Why You May Not Feel Contact Frequencies During Spooky2 Sessions
•Download as PPTX, PDF•
0 likes•207 views
The document discusses reasons why a person may not feel anything during a contact session with a Spooky2 device. It lists seven factors that determine whether a frequency can be felt: 1) frequencies over 10kHz cannot be felt, 2) a minimum amplitude of 14V is needed, 3) the CS port reduces tingling, 4) reducing amplitude for frequencies under 10kHz decreases sensitivity, 5) individual sensitivity varies, 6) hydration affects current flow, and 7) the Spooky Central contact mode uses ultra-short high voltage pulses that cannot be felt. The document provides guidance on understanding why a user may not sense contact frequencies during a session.
Recommended
Recommended
More Related Content
Viewers also liked
Viewers also liked (17)
More from Spooky2 Rife
More from Spooky2 Rife (20)
Recently uploaded
Recently uploaded (20)
Why You May Not Feel Contact Frequencies During Spooky2 Sessions
- 1. Spooky2 Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Why I Don't Feel Anything During The Contact Session
- 2. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com There are many factors that determine whether someone feels the contact frequencies... The first is the frequencies themselves. Any over 10KHz shoud not be felt by anyone,only those less that 10K should resonate with nerves... The second factor is the amplitude. We need a minimum of 14V to penetrate the skin and be effective, but can use up to 20 with the XM generator.
- 3. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com The third, is whether you are using the CS port or the Hi Pwr port on the Boost unit... The added resistor in the CS port circuit reduces any tingling so it generally isn’t bothersome. Fourth, there is also a "Reduce Amplitude for Frequencies less than 10KHz in the software settings... If this is checked, it is also going to reduce the ability to sense the frequency... Fifth, some people are not as sensitive as others and it is just not a problem for them...
- 4. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Sixth, hydration levels have an effect on how easily the current flows within the body and can affect whether the signal is perceptible... Seventh, you would not feel anything when you use Spooky Central contact mode. The TENS pads connected to the SC is a fixed 100 Hz ultrashort voltage spike of 320v, which is very high, but the duration of the pulse is extremely short. You will not feel it no matter what you try.
- 5. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com There may be others, but this should give you some idea... Source: https://www.facebook.com/groups/spooky2/permalink/662004077294832/
- 6. Official Support Website: www.spooky2.com Official Purchasing Website: www.spooky2-mall.com Email:echolee@cleanenergy-npt.com or service@spooky2.com Thank you!