Design, development and testing of a wireless sensor network for medical appl...sudhakar5472
This document describes the design and development of a wireless sensor network for medical monitoring applications. The system uses ECG sensors interfaced with microcontrollers to transmit patient data via Zigbee wireless communication to a monitoring center consisting of a PC and GSM modem. If abnormal readings are detected, an alert message is sent to caregivers. The system allows for multiple patients to be monitored remotely in real-time, increasing independence for elderly patients while still providing medical assistance when needed.
The document describes a design for an embedded web-based remote monitoring system for laboratory environments. The system uses an ARM microprocessor as the main controller connected to sensor networks, cameras, and communication modules. An embedded Linux system and web server allow remote monitoring and management of environmental data and video images through a web browser. Managers can view data, control equipment, and receive alerts. The system was implemented and experimental results showed it effectively enabled remote monitoring and local management of laboratory environments.
Design, development and testing of a wireless sensor network for medical appl...sudhakar5472
This document describes the design and development of a wireless sensor network for medical monitoring applications. The system uses ECG sensors interfaced with microcontrollers to transmit patient data via Zigbee wireless communication to a monitoring center consisting of a PC and GSM modem. If abnormal readings are detected, an alert message is sent to caregivers. The system allows for multiple patients to be monitored remotely in real-time, increasing independence for elderly patients while still providing medical assistance when needed.
The document describes a design for an embedded web-based remote monitoring system for laboratory environments. The system uses an ARM microprocessor as the main controller connected to sensor networks, cameras, and communication modules. An embedded Linux system and web server allow remote monitoring and management of environmental data and video images through a web browser. Managers can view data, control equipment, and receive alerts. The system was implemented and experimental results showed it effectively enabled remote monitoring and local management of laboratory environments.
A passive radio frequency p h-sensing tag for wireless food-quality monitoringsudhakar5472
The document presents a wireless pH-sensing tag for monitoring food quality. The tag includes a flexible pH sensor integrated with wireless communication circuitry, allowing for convenient and long-term in situ monitoring of food quality from production to retail without batteries. The proposed system connects a pH sensor to a microcontroller that receives sensor data and sends it via Zigbee to a PC for display. It would allow food producers and retailers to remotely monitor produce pH levels to ensure safety and reduce waste.
A wearable inertial sensor node for body motion analysissudhakar5472
The document describes the design and implementation of a wearable wireless inertial sensor node for body motion analysis. A triaxial accelerometer, biaxial gyroscope, and yaw rate gyroscope are integrated onto a printed circuit board to sense accelerations and angular rates. The small, printed inverted-F antenna allows for comfortable wearing while maintaining reasonable performance. The sensor node can be adapted to applications with different power requirements through periodic and event-driven wakeup functions in the software. The sensor data is wirelessly transmitted to a PC for analysis and monitoring of body motions and behaviors.
The design and implementation of power earth line monitoring systemsudhakar5472
The document describes a proposed power earth-line monitoring system that uses GSM communications to collect, record, and display physical parameters of earth lines during power line construction and maintenance. The existing manual earth line inspection system is time-consuming and difficult for fault identification. The proposed system addresses this by using an intelligent earth monitor connected to a GSM modem to transmit earth line state data via short messages. When installed, it can detect if the earth line is connected or disconnected and display this information at a remote monitoring center. The system has hardware components like a microcontroller, sensors, and GSM modem and requires software like Embedded C and a VB program for monitoring.
A remote online monitoring system for damsudhakar5472
This document proposes a remote online monitoring system for dams that uses sensors to monitor parameters like temperature, displacement, load, and stress in real-time. The sensor data is sent via GPRS to a computer server where it is stored and analyzed. This allows dam conditions to be monitored centrally without needing manual on-site measurements. The proposed system interfaces sensors with a PIC microcontroller that sends abnormal sensor readings via GPRS. Authorized users can then access the sensor data remotely for monitoring dam safety.
This document proposes a remote online monitoring system for dams that uses sensors to monitor parameters like temperature, displacement, load, and stress in real-time. The sensor data is sent via GPRS to a computer server where it is stored and analyzed. This allows dam conditions to be monitored centrally without needing manual on-site measurements. The proposed system interfaces sensors with a PIC microcontroller that sends abnormal sensor readings via GPRS. Authorized users can then access the sensor data remotely for monitoring dam safety.
Ima an integrated monitoring architecture with sensor networkssudhakar5472
The document proposes an integrated monitoring architecture using sensor networks. It aims to address the difficulties of integrating heterogeneous monitoring systems that are commonly developed separately. The proposed system creates a common database to store parameters measured from two environments - living and industrial - using wireless sensor networks. Temperature, humidity, voltage, and current are measured by sensors and transmitted via Zigbee and PIC microcontrollers to the database section. Users can access the stored data by selecting an environment and providing login credentials.
Development of on line monitoring system of substation power equipment based ...sudhakar5472
The document proposes developing an online monitoring system for substation power equipment based on the IEEE1588 standard. This system would use a PIC microcontroller to sense temperature, current and voltage from sensors, store the data in EEPROM, and upload it to the internet via Ethernet. By implementing precise time synchronization between master and slave clocks over Ethernet using IEEE1588, the system allows real-time remote monitoring of substation status from anywhere.
Next generation system for real time monitoring of rainfall, soil moisture, a...sudhakar5472
The document proposes a next generation system for real-time monitoring of rainfall, soil moisture, and soil temperature. It describes an existing wired system and proposes a new wireless system using GSM/GPRS technology. The proposed system would use sensors to measure rainfall, soil temperature, and moisture connected to a PIC microcontroller. The microcontroller would send the sensor data via GSM/GPRS to the internet where users could access it through a web browser.
Research on water saving irrigation automatic control system based on interne...sudhakar5472
This document discusses the design of a wireless sensor network and internet-based automatic irrigation control system to improve irrigation water use efficiency. The system uses ZigBee technology to allow wireless communication between sensor nodes on farms and a central server node. Sensors measure soil moisture, temperature, and humidity. If levels go out of normal ranges, the microcontroller automatically controls irrigation valves to supply or stop water. Users can monitor sensor data and control irrigation remotely using mobile phones or a web interface. The system aims to intelligently automate irrigation and reduce water and labor costs compared to existing wired systems.
Design of on line interactive data acquisition and control system for embedde...sudhakar5472
This document discusses the design of an online interactive data acquisition and control system for embedded real-time applications. It proposes using an ARM-based embedded web server to create a network, intelligent and digital distributed control system. Sensor data such as temperature and current values would be measured, converted to digital values using the ARM processor's ADC, and sent to a PC via UART serial communication. A .NET application would then upload the sensor values to the internet. If sensor values exceed thresholds, the ARM processor can automatically control the industrial device. The system aims to provide real-time monitoring and control from anywhere via the internet in a reliable manner.
Intelligence monitoring system based on arm and information fusionsudhakar5472
This document proposes an intelligent monitoring system based on an ARM microcontroller and information fusion. It uses an ARM7 microcontroller to interface with sensors that measure temperature, humidity, and gas levels. The sensor values are transmitted to a PC via serial communication and uploaded to the internet, allowing for remote monitoring. This provides faster and more real-time monitoring compared to existing low-speed processor-based systems. The system aims to address monitoring needs for electrical equipment through an affordable design using ARM embedded technology and information fusion.
Online monitoring of wind induced vibration of transmission steel high towersudhakar5472
The document proposes a system to monitor wind-induced vibration in high transmission towers online using wireless sensors. It summarizes existing wire-based monitoring methods and their limitations. The proposed system uses an accelerometer interfaced with a PIC microcontroller to measure vibration. If vibration exceeds a threshold, the microcontroller transmits the status to a monitoring section using Zigbee wireless. Authorized personnel can then view the monitoring data in real-time over the internet to take immediate corrective action if needed.
Embedded web server application based automation and monitoring systemsudhakar5472
This document proposes an embedded web server application for home automation and monitoring. The existing PC-based system requires servers to be on at all times, increasing costs. The proposed system overcomes this by using a PIC microcontroller connected to sensors via an Ethernet converter to directly transmit home parameters like temperature, humidity, and motion to the main server. This allows remote home monitoring through the internet without high power or hardware costs.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
A passive radio frequency p h-sensing tag for wireless food-quality monitoringsudhakar5472
The document presents a wireless pH-sensing tag for monitoring food quality. The tag includes a flexible pH sensor integrated with wireless communication circuitry, allowing for convenient and long-term in situ monitoring of food quality from production to retail without batteries. The proposed system connects a pH sensor to a microcontroller that receives sensor data and sends it via Zigbee to a PC for display. It would allow food producers and retailers to remotely monitor produce pH levels to ensure safety and reduce waste.
A wearable inertial sensor node for body motion analysissudhakar5472
The document describes the design and implementation of a wearable wireless inertial sensor node for body motion analysis. A triaxial accelerometer, biaxial gyroscope, and yaw rate gyroscope are integrated onto a printed circuit board to sense accelerations and angular rates. The small, printed inverted-F antenna allows for comfortable wearing while maintaining reasonable performance. The sensor node can be adapted to applications with different power requirements through periodic and event-driven wakeup functions in the software. The sensor data is wirelessly transmitted to a PC for analysis and monitoring of body motions and behaviors.
The design and implementation of power earth line monitoring systemsudhakar5472
The document describes a proposed power earth-line monitoring system that uses GSM communications to collect, record, and display physical parameters of earth lines during power line construction and maintenance. The existing manual earth line inspection system is time-consuming and difficult for fault identification. The proposed system addresses this by using an intelligent earth monitor connected to a GSM modem to transmit earth line state data via short messages. When installed, it can detect if the earth line is connected or disconnected and display this information at a remote monitoring center. The system has hardware components like a microcontroller, sensors, and GSM modem and requires software like Embedded C and a VB program for monitoring.
A remote online monitoring system for damsudhakar5472
This document proposes a remote online monitoring system for dams that uses sensors to monitor parameters like temperature, displacement, load, and stress in real-time. The sensor data is sent via GPRS to a computer server where it is stored and analyzed. This allows dam conditions to be monitored centrally without needing manual on-site measurements. The proposed system interfaces sensors with a PIC microcontroller that sends abnormal sensor readings via GPRS. Authorized users can then access the sensor data remotely for monitoring dam safety.
This document proposes a remote online monitoring system for dams that uses sensors to monitor parameters like temperature, displacement, load, and stress in real-time. The sensor data is sent via GPRS to a computer server where it is stored and analyzed. This allows dam conditions to be monitored centrally without needing manual on-site measurements. The proposed system interfaces sensors with a PIC microcontroller that sends abnormal sensor readings via GPRS. Authorized users can then access the sensor data remotely for monitoring dam safety.
Ima an integrated monitoring architecture with sensor networkssudhakar5472
The document proposes an integrated monitoring architecture using sensor networks. It aims to address the difficulties of integrating heterogeneous monitoring systems that are commonly developed separately. The proposed system creates a common database to store parameters measured from two environments - living and industrial - using wireless sensor networks. Temperature, humidity, voltage, and current are measured by sensors and transmitted via Zigbee and PIC microcontrollers to the database section. Users can access the stored data by selecting an environment and providing login credentials.
Development of on line monitoring system of substation power equipment based ...sudhakar5472
The document proposes developing an online monitoring system for substation power equipment based on the IEEE1588 standard. This system would use a PIC microcontroller to sense temperature, current and voltage from sensors, store the data in EEPROM, and upload it to the internet via Ethernet. By implementing precise time synchronization between master and slave clocks over Ethernet using IEEE1588, the system allows real-time remote monitoring of substation status from anywhere.
Next generation system for real time monitoring of rainfall, soil moisture, a...sudhakar5472
The document proposes a next generation system for real-time monitoring of rainfall, soil moisture, and soil temperature. It describes an existing wired system and proposes a new wireless system using GSM/GPRS technology. The proposed system would use sensors to measure rainfall, soil temperature, and moisture connected to a PIC microcontroller. The microcontroller would send the sensor data via GSM/GPRS to the internet where users could access it through a web browser.
Research on water saving irrigation automatic control system based on interne...sudhakar5472
This document discusses the design of a wireless sensor network and internet-based automatic irrigation control system to improve irrigation water use efficiency. The system uses ZigBee technology to allow wireless communication between sensor nodes on farms and a central server node. Sensors measure soil moisture, temperature, and humidity. If levels go out of normal ranges, the microcontroller automatically controls irrigation valves to supply or stop water. Users can monitor sensor data and control irrigation remotely using mobile phones or a web interface. The system aims to intelligently automate irrigation and reduce water and labor costs compared to existing wired systems.
Design of on line interactive data acquisition and control system for embedde...sudhakar5472
This document discusses the design of an online interactive data acquisition and control system for embedded real-time applications. It proposes using an ARM-based embedded web server to create a network, intelligent and digital distributed control system. Sensor data such as temperature and current values would be measured, converted to digital values using the ARM processor's ADC, and sent to a PC via UART serial communication. A .NET application would then upload the sensor values to the internet. If sensor values exceed thresholds, the ARM processor can automatically control the industrial device. The system aims to provide real-time monitoring and control from anywhere via the internet in a reliable manner.
Intelligence monitoring system based on arm and information fusionsudhakar5472
This document proposes an intelligent monitoring system based on an ARM microcontroller and information fusion. It uses an ARM7 microcontroller to interface with sensors that measure temperature, humidity, and gas levels. The sensor values are transmitted to a PC via serial communication and uploaded to the internet, allowing for remote monitoring. This provides faster and more real-time monitoring compared to existing low-speed processor-based systems. The system aims to address monitoring needs for electrical equipment through an affordable design using ARM embedded technology and information fusion.
Online monitoring of wind induced vibration of transmission steel high towersudhakar5472
The document proposes a system to monitor wind-induced vibration in high transmission towers online using wireless sensors. It summarizes existing wire-based monitoring methods and their limitations. The proposed system uses an accelerometer interfaced with a PIC microcontroller to measure vibration. If vibration exceeds a threshold, the microcontroller transmits the status to a monitoring section using Zigbee wireless. Authorized personnel can then view the monitoring data in real-time over the internet to take immediate corrective action if needed.
Embedded web server application based automation and monitoring systemsudhakar5472
This document proposes an embedded web server application for home automation and monitoring. The existing PC-based system requires servers to be on at all times, increasing costs. The proposed system overcomes this by using a PIC microcontroller connected to sensors via an Ethernet converter to directly transmit home parameters like temperature, humidity, and motion to the main server. This allows remote home monitoring through the internet without high power or hardware costs.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...Diana Rendina
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
How to Manage Your Lost Opportunities in Odoo 17 CRMCeline George
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Leveraging Generative AI to Drive Nonprofit Innovation
The intelligent blood collecting apparatus based on internetworking
1. THE INTELLIGENT BLOOD COLLECTING APPARATUS
BASED ON INTERNETWORKING
The paper chiefly introduces the apparatus of intelligent blood-collect based on
internetworking. The apparatus uses fingerprint identifying technology to distinguish the identity
of the operator and radiofrequency identification technology to input the information of the
donator. The apparatus can measure collected blood. So it accomplishes automation of collecting
blood and increases reliability of collecting blood. The interface of internetworking is embedded
in the intelligent blood collecting apparatus. And the intelligent management of blood collecting
comes true.
Proposed system:
Blood collecting which is the important segment of blood donation directly relates to the
health of the donator and the persons using the blood. The blood-collecting apparatus is strictly
desired especially. The apparatus introduced in this paper combines the technology of computer,
measurement, electronic and communication. Main properties of the apparatus are: (1) Blood
collecting is completed automatically and its collecting process and result are showed in liquid
crystal display. (2) The RFID reader is used to input the relative information of the blood
donator. (3) Use fingerprint input to identify the operator for collecting blood the apparatus can
measure collected blood. (4) Monitor the pulse of the donator to avoid accidents using BP
sensor.
In this project, the fingerprint scanner is used to identify the operator for collecting blood
and RFID reader is used to identify the donator information to get from RFID tag and given
information to ARM processor. The BP sensor is used to check blood pressure of donator. If BP
is normal only blood will be collected from donator, blood collecting key is on to collect the
blood , the blood is collected from patient as well as monitoring donator BP condition and level
of blood collecting apparatus using weight sensor. ARM processor stops Collection blood
2. immediately either any abnormalities in BP value or collection apparatus is filled using sensed
by weight sensor.
Block Diagram:
Power supply
ARM 7
Key
PC with .NET
LPC2129
Level
converter
BP Sensor
ARM 7
ARM 7
LPC2129
ARM 7
LPC2129
Weight Sensor
With
ARM 7
mechanism
LPC2129
Level
converter
ARM 7
LPC2129
ARM 7
RFID Reader
LPC2129
ARM 7
LPC2129
ARM 7
LPC2129
Driver
LPC2129
Circuit
Finger print scanner
ARM 7
Motor
LPC2129
LCD
ARM 7
LPC2129
ARM 7
LPC2129
3. Hardware Requirements:
ARM processor
RFID reader and Tag
Finger print scanner
BP sensor
LCD
Weight sensor with apparatus
DC motor
MAX 232.
PC
Software Requirements:
Embedded C
Keil Compiler
VB .NET