Spooky2 has released new full presets for the terrain protocol, including options for remote, plasma, and contact use. Users can run combinations of these presets with one or two generators, following specific schedules and instructions. The official support and purchasing websites are provided for further assistance.

1. Spooky2
The Terrain Protocol Presets
Our Users & Team

2. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Spooky2 has new full presets for the Terrain protocol, “Terrain (R) - BY” for
remote, “Terrain (P) - BY” for plasma and “Terrain (C) - BY” for contact.
“Terrain (R) - BY” can be run by itself, and it takes 11 days. With 2
generators, “Terrain (R) - BY” can be run with either “Terrain (P) - BY” OR
“Terrain (C) - BY”.

3. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
2 Generator Plasma (or Contact) and Remote
Running the Presets

4. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Generator 1 runs either the Terrain (P) - BY or Terrain (C) - BY. Generator 2
runs Terrain (R) - BY. While Generator 1 is connected to either the plasma or
contact hardware, you run 2 sets a day as specified in the Generator 1 column
in the table above. Each plasma/contact set lasts 2 hours, and is followed by a
3 minute beep. Optionally you can repeat each set more than once, spread out
through the day. Run the first set the first thing in the morning, then 6-12 hours
later run the second set. Generator 2 is connected to the Spooky2 Remote
hardware, with or without Spooky Boost.

5. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
If you only have one generator, twice each day you connect the plasma or
contact hardware to your generator, and run the program specified in the
Generator 1 column of the table above. After you finish each plasma or
contact set, safely disconnect the plasma/contact hardware from your
generator and then connect Spooky Remote hardware to the generator,
and run the corresponding set from “Remote Terrain Protocol - BY”.
1 Generator Plasma (or Contact) and Remote

6. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Simply run “Remote Terrain Protocol - BY” on your generator with the
Spooky Remote hardware for 11 days or more (the preset repeats itself
after 11 days), with or without Spooky Boost.
1 Generator Remote only

7. Official Support Website: www.spooky2.com
Official Purchasing Website: www.spooky2-mall.com
Email:echolee@cleanenergy-npt.com
or service@spooky2.com
Thank you!