Tire Release Agent and Marking Paint Catalog

Tire Release Agent and Marking Paint

轮胎脱模剂和油墨漆
Product Catalog
产品目录

KCT Co., Ltd.
(주)한국켐툴
PT. Global Lubriutama
Global Fine Chemicals (Shanghai) Co., Ltd.
高格博精细化工（上海）有限公司

asiakote.com

Contents 目录
Corporate Profile 企业概况

3

Product Introduction 产品介绍

4

Product Portfolio 产品组合

5

AS-100: Anti-Tack Solution - Batch-Off 防黏剂

6

AS-100N: Anti-Tack Solution - Batch-Off 防黏剂

7

HL-A Series Aqueous: Tire Marking Paint 水剂型轮胎用油墨漆

8

HL-S Series: Solvent Tire Marking Paint 溶剂型轮胎用油墨漆

9

Rollers: Marking Paint Rollers 划线轮子

10

RE-200M: Pre-Forming Bladder Coating 胶囊涂层(预成型)

11

RE-2006: Pre-Forming Bladder Coating 胶囊涂层(预成型)

12

BR-2000: Curing Bladder Coating 硫化胶囊涂层

13

MRE-30: Mold Release 脱模剂

14

RE-500: Semi-Permanent Mold Release 半永久性脱模剂

15

RE-505: Semi-Permanent Mold Release 半永久性脱模剂

16

HYTOX-300: High Temperature Grease 高温润滑脂

17

RE-1000GTI: Green Tire Inside Paint 胎坯内隔离剂

18

RE-389GIP: Green Tire Inside Paint 胎坯内隔离剂

19

RE-100GOP: Green Tire Outside Paint 胎坯外隔离剂

20

RE-100GOP-W: Green Tire Outside Paint 胎坯外隔离剂

21

RE-3415: Trimming Lubricant 修边润滑剂

22

RE-3415-A: Trimming Lubricant 修边润滑剂

23

RE-20008M: Tire Bead Release Agent 轮胎胎圈润滑剂

24

TD-100-B: Outside Tire Finishing Paint 轮胎外表面修整漆

25

TD-100-S: Outside Tire Finishing Paint 轮胎外表面修整漆

26

TD-100-W: Outside Tire Finishing Paint 轮胎外表面修整漆

27

BP-800: Sidewall Protective Paint 胎侧保护胎漆

28

AD-901: Tire Label Adhesive 标签粘合剂

29

Customers 我们的客户

30

The information and statements contained herein are based on our testing and experience.
The final determination of the suitability of the products for the application contemplated
by the user is the sole responsibility of the buyer. The products shown in this literature may
not be available for sale and/or available in all geographies. The claims may not have been
approved for all use in all countries or regions. All implied warranties of merchantability or
fitness for any particular purpose are expressly excluded. KCT, Global Lubriutama, and Global
Fine Chemicals expressly disclaim liability for consequential or incidental damages, whether
based on warranty or negligence.
本文件包含的信息和声明基于我们的测试与经验。产品是否最终适用于用户预期的用途应
由买方负责。本文件中所述产品不一定在所有地区有售和供货。在不同的国家和地区，与
产品使用有关的索赔要求可能需要批准。与适销性或针对某一特定目的的适合性有关的所
有暗示保证明确予以排除。KCT 、Global Lubriutama和高格博精细化工明确表示，对于结
果性或附带性损害赔偿（无论是基于保证，还是基于过失）不承担任何责任。

asiakote.com
2

Corporate Profile 企业概况
KCT Co., Ltd. (Korea), PT. Global Lubriutama (Indonesia) and Global
Fine Chemical (Shanghai) Co., Ltd. (China) develop and manufacture
quality performance release agent, marking paint, anti-finger print
varnish, lubricants, and grease for tire, steel, rubber hose, polyurethane,
and die casting manufacturing.
Our group started in 1991 with the sale and distribution of
industrial lubricants and premium grease. In 1992, we expanded our
focus to include tire release agents for the automotive industry with the
introduction of non-silicone and aqueous-based release agent for the tire
uniformity process (RE-20008M). The development of this first product
was the benchmark for the development of other products that satisfy
the changing needs of the tire manufacturing industry. Our dedication to
listen to our customers based on detailed consultation, product quality
and proximity of production location close to our main markets make us a
reliable partner. We provide a full portfolio of tire release agent products
and strive to enhance the production efficiency of our customers.
Our product portfolio provides solution to the challenges
encountered in manufacturing of industrial products. All our products
are customized to meet the varying equipment design, production cycle,
processing temperature and speed, and product style and material
compositions of our customers.
As we expand our business, we are looking for new distributors and
resellers to penetrate new accounts and service our existing customers in
various parts of the world. If you are interested in becoming part of our
distributor network, please contact us with your details. We look forward
to a mutually beneficial partnership.
KCT Co., Ltd.（韩国）、PT. Global Lubriutama（印度尼西亚）
和高格博精细化工（上海）有限公司（中国）开发和制造用于轮
胎、钢材、橡胶软管、聚氨酯和压铸件制造的高性能脱模剂、油墨
漆、抗指纹涂层、润滑剂和润滑脂。
集团自 1991 年开始从事工业润滑剂和高级润滑脂的销售和经
销。 1992 年，我们的业务范围扩展至汽车工业用轮胎脱模剂，引入
用于轮胎均匀性工艺中的无有机硅和水剂型脱模剂( RE-20008M )。
该产品的开发成为开发其他产品的基准，满足了轮胎制造业不断变
化的需求。我们仔细聆听客户需求，为客户提供详细的咨询服务和
高品质的产品；我们的生产地点毗邻主要市场，这些优势使我们成
为客户可靠的合作伙伴。我们提供全系列轮胎脱模剂产品，致力于
提高客户的生产效率。
我们的产品组合能够为工业产品制造中遇到的挑战提供解决方
案。所有产品均根据客户不同的设备设计、生产周期、加工温度和
速度，以及产品款式和材料成分而定制，满足客户需求。
在扩展业务期间，我们要寻找新的分销商和经销商，以便在世
界各地开展业务，为客户提供服务。如果您有意成为我们的经销网
络中的一员，请与我们联系并且提供您的详细资料。我们期待着双
赢互利的合作关系。

asiakote.com
3

Product Introduction 产品介绍
Tire release agents are indispensable components
formulated to ensure that efficiency is maintained at every stages
of the production process. In tire manufacturing, tackiness is
an adhesive characteristic inherent in most rubber compounds.
The uncured green tire in its natural form is viscous and soft. A
solid, elastometric material is achievable through cross-linking
the rubber compound via the vulcanization process. It is based
on this adhesive property that makes tire release agent a critical
component in several steps of the tire manufacturing process.
Without tire release agents, manufacturing of tires would be
virtually impossible. Our products have the following features
and benefits:

Features

特点

Tire Release Agent 轮胎脱模剂

轮胎脱模剂是轮胎生产中不可或缺的组成部分，旨在
确保生产过程中各个环节的高效性。在轮胎生产中，胶粘性
是大多数中胶料固有的粘附特性。天然生胶质地柔软，具有
粘性。通过硬化/硫化工艺使胶料发生交联，从而获得固态
弹性橡胶。正是由于生胶这种粘附特性，使得脱模剂成为轮
胎生产过程中多个环节的关键性因素。不使用轮胎脱模剂，
轮胎生产便不可能实现。我们公司产品具有以下特点与优
点:

Benefits

优点

Aqueous dispersion emulsion containing no
flammable or volatile organic compounds (VOC)
水剂型乳液，不含可燃性或挥发性有机化合物
（VOC）
Reduced consumption (50% less) per tire compared
to conventional solvent-based products
与传统的溶剂型产品相比，轮胎的平均用量减少
（低于50%）

A safer working environment with reduced health and
fire hazards
工作环境安全，降低了对健康的危害与火灾危险

Excellent release properties , good air-venting, and
enhanced rubber flow
脱模性能出色，透气性能良好，可改善橡胶流动性

High quality product with improved surface finish

Excellent heat resistance and no chemical reaction
with various rubber types
耐热性能出色，不与橡胶发生化学反应
High compatibility with current spray equipment and
fast drying time
适用于目前的喷涂设备，符合快干时间要求

High quality tires and minimum reject rate

asiakote.com
4

Reduced operating cost
运营成本下降

产品质量优异，产品表面光洁度更好

高质量轮胎，废品率降至最低
Ease of use and higher production efficiency
使用方便，生产效率高

Product Portfolio 产品组合
Process Step

Application

Product Name

Description

Page

加工步骤

应用

产品名称

产品描述

页

공정

용도

제품명

제품설명

페이지

Compounding

Rubber Slab (Batch-Off)

6-7

橡胶片

콤파운드

배치오프 고무표면

AS-100
AS-100N

Anti-Tack Solution - Batch-Off

密炼
Extrusion

Green Tread Rubber

轮胎胎面

HL-A Series

Aqueous Tire Marking Paint

挤出
압출

미가류 트래드고무
Green Tread Rubber

HL-S Series

수성 마킹 잉크
Solvent Tire Marking Paint

Rollers

유성 마킹 잉크
Marking Paint Rollers

轮胎胎面
Green Tread Rubber

轮胎胎面
Pre-Forming

Pre-Forming Bladder

预成型

预成型胶囊

성형

성형 브라더 표면

Vulcanization

Curing Bladder

硫化

硫化胶囊

가류

가류브라더
Curing Mold

硫化模具
가류 몰드
Curing Mold

硫化模具
가류 몰드
Green Tire - Inside

胎坯 - 内表面
미가류 타이어 내부
Green Tire - Outside

胎坯 - 外表面
미가류 타이어 외부
Finishing

Trimming Machine

成品

修边机

완제품

트리밍 머신
Finished Tire Bead (U/F)

成品轮胎胎圈（均匀性试验）
완제품 비드부
Finished Tire Sidewall

成品轮胎胎侧
완제품 타이어 옆면

成品轮胎胎侧
완제품 타이어 옆면
Finished Tire Tread

成品轮胎的胎面
완제품타이어 트래드

防黏剂
배치오프 방착제
8

水剂型轮胎用油墨漆
9

溶剂型轮胎用油墨漆
10

划线轮子
마킹 잉크 롤러

RE-200M
RE-2006

Pre-Forming Bladder Coating

BR-2000

Curing Bladder Coating

MRE-30
RE-500
RE-505
HYTOX-300
RE-1000GTI
RE-389GIP
RE-100GOP
RE-100GOP-W

성형 브라더 이형제

가류 브라더
Mold Release

14 - 16

脱模剂
몰드이형제
High Temperature Grease

17

高温润滑脂
고온용 그리스
Green Tire Inside Paint

18- 19

胎坯内隔离剂
미가류 내부 이형제
Green Tire Outside Paint

20 - 21

胎坯外隔离剂
미가류 외부 이형제
Trimming Lubricant

RE-20008M

Tire Bead Release Agent

AD-901

13

硫化胶囊涂层

RE-3415
RE-3415-A

TD-100-B
TD-100-S
TD-100-W
BP-800

11 - 12

胶囊涂层（预成型）

22 - 23

修边润滑剂
트리밍 윤활유
24

轮胎胎圈润滑剂
U/F 이형제
Outside Tire Finishing Paint

25 - 27

轮胎外表面修整漆
수리용 페인트
Sidewall Protective Paint

28

胎侧保护漆
백테 보호페인트
Label Adhesive

29

标签粘合剂
라벨 접착제
asiakote.com
5

AS-100 Anti-Tack Solution - Batch-Off 防黏剂
Process Step:
Application:

Compounding

加工步骤:
应用:

密炼
橡胶片

Description

说明

AS-100 is designed to serve as an auxiliary anti-sticking
treatment for the surface of green rubber layers. It is an
extremely stable, water-thinned emulsion that is widely used
in the dipped rubber releases. AS-100 is an aqueous dispersion
of fatty acid and hydrocarbon derivatives and does not contain
silicone derivatives.

AS-100设计用于生胶橡胶轮胎表面的辅助防粘处理。其性
能非常稳定，是可溶于水的乳剂，广泛用于浸渍型橡胶脱
膜。AS-100是一种水剂型脂肪酸和烃类衍生物，不含有机
硅衍生物。

Features

特点

Provide high temporary anti-tack insulation between rubber
slabs
Good wetting and dispersion characteristics
Economical to use due to lean dilution ratios
Excellent stable emulsion with water
Minimal dusting
No chemical reaction with all rubber types
Non-flammable

为橡胶片间提供出色的临时抗粘隔离
润湿和扩散特性良好
稀释率高，经济实用
稳定性出色的水溶乳剂
粉尘量降至最低
不与橡胶发生化学反应
不可燃

Properties

特性

Form / Color: Light brown to white liquid
pH Value:
8.0 - 10.0
Solid Content: 20% - 50%
Specific Gravity: 0.9 - 1.2

外观/颜色：
pH值：
固体含量：
比重：

Application

应用

Before its application, AS-100 should be diluted with water
from 1:3 up to 1:8. The dilution ratio in the batch-off bath
depends on the rubber type being mixed (synthetic rubbers
are generally less tacky than natural rubber). The optimal
dilution ratio can only be determined through practical
experiments in the laboratory and the manufacturing facility.
AS-100 can be applied to all types of rubber sheets.

使用前，将AS-100按1:3至1:8的比例用水稀释。冷却池的
稀释率取决于混合的橡胶种类，合成橡胶的粘性通常比天
然橡胶差。因此最佳稀释率只能在实验室和制造厂的实际
实验中进行确定。
AS-100适用于所有类型的橡胶片。

Storage

储存

Up to six (6) months when stored in fresh, indoor and covered
places and kept dry in the original sealed containers. The
storage temperature range is +5oC to +25oC. Avoid product
freezing.

最长储存时间为六（6）个月，产品应储存在原密封容器
中，置于室内或遮蔽处，环境须保持干燥和空气流通。储
存温度：+5oC至+25oC。产品不可冷冻。

asiakote.com
6

褐色至米白色胶体
8.0 - 10.0
20% - 50%
0.9 - 1.2

AS-100N Anti-Tack Solution - Batch-Off 防黏剂
Process Step:
Application:

Compounding

加工步骤:
应用:

密炼
橡胶片

Description

说明

AS-100N is designed to serve as an auxiliary anti-sticking
treatment for the surface of green rubber layers. It is an
extremely stable, water-thinned emulsion that is widely
used in the dipped rubber releases. AS-100N is an aqueous
dispersion of fatty acid and hydrocarbon derivatives and does
not contain silicone derivatives. In addition, there is no filler in
this product, and hence no dusting.

AS-100N设计用于生胶橡胶轮胎表面的辅助防粘处理。其
性能非常稳定，是可溶于水的乳剂，广泛用于浸渍型橡胶
脱膜。AS-100N是一种水剂型脂肪酸和烃类衍生物，不含
有机硅衍生物。此外，本产品中没有填料，因此不会产生
粉尘。

Features

特点

Provide high temporary anti-tack insulation between rubber
slabs
Good wetting and dispersion characteristics
Economical to use due to lean dilution ratios
Excellent stable emulsion with water
No dusting
Non-flammable

为橡胶片间提供出色的临时抗粘隔离
润湿和扩散特性良好
稀释率高，经济实用
稳定性出色的水溶乳剂
无粉尘
不可燃

Properties

特性

Form / Color: White, milky liquid
pH Value:
8.0 - 10.0

外观/颜色：
pH值：
固体含量：
比重：

Application

应用

Before its application, AS-100N should be diluted with water
from 1:3 up to 1:8. The dilution ratio in the batch-off bath
depends on the rubber type being mixed (synthetic rubbers
are generally less tacky than natural rubber). The optimal
dilution ratio can only be determined through practical
experiments in the laboratory and the manufacturing facility.
AS-100N can be applied to all types of rubber sheets.

使用前，将AS-100N按1:3至1:8的比例用水稀释。冷却池的
稀释率取决于混合的橡胶种类，合成橡胶的粘性通常比天
然橡胶差。因此最佳稀释率只能在实验室和制造厂的实际
实验中进行确定。
AS-100N适用于所有类型的橡胶片。

Storage

储存

freezing.


白色乳状液体
8.0 - 10.0
20% - 50%
0.9 - 1.2

asiakote.com
7

HL-A Series Aqueous Tire Marking Paint 水剂型轮胎用油墨漆
Process Step:
Application:

Extrusion
Green Tread Rubber

加工步骤:
应用:

挤出
轮胎胎面

Description

说明

HL-A Series is an aqueous-based marking paint used for
identification on green tread rubber surfaces after the
extrusion and before the curing process. The HL-A Series
is offered in a wide range of firm and excellent contrasting
colors. While it has a high temperature resistance, the HL-A
Series is not designed to be subjected to vulcanization
between rubber layers.

HL-A系列是水剂型标记油墨漆，在挤出后和硫化过程前，
用于对胎坯表面进行标识。HL-A系列广泛用于各种公司，
颜色对比强烈。虽然HL-A系列具有耐高温性，但并不要求
橡胶层之间先进行硫化。

Features

特点

Compatible and no chemical reaction with all rubber types
Excellent anti-blemish property
Easy to use
Fast drying time
Does not contaminate mold
Non-flammable

适用于所有橡胶类型，不与橡胶发生化学反应
抗污渍特性
使用方便
干燥时间短
不会污染模具
不可燃

Properties

特性

Form / Color:

pH Value:
Solid Content:
Specific Gravity:
Viscosity:

Blue, Green, Light Blue, Orange, Pink,
Red, White, and Yellow liquid
7.0 - 9.0
25% - 50%
0.9 - 1.3
80 - 300 sec (Ford Cup #4)

外观/颜色：

pH值：
固体含量：
比重：
粘度：

蓝色、绿色、天蓝色、橙色、
粉红色、红色、白色和黄色液体
7.0 - 9.0
25% - 50%
0.9 - 1.3
80 - 300秒（4号福特杯）

Application

应用

HL-A Series is a “ready to use” product and does not require
additional dilution. User must determine the most appropriate
way of application in each case.
Before its application, HL-A Series should be homogenized and
agitated (10 or 20 rpm) in its original container. Depending on
the viscosity of the final product ordered, occasional mixing is
required during the normal period of usage.

HL-A系列属于即开即用型产品，无需进行稀释。用户必须
根据不同情况来确定最适用的涂抹方式。
涂抹之前，应先将HL-A系列在原容器中均匀搅拌（10或
20rpm）。根据所订购最终产品的粘度，正常使用期间可
能需要不时进行混合。

Storage

储存

Up to four (4) months when stored in fresh, indoor and
covered places and kept dry in the original sealed containers.
The storage temperature range is +5oC to +25oC. Avoid product
freezing.

最长储存时间为四（4）个月，产品应储存在原密封容器

asiakote.com
8

HL-S Series Solvent Tire Marking Paint 溶剂型轮胎用油墨漆
Process Step:
Application:

Extrusion
Green Tread Rubber

加工步骤:
应用:

挤出
轮胎胎面

Description

说明

HL-S Series is a solvent-based marking paint used for
identification on green tread rubber surfaces after the
extrusion and before the curing process. The HL-S Series
is offered in a wide range of firm and excellent contrasting
colors. While it has a high temperature resistance, the HL-S
Series is not designed to be subjected to vulcanization
between rubber layers.

HL-S系列是溶剂型标记油墨漆，在挤出和硫化过程前，用
于对胎坯表面进行标识。HL-S系列广泛用于各种公司，颜
色对比强烈。虽然HL-S系列具有耐高温性，但并不要求在
橡胶层之间先进行硫化。

Features

特点

Compatible and no chemical reaction with all rubber types
Excellent anti-blemish property
Easy to use
Fast drying time
Does not contaminate mold

适用于所有橡胶类型，不与橡胶发生化学反应
抗污渍特性
使用方便
干燥时间短
不会污染模具

Properties

特性

Form / Color:

Solid Content:
Specific Gravity:
Viscosity:

Blue, Green, Light Blue, Orange, Pink,
Red, White, and Yellow liquid
25% - 50%
0.9 - 1.3
4,000 - 15,000 cps (Brookfield #4, 30 rpm)

外观/颜色：

固体含量：
比重：
粘度：

蓝色、绿色、天蓝色、橙色、
粉红色、红色、白色和黄色液体
25% - 50%
0.9 - 1.3
4,000 - 15,000厘泊（博力飞#4, 30 rpm)

Application

应用

HL-S Series is a “ready to use” product and does not require
additional dilution. User must determine the most appropriate
way of application in each case.
Before its application, HL-S Series should be homogenized and
agitated (10 or 20 rpm) in its original container. Depending on
the viscosity of the final product ordered, occasional mixing is
required during the normal period of usage.

HL-S系列属于即开即用型产品，无需进行稀释。用户必须
根据不同情况来确定最适用的涂抹方式。
涂抹之前，应先将HL-S系列在原容器中均匀搅拌（10或
20rpm）。根据所订购最终产品的粘度，正常使用期间可
能需要不时进行混合。

Storage

储存

storage temperature range is -20oC to +40oC.

存温度：-20oC至+40oC。

asiakote.com
9

Rollers Marking Paint Rollers 划线轮子
Process Step:
Application:

Extrusion
Green Tread Rubber

加工步骤:
应用:

挤出
轮胎胎面

Description

说明

Marking Paint Rollers complements the HL-A Series and HL-S
Series marking paints that are applied on green tread rubber
after the extrusion process.

划线轮子是和HL-A系列和HL-S系列油墨漆配套使用的工
具。

Features

特点

Improve aesthetic of marking line with consistent thickness
and width
Provide economical use of paint
High wear-resistance

划线效果均匀美观
节约使用油漆
耐磨

Properties

特性

Inner Diameter (ID):
19.0, 28.5 mm
Wheelhead Width (WH): 0.7 - 10.0 mm (designed to

customer specification)

内径 (ID)： 19.0、28.5毫米
轮宽 (WH)： 0.7 - 10.0毫米（可以根据客户要求定

制）

Application

应用

Rollers need to be washed with water (when using HL-A
Series) or solvent (when using HL-S Series) when not in use.
Rollers need to be replaced periodically: after extended use,
the gaps adjacent to wheelhead will become larger which may
lead to excessive paint output and contaminate the tread.
Replacement period is based on specific site usage.

在不使用轮子滚筒需要与水（用HL-A系列的时候）或溶剂
洗涤(用HL-S系列的时候)。轮子应定期更换，长时间使用
因磨损间隙变大，油墨流出多，出现滴漏现象，影响干燥
并污染胎面。具体更换时间应根据现场使用情况而定。

asiakote.com
10

RE-200M Pre-Forming Bladder Coating 胶囊涂层（预成型）
Process Step:
Application:

Pre-Forming
Pre-Forming Bladder

加工步骤:
应用:

预成型
预成型胶囊

Description

说明

RE-200M is a coating applied on the bladder in the tire
building or pre-forming process. Besides providing temporary
anti-tack and venting properties, RE-200M is also formulated
to ensure ease of release of the green tire from the bladder
after the pre-forming process has been completed. RE-200M
has a rapid drying time to ensure that production efficiency is
maintained.

RE-200M是在轮胎制造过程或预成型过程中涂抹在胶囊上
的涂层。RE-200M除了能提供临时抗粘性和透气性之外，
还能进行调配，确保胎坯在预成型加工完成后，能与胶囊
轻松分离。RE-200M具有快干特性，可确保生产效率。

Features

特点

No side effect during vulcanization
Excellent rubber to rubber adhesion
Superior air venting
Good lubricity
Non-flammable

硫化过程中无任何副作用
出色的橡胶对橡胶粘合性
透气性优异
润滑性良好
不可燃

Properties

特性

Form / Color:
pH Value:
Solid Content:
Specific Gravity:
Viscosity:

White, milky liquid
8.0 - 10.0
2% - 20%
0.9 - 1.0
8 - 30 sec (Ford Cup #4)

外观/颜色：
pH值：
固体含量：
比重：
粘度：

白色乳状液体
8.0 - 10.0
2% - 20%
0.9 - 1.0
8 - 30秒（4号福特杯）

Application

应用

RE-200M is a “ready-to-use” product and does not require
further dilution. RE-200M is applied to the bladder using a
light spray or brush. It is not necessary to wait for the product
to dry up before processing.

RE-200M属于即开即用型产品，无需进行稀释。使用轻型
喷雾器或刷子将RE-200M涂抹在胶囊上。无需等待产品干
透，便可继续加工。

Storage

储存

freezing.


asiakote.com
11

RE-2006 Pre-Forming Bladder Coating 胶囊涂层（预成型）
Process Step:
Application:

Pre-Forming
Pre-Forming Bladder

加工步骤:
应用:

预成型
预成型胶囊

Description

说明

RE-2006 is a coating applied on the bladder in the tire building
or pre-forming process. Besides providing temporary anti-tack
and venting properties, RE-2006 is also formulated to ensure
ease of release of the green tire from the bladder after the
pre-forming process has been completed. RE-2006 has a rapid
drying time to ensure that production efficiency is maintained.
This product does not contain any solvent or silicone and
hence does not pose any health hazard.

RE-2006是在轮胎成型过程或预成型过程中涂抹在胶囊上的
涂层。RE-2006除了能提供临时抗粘性和透气性之外，还
能进行调配，确保胎坯在预成型加工完成后，能与胶囊轻
松分离。RE-2006具有快干特性，可确保生产效率。此产
品不含任何溶剂，也不含有机硅，因此不会导致任何健康
危害。

Features

特点

No side effect during vulcanization
Superior air venting
Good lubricity
Non-flammable

硫化过程中无任何副作用
透气性优异
润滑性良好
不可燃

Properties

特性

Form / Color:
pH Value:
Solid Content:
Specific Gravity:
Viscosity:

White, milky liquid
7.5 - 10.0
2% - 20%
0.9 - 1.0

外观/颜色：
pH值：
固体含量：
比重：
粘度：

白色乳状液体
7.5 - 10.0
2% - 20%
0.9 - 1.0
8 - 30秒（4号福特杯）

Application

应用

RE-2006 can be diluted from 1:1 to 1:3, depending on several
factors including bladder type and rubber compound. RE-2006
is applied on the bladder by spray or brush. It is not necessary
to wait for the product to dry-up before processing.
RE-2006 can be applied to most types of rubber, excluding
silicone- and fluoride-based rubbers.

RE-2006可根据胶囊类型和胶料等多种因素，按1:1至1:3的
比例进行稀释。RE-2006可使用喷雾器或刷子涂抹在胶囊
上。无需等待产品干透，便可继续加工。
RE-2006可适用于大多数类型的橡胶，但有机硅和氟基橡胶
除外。

Storage

储存

freezing.


asiakote.com
12

BR-2000 Curing Bladder Coating 硫化胶囊涂层
Process Step:
Application:

Vulcanization
Curing Bladder

加工步骤:
应用:

硫化
硫化胶囊

Description

说明

BR-2000 is durable, silicone-based bladder release coating
designed for butyl rubber bladders typically used in tire curing
presses. It is a white aqueous emulsion that cures to a clear,
glossy coating which offers superior lubricity. BR-2000 does
not contain any aromatic or chlorinated solvents. BR-2000 has
been proven to increase productivity, improve tire aesthetics,
and prolong bladder life due to its high resistance to heat.

BR-2000是一种耐用型有机硅胶囊脱模涂层，专为轮胎硫
化机中常用的丁基橡胶胶囊而设计。BR-2000为白色水乳
液，可硫化为光滑、透明的涂层，润湿性出色。BR-2000
不含任何芳香溶剂或氯化溶剂。实践证明，BR-2000以其
出色的耐热性，可提高生产率，改善产品外观，延长胶囊
使用寿命。

Features

特点

Easy to apply
Effective through multiple curing cycles
Excellent lubricity
High temperature resistance and no thermal degradation

涂抹方便
可有效用于多个硫化期
润滑性出色
耐高温，无热降解

Properties

特性

pH Value:
3.0 - 5.0
Viscosity:

外观/颜色：
pH值：
固体含量：
比重：
基液粘度：

Application

应用

BR-2000 is a “ready to use” product and does not require
further dilution. BR-2000 is applied to the bladder using a light
spray or brush (swab). Please ensure that the exposed surface
is fully covered.
New bladders should be clean and uncontaminated,
otherwise, improper bonding of the coating will occur and
its effectiveness will be reduced. It is strongly recommended
that the pre-coated bladder is heated in an oven at 150oC at
30 minutes to bake on this primer coat as this has been found
to improve its durability. Alternatively, the bladder may be
put in the press to allow curing to occur by the heat of the
press. The coating will cure and bond to the bladder surface
when it comes in contact with the press heat. The coating
can be replenished by spraying or brushing the inside of the
green tire and allowing transfer on to the surface of the curing
bladder. Periodic re-treatment is required for continuous
performance and frequency depends on several factors.

BR-2000属于即开即用型产品，无需进行稀释。使用轻型
喷雾器或刷子（拭子）将BR-2000涂抹在胶囊上。请确保
产品完全覆盖所有裸露在外的表面。
新胶囊应进行清洁，彻底去除污物，否则会使涂层无法完
全粘合，导致产品效用下降。强烈建议将预涂胶囊在150oC
的烘箱中加热30分钟，使底漆受热，从而提高耐用性。或
将胶囊放入硫化机中，通过硫化机加热进行硫化。涂层在
硫化机中受热后，将发生硫化并粘附在胶囊表面。涂层可
以通过在胎坯内表面喷涂或刷涂来进行修补，进而渗透到
硫化胶囊表面。为了能获得持续性能，须定期重新喷涂，
喷涂频率受多种因素影响。

Storage

储存

freezing.


白色乳状液体
3.0 - 5.0
20% - 30%
0.9 - 1.1
1,200 - 1,900厘泊（博力飞 #2, 3rpm）

asiakote.com
13

MRE-30 Mold Release 脱模剂
Process Step:
Application:

Vulcanization
Curing Mold

加工步骤:
应用:

硫化
硫化模具

Description

说明

MRE-30 is a release agent for the mold of the curing machine.
It is an aqueous emulsion of specially modified silicone resin
polymer with ethoxylated alcohols in water carrier. MRE-30
has excellent release properties with no transfer of the film to
the rubber.

MRE-30是一种专用于硫化机模具的脱模剂。它为水乳
液，是专门改良过的有机硅树脂聚合物，含水溶性乙氧基
醇。MRE-30脱模性能出色，不会将薄膜转移到橡胶上。

Features

特点

Good lubricity and good rubber flow
Mold contamination substantially minimized
Good outside appearance
No effects on adhesion, varnishing or printing process
Non-staining
Non-flammable

润滑性和橡胶流动性良好
最大程度地降低了模具污染情况
表面光洁
对粘合、上漆或压印过程没有影响
无污染物
不可燃

Properties

特性

pH Value:
8.0 - 10.0
Viscosity:

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

MRE-30 is a “ready to use” product and does not require
additional dilution. MRE-30 can be applied by spraying on the
mold side of the vulcanizing machine.
Prior to application, the mold surface has to be cleaned.
Before its application, MRE-30 should be homogenized and
agitated (slow speed) in its original container.

MRE-30属于即开即用型产品，无需进行稀释。使用
时，MRE-30可喷涂在硫化机模具一侧。
涂抹前，须清洁模具表面。同时，应先将MRE-30在原有容
器中进行均匀搅拌（慢速）。

Storage

储存

freezing.


asiakote.com
14

白色乳状液体
8.0 - 10.0
3% - 10%
0.9 - 1.0
8 - 50秒（4号福特杯）

RE-500 Semi-Permanent Mold Release 半永久性脱模剂
Process Step:
Application:

Vulcanization
Curing Mold

加工步骤:
应用:

硫化
硫化模具

Description

说明

RE-500 is a semi-permanent mold release agent. It is a
silicone-based coating that has been proven to increase
productivity and improve tire aesthetics. It is a white aqueous
emulsion that cures to a clear, glossy coating which offers
superior lubricity. RE-500 does not contain aromatic or
chlorinated solvents.

RE-500是一种半永久性脱模剂。它是一种有机硅涂层，实
践证明，它能提高生产率，改善产品外观。RE-500为白色
水乳液，可硫化为光滑、透明的涂层，润滑性出色。RE500不含芳香溶剂或氯化溶剂。

Features

特点

Easy to apply
Excellent lubricity

涂抹方便
润滑性出色

Properties

特性

pH Value:
4.0 - 6.0
Viscosity:

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

RE-500 is a “ready to use” product and does not require
further dilution. RE-500 is applied to the mold or uncured tire
using a light spray or brush (swab).
New molds should be clean and uncontaminated, otherwise,
improper bonding of the coating will occur and its
effectiveness will be reduced. Please ensure that the exposed
surface is fully covered after coating has dried. The coating
will cure by the heat of the first tire molding. Over-coating of
RE-500 should be avoided or else excessive release agent will
result in contamination and drawback. The number of cycles
between applications depends on application efficiency, curing
time, curing temperature, tire construction, and composition.

RE-500属于即开即用型产品，无需进行稀释。使用轻型喷
雾器或刷子（拭子），可将RE-500涂抹在模具或未硫化橡
胶上。
新模具应进行清洁，彻底去除污物，否则会使涂层无法完
全粘合，从而导致产品效用下降。请确保涂层干燥后能完
全覆盖所有裸露在外的表面。涂层在第一次轮胎膜塑时受
热硫化。RE-500应避免喷涂过量，否则过量脱模剂将造成
污染和瑕疵。根据不同涂抹效率、硫化时间、硫化温度、
轮胎结构和成分，可确定经过几个硫化期后需再次涂抹。

Storage

储存

freezing.


白色乳状液体
4.0 - 6.0
13% - 17%
0.8 - 1.2
8 - 50秒（4号福特杯）

asiakote.com
15

RE-505 Semi-Permanent Mold Release 半永久性脱模剂
Process Step:
Application:

Vulcanization
Curing Mold

加工步骤:
应用:

硫化
硫化模具

Description

说明

RE-505 is a semi-permanent mold release agent. It is a
silicone-based coating that has been proven to increase
productivity and improve tire aesthetics. It is a white aqueous
emulsion that cures to a clear, glossy coating which offers
superior lubricity. RE-505 does not contain aromatic or
chlorinated solvents.

RE-505是一种半永久性脱模剂。它是一种有机硅涂层，实
践证明，它能提高生产率，改善产品外观。RE-505为白色
水乳液，可硫化为光滑、透明的涂层，润滑性出色。RE505不含芳香溶剂或氯化溶剂。

Features

特点

Easy to apply
Excellent lubricity

涂抹方便
润滑性出色

Properties

特性

pH Value:
8.0 - 11.0
Viscosity:

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

RE-505 is a “ready to use” product and does not require
further dilution. RE-505 is applied to the mold or uncured tire
using a light spray or brush (swab).
New molds should be clean and uncontaminated, otherwise,
improper bonding of the coating will occur and its
effectiveness will be reduced. Please ensure that the exposed
surface is fully covered after coating has dried. The coating
will cure by the heat of the first tire molding. Over-coating of
RE-505 should be avoided or else excessive release agent will
result in contamination and drawback. The number of cycles
between applications depends on application efficiency, curing
time, curing temperature, tire construction, and composition.

RE-505属于即开即用型产品，无需进行稀释。使用轻型喷
雾器或刷子（拭子），可将RE-505涂抹在模具或未硫化橡
胶上。
新模具应进行清洁，彻底去除污物，否则会使涂层无法完
全粘合，从而导致产品效用下降。请确保涂层干燥后能完
全覆盖所有裸露在外的表面。涂层在第一次轮胎膜塑时受
热硫化。RE-505应避免喷涂过量，否则过量脱模剂将造成
污染和瑕疵。根据不同涂抹效率、硫化时间、硫化温度、
轮胎结构和成分，可确定经过几个硫化期后需再次涂抹。

Storage

储存

freezing.


asiakote.com
16

白色乳状液体
8.0 - 11.0
9% - 15%
0.8 - 1.2
8 - 50秒（4号福特杯）

HYTOX-300 High Temperature Grease 高温润滑脂
Process Step:
Application:

Vulcanization
Curing Mold

加工步骤:
应用:

硫化
硫化模具

Description

说明

HYTOX-300 is a high quality grease that provides solution to
lubrication problems when dealing with high temperatures of
up to 230oC. It is made with perfluoroalkly ether, PTFE, MoA,
and polyurea. It can be applied to the tire mold, specifically
the section mold container.

HYTOX-300是一种高品质润滑脂，能解决在温度高达
230oC时出现的多种润滑问题。其构成成分包括全氟烷基
醚、PTFE、MoA和聚脲。适用于轮胎模具，尤其适用于截
面模具，尤其适用于截面模具容器。

Features

特点

Very high load carrying ability
Superior thermal and chemical stability
Superior oxidation stability
Extends the life of bearings

承载能力极高
热稳定性和化学稳定性出色
氧化稳定性优异
延长轴承使用寿命

Properties

特性

Form / Color: Beige solid
Service Temperature: -30oC to 200oC (short period of 230oC)
Specific Gravity: 1.3
Consistency:
NLGI No.2
Worked Penetration: 265 - 295
Dropping Point: > 250oC
Copper Corrosion: 1a
Water Resistance: 0 - 90
Four Ball Welding Load: > 350 kg
Base Oil:
PFAE / Polyester
Base Oil Viscosity (40oC/100oC): 320 cps / 25 cps
Thickener:
Polyurea

外观/颜色：米色润滑脂
工作温度：
-30oC至200oC（短时间内可为230oC）
比重：
1.3
稠度：
NLGI No.2
工作锥入度： 265 - 295
滴点：
> 250oC
铜腐蚀性：
1a
耐水性：
0 - 90
烧结负荷（四球法）：> 350 kg
基油：
PFAE/聚酯
基油粘度（40oC/100oC）：320厘泊/25厘泊
增稠剂：
聚脲

Other Field Application

其他应用领域

Painting Shop: Skid conveyor, load rollers in power chain, and
load rollers in free trolley
Fan motor bearing and journal bearing in high temperature air
circulation
Long chain load rollers in automatic bread baking machine
Textile machines: 1) stenter, heat-setting and drying machines,
roller bearings in clip chain; cylinder bearings in cylinder
dryer; 3) internal reversing roller bearings in streamer; 4) fan,
roller, drum and shaft bearing in steamer; and 5) calendar roll
journal bearings in roller calendar machine.

涂装车间：滑橇输送机、动力传动链和移动滑车中的承载
辊。
在高温空气流通中使用的风扇电机轴承和径向轴承
自动面包机中的长链承载托辊。
纺织机：1)拉幅机，热定型和烘干机，夹链中的托辊轴
承；2)滚筒干燥机中的滚筒轴承；3)蒸箱中的内部回送辊
轴承；4)蒸箱中的风扇、托辊、滚筒和轴承；5)托辊压延
机中的压延托辊径向轴承。

Storage

储存

Up to 12 months when stored in fresh, indoor and covered

最长储存时间为十二（12）个月，产品应储存在原密封容
器中，置于室内或遮蔽处，环境须保持干燥和空气流通。
储存温度：-20oC至+60oC。

asiakote.com
17

RE-1000GTI Green Tire Inside Paint 胎坯内隔离剂
Process Step:
Application:

Vulcanization
Green Tire - Inside

加工步骤:
应用:

硫化
胎坯 - 内表面

Description

说明

RE-1000GTI is a green tire inner liner paint formulated to
serve as a release agent during the curing process. The
aqueous dispersions are silicone emulsion-based and is more
economical to use compared to its solvent-based equivalent.
RE-1000GTI is designed to provide outstanding lubricity with
good air bleed properties, and hence, ensuring productivity
and minimizing reject rate.

RE-1000GTI是一种胎坯内隔离剂，可作为硫化过程中的脱
模剂使用。这是一种水剂型有机硅乳液离型剂，与溶剂型
脱模剂相比，其性价比更高。RE-1000GTI具有出色的润滑
性和良好的透气性，在保证生产效率的同时，能最大限度
地降低废品率。

Features

特点

Easy to use and excellent adherence to the inner liner of green
tire
Uniformity of appearance
High thermal stability
Minimal dusting
Does not contain volatile organic compounds (VOC)
Non-flammable

使用方便，与胎坯内表面的粘合性好
外观均匀
热稳定性高
粉尘量降至最低
不含挥发性有机化合物（VOC）
不可燃

Properties

特性

Form / Color: Grey, black liquid
pH Value:
7.0 - 10.0
Viscosity:
800 - 4,000 cps (Brookfield #2, 3 rpm)

外观/颜色：
pH值:
固体含量：
比重：
粘度：

Application

应用

RE-1000GTI is a “ready to use” product and does not require
further dilution. RE-1000GTI can be applied by spraying or
brushing on the green tire inner liner and letting it air-dry for
approximately 10 - 30 minutes.
Before its application, RE-1000GTI should be homogenized and
agitated (10 or 20 rpm) in its original container or by rolling
of the drum for 20 minutes. In normal circumstances, it is
sufficient to just use 10 - 20 gram of RE-1000GTI per passenger
tire. Depending on the viscosity of the final product ordered,
occasional mixing is required during the normal period of
usage. Clean spraying systems thoroughly when switching
from solvent-based to aqueous-based tire release agent, as
the two types are incompatible.

RE-1000GTI属于即开即用型产品，无需进行稀释，即可直
接喷涂或涂刷在生胶轮胎内表面，干燥时间在10 - 30分钟
不等。
涂抹之前，应先将RE-1000GTI在原容器中进行均匀搅拌
（10或20rpm），或转动滚筒20分钟。正常情况下，每只
轿车轮胎只需喷涂10 - 20克RE-1000GTI即可。根据所订购
最终产品的粘度，正常使用期间可能需要不时进行混合。
由于两种溶剂互不相溶，从溶剂型脱模剂转为使用水剂型
脱模剂时，须彻底清洁喷涂系统。

Storage

储存

freezing.


asiakote.com
18

灰黑色液体
7.0 - 10.0
10% - 45%
1.0 - 1.3
800 - 4,000厘泊（博力飞#2, 3 rpm）

RE-389GIP Green Tire Inside Paint 胎坯内隔离剂
Process Step:
Application:

Vulcanization
Green Tire - Inside

加工步骤:
应用:

硫化
胎坯 - 内表面

Description

说明

RE-389GIP is a green tire inner liner paint formulated to serve
as a release agent during the curing process. It is filler-free
product based on a newly developed modified reactive
silicone polymers emulsion. The RE-389GIP can accommodate
all types of tire. RE-389GIP is designed to provide outstanding
lubricity with good air bleed properties, and hence, ensuring
productivity and minimizing reject rate. RE-389GIP does not
contain volatile organic compounds (VOC).

RE-389GIP是一种胎坯内隔离剂，可作为硫化过程中的脱模
剂使用。此产品基于新开发的改良型活性有机硅聚合物乳
液，不含填充剂。RE-389GIP适用于所有类型的轮胎。RE389GIP具有出色的润滑性和良好的透气性，在保证生产效
率的同时，能最大限度地降低废品率。RE-389GIP不含挥发
性有机化合物（VOC）。

Features

特点

Easy to use and excellent adherence to the inner liner of green
tire
Uniformity of appearance
No dusting
Non-flammable and environmentally friendly

使用方便，与胎坯内表面的粘合性好
外观均匀
热稳定性高
无粉尘
不可燃，环保

Properties

特性

Form / Color:
pH Value:
Solid Content:
Specific Gravity:
Viscosity:

Light brown liquid
8.0 - 10.0
10% - 35%
1.0 - 1.2

外观/颜色：
pH值：
固体含量：
比重：
粘度：

浅褐色液体
8.0 - 10.0
10% - 35%
1.0 - 1.2
1,000 - 2,000厘泊（博力飞#2, 3 rpm）

Application

应用

RE-389GIP is a “ready to use” product and does not require
additional dilution. RE-389GIP can be applied by spraying or
brushing on the green tire inner liner and letting it air-dry for
approximately 10 - 30 minutes.
Before its application, RE-389GIP should be homogenized
and agitated (10 or 20 rpm) in its original container or by
rolling of drum for 20 minutes. In normal circumstances, it is
sufficient to just use 10 - 20 gram of RE-389GIP per passenger
tire. Depending on the viscosity of the final product ordered,
occasional mixing is required during the normal period of
usage. Clean spraying systems thoroughly when switching
from solvent-based to aqueous-based tire release agent, as
the two types are incompatible.

RE-389GIP属于即开即用型产品，无需进行稀释，即可直接
喷涂或涂刷在胎坯内表面，干燥时间在10 - 30分钟不等。
涂抹之前，应先将RE-389GIP在原容器中进行均匀搅拌（10
或20rpm），或转动滚筒20分钟。正常情况下，每只轿车
轮胎只需喷涂10 - 20克RE-389GIP即可。根据所订购最终产
品的粘度，正常使用期间可能需要不时进行混合。由于两
种溶剂互不相溶，从溶剂型脱模剂转为使用水剂型脱模剂
时，须彻底清洁喷涂系统。

Storage

储存

freezing.


asiakote.com
19

RE-100GOP Green Tire Outside Paint 胎坯外隔离剂
Process Step:
Application:

Vulcanization

加工步骤:
应用:

硫化
胎坯 - 外表面

Description

说明

RE-100GOP is a green tire outside paint formulated for the
sidewall of the green tire to enhance a uniform external tire
surface with minimal molding defects. RE-100GOP is designed
to provide excellent air bleed tire to provide exterior flawless
appearance and uniform surface finish. Hence, this produces
tires with uniform surface quality without any defect or
cracks. Since RE-100GOP is an aqueous dispersion emulsion
with longer lifetime and lower consumption compared to its
solvent-based equivalent.

RE-100GOP是一种用于胎坯胎侧的胎坯外隔离剂，可提
高轮胎外表面的均匀性，使模塑时产生的缺陷最少。RE100GOP专用于生产排气性良好优质轮胎，且确保其外观无
可挑剔，表面均匀光洁。涂抹本产品后，轮胎表面质量统
一，不存在缺陷或裂纹。RE-100GOP为水剂型乳液，与同
类溶剂型产品相比，其使用寿命更长，用量更少。

Features

特点

Enhanced rubber flow
Uniformity of appearance and minimized sidewall defect
Minimal staining on clothing or gloves
Reduces mold contamination

提高橡胶流动性
外观均匀，最大限度地减少胎侧缺陷
在抹布或手套上留下的污渍最少
热稳定性高
减少了模具污染
不可燃，环保

Properties

特性

Form / Color: Black liquid
pH Value:
8.0 - 10.0
Viscosity:
200 - 600 cps (Brookfield #2, 3 rpm)

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

RE-100GOP is a “ready to use” product and does not
require further dilution. RE-100GOP is applied at ambient
temperatures by spraying (airless or pneumatic equipment)
or brushing on the sidewall or tread. Application on the tread
provides a professional uniform finish and gives the tire a
higher retail value.
RE-100GOP is economical to use, requiring only 10 - 20 gram
per passenger tire. RE-100GOP should be agitated at 10 - 20
rpm for 10 - 15 minutes before use. This product dries in
approximately 10 - 30 minutes at ambient temperatures
depending on coating weight. Coating weight will depend on
process requirements and tire size. Clean spraying systems
thoroughly when switching from solvent-based to aqueousbased tire release agent, as the two types are incompatible.

RE-100GOP属于即开即用型产品，无需进行稀释。RE100GOP可在环境温度下，通过喷涂或刷涂的方式涂在胎坯
胎面或胎侧。涂抹在胎面上可使轮胎的均匀性和光洁度符
合专业水准，提高轮胎零售价格。
RE-100GOP用量非常经济，每只轿车轮胎只需喷涂10 - 20
克即可。喷涂之前，应先将RE-100GOP以10 - 20 rpm的速
度搅拌10 - 15分钟。产品在环境温度下的干燥时间在10 30分钟不等，具体取决于涂层重量。而涂层重量又取决于
加工要求和轮胎尺寸。由于两种溶剂互不相溶，从溶剂型
脱模剂转为使用水剂型脱模剂时，须彻底清洁喷涂系统。

Storage

储存

freezing.


asiakote.com
20

黑色液体
8.0 - 10.0
10% - 35%
0.9 - 1.1
200 - 600厘泊（博力飞#2, 3 rpm）

RE-100GOP-W Green Tire Outside Paint 胎坯外隔离剂
Process Step:
Application:

Vulcanization

加工步骤:
应用:

硫化
胎坯 - 外表面

Description

说明

RE-100GOP-W is a green tire outside paint formulated for
the sidewall of the green tire to enhance a uniform external
tire surface with minimal molding defects. RE-100GOP-W is
designed to provide excellent air bleed tire to provide exterior
flawless appearance and uniform surface finish. Hence, this
produces tires with uniform surface quality without any
defect or cracks. Since RE-100GOP-W is an aqueous dispersion
emulsion with longer lifetime and lower consumption
compared to its solvent-based equivalent. As the product
becomes clear after vulcanization, it will not cover the printed
bar code or marked lines.

RE-100GOP-W是一种用于胎坯胎侧的胎坯外隔离剂，可提
高轮胎外表面的均匀性，使模塑时产生的缺陷最少。RE100GOP-W专用于生产排气性良好优质轮胎，且确保其外
观无可挑剔，表面均匀光洁。涂抹本产品后，轮胎表面质
量统一，不存在缺陷或裂纹。RE-100GOP-W为水剂型乳
液，与同类溶剂型产品相比，其使用寿命更长，用量更
少。干燥前呈乳白色薄膜,硫化后清晰将不影响标识线。

Features

特点

Uniformity of appearance and minimized sidewall defect
Minimal staining on clothing or gloves
Reduces mold contamination

外观均匀，最大限度地减少胎侧缺陷
在抹布或手套上留下的污渍最少
热稳定性高
减少了模具污染
不可燃，环保

Properties

特性

pH Value:
7.0 - 9.0
Viscosity:
20 - 150 sec (Ford Cup #4)

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

RE-100GOP-W is a “ready to use” product and does not
require further dilution. RE-100GOP-W is applied at ambient
temperatures by spraying (airless or pneumatic equipment)
or brushing on the sidewall or tread. RE-100GOP-W will
create a milky film upon drying and will become clear upon
vulcanization. RE-100GOP-W is economical to use, requiring
only 10 - 20 gram per passenger tire. RE-100GOP-W should be
agitated at 10 - 20 rpm for 10 - 15 minutes before use. It dries
in approximately 10 - 30 minutes at ambient temperatures
depending on coating weight which in turns depends on
process and tire size. Clean spraying systems thoroughly when
switching from solvent-based to aqueous-based tire release
agent, as the two types are incompatible.

RE-100GOP-W属于即开即用型产品，无需进行稀释。RE100GOP-W可在环境温度下，通过喷涂或刷涂的方式涂在
胎坯胎面或胎侧。涂抹在胎面上可使轮胎的均匀性和光洁
度符合专业水准，提高轮胎零售价格。RE100GOP-W干燥
前呈乳白色薄膜,硫化后清晰。RE-100GOP-W用量非常经
济，每只轿车轮胎只需喷涂10 - 20克即可。喷涂之前，应
先将RE-100GOP-W以10 - 20 rpm的速度搅拌10 - 15分钟。
产品在环境温度下的干燥时间在10 - 30分钟不等，具体取
决于涂层重量。而涂层重量又取决于加工要求和轮胎尺
寸。由于两种溶剂互不相溶，从溶剂型脱模剂转为使用水
剂型脱模剂时，须彻底清洁喷涂系统。

Storage

储存

freezing.


白色,乳状液体
7.0 - 9.0
10% - 15%
0.9 - 1.1
20 - 150秒（4号福特杯）

asiakote.com
21

RE-3415 Trimming Lubricant 修边润滑剂
Process Step:
Application:

Finishing
Trimming Machine

加工步骤:
应用:

成品
修边机

Description

说明

RE-3415 is an anti-corrosive and anti-abrasive lubricant
that is primarily used in the rubber manufacturing process.
During the vulcanization process, hot air is removed through
a large number of vent holes in the mold. This creates excess
rubber on the tires that are cut off using a trimming machine.
RE-3415 is a lubricant especially designed for this trimming
machine.

RE-3415是一种耐磨、耐腐蚀润滑剂，主要用于橡胶和塑料
生产工艺过程。在硫化过程中，热空气会通过模具中的大
量通风孔排出。而这会造成轮胎上出现多余的橡胶，需使
用修边机切除。RE-3415就是专用于修边机的润滑剂。

Features

特点

Anti-corrosive
Good lubricity, preventing abrasion to tools and machines
High product stability at wide temperature range (low viscosity
index and very low pour point)
Non-hazardous
Biodegradable and environmental friendly

耐腐蚀
润滑性良好，能防止刀具和机器磨损
在很宽的温度范围内，产品具有较高的稳定性（粘度指数
低，倾点超低）
无危险
环保、可生物降解

Properties

特性

Form / Color: Clear light yellow liquid
Anticorrosion: 24 hr x 6 day minimum
Flash Point:
290oC
Pour Point:
-18oC
Viscosity (40oC): 50 cps (Brookfield #2, 3 rpm)
Viscosity Index: 198

外观/颜色：浅黄色透明液体
耐腐蚀性：
至少6个全天
燃点：
290oC
倾点：
-18oC
比重：
0.8 - 0.9
粘度（40oC）： 50厘泊（博力飞 #2, 3 rpm）
粘度指数：
198

Application

应用

RE-3415 can be applied by spraying.

RE-3415可能过喷涂方式进行涂抹。

Storage

储存



asiakote.com
22

RE-3415-A Trimming Lubricant 修边润滑剂
Process Step:
Application:

Finishing
Trimming Machine

加工步骤:
应用:

成品
修边机

Description

说明

RE-3415-A is an anti-corrosive and anti-abrasive lubricant
that is primarily used in the rubber manufacturing process.
During the vulcanization process, hot air is removed through
a large number of vent holes in the mold. This creates excess
rubber on the tires that are cut off using a trimming machine.
RE-3415-A is water-based lubricant especially designed for this
trimming machine.

RE-3415-A是一种耐磨、耐腐蚀润滑剂，主要用于橡胶和塑
料生产工艺过程。在硫化过程中，热空气会通过模具中的
大量通风孔排出。而这会造成轮胎上出现多余的橡胶，需
使用修边机切除。RE-3415-A就是专用于修边机的水性润滑
剂。

Features

特点

Anti-corrosive
Good lubricity, preventing abrasion to tools and machines
High product stability at wide temperature range (low viscosity
index and very low pour point)
Non-hazardous
Non-flammable and environmental friendly

耐腐蚀
润滑性良好，能防止刀具和机器磨损
在很宽的温度范围内，产品具有较高的稳定性
无危险
不可燃，环保

Properties

特性

pH Value:
7.0 - 9.0

外观/颜色：
pH值：
固体含量：
比重：

Application

应用

RE-3415-A can be applied by spraying.

RE-3415-A可能过喷涂方式进行涂抹。

Storage

储存

freezing.


白色乳状液体
7.0 - 9.0
6% - 10%
0.9 - 1.1

asiakote.com
23

RE-20008M Tire Bead Release Agent 轮胎胎圈润滑剂
Process Step:
Application:

Finishing
Finished Tire Bead (Uniformity Testing)

加工步骤:
应用:

成品
成品轮胎胎圈（均匀性试验）

Description

说明

RE-20008M is formulated to provide ease of mounting and
release of the tire from the rim on the uniformity test machine
during the tire balancing process. RE-20008M is soluble in
both hard and soft water and may be used in fully automatic
spray systems or handheld unit. In the past, silicone-emulsionor petroleum-based lubricants have been used to serve as
a release agent to ensure ease of installation and release
between the rim and the bead of the tire. Silicone-emulsionor petroleum-based lubricants provide good releasability and
slippery properties. However, silicone- or petroleum-based
lubricant may cause the tire to slip on the rim. RE-20008M,
a water-soluble polymer, does not have the above slippery
effect or the disadvantage of toxic smell of silicone- or
petroleum-based products.

RE-20008M专用于轮胎平衡工艺中，在均匀性试验机上方
便地将轮胎安装到轮辋或从轮辋拆卸轮胎。RE-20008M可
溶于硬水和软水，能通过全自动喷涂系统或手持设备进
行涂抹。过去，是将有机硅乳液或石油类润滑剂用作脱模
剂，来确保方便地轮辋和轮边的安装和拆卸。有机硅乳液
或石油类润滑剂具有良好的脱模性和滑动性。但是,有机硅
或石油类润滑剂会导致轮胎在轮辋上滑动。而RE-20008M
水剂型聚合物则不会产生上述滑动问题，也克服了有机硅
乳液和石油类润滑剂会散发有毒气体的缺点。

Features

特点

Excellent release
Non-staining
Good compatibility
Excellent paintability

脱模性能出色
无污染物
适用性强
喷涂性能出色
不可燃，环保

Properties

特性

Form / Color:
pH Value:
Solid Content:
Specific Gravity:
Viscosity:

White, milky liquid
7.0 - 10.0
1% - 3%
0.9 - 1.1

外观/颜色：
pH值：
固体含量：
比重：
粘度：

白色乳脂状液体
7.0 - 10.0
1% - 3%
0.9 - 1.1
8 - 30秒（4号福特杯）

Application

应用

RE-20008M is a “ready to use” product and does not require
additional dilution. RE-20008M is applied on the bead side of
the tire.

RE-20008M属于即开即用型产品，无需进行稀释。RE20008M适用于轮胎胎圈。

Storage

储存

freezing.


asiakote.com
24

TD-100-B Outside Tire Finishing Paint 轮胎外表面修整漆
Process Step:
Application:

Finishing

加工步骤:
应用:

成品
成品轮胎胎侧

Description

说明

TD-100-B is a water-polymer paint designed to enhance and
improve tire appearance. It is used for masking minor defects,
cosmetic touch-up and buffing on the finished tires in order
to improve the tire aesthetics. The spraying on the tread is to
provide a professional uniform finish and to give the tire an
added value.

TD-100-B是一种黑色水剂型聚合物漆，专用于强化并改善
轮胎外观。它通过对成品轮胎进行局部修饰、抛光和修整
来改善轮胎外观。在胎面上喷涂可使轮胎均匀性和光洁度
符合专业水准，提高轮胎附加值。

Features

特点

Compatible with all rubber types
Good wetting and dispersion properties
Economical to use
Easy to apply
Non-staining

适用于所有类型轮胎
润湿性和扩散性良好
性价比高
涂抹方便
无污染物
不可燃，环保

Properties

特性

pH Value:
7.5 - 10.0
Viscosity:

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

TD-100-B is a “ready to use” product and does not require
additional dilution. TD-100-B is normally applied on the tire
sidewall and may be sprayed on the tread as well.
TD-100-B should be homogenized before use. However, no
further agitation is required during usage. Prior to application,
the sidewall to be applied with TD-100-B has to be clean-off
from dirt, dust, oil or other contaminants.

TD-100-B属于即开即用型产品，无需进行稀释。TD-100-B
通常涂抹在胎侧，也可喷涂在胎面上。
TD-100-B在使用前应搅拌均匀。但在使用过程中无需再进
行搅拌。在涂抹之前，应先对待涂抹TD-100-B的胎侧进行
清理，除去污垢、灰尘、油渍或其他污物。

Storage

储存

freezing.


黑色液体
7.5 - 10.0
14% - 35%
1.0 - 1.2
8 - 30秒（4号福特杯）

asiakote.com
25

TD-100-S Outside Tire Finishing Paint 轮胎外表面修整漆
Process Step:
Application:

Finishing

加工步骤:
应用:

成品
成品轮胎胎侧

Description

说明

TD-100-S is a clear, solvent-based paint designed to enhance
and improve tire appearance. It is used as anti-aging agent
and used for masking minor defects, cosmetic touch-up,
and buffing on the finished tires in order to improve the
tire aesthetics. The spraying on the tread is to provide a
professional uniform finish and to give the tire an added value.

TD-100-S是一种透明油剂型聚合物漆，专用于强化并改善

Features

特点

Economical to use
Easy to apply
Non-staining
Minimal odor

性价比高
涂抹方便
无污染物
微小气味

Properties

特性

Form / Color: Clear liquid
Viscosity:

外观/颜色：
固体含量：
比重：
粘度：

Application

应用

TD-100-S is a “ready to use” product and does not require
additional dilution. TD-100-S is normally applied on the tire
TD-100-S should be homogenized before use. However, no
the sidewall to be applied with TD-100-S has to be clean-off

TD-100-S属于即开即用型产品，无需进行稀释。TD-100-S
通常涂抹在胎侧，也可喷涂在胎面上。
TD-100-S在使用前应搅拌均匀。但在使用过程中无需再进
行搅拌。在涂抹之前，应先对待涂抹TD-100-S的胎侧进行

Storage

储存



asiakote.com
26

透明液体
2% - 5%
0.7 - 0.9
8 - 50秒（4号福特杯）

TD-100-W Outside Tire Finishing Paint 轮胎外表面修整漆
Process Step:
Application:

Finishing

加工步骤:
应用:

成品
成品轮胎胎侧

Description

说明

TD-100-W is a water-polymer paint designed to enhance
and improve tire appearance. It is used as anti-aging agent
and used for masking minor defects, cosmetic touch-up
and buffing on the finished tires in order to improve the
tire aesthetics. The spraying on the tread is to provide a
professional uniform finish and to give the tire an added value.

TD-100-W是一种白色水剂型聚合物漆，专用于强化并改善

Features

特点

Economical to use
Easy to apply
Non-staining

性价比高
涂抹方便
无污染物
不可燃，环保

Properties

特性

pH Value:
7.0 - 10.0
Viscosity:

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

TD-100-W is a “ready to use” product and does not require
additional dilution. TD-100-W is normally applied on the tire
TD-100-W should be homogenized before use. However, no
the sidewall to be applied with TD-100-W has to be clean-off

TD-100-W属于即开即用型产品，无需进行稀释。TD100-W通常涂抹在胎侧，也可喷涂在胎面上。
TD-100-W在使用前应搅拌均匀。但在使用过程中无需再进
行搅拌。在涂抹之前，应先对待涂抹TD-100-W的胎侧进行

Storage

储存

freezing.


白色乳脂状液体
7.0 - 10.0
2% - 7%
0.9 - 1.1
8 - 30秒（4号福特杯）

asiakote.com
27

BP-800 Sidewall Protective Paint 胎侧保护漆
Process Step:
Application:

Finishing

加工步骤:
应用:

成品
成品轮胎胎侧

Description

说明

BP-800 provides anti-abrasive and anti-oxidation protection
and prevents contamination of the white rubber band of tires
during the transportation to its final destination. BP-800 can
then be easily washed out by the customer for improved tire
aesthetics. BP-800 assists in maintaining tires new look after
rigorous shipping and handling.

BP-800可为白色橡胶轮箍提供耐磨、耐氧化保护，在轮胎
运往最终目的地的过程中，保护白色胎箍不受污染。运抵
目的地后，客户用水便能轻松洗去BP-800，使轮胎更加美
观。在恶劣的运输和搬运环境中，BP-800有助于使轮胎始
终保持全新外观。

Features

特点

Easy to wash-out
Excellent anti-abrasive and anti-contamination properties
High chemical stability and inertness

能轻松洗去
耐磨、耐脏性能出色
化学稳定性高，惰性强

Properties

特性

Form / Color: Blue liquid
pH Value:
6.0 - 8.0
Viscosity:
400 - 800 cps (Brookfield #2, 3 rpm)

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

BP-800 is a “ready to use” product and does not require
additional dilution. BP-800 can be applied by spraying or
brushing on the white rubber band of the tire.
Before its application, BP-800 should be homogenized and

BP-800属于即开即用型产品，无需进行稀释。BP-800可通
过喷涂和刷涂方式涂抹在白色胎箍上。
涂抹之前，应先将BP-800在原容器中进行缓慢均匀搅拌。

Storage

储存

freezing.


asiakote.com
28

蓝色液体
6.0 - 8.0
18% - 22%
0.9 - 1.1
400 - 800厘泊（博力飞 #2, 3 rpm）

AD-901 Tire Label Adhesive 标签粘合剂
Process Step:
Application:

Finishing

加工步骤:
应用:

成品
成品轮胎的胎面

Description

说明

AD-901 is a water-based adhesive that improves the stickiness
of labels onto tires. Due to its high tack and its affinity for
rubber, AD-901 assists in maintaining the aesthetic of the tire
label after rigorous shipping and handling.

AD-901是一种水基胶粘剂，改善贴在轮胎的标签的粘着
性。AD-901对橡胶有很高的粘接性和亲和性，可以使轮胎
标签在恶劣的运输和搬运之后仍能保持美观。

Features

特点

High tack and strong affinity for rubber
Easy to apply
Minimal staining upon removal

对橡胶有很高的粘接性和很强的亲合力
涂抹方便
去除标签后几乎不留痕迹
不可燃，环保

Properties

特性

pH Value:
8.0 - 10.0
Viscosity:

外观/颜色：
pH值：
固体含量：
比重：
粘度：

Application

应用

AD-901 is a “ready to use” product and does not require
additional dilution. AD-901 can be applied by spraying or
brushing on the tread or the sidewall of the finished tires.
Before its application, AD-901 should be homogenized and

AD-901属于即开即用型产品，无需进行稀释。AD-901可能
过喷涂或涂刷在成品轮胎的胎面和胎侧。
涂抹之前，应先将AD-901在原容器中进行缓慢均匀搅拌。

Storage

储存

freezing.


黑色液体
8.0 - 10.0
8% - 15%
0.9 - 1.1
10 - 15秒（4号福特杯）

asiakote.com
29

Customers 我们的客户

asiakote.com
30

Group 集团
Korea 韩国 한국

KCT Co., Ltd.
(주)한국켐툴

#343-1 Gumam-Ri Dongmyung-Myun
Chilgok-Gun Kyungbuk 718-920, Korea
경북 칠곡군 동명면 금암리343-1
Tel / 전화: +82 (54) 976-2600
Fax / 팩스: +82 (54) 976-2626
Indonesia 印度尼西亚

PT. Global Lubriutama

Jl. Jembatan Tiga No. 36HN
Jakarta Utara 14440, Indonesia
Tel: +62 (21) 661-7252
Fax: +62 (21) 661-1184
China 中国

Global Fine Chemicals (Shanghai) Co., Ltd.
高格博精细化工（上海）有限公司
1955 Zhu Dai Lu, Waigang, Jiading
Shanghai 201806, China
中国上海市嘉定区外冈镇朱戴路1955号
Postal Code / 邮编: 201806
Tel / 电话: +86 (21) 6957-7960
Fax / 传真: +86 (21) 6957-7950

Distributors 总代理
Thailand 泰国 ประเทศไทย

Triton Bizchem Co., Ltd.
บริษัท ไทรทัน บิซเคมส์ จำ�กัด

39/36 Soi Phrayasuren 40
Samwatawantok, Klongsamwa
Bangkok 10510 Thailand
39/36 ซอยพระยาสุเรนทร์ 40
แขวงสามวาตะวันตก, เขตคลองสามวา
กรุงเทพมหานคร 10510 ประเทศไทย
Tel / โทร: +66 (2) 907-3515, 907-3516
Fax / แฟกซ์: +66 (2) 907-3517

asiakote.com
info@asiakote.com

© 2009 - 2013 KCT, Global Lubriutama, Global Fine Chemicals
All Rights Reserved. Published July 2013
Designed and created by Winston Ng

Tire Release Agent and Marking Paint Catalog

Recommended

Recommended

More Related Content

What's hot

What's hot (19)

Similar to Tire Release Agent and Marking Paint Catalog

Similar to Tire Release Agent and Marking Paint Catalog (20)

Recently uploaded

Recently uploaded (20)

Tire Release Agent and Marking Paint Catalog