This document describes a tensile strength tester that can perform various tests with high accuracy, including tensile strength testing of materials like plastic films, paper, and medical products. It has capacities from 1 kg to 250 kg, test speeds from 10 to 1000 mm/min, and test lengths from 300 mm to 1000 mm. The machine is available in computerized and non-computerized models with optional modules and fixtures for different testing functions.

1. Tensile Strength .
Confirms to TAPPI / ASTM / ISO / IEC / IS .
Tensile Strength Tester
This is a Single-Column generic tensile testing machine which can be designed to perform any or all of the
following tests with high accuracy :
1) 180° / 90° Peel Strength Test of Adhesive Tapes / Labels.
2) Inter-Layer Bond Strength Test (T-Peel Test) of Laminates.
3) Seal Strength Test of Laminates.
4) Tensile Strength Test of Plastic Film / Laminates.
5) Tensile Strength Test of P.P. Strapping.
6) Tensile Strength Test of Surgical Sutures and Medical Products.
7) Tensile Index Test / Breaking Load / Breaking Length of Paper.
8) Hologram Release Test for Security Holograms (Tamper Evident).
9) Silicon Release Test for Silicon Coated Paper.
Capacities Available :
1 Kg, 5 Kg, 10Kg, 20Kg, 50Kg, 100Kg, 250Kg, etc
Test Speeds :
Fixed Speed Models : 25 / 100 / 254 / 300 mm/min
Variable Speed Models : 10 – 500 / 1-1000 mm/min
Test Lengths Available :
Standard : 300 mm
Long : 500 mm
Very Long : 750 mm
Extra Long : 1000 mm
Special : Any size is possible.
This machine is available in Computerised / Non-Computerised models with many optional modules,
adopters, fixtures, etc for a wide variety of testing functions.