The document is a technical data sheet describing the Tremor3 reticle. It contains specifications for the reticle including milling thickness, dimensions of markings, and illumination pattern. Key features are described such as rapid range bars, very fine reticle markings down to 0.1 mils, wind dots, and a central targeting grid calibrated in mils for holdover points out to extreme long ranges. The reticle is designed for speed shooting out to 600 meters and perfectly calibrated wind and elevation holds.

1. Technical Data Sheet
Tremor3™ Reticle
LOW MAGNIFICATION VIEW
Page 1 of 5
10
10
12
14
16
1
2
3
4
5
6
7
8
9
10 1 2 3 4 5 6 7 8 9 10
12
14
16
2
4
6
5 10
8
5
10
10
2 4 6 8
10 2
4
6
8
2
4
6
8
18
20
22
24
26
28
30
32
34
36
38
18
20
22
24
26
28
30
32
34
36
38
6
7
8
9
10 6 7 8 9 10
6
7
8
9
10 6 7 8 9 10
20 30 40 50 60 70
20
30
40
50
60
70
40 40
20 30 40 50 60
20
30
40
50
60
Horus Vision, 336 Hazen Lane, Orofino, ID 83544 • 866-568-2926 • www.HorusVision.com
Copyright 2019 Horus Vision. All rights reserved. Written consent of Horus Vision required to copy or use any of the material in this document.

2. Technical Data Sheet
Tremor3™ Reticle Page 2 of 5
HIGH MAGNIFICATION VIEW
10
10
12
14
16
1
2
3
4
5
6
7
8
9
10 1 2 3 4 5 6 7 8 9 10
12
14
16
2
4
6
5 10 15
8
5
10
15
10
2 4 6 8
10 2
4
6
8
20
20
2
4
6
8
Horus Vision, 336 Hazen Lane, Orofino, ID 83544 • 866-568-2926 • www.HorusVision.com
Copyright 2019 Horus Vision. All rights reserved. Written consent of Horus Vision required to copy or use any of the material in this document.

3. Technical Data Sheet
Tremor3™ Reticle Page 3 of 5
SPECIFICATIONS
10
10
12
14
16
1
2
3
4
5
6
7
8
9
10 1 2 3 4 5 6 7 8 9 10
12
14
16
2
4
6
5 10 15
8
5
10
15
10
2 4 6 8
10 2
4
6
8
20
20
2
4
6
8
.025 MIL
THK.
.015 MIL
THK.
.015 MIL THK.
.025 MIL THK.
.015 MIL THK.
.05 MIL
THK.
.05 MIL THK.
.05 MIL THK.
1.25
MIL
1.25
MIL
1.25
MIL
1.25
MIL
1.25
MIL
.3 MIL
TYP.
1 MIL
.9 MIL
.8 MIL
.7 MIL
.6 MIL
.5 MIL
.3 MIL
1 MIL
1 MIL
1 MIL
.5
MIL
.22
MIL
1 MIL
.3
MIL
.1
MIL
.11 MIL
.25
MIL
.11
MIL
1
MIL
.11 MIL
LONG
CROSS
.22
MIL
Horus Vision, 336 Hazen Lane, Orofino, ID 83544 • 866-568-2926 • www.HorusVision.com
Copyright 2019 Horus Vision. All rights reserved. Written consent of Horus Vision required to copy or use any of the material in this document.

4. Technical Data Sheet
Tremor3™ Reticle Page 4 of 5
ILLUMINATION PATTERN
10
10
12
14
16
1
2
3
4
5
6
7
8
9
10 1 2 3 4 5 6 7 8 9 10
12
14
16
2
4
6
5 10
8
5
10
10
2 4 6 8
10 2
4
6
8
2
4
6
8
18
20
22
18
20
22
6
7
8
9
10 6 7 8 9 10
20 30
20
30
20 30
20
30
Horus Vision, 336 Hazen Lane, Orofino, ID 83544 • 866-568-2926 • www.HorusVision.com
Copyright 2019 Horus Vision. All rights reserved. Written consent of Horus Vision required to copy or use any of the material in this document.

5. Technical Data Sheet
Tremor3™ Reticle Page 5 of 5
KEY FEATURES
Patented Horus Rapid Range Bars for quick range estimation for common-sized targets.
Very fine reticle to aid in precise aiming at high power and distant ranges. Refined, patented “chevron” mil markers
subtend to 0.1 mils. Versatile marker groupings for measuring targets occur throughout the reticle.
For speed shooting out to 600 meters using our patented speed shooting features on the Horus reticle.
Patented Wind Dots allow for fast and accurate wind holds.
Holdover crosses to extend wind and elevation hold points beyond the Horus™ Grid while maintaining a clear
uncluttered view.
Central dot at crosshair intersection for refined aiming point and un-obscured view.
Open field of view above center reticle for clear observation and spotting.
Moving target holds located on the main horizontal crosshair.
The Tremor3 reticle offers illumination for twilight and lowlight conditions.
The Horus Grid lets you visually place the target on the appropriate horizontal and vertical grid lines to correct for
elevation and windage visually without turning knobs or counting clicks.
Secondary horizontal lines allow precise elevation holds. The standard spacing between the secondary horizontal lines
is exactly 1 mil.
To compensate for wind, drift, speed of target, etc.: each secondary horizontal stadia line is calibrated with
“large hash marks” spaced exactly 1 mil apart; between each of the large hash marks, there are smaller evenly spaced
hash marks that are exactly 0.2 mils apart.
The Horus Grid allows you to quickly and accuratley make a Second Shot Correction if your first shot misses.
KEY FACTS .
Ability to perfectly calibrate wind dots to ballistics of your choice.
Speed Shooting range: from 0 to 600 meters.
Horus Grid range: from 0 to extreme long range.
Excellent milling capability with 0.1 mil resolution milling chevrons, allowing extremely fine mil estimation.
Reticle hold points subtending to 0.2 mil.
Central targeting grid calibrated in USMC mils (6283 mils/circle) (1 mil = 3.60 inches at 100 yards) (10cm at 100 meters).
Precise calibration of measurements to within less than 0.5%.




















Horus Vision, 336 Hazen Lane, Orofino, ID 83544 • 866-568-2926 • www.HorusVision.com
Copyright 2019 Horus Vision. All rights reserved. Written consent of Horus Vision required to copy or use any of the material in this document.