) for overhead power distribution systems.
2) The LBS can be manually or motorized operated, is rated for voltages up to 38kV and currents up to 1250A.
3) The document provides details on the technical specifications, inner structure, dimensions and installation of the LBS.
Single phase pole mounted circuit recloser catalog
Single phase pole mounted circuit recloser catalogRockwill T&D Group Manufacturer,Contractor, OEM, ODM
Rockwill Electric manufactures single phase vacuum reclosers for overhead distribution lines and substations ranging from 11kV to 38kV and 630A to 1250A. The RCW reclosers integrate control, protection, measurement, communication and fault detection functions. They can be customized with various relay protections, communication protocols, and reclosing settings. The reclosers use vacuum interrupters embedded in epoxy resin poles for high reliability over 20 years in harsh environments from -45°C to 85°C.Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
More Related Content
Similar to TOPBAND 500kW/1MWh ESS 40FT
Trading
This document provides a list of annual requirements for various BOS (balance of system) items with descriptions and estimated quantities needed. It includes over 125 different items such as batteries, charge controllers, cables, LED lights, printers, computers, weighing scales, and other electronic equipment. The total estimated annual quantities needed range from tens to tens of thousands of units for each item type. The goal is to estimate procurement needs for the coming year to support various infrastructure and technology systems.
power 6210.pdf
The Power 6210 DC power system supplies -48V DC to Ericsson radio systems and auxiliary equipment. It has a flexible design that allows it to be installed on walls or battery racks. The power unit can connect to multiple battery racks to achieve high battery capacities. It features an LCD display for system monitoring and can be accessed remotely. Detailed installation and configuration instructions are provided for mounting, cabling, grounding, connecting AC power and batteries, installing temperature sensors and configuring alarms.
Vb4 s lateral vacuum circuit breaker
This document provides information on the VB4/S medium-voltage indoor vacuum circuit breaker manufactured by Zhejiang Farady Electric Co., Ltd. The circuit breaker is applicable for three-phase AC power systems from 6kV to 24kV and is used to control and protect electrical equipment. It meets various industry standards. The document provides technical specifications, installation dimensions, and instructions for ordering the circuit breaker.
Polymer Capacitors for Automotive DC to DC Converters
Automotive Infotainment systems demand more from their components. Getting high performance parts found in smartphones with the quality expected of the automotive industry is a challenge.
KEMET's latest technology breakthrough with Low Voltage DC T591 Polymer Capacitors enables them to pass lifetime requirements targeted for Automotive applications.
Additionally there is a roadmap to getting to full AEC-Q200 qualifications with this same technology block.
This paper was presented by KEMET at the 2015 Applied Power Electronic Conference in Charlotte, NC.
Polymer Automotive High Voltage Extensions T598 Series
The document provides information about KEMET events and product offerings for polymer tantalum capacitors. It lists KEMET technical seminars scheduled for October 2018 in various locations in Europe. It also announces KEMET's capacitor simulation tool and online part number search. The document discusses KEMET's existing T591 and T598 polymer tantalum capacitor series that meet various AEC-Q200 qualification tests. It provides the development history and construction of KEMET's polymer tantalum capacitor technology. The document highlights KEMET's new high voltage extensions for the T598 series as the first to market for 12V rail applications. It summarizes evaluations of KEMET capacitors for load dump and ISO pulse testing. The document compares KE
Essential 12 v 100ah spec sheet 09-09-2020 v3
This document provides technical specifications for a 12V 100Ah lithium iron phosphate battery. The battery has a nominal voltage of 12.8V and capacity of 100Ah, for a total energy of 1.28kWh. It can withstand continuous discharge currents of up to 100A and has a cycle life of 2000 cycles at 100% depth of discharge. The battery chemistry is cylindrical lithium iron phosphate and it has dimensions of L330xW172xH219mm and weighs 15.5kg.
Rekoser Inverters Catalog
Rekoser manufactures pure sine wave inverters for solar applications: off-grid, on-grid and hybrid 1 phase and 3 phase.
http://rekoser.com/inverters/
Industrial products
Based on our decades of operations in Indian low voltage switchgear applications it is apparent that Indian industrial conditions are extremely harsh and demanding in nature. We understand the significance and need for a device which seamlessly, effortlessly and reliably delivers the best performance in varied applications.
Aswich Electrical DC Isolation Switch :EDS7 Series DC Isolator
Aswich Electrical :Choose our line of isolation switches that are up to 1500V and properly disengaged power when toggled. With a patented arc-extinguishing chamber, we guarantee better solar DC safety.
New VD4-Rockwill
This document provides technical specifications and parameters for ROCKWILL HV vacuum circuit breakers. It includes:
1) Product features such as epoxy resin material and contact springs from German manufacturers.
2) Dimensions and ratings for various circuit breaker models ranging from 630A to 4000A.
3) Performance specifications covering insulation levels, breaking capacities, speeds, lifetime, and test requirements.
Polymer mlcc replacement option external
The document discusses potential alternatives to MLCC capacitors for automotive applications given supply chain issues. It outlines key consideration factors for designers such as voltage, ripple current, temperature requirements, and footprint. Ta polymer capacitors are presented as one alternative, providing advantages like lower ESR, improved voltage derating, and better temperature and humidity stability. The document provides examples of replacing MLCC configurations with equivalent Ta polymer configurations for different automotive applications. It emphasizes that while sometimes a direct replacement is possible, most solutions require redesign work. Contact with a KEMET sales representative is recommended to support challenges.
48 tc 04-16-03pd paquete carrier
This document provides product data on Carrier rooftop air conditioning units. It includes details on:
- Features and benefits of the units such as ease of installation, maintenance, and use
- Model number nomenclature explaining the coding system
- Available factory-installed options and field-installed accessories such as economizers, motors, controls, coils, and curbs
- Performance data including cooling and heating capacity tables, sound levels, dimensions, and electrical information
The document provides specification sheets, engineering details, and selection information for Carrier 48TC packaged rooftop air conditioning units for heating, cooling, and ventilation applications.
Open type Maneurop condensing unit
This document provides specifications for Maneurop hermetic piston compressor condensing units including:
1. Units are available for medium temperature (-5°C to +5°C) and low temperature (-18°C to -25°C) applications.
2. Main components include the compressor, condenser, receiver, filter drier, valves and gauges.
3. Models range from 2 to 13 horsepower and specifications include capacity, power input, refrigerant type, sizes and electrical requirements.
Telco terminal block info
1) Telco produces a range of terminal blocks from low power barrier blocks rated from 10A to 80A to high power distribution blocks rated from 90A to over 1000A.
2) Barrier blocks are for low amperage applications from 10A to 80A while power distribution blocks are for higher amperage from 90A to over 1000A.
3) Telco is working to obtain UL certification for its low power products to expand into the US market and offers competitive pricing and product customization options.
POWERVAMP LTD. > COOLSPOOL 130 AND COOLSPOOL 260
The document provides specifications for four battery cart models from Coolspool: the CoolSpool 130, CoolSpool 260, CoolSpool 410, and CoolSpool 580. The specifications include each model's peak amps, amp hours, dimensions, weight, battery configuration, and charging capabilities. The CoolSpool 260 in particular is noted as being suitable for the first flight of the day, providing 1850 amps of starting peak power for 45 minutes after drawing 90 amps.
Nexans Heat Shrink Terminations Indoor 3 Core XLPE 6.6kV-11kV-33kV - Nexans SRDI
Nexans Heat Shrink Terminations Indoor 3 Core XLPE 6.6kV-11kV-33kV - Nexans SRDIThorne & Derrick International
This document provides specifications for SPDI heat-shrinkable terminations used for indoor termination of three core PILC/PICAS cables up to 12 kV. The terminations are suitable for voltages between 6.35/11 kV and 12 kV and cable cross sections ranging from 16-25 mm2 to 185-500 mm2. The terminations meet relevant CENELEC and IEC standards and provide water sealing and stress control through various heat-shrinkable components. Contact information is provided for ordering terminations for other cable sizes or types.Batteryinformer Narada general v1.2
Narada and BatteryInformer batteries and monitoring for telecom and Data Center UPS applications. Increase reliability, lower OPEX and reduce energy.
IFGS-1022TF Ethernet Switch
The document describes an industrial 8-port Ethernet switch with 2 gigabit ports that can operate in temperatures from -40 to 75 degrees Celsius. It has 8 10/100TX ports and 2 combo ports that can be used as either gigabit Ethernet ports or SFP fiber ports. The switch is designed for use in harsh industrial environments like factories and buildings.
RPS-SF6LBS-PKE
1) The document describes an SF6 gas insulated load break switch (LBS) for overhead power distribution systems.
2) The LBS can be manually or motorized operated, is rated for voltages up to 38kV and currents up to 1250A.
3) The document provides details on the technical specifications, inner structure, dimensions and installation of the LBS.
Single phase pole mounted circuit recloser catalog
Single phase pole mounted circuit recloser catalogRockwill T&D Group Manufacturer,Contractor, OEM, ODM
Rockwill Electric manufactures single phase vacuum reclosers for overhead distribution lines and substations ranging from 11kV to 38kV and 630A to 1250A. The RCW reclosers integrate control, protection, measurement, communication and fault detection functions. They can be customized with various relay protections, communication protocols, and reclosing settings. The reclosers use vacuum interrupters embedded in epoxy resin poles for high reliability over 20 years in harsh environments from -45°C to 85°C.Similar to TOPBAND 500kW/1MWh ESS 40FT (20)
Polymer Capacitors for Automotive DC to DC Converters
Polymer Capacitors for Automotive DC to DC Converters
Polymer Automotive High Voltage Extensions T598 Series
Polymer Automotive High Voltage Extensions T598 Series
Aswich Electrical DC Isolation Switch :EDS7 Series DC Isolator
Aswich Electrical DC Isolation Switch :EDS7 Series DC Isolator
Nexans Heat Shrink Terminations Indoor 3 Core XLPE 6.6kV-11kV-33kV - Nexans SRDI
Nexans Heat Shrink Terminations Indoor 3 Core XLPE 6.6kV-11kV-33kV - Nexans SRDI
Single phase pole mounted circuit recloser catalog
Single phase pole mounted circuit recloser catalog
Recently uploaded
Unit-III-ELECTROCHEMICAL STORAGE DEVICES.ppt
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
BRAIN TUMOR DETECTION for seminar ppt.pdf
BRAIN TUMOR DETECTION
AND CLASSIFICATION USING
ARTIFICIAL INTELLIGENCE
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Rainfall intensity duration frequency curve statistical analysis and modeling...
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Recently uploaded (20)
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Data Control Language.pptx Data Control Language.pptx
Data Control Language.pptx Data Control Language.pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Rainfall intensity duration frequency curve statistical analysis and modeling...
Rainfall intensity duration frequency curve statistical analysis and modeling...
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
TOPBAND 500kW/1MWh ESS 40FT
- 7. LiFePO4 PACK lamphenol plugs bms tray can-bus anodized housing 25.6V 225Ah_5.76kWh 75kg TBD Model Voltage Capacity Weight Dimension TB25225-T106 A B 07
- 9. LiFePO4 CONTAINERHVAC Air In Door Air In Monitoring System Battery Rack #1 Battery Rack #2 MBMS - 1 MBMS - 2 Battery Rack #3 Battery Rack #4 Fire Fighting Systems FFS Battery Rack #5 Battery Rack #6 Battery Rack #7 Battery Rack #8 Distribution Panel Door Door PCS=PowerCovertionSystems 1800Ah_1.1MWh 614.4V 1S8P_8RACKs Voltage Capacity Connection 40ft ISO Container Weathering Steel *top view layout 09
- 12. INDUSTRIAL AIR CONDITION Air Flow Thermal Simulation HVAC Module Air Duct 12
- 13. FFS&ALARM SYSTEMS Fire Alarm Surveillance FFS 13
- 14. INTEGRATED BATTERY SOLUTION Industry Air Condition Lithium Module Control Switch PCS Master BMS AC Distribution 14
- 16. ELECTRICAL STRUCTURE 500 kW/ 1MWH CESS 16
- 17. COMMUNICATION DIAGRAM CAN BUS MODBUS/CAN-BUS CURRENT DETECT MAINCONTACTOR FUSE MBMS-1 BAMS PCS BMU1.1 BMU1.2 BMU1.3 Module1.1 Module1.2 Module1.3 BMU1.16 Module1.16 MAINCONTACTOR CURRENT DETECT FUSE MBMS-4 BMU4.1 BMU4.2 BMU4.3 Module4.1 Module4.2 Module4.3 BMU4.16 Module4.16 BMU= Battery Managment Unit MBMS= Main Battery Managment System BAMS= Battery Array Managment System 17
- 18. CONTAINER LAYOUT HVAC Air In AirOut Door Air In Monitoring System Battery Rack #1 Battery Rack #2 MBMS - 1 MBMS - 2 Battery Rack #3 Battery Rack #4 Fire Fighting Systems FFS Battery Rack #5 Battery Rack #6 Battery Rack #7 Battery Rack #8 Distribution Panel Door Door PCS=PowerCovertionSystems 500KW/1MWH 40FT ISO CONTAINER 18
- 19. 19