Team bender
•Download as PPT, PDF•
0 likes•583 views
1. The document describes the design of a test stand for conducting strain tests on various materials up to 150 lbs of force. 2. It evaluates different design concepts and selects a hybrid design with an aluminum frame, pneumatic cylinder for force application, dial gauge for measurement, and four jaw chuck for sample holding. 3. Key calculations are shown to determine the minimum bore size of 2 inches for the pneumatic cylinder to apply up to 150 lbs of force given an input pressure of 60 psi.
Report
Share
Report
Share
![[object Object],[object Object],[object Object]](https://image.slidesharecdn.com/teambender-100910015941-phpapp01/85/Team-bender-1-320.jpg)
![[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
The Changes in ISO 6892-1:2016 Metallic Materials Tensile Testing Standard
Today, as the current standard tensile test for metallic materials ISO 6892-1 standard are used. The English version of the standard in 2009 and the Turkish version in 2011 were published. The English version was renewed in 2016. In this study, we aimed to summarize the major changes made in this standard. In this way, it is aimed to be transmitted detailed and accurate information for related person.
Experimental and numerical stress analysis of a rectangular wing structure
Structures of an aircraft can be categorised as primary structural components and secondary structure components. Primary structure components are the components which lead to failure of the aircraft if such component is failed during the flight cycle. Secondary components are load sharing components in an aircraft but will not pave the way to catastrophic failure.
Designing aircraft structures should follow several strategies to assure safety. For that, there are three main methods used in designing and maintenance procedures. First one is the safe flight, which an aircraft component has a lifetime. That component is not used beyond that limit and should replace though it is not failed. The fail-safe method is another one that redundant systems or components are there to ensure there is another way to carry the load or do necessary control. The final one is the damage tolerance which measures the current damages are within acceptable limit and carry out the main functions until the next main maintenance process.
To determine the safety of a structure component load distribution, stress and strain variation, deflection can be used as parameters to make sure that component can withstand maximum allowable load with safety factor. There are several techniques used to get accurate results as numerical methods, Finite Element Method (FEM) and experimental methods. In the design process, those three steps are followed in an orderly manner to ensure the safety of an aircraft.
Transient three dimensional cfd modelling of ceilng fan
Ceiling fans are used to get thermal comfort, especially in tropical countries. With the increment of the usage of air conditioners, the emission of CO2 is increased. But ceiling fans are a limited solution, that saves much energy compared to air conditioners. Ceiling fans generate a non-uniform velocity profile, so that, there is a non-uniform thermal environment. That non-uniform environment does not imply lower thermal comfort, that will give enough thermal comfort with low energy cost by air velocity. Hence, there will be difficulties of analysing with simple modelling techniques in that environment. So, to predict the performance of the ceiling fan required more accurate models.
The accurate model of a ceiling fan will generate complex geometry that makes difficulties for the simulation process and requires higher computational power. Because of that, there are several methods used to predict the performance of the ceiling fan using mathematical techniques but that will give an estimated value of properties in the surrounding.
How to Calibrate a Pressure Gauge with a Pressure Comparator or Calibrator We...
Fluke and Transcat Present How to Calibrate a Pressure Gauge using a Pressure Comparator or Pressure Calibrator Webinar
Experimental and numerical stress analysis of a rectangular wing structure
Structures of an aircraft can be categorised as primary structural components and secondary structure components. Primary structure components are the components which lead to failure of the aircraft if such component is failed during the flight cycle. Secondary components are load sharing components in an aircraft but will not pave the way to catastrophic failure.
Designing aircraft structures should follow several strategies to assure safety. For that, there are three main methods used in designing and maintenance procedures. First one is the safe flight, which an aircraft component has a lifetime. That component is not used beyond that limit and should replace though it is not failed. The fail-safe method is another one that redundant systems or components are there to ensure there is another way to carry the load or do necessary control. The final one is the damage tolerance which measures the current damages are within acceptable limit and carry out the main functions until the next main maintenance process.
To determine the safety of a structure component load distribution, stress and strain variation, deflection can be used as parameters to make sure that component can withstand maximum allowable load with safety factor. There are several techniques used to get accurate results as numerical methods, Finite Element Method (FEM) and experimental methods. In the design process, those three steps are followed in an orderly manner to ensure the safety of an aircraft.
Catalogo proceq hub dirtajayasurvey 087876262648
This document provides information on Proceq, a manufacturer of non-destructive testing instruments for concrete, metal, and paper industries. It discusses Proceq's history and product range, including concrete test hammers, rebar locators, corrosion analyzers, and more. Details are provided on specific products like the SilverSchmidt concrete test hammer and Original Schmidt hammers. Contact information is listed for Proceq subsidiaries in Europe, Americas, and Asia-Pacific regions.
Stress analysis method
Stress Analysis Method , special points to be checked and understood by Piping engineers, Civil and Structural Engineers and especially by Stress Analysis Engineers.
Staf staf sg-en_main
This document provides information on the STAF and STAF-SG balancing valves including:
- They are flanged cast iron or ductile iron valves used for balancing, pre-setting, measuring, and shutting off flow in heating and cooling systems.
- Key features include an accurate handwheel with digital readout and self-sealing measuring points.
- They are available in sizes from DN 20-400 and pressure classes PN 16 and PN 25 with maximum working temperatures up to 120°C.
- Detailed specifications, diagrams, and technical descriptions are given to size the valves for different flow rates and pressure drops.
Recommended
The Changes in ISO 6892-1:2016 Metallic Materials Tensile Testing Standard
Today, as the current standard tensile test for metallic materials ISO 6892-1 standard are used. The English version of the standard in 2009 and the Turkish version in 2011 were published. The English version was renewed in 2016. In this study, we aimed to summarize the major changes made in this standard. In this way, it is aimed to be transmitted detailed and accurate information for related person.
Experimental and numerical stress analysis of a rectangular wing structure
Structures of an aircraft can be categorised as primary structural components and secondary structure components. Primary structure components are the components which lead to failure of the aircraft if such component is failed during the flight cycle. Secondary components are load sharing components in an aircraft but will not pave the way to catastrophic failure.
Designing aircraft structures should follow several strategies to assure safety. For that, there are three main methods used in designing and maintenance procedures. First one is the safe flight, which an aircraft component has a lifetime. That component is not used beyond that limit and should replace though it is not failed. The fail-safe method is another one that redundant systems or components are there to ensure there is another way to carry the load or do necessary control. The final one is the damage tolerance which measures the current damages are within acceptable limit and carry out the main functions until the next main maintenance process.
To determine the safety of a structure component load distribution, stress and strain variation, deflection can be used as parameters to make sure that component can withstand maximum allowable load with safety factor. There are several techniques used to get accurate results as numerical methods, Finite Element Method (FEM) and experimental methods. In the design process, those three steps are followed in an orderly manner to ensure the safety of an aircraft.
Transient three dimensional cfd modelling of ceilng fan
Ceiling fans are used to get thermal comfort, especially in tropical countries. With the increment of the usage of air conditioners, the emission of CO2 is increased. But ceiling fans are a limited solution, that saves much energy compared to air conditioners. Ceiling fans generate a non-uniform velocity profile, so that, there is a non-uniform thermal environment. That non-uniform environment does not imply lower thermal comfort, that will give enough thermal comfort with low energy cost by air velocity. Hence, there will be difficulties of analysing with simple modelling techniques in that environment. So, to predict the performance of the ceiling fan required more accurate models.
The accurate model of a ceiling fan will generate complex geometry that makes difficulties for the simulation process and requires higher computational power. Because of that, there are several methods used to predict the performance of the ceiling fan using mathematical techniques but that will give an estimated value of properties in the surrounding.
How to Calibrate a Pressure Gauge with a Pressure Comparator or Calibrator We...
Fluke and Transcat Present How to Calibrate a Pressure Gauge using a Pressure Comparator or Pressure Calibrator Webinar
Experimental and numerical stress analysis of a rectangular wing structure
Structures of an aircraft can be categorised as primary structural components and secondary structure components. Primary structure components are the components which lead to failure of the aircraft if such component is failed during the flight cycle. Secondary components are load sharing components in an aircraft but will not pave the way to catastrophic failure.
Designing aircraft structures should follow several strategies to assure safety. For that, there are three main methods used in designing and maintenance procedures. First one is the safe flight, which an aircraft component has a lifetime. That component is not used beyond that limit and should replace though it is not failed. The fail-safe method is another one that redundant systems or components are there to ensure there is another way to carry the load or do necessary control. The final one is the damage tolerance which measures the current damages are within acceptable limit and carry out the main functions until the next main maintenance process.
To determine the safety of a structure component load distribution, stress and strain variation, deflection can be used as parameters to make sure that component can withstand maximum allowable load with safety factor. There are several techniques used to get accurate results as numerical methods, Finite Element Method (FEM) and experimental methods. In the design process, those three steps are followed in an orderly manner to ensure the safety of an aircraft.
Catalogo proceq hub dirtajayasurvey 087876262648
This document provides information on Proceq, a manufacturer of non-destructive testing instruments for concrete, metal, and paper industries. It discusses Proceq's history and product range, including concrete test hammers, rebar locators, corrosion analyzers, and more. Details are provided on specific products like the SilverSchmidt concrete test hammer and Original Schmidt hammers. Contact information is listed for Proceq subsidiaries in Europe, Americas, and Asia-Pacific regions.
Stress analysis method
Stress Analysis Method , special points to be checked and understood by Piping engineers, Civil and Structural Engineers and especially by Stress Analysis Engineers.
Staf staf sg-en_main
This document provides information on the STAF and STAF-SG balancing valves including:
- They are flanged cast iron or ductile iron valves used for balancing, pre-setting, measuring, and shutting off flow in heating and cooling systems.
- Key features include an accurate handwheel with digital readout and self-sealing measuring points.
- They are available in sizes from DN 20-400 and pressure classes PN 16 and PN 25 with maximum working temperatures up to 120°C.
- Detailed specifications, diagrams, and technical descriptions are given to size the valves for different flow rates and pressure drops.
Case Study: Weighing System
This document summarizes the requirements, design considerations, and recommendations for an industrial weighing system for continuously measuring the weight of material in a silo. Key factors discussed include using 4 load cells to support the receiving element, selecting load cells with high accuracy, compensating for frame deflection and temperature effects, protecting against wind, rain, snow, and ensuring proper installation, calibration and maintenance.
Constant Spring Supports Webinar
This document provides an overview of a webinar presented by Piping Technology & Products, Inc. and its subsidiaries on constant spring supports. It discusses the characteristics and design of constant spring supports, including various types and configurations. It also covers related topics like installation, testing, maintenance, and value-added engineering services.
Constant Springs Webinar - January
1) The document provides information about a webinar on constant spring supports hosted by Piping Technology & Products, including an overview of constant spring supports, their design process, features, testing procedures, maintenance and replacement criteria.
2) Details are given on the different types of constant spring supports as well as information sheets and examples of spring sizing.
3) The webinar covers value-added services offered by Piping Technology & Products such as engineering, field services, product testing, inventory and technical literature.
General Pulse Structural Monitoring
1. Pulse provides structural monitoring systems to measure motion and strain of offshore structures to improve understanding and operational efficiency.
2. Their services include monitoring system design, instrumentation, installation, data processing and management to monitor structures like risers, pipelines, mooring cables, and more.
3. Case studies on monitoring projects for structures like Tahiti's steel catenary risers are presented, highlighting the customized engineering solutions and instrumentation used.
ME 273 FInal Slides
This document discusses optimizing the design of 3D printed ABS columns through variation of hexagonal infill percentage and orientation to minimize material usage. Finite element analysis was conducted on columns with different infill percentages and angles. Experimental validation and sensitivity analysis were also planned. The recommended column design was found to be 11% hexagonal infill oriented at 0 degrees, which had a maximum stress of 15.76 MPa while minimizing material usage at 27.88 mg.
Project 10-004 Pressure system JK-01
This document summarizes the finite element analysis of a pressure system (JK-01). It includes the 3D model geometry containing three parts, defined connections between parts, meshing, and static structural analysis applying pressures and supports. The analysis calculated stresses, deformations and resulted in maximum stresses of 12.185 MPa and 1.3683 mm total deformation occurring in the solid parts. Material properties of structural steel and polyethylene were also defined.
Sensus WP-Dynamic Flow Meter - Spec Sheet
The document summarizes specifications for a flow sensor for measuring hot water up to 130°C. It has a patented hydrodynamically balanced rotor and symmetrical calibration adjustment. It provides accurate flow measurement from minimum to maximum rates, with an accuracy of ±5% at minimum flow up to ±2% at continuous flow. Installation requires unrestricted straight pipe before and after the sensor. Dimensions, weights, materials, and ordering information is provided for sensors ranging from DN40 to DN300 in size.
ENHANCEMENT OF TENSION LAP SPLICE IN HPC USING DIFFERENT TECHNIQUES.pptx
Different techniques for splicing steel reinforcement in high performance concrete instead of using mechanical splices or welding of steel bars. The presentation focused on RC specimens under axial tension having spliced reinforcing steel bars and tested in laboratory
KEMET EMC Filters
This document provides information about KEMET EMC filters and events. It announces KEMET webinars and events in Europe in November 2017. It also provides an overview of EMC filtering needs, types of EMC filters, EMC testing procedures, factors to consider for EMC filter design like current, voltage, insertion loss, and applications of EMC filters in areas like renewable energy, medical equipment, and transportation.
Final Presentation
Ash Abel completed a summer internship with Clemson University's Mechanical Engineering department. Their main project involved vibration and acoustic testing of a 7.5MW test bench that emitted uncomfortable noise levels. Through research, testing, and analysis, Ash identified possible causes such as loose connections and resonance. They designed tests using accelerometers and microphones to analyze vibration and acoustic data. Potential solutions like shortening the support beam or changing its cross-section were modeled and tested. Analysis showed modifying connections and the beam's design could effectively reduce noise levels. Ash also assisted engineers and created support materials during their internship.
Analysis of Lifting Machine
This project report summarizes the design of a transporter machine used to lift heavy machinery between floors. The machine uses pneumatic pistons and chain-driven pulleys. It is divided into 3 subsystems: 1) Pneumatics & Pulley, 2) Mainframe, and 3) Carriage. Each subsystem is analyzed in detail to check for failure against criteria like rupture, buckling, yielding, etc. The analyses ensure each component can withstand a critical design load of 3 tonnes, which is the desired lifting capacity of the machine. The report also provides design recommendations and addresses potential design shortcomings.
BMC B1-falling-dart-impact-tester
Labthink Instruments Co., Ltd. produces a falling dart impact tester that can automatically test specimens using one of two methods (A or B) and determine impact resistance. The tester uses electromagnetic suspension and automatic release of the falling dart to reduce errors from manual operation. It has pneumatic clamping, dual start modes, and an observation light for user convenience. Test results are displayed and data can be exported via the included printer or Lab Data Sharing System software. The falling dart impact tester conforms to various international standards and can test properties like impact resistance of films, paper, aluminum, and composites.
Bmc b1-Impact Resistance Tester
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
BMC-B1-Falling-Dart-Impact-Tester
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
NON LINEAR ANALYSIS OF STRUCTURAL STEEL I BEAM
ANALYSIS ON NON LINEAR BEHAVIOR OF STRUCTURAL STEEL AND PLOTTING OF STRESS STRAIN CURVE WITH RESIDUAL STRAIN
Application of Design of Experiments (DOE) using Dr.Taguchi -Orthogonal Array...
Application of Design of Experiments (DOE) using Dr.Taguchi -Orthogonal Array...Karthikeyan Kannappan
The Taguchi method involves reducing the variation in a process through robust design of experiments. The experimental design proposed by Taguchi involves using orthogonal arrays to organize the parameters affecting the process and the levels at which they should be varies. Instead of having to test all possible combinations like the factorial design, the Taguchi method tests pairs of combinations. The Taguchi arrays can be derived or looked up. Small arrays can be drawn out manually; large arrays can be derived from deterministic algorithms. Generally, arrays can be found online. The arrays are selected by the number of parameters (variables) and the number of levels (states).
In this paper, the specific steps involved in the application of the Taguchi method will be described with example. Experimental evaluation of strain in concrete elements
The document describes experimental evaluation of strain in concrete elements. It discusses different methods of strain measurement including mechanical and electrical techniques. The mechanical method uses a mechanical strain gauge to measure displacement amplified through a linkage. The electrical method uses strain gauges connected to a Wheatstone bridge circuit to measure resistance changes due to deformation. An experiment was conducted to measure strain in concrete cubes and beams using both methods. The results show the recorded strains at different stress levels applied to the specimens.
Falling Dart Impact Tester
Windows menu interface and touch screen are convenient for the user to set test parameters quickly
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
Original N P-CHANNEL ENHANCEMENT Mosfet AP4506GEH 4506GEH 4506 TO-252 New Adv...
This document summarizes the specifications and characteristics of an Advanced Power N-channel and P-channel enhancement mode MOSFET. The MOSFET has a maximum drain-source voltage of 30V for the N-channel and -30V for the P-channel. It has low on-resistances of 24mΩ and 36mΩ respectively. Tables provide the thermal data and electrical characteristics for each channel including threshold voltages, leakage currents, capacitances, and switching times. Graphs show characteristics such as output curves, gate charge waveforms, and safe operating areas.
Production skill,
The document provides information on various aspects of spot welding including:
- Definitions of key terms like spot weld, welding control, and the importance of force between electrodes.
- Explanations of spot welding principles involving resistance heating when current passes through interfaces of stacked metals joined by electrodes applying pressure.
- Advantages of spot welding as the quickest and most economical method for joining metals requiring no filler medium.
- Details on TPM system pillars like autonomous maintenance, planned maintenance, quality maintenance, and focused improvement to maintain production quality and equipment lifespan.
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(BU毕业证)波士顿大学毕业证如何办理
BU毕业证学位证【微信95270640】办理BU毕业证【Q微信95270640】波士顿大学毕业证书原版↑制作波士顿大学学历认证文凭办理波士顿大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办波士顿大学波士顿大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.波士顿大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供波士顿大学波士顿大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思念父亲了老想着进父亲的城看看每次从城里洋里洋气地回来小伙伴们总争论着各自到过的城比试比试谁父亲的城最大最美他们大谈城里的新鲜事大谈父亲携他们逛城的快乐事在孩子们幼小的心中地
More Related Content
Similar to Team bender
Case Study: Weighing System
This document summarizes the requirements, design considerations, and recommendations for an industrial weighing system for continuously measuring the weight of material in a silo. Key factors discussed include using 4 load cells to support the receiving element, selecting load cells with high accuracy, compensating for frame deflection and temperature effects, protecting against wind, rain, snow, and ensuring proper installation, calibration and maintenance.
Constant Spring Supports Webinar
This document provides an overview of a webinar presented by Piping Technology & Products, Inc. and its subsidiaries on constant spring supports. It discusses the characteristics and design of constant spring supports, including various types and configurations. It also covers related topics like installation, testing, maintenance, and value-added engineering services.
Constant Springs Webinar - January
1) The document provides information about a webinar on constant spring supports hosted by Piping Technology & Products, including an overview of constant spring supports, their design process, features, testing procedures, maintenance and replacement criteria.
2) Details are given on the different types of constant spring supports as well as information sheets and examples of spring sizing.
3) The webinar covers value-added services offered by Piping Technology & Products such as engineering, field services, product testing, inventory and technical literature.
General Pulse Structural Monitoring
1. Pulse provides structural monitoring systems to measure motion and strain of offshore structures to improve understanding and operational efficiency.
2. Their services include monitoring system design, instrumentation, installation, data processing and management to monitor structures like risers, pipelines, mooring cables, and more.
3. Case studies on monitoring projects for structures like Tahiti's steel catenary risers are presented, highlighting the customized engineering solutions and instrumentation used.
ME 273 FInal Slides
This document discusses optimizing the design of 3D printed ABS columns through variation of hexagonal infill percentage and orientation to minimize material usage. Finite element analysis was conducted on columns with different infill percentages and angles. Experimental validation and sensitivity analysis were also planned. The recommended column design was found to be 11% hexagonal infill oriented at 0 degrees, which had a maximum stress of 15.76 MPa while minimizing material usage at 27.88 mg.
Project 10-004 Pressure system JK-01
This document summarizes the finite element analysis of a pressure system (JK-01). It includes the 3D model geometry containing three parts, defined connections between parts, meshing, and static structural analysis applying pressures and supports. The analysis calculated stresses, deformations and resulted in maximum stresses of 12.185 MPa and 1.3683 mm total deformation occurring in the solid parts. Material properties of structural steel and polyethylene were also defined.
Sensus WP-Dynamic Flow Meter - Spec Sheet
The document summarizes specifications for a flow sensor for measuring hot water up to 130°C. It has a patented hydrodynamically balanced rotor and symmetrical calibration adjustment. It provides accurate flow measurement from minimum to maximum rates, with an accuracy of ±5% at minimum flow up to ±2% at continuous flow. Installation requires unrestricted straight pipe before and after the sensor. Dimensions, weights, materials, and ordering information is provided for sensors ranging from DN40 to DN300 in size.
ENHANCEMENT OF TENSION LAP SPLICE IN HPC USING DIFFERENT TECHNIQUES.pptx
Different techniques for splicing steel reinforcement in high performance concrete instead of using mechanical splices or welding of steel bars. The presentation focused on RC specimens under axial tension having spliced reinforcing steel bars and tested in laboratory
KEMET EMC Filters
This document provides information about KEMET EMC filters and events. It announces KEMET webinars and events in Europe in November 2017. It also provides an overview of EMC filtering needs, types of EMC filters, EMC testing procedures, factors to consider for EMC filter design like current, voltage, insertion loss, and applications of EMC filters in areas like renewable energy, medical equipment, and transportation.
Final Presentation
Ash Abel completed a summer internship with Clemson University's Mechanical Engineering department. Their main project involved vibration and acoustic testing of a 7.5MW test bench that emitted uncomfortable noise levels. Through research, testing, and analysis, Ash identified possible causes such as loose connections and resonance. They designed tests using accelerometers and microphones to analyze vibration and acoustic data. Potential solutions like shortening the support beam or changing its cross-section were modeled and tested. Analysis showed modifying connections and the beam's design could effectively reduce noise levels. Ash also assisted engineers and created support materials during their internship.
Analysis of Lifting Machine
This project report summarizes the design of a transporter machine used to lift heavy machinery between floors. The machine uses pneumatic pistons and chain-driven pulleys. It is divided into 3 subsystems: 1) Pneumatics & Pulley, 2) Mainframe, and 3) Carriage. Each subsystem is analyzed in detail to check for failure against criteria like rupture, buckling, yielding, etc. The analyses ensure each component can withstand a critical design load of 3 tonnes, which is the desired lifting capacity of the machine. The report also provides design recommendations and addresses potential design shortcomings.
BMC B1-falling-dart-impact-tester
Labthink Instruments Co., Ltd. produces a falling dart impact tester that can automatically test specimens using one of two methods (A or B) and determine impact resistance. The tester uses electromagnetic suspension and automatic release of the falling dart to reduce errors from manual operation. It has pneumatic clamping, dual start modes, and an observation light for user convenience. Test results are displayed and data can be exported via the included printer or Lab Data Sharing System software. The falling dart impact tester conforms to various international standards and can test properties like impact resistance of films, paper, aluminum, and composites.
Bmc b1-Impact Resistance Tester
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
BMC-B1-Falling-Dart-Impact-Tester
BMC-B1 is designed for determination of mechanical properties of packaging materials such as plastic films, laminates and paper by a free falling dart from a certain height. This instrument is designed according to ASTM D1709 with method A & B.
NON LINEAR ANALYSIS OF STRUCTURAL STEEL I BEAM
ANALYSIS ON NON LINEAR BEHAVIOR OF STRUCTURAL STEEL AND PLOTTING OF STRESS STRAIN CURVE WITH RESIDUAL STRAIN
Application of Design of Experiments (DOE) using Dr.Taguchi -Orthogonal Array...
Application of Design of Experiments (DOE) using Dr.Taguchi -Orthogonal Array...Karthikeyan Kannappan
The Taguchi method involves reducing the variation in a process through robust design of experiments. The experimental design proposed by Taguchi involves using orthogonal arrays to organize the parameters affecting the process and the levels at which they should be varies. Instead of having to test all possible combinations like the factorial design, the Taguchi method tests pairs of combinations. The Taguchi arrays can be derived or looked up. Small arrays can be drawn out manually; large arrays can be derived from deterministic algorithms. Generally, arrays can be found online. The arrays are selected by the number of parameters (variables) and the number of levels (states).
In this paper, the specific steps involved in the application of the Taguchi method will be described with example. Experimental evaluation of strain in concrete elements
The document describes experimental evaluation of strain in concrete elements. It discusses different methods of strain measurement including mechanical and electrical techniques. The mechanical method uses a mechanical strain gauge to measure displacement amplified through a linkage. The electrical method uses strain gauges connected to a Wheatstone bridge circuit to measure resistance changes due to deformation. An experiment was conducted to measure strain in concrete cubes and beams using both methods. The results show the recorded strains at different stress levels applied to the specimens.
Falling Dart Impact Tester
Windows menu interface and touch screen are convenient for the user to set test parameters quickly
2 test methods of A & B and automatic determination of testing status
Electromagnetic suspension and automatic release of the falling dart reduce the error caused by manual operation
Original N P-CHANNEL ENHANCEMENT Mosfet AP4506GEH 4506GEH 4506 TO-252 New Adv...
This document summarizes the specifications and characteristics of an Advanced Power N-channel and P-channel enhancement mode MOSFET. The MOSFET has a maximum drain-source voltage of 30V for the N-channel and -30V for the P-channel. It has low on-resistances of 24mΩ and 36mΩ respectively. Tables provide the thermal data and electrical characteristics for each channel including threshold voltages, leakage currents, capacitances, and switching times. Graphs show characteristics such as output curves, gate charge waveforms, and safe operating areas.
Production skill,
The document provides information on various aspects of spot welding including:
- Definitions of key terms like spot weld, welding control, and the importance of force between electrodes.
- Explanations of spot welding principles involving resistance heating when current passes through interfaces of stacked metals joined by electrodes applying pressure.
- Advantages of spot welding as the quickest and most economical method for joining metals requiring no filler medium.
- Details on TPM system pillars like autonomous maintenance, planned maintenance, quality maintenance, and focused improvement to maintain production quality and equipment lifespan.
Similar to Team bender (20)
ENHANCEMENT OF TENSION LAP SPLICE IN HPC USING DIFFERENT TECHNIQUES.pptx
ENHANCEMENT OF TENSION LAP SPLICE IN HPC USING DIFFERENT TECHNIQUES.pptx
Application of Design of Experiments (DOE) using Dr.Taguchi -Orthogonal Array...
Application of Design of Experiments (DOE) using Dr.Taguchi -Orthogonal Array...
Experimental evaluation of strain in concrete elements
Experimental evaluation of strain in concrete elements
Original N P-CHANNEL ENHANCEMENT Mosfet AP4506GEH 4506GEH 4506 TO-252 New Adv...
Original N P-CHANNEL ENHANCEMENT Mosfet AP4506GEH 4506GEH 4506 TO-252 New Adv...
Recently uploaded
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(BU毕业证)波士顿大学毕业证如何办理
BU毕业证学位证【微信95270640】办理BU毕业证【Q微信95270640】波士顿大学毕业证书原版↑制作波士顿大学学历认证文凭办理波士顿大学留信网认证,留学回国办理毕业证成绩单文凭学历认证【Q微信95270640】专业为海外学子办理毕业证成绩单、文凭制作，学历仿制，回国人员证明、做文凭，研究生、本科、硕士学历认证、留信认证、结业证、学位证书样本、美国教育部认证百分百真实存档可查】
【实体公司】办波士顿大学波士顿大学本科毕业证成绩单学历认证学位证文凭认证办留信网认证办留服认证办教育部认证（网上可查实体公司专业可靠）
— — — 留学归国服务中心 — — -
【主营项目】
一.波士顿大学毕业证成绩单使馆认证教育部认证成绩单等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证学位证成绩单办理流程：
1客户提供波士顿大学波士顿大学本科毕业证成绩单办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
专业服务请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理终生受用一步到位高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
招聘代理：本公司诚聘英国加拿大澳洲新西兰美国法国德国新加坡各地代理人员如果你有业余时间有兴趣就请联系我们咨询顾问：+微信:95270640知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思念父亲了老想着进父亲的城看看每次从城里洋里洋气地回来小伙伴们总争论着各自到过的城比试比试谁父亲的城最大最美他们大谈城里的新鲜事大谈父亲携他们逛城的快乐事在孩子们幼小的心中地
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
The Game Concept created as a Final Project piece for college. Creative Media year 2 student
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
ARENA - Young adults in the workplace (Knight Moves).pdf
Presentations of Bavo Raeymaekers (Project lead youth unemployment at the City of Antwerp), Suzan Martens (Service designer at Knight Moves) and Adriaan De Keersmaeker (Community manager at Talk to C)
during the 'Arena • Young adults in the workplace' conference hosted by Knight Moves.
Divertidamente SLIDE.pptxufururururuhrurid8dj
Hsuehebvdhdueuw8wiiwieih3udud8e8wisbdydvw7wbidj38ehehdheuwjhdiwjwieheheueurhryrurhrgryd7eueue
SECURING BUILDING PERMIT CITY OF CALOOCAN.pdf
How to apply for building permit in the city of Caloocan?
What is a building permit?
Who applies for building permit?
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Passive House: The Economic and Environmental Solution for Sustainable Real Estate. Lecture by Tim Eian of TE Studio Passive House Design in November 2022 in Minneapolis.
- The Built Environment
- Let's imagine the perfect building
- The Passive House standard
- Why Passive House targets
- Clean Energy Plans?!
- How does Passive House compare and fit in?
- The business case for Passive House real estate
- Tools to quantify the value of Passive House
- What can I do?
- Resources
Impact of Fonts: in Web and Apps Design
Fonts play a crucial role in both User Interface (UI) and User Experience (UX) design. They affect readability, accessibility, aesthetics, and overall user perception.
Practical eLearning Makeovers for Everyone
Welcome to Practical eLearning Makeovers for Everyone. In this presentation, we’ll take a look at a bunch of easy-to-use visual design tips and tricks. And we’ll do this by using them to spruce up some eLearning screens that are in dire need of a new look.
Storytelling For The Web: Integrate Storytelling in your Design Process
In this slides I explain how I have used storytelling techniques to elevate websites and brands and create memorable user experiences. You can discover practical tips as I showcase the elements of good storytelling and its applied to some examples of diverse brands/projects..
一比一原版(UW毕业证)西雅图华盛顿大学毕业证如何办理
UW毕业证学历书【微信95270640】做UW文凭、办UW文凭、买UW文凭Q微信95270640买办国外文凭UW毕业证买学历咨询/代办美国毕业证成绩单文凭、办澳洲文凭毕业证、办加拿大大学毕业证文凭英国毕业证学历认证-毕业证文凭成绩单、假文凭假毕业证假学历书制作仿制、改成绩、教育部学历学位认证、毕业证、成绩单、文 凭、UW学历文凭、UW假学位证书、毕业证文凭、、文凭毕业证、毕业证认证、留服认证、使馆认证、使馆证明 、使馆留学回国人员证明、留学生认证、学历认证、文凭认证、学位认证
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理西雅图华盛顿大学西雅图华盛顿大学毕业证假文凭流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！实伙伴平时山娃上学阿黑也摇头晃脑地跟去暑假用不着上学阿黑更是天天围着山娃转山娃上山除了察看埋下的野兽铁夹子看护早上逐上山的大黄牛外也觅着采草药摘红菇积攒起来拿到镇上卖山娃知道母亲身体不好家里盖新房也欠了不少钱总想趁假期赚点钱在校寄宿时用不着老向爷爷奶奶要盛夏的乡村仍旧清凉清清爽爽的山娃也过得自由自在不知为啥山娃总情不自禁地思念起城里的父亲每年暑假瞅见远乡近邻的小伙伴都争先恐后地往城里跑山娃就更思片
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
PDF SubmissionDigital Marketing Institute in Noida
https://www.safalta.com/online-digital-marketing/advance-digital-marketing-training-in-noidaTop Digital Marketing Institute in Noida: Boost Your Career Fast
[3:29 am, 30/05/2024] +91 83818 43552: Safalta Digital Marketing Institute in Noida also provides advanced classes for individuals seeking to develop their expertise and skills in this field. These classes, led by industry experts with vast experience, focus on specific aspects of digital marketing such as advanced SEO strategies, sophisticated content creation techniques, and data-driven analytics.
一比一原版(Columbia毕业证)哥伦比亚大学毕业证如何办理
Columbia毕业证offer【微信95270640】☀《哥伦比亚大学毕业证购买》Q微信95270640《Columbia毕业证文凭补》文凭、本科、硕士、研究生学历都可以做,留信认证的作用：
1：该专业认证可证明留学生真实留学身份。
2：同时对留学生所学专业等级给予评定。
3：国家专业人才认证中心颁发入库证书
4：这个入网证书并且可以归档到地方
5：凡是获得留信网入网的信息将会逐步更新到个人身份内，将在网内查询个人身份证信息后，同步读取人才网入库信息。
6：个人职称评审加20分。
7：个人信誉贷款加10分。
8：在国家人才网主办的全国网络招聘大会中纳入资料，供国家500强等高端企业选择人才《文凭Columbia毕业证书原版制作Columbia成绩单》仿制Columbia毕业证成绩单哥伦比亚大学学位证书pdf电子图》。
办国外哥伦比亚大学哥伦比亚大学毕业证录取书教育部学历学位认证留信认证大使馆认证留学回国人员证明修改成绩单信封申请学校offer录取通知书在读证明offer letter。
快速办理高仿国外毕业证成绩单：
1哥伦比亚大学毕业证+成绩单+留学回国人员证明+教育部学历认证（全套留学回国必备证明材料给父母及亲朋好友一份完美交代）;
2雅思成绩单托福成绩单OFFER在读证明等留学相关材料（申请学校转学甚至是申请工签都可以用到）。
3.毕业证 #成绩单等全套材料从防伪到印刷从水印到钢印烫金高精仿度跟学校原版100%相同。
专业服务请勿犹豫联系我！联系人微信号：95270640诚招代理：本公司诚聘当地代理人员如果你有业余时间有兴趣就请联系我们。
国外哥伦比亚大学哥伦比亚大学毕业证录取书办理过程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。我们的亲人生我养我的父母您们的年迈的苍老换来了我们新一代的新鲜与活力无论我们在哪里父母对我们的爱和思念为我们的生命增加了光彩给予我们自由追求的力量生活的力量我们也不忘感恩正因为这股感恩的线牵着我们使我们在一年的结束时刻义无反顾的踏上了回家的旅途人们常说父母恩最难回报愿我能以当年爸爸妈妈对待小时候的我们那样耐心温柔地对待我将渐渐老去的父母体谅他们以反哺之心奉敬父母以感恩之心孝顺父母哪怕只为父母换洗的
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
Actions and Commands:
Tap, Swipe, and Pinch
Rotate and Shake -Buttons -Menu Bars – Menus
Toolbars - Links- Action Panels
Hover Tools - Keyboard Actions- Drag-and-Drop
Typed Commands-Affordance-Direct Manipulation.
Forms and Controls:
Basics of Form Design
Patterns.
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
Recently uploaded (20)
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
Game Concept Presentation for Ukrainian Mythology Based Game With Designs
ARENA - Young adults in the workplace (Knight Moves).pdf
ARENA - Young adults in the workplace (Knight Moves).pdf
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Connect Conference 2022: Passive House - Economic and Environmental Solution...
Storytelling For The Web: Integrate Storytelling in your Design Process
Storytelling For The Web: Integrate Storytelling in your Design Process
Virtual Tour Application Powerpoint for museum of edinburgh
Virtual Tour Application Powerpoint for museum of edinburgh
PDF SubmissionDigital Marketing Institute in Noida
PDF SubmissionDigital Marketing Institute in Noida
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx
UNIT V ACTIONS AND COMMANDS, FORMS AND CONTROLS.pptx