Substation Line End Clamps - CE22B-ESI-L2
•
0 likes•215 views
This document describes several line end clamps for attaching flexible leads to copper, aluminum, or other tubes. It provides the diameter ranges for each clamp model, as well as details on attachment and testing specifications. The clamps are CE22B/ESI-L2 for 38-76mm tubes, CE22C/ESI-L3 for 60-90mm tubes, CE22C/A+B for 19-76mm tubes, and CE16/5/ESI-L4 tested to 50kA for 127mm aluminum tubes. Contact information is also provided at the bottom for the manufacturer.
Report
Share
Report
Share
Download to read offline
Recommended
Earthing Stubs
This document provides information on earthing stubs and equipment for substations manufactured by Thorne and Derrick UK. It includes:
1. Details on different types of earthing stubs for aluminium and bronze with varying diameters, lengths, and bolt fixing centers for mounting in substations at voltages from 132kV to 400kV.
2. Instructions for mounting the stubs in stipulated positions in aluminium or copper busbar substations, including the optional use of corona shields on some aluminium stubs.
3. Images and codes for identifying the various earthing stub models along with their suitable applications.
Inverters XVFXSeries_SpecSheet_01.2013_lr
The document describes OutBack Power's FX and VFX series of true sinewave inverter/chargers. The inverter/chargers incorporate a DC-to-AC sinewave inverter, battery charger and AC transfer relay within a die-cast aluminum chassis. They offer intelligent battery charging, modular and stackable design, high efficiency, integrated communications, and a 5-year warranty. The sealed FX series is designed for harsh environments while the vented VFX series allows high power output in hot conditions. OutBack Power inverter/chargers provide a complete power solution for homes, businesses or extreme applications.
611565S01B 02A & 03B
This document contains details for reinforcement and ground beams, including sections and scale drawings. It also includes a lintel schedule specifying the reference, length, and materials for 12 different lintels. Notes indicate that internal lintels should be pre-stressed concrete with minimum 100mm end bearing.
Gmaw-ador welding
Inverter based GMAW outfit
High efficiency and high power factor – resulting energy saving
Auto “Weld Stop” when welding torch is taken away from weld job
Compatible to Power Generator Supply
Enhanced Reliability due to SMD technology
Digital Panel for adjusting the welding parameters
30% more Energy efficient than conventional machines
Ub20xx Euramco Ramfan FSESAFE Singapore
This document provides specifications for the UB20xx blower/exhauster. It is an explosion-proof blower manufactured to meet ATEX and IEC explosive atmosphere standards. It features a flameproof motor enclosure, thermally protected switch, and durable plastic casing. Accessories include flexible ducts, duct connectors, and a manhole entry device to ventilate confined spaces safely. The unit provides high airflow while minimizing explosion risks as it has undergone whole-unit certification, testing all electrical components together.
407113 ds en
This document provides specifications for a heavy duty metal vane anemometer that can measure air velocity, temperature, and airflow. It has a large LCD display and can measure air speed up to 78.3 MPH with 2% accuracy using a ball bearing vane wheel. The anemometer can simultaneously display instantaneous measurements, averages over 20 points, or 2/3 flow values and includes features like data hold, minimum/maximum readings, and the option of battery or AC power.
WC-4001
This document provides specifications for an electronic weighing indicator. It has a 7-digit display, operates from -10 to 45 degrees Celsius, supports up to 8 load cells, and includes features like unit selection, auto-zero tracking, and high/low indicators. Power options include 110V or 200V AC at 50-60Hz, and it can interface with devices via RS232 or serial printer output.
Premier Filters / SINGLE PHASE FILTERS / PFM80S 300VAC
Premier Filters’ Military/COTS EMI power line filters are designed for off-the-shelf performance to meet Mil-STD-461 and DO-160 conducted emission requirements. Please see our Military EMI Filters on the link below.
https://www.premieremc.com/
Recommended
Earthing Stubs
This document provides information on earthing stubs and equipment for substations manufactured by Thorne and Derrick UK. It includes:
1. Details on different types of earthing stubs for aluminium and bronze with varying diameters, lengths, and bolt fixing centers for mounting in substations at voltages from 132kV to 400kV.
2. Instructions for mounting the stubs in stipulated positions in aluminium or copper busbar substations, including the optional use of corona shields on some aluminium stubs.
3. Images and codes for identifying the various earthing stub models along with their suitable applications.
Inverters XVFXSeries_SpecSheet_01.2013_lr
The document describes OutBack Power's FX and VFX series of true sinewave inverter/chargers. The inverter/chargers incorporate a DC-to-AC sinewave inverter, battery charger and AC transfer relay within a die-cast aluminum chassis. They offer intelligent battery charging, modular and stackable design, high efficiency, integrated communications, and a 5-year warranty. The sealed FX series is designed for harsh environments while the vented VFX series allows high power output in hot conditions. OutBack Power inverter/chargers provide a complete power solution for homes, businesses or extreme applications.
611565S01B 02A & 03B
This document contains details for reinforcement and ground beams, including sections and scale drawings. It also includes a lintel schedule specifying the reference, length, and materials for 12 different lintels. Notes indicate that internal lintels should be pre-stressed concrete with minimum 100mm end bearing.
Gmaw-ador welding
Inverter based GMAW outfit
High efficiency and high power factor – resulting energy saving
Auto “Weld Stop” when welding torch is taken away from weld job
Compatible to Power Generator Supply
Enhanced Reliability due to SMD technology
Digital Panel for adjusting the welding parameters
30% more Energy efficient than conventional machines
Ub20xx Euramco Ramfan FSESAFE Singapore
This document provides specifications for the UB20xx blower/exhauster. It is an explosion-proof blower manufactured to meet ATEX and IEC explosive atmosphere standards. It features a flameproof motor enclosure, thermally protected switch, and durable plastic casing. Accessories include flexible ducts, duct connectors, and a manhole entry device to ventilate confined spaces safely. The unit provides high airflow while minimizing explosion risks as it has undergone whole-unit certification, testing all electrical components together.
407113 ds en
This document provides specifications for a heavy duty metal vane anemometer that can measure air velocity, temperature, and airflow. It has a large LCD display and can measure air speed up to 78.3 MPH with 2% accuracy using a ball bearing vane wheel. The anemometer can simultaneously display instantaneous measurements, averages over 20 points, or 2/3 flow values and includes features like data hold, minimum/maximum readings, and the option of battery or AC power.
WC-4001
This document provides specifications for an electronic weighing indicator. It has a 7-digit display, operates from -10 to 45 degrees Celsius, supports up to 8 load cells, and includes features like unit selection, auto-zero tracking, and high/low indicators. Power options include 110V or 200V AC at 50-60Hz, and it can interface with devices via RS232 or serial printer output.
Premier Filters / SINGLE PHASE FILTERS / PFM80S 300VAC
Premier Filters’ Military/COTS EMI power line filters are designed for off-the-shelf performance to meet Mil-STD-461 and DO-160 conducted emission requirements. Please see our Military EMI Filters on the link below.
https://www.premieremc.com/
DP series Meter Socket
Features:
100A 120/240V AC, Single phase, 2 or 3 wires
Line and load lugs: 1/10 MAX, Cu‐Al
Conforms to ANSL 12.7
Mounting: Surface, Pole outdoor
Locking: sealing ring has lock provision;
Housing:
Die cast Aluminum electro statically applied epoxy baked
gray powder finished.
Round type base.
NEMA 3R Rating for outdoor used.
Akribis xrv(en) 270412 brochure
This document provides specifications for the XRV series of linear motors from Electromate, including the XRV76, XRV97, and XRV115 models. It lists technical details such as continuous and peak forces, power requirements, load capacity, precision metrics, and part numbering conventions. The motors are available with various encoder and resolution options to suit positioning needs.
Trans kpcl
This document provides information about various power generation stations in India including:
- Thermal power stations like RTPS with details on unit capacities, generator voltages and currents, transmission line voltages and ratings.
- Hydel power stations like Bhadra, Mani DPH, Gerusoppa with details on unit capacities, generator voltages and currents, numbers of transmission lines.
- Information is presented station-wise in a table format with columns for station name, unit capacities and details, generator parameters, transmission line voltages and ratings.
Electrocraft 72 rpm_sync_specsheet
This document provides specifications for 72 RPM AC synchronous motors available in frame sizes 23, 34, and 42. The motors are totally enclosed with permanently lubricated ball bearings and can achieve 72 RPM without gearing. They can be reversed with a single pole switch and stalled without harm. Versions are also available to run at 60 RPM from 50 Hz AC power. Electrical ratings and dimensions are provided for various motor models.
Cembre C Tap Crimp Connectors
Cembre C Tap crimps are suitable for establishing earthing systems and tapping off from low voltage overhead lines - C tap crimps accomodate copper cable conductors including run and tap offs, 2.5sqmm to 240sqmm. Tin plated and bright surface finish C Tap connectors are available.
Typical "C" Tap copper connectors applications - copper tap connections, joint connections and jointing two parallel running conductors.
Cembre copper "C" Tap connectors are manufactured from high purity copper profiles and are suitable for a variety of uses. Each copper connectors is marked as follows :
Cembre trade mark
Cembre reference number
Conductor size-run
Conductor size-tap
Number of crimps
Cembre die reference
Kemet Webinar - Caps for 48V Boardnet application
This document summarizes a KEMET webinar about capacitor solutions for 48V automotive applications. It discusses the 48V landscape and component requirements, and provides an overview of KEMET's product offerings including metal composite power inductors, EMI choke coils, axial and radial electrolytic capacitors, and rectangular electrolytic capacitors. It also discusses ceramic capacitor offerings, polymer capacitors, press-fit technologies, and lifetime calculations. The webinar focused on KEMET's portfolio and new products for meeting the emerging needs of 48V automotive electronics applications.
Cross flow dry type transformer fans
STE Technic provides optimal air cooling solutions for transformers using high performance induction motor cross flow fans. The fans are designed to dissipate heat from dry type transformers while meeting industrial requirements and ensuring safe operation. The fans use optimized aerodynamic blades and galvanized casing and guards. They have overload protection and can operate in temperatures from -25°C to 60°C.
Product bulletin ametek 115684
- This document provides specifications for a 240V, 60Hz vacuum motor from Lamb Electric, including performance data at different orifice diameters and airflow.
- Key features include provisions for grounding, an epoxy painted fan case, and UL recognition. The motor offers a range of performance levels for applications requiring separation of working air from motor ventilation.
- Dimensions and an important safety note are also included, warning that the motor should not be used where it could come into contact with liquids, foam or volatile materials without additional machine design to prevent substances from reaching internal components.
M#3 75 hp 07-25-13
This document contains specifications for circuit breaker CBL-AHU-S3 and motor overload protection for a 75HP air handling unit motor (AHU-S3 M#3). It lists the trip current ratings and thermal overload settings for the circuit breaker and overload protection. It also includes short circuit current ratings and identifies the motor and associated soft starter as a 75HP unit.
Applimotion ho series_motors_datasheet
This document introduces the HO series NEMA 23 brushless motors from Applimotion for direct drive rotary applications. The motors have a large through hole, NEMA 23 mounting flange, and high performance magnets. They offer high resolution encoder options, sinusoidal torque curves, and are designed to replace geared mechanical stages for better accuracy and reliability. Key specifications are provided for motor torque, speed, current, resistance, weight and dimensions.
MIL/COTS THREE PHASE EMI FILTERS (DELTA)
This document provides specifications for a compact COTS 3-phase delta chassis mount filter with ratings from 10A to 80A. It lists the part numbers, weights, insertion loss characteristics, and mechanical dimensions for filters ranging from 10 to 80 amps. Contact information is provided for the manufacturer's website and phone number to obtain additional information or place an order.
M#2 60 hp 07-25-13
This document contains technical specifications for circuit breaker CBL-AHU-S1, including its trip current of 200 amps, thermal curve settings, and instantaneous trip setting of 1000 amps. It also lists specifications for a motor overload relay for a 60HP motor protected by this circuit breaker, including its class 20 thermal settings. Ratings are provided for short circuit currents through the circuit breaker in both 3-phase and single-line-to-ground fault configurations.
Teac tc pf Load cell for automotive pedal force measurement
TEAC LOAD CELL TC-PF(T)
For measurement of force exerted on the pedal during brake performance test of automobile
Applimotion ho series_slotless_motors_datasheet
The document introduces the HO series NEMA 23 brushless motors from Applimotion for precision direct drive applications. The motors feature a large through hole, NEMA 23 mounting flange, high performance magnets, and optional windings. They provide sinusoidal torque curves, high resolution encoders up to 29 million counts per revolution, and are designed to replace geared mechanical stages for better accuracy and reliability. Key specifications for motor model 63-B-44-A are listed.
Thông số kĩ thuật schneider MCB C60 N
Thông số kĩ thuật schneider MCB C60 NCông ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
This document provides information on Marine C60N circuit breakers, including:
1) Catalog numbers and ratings for 1P, 2P, 3P, and 4P circuit breakers ranging from 1A to 63A.
2) Details on the circuit protection, increased product life, positive contact indication, and marine approvals of the C60N circuit breakers.
3) Dimensions, weights, technical specifications on insulation voltage, tripping, utilization category, and compliance with IACS standards.Thông số kĩ thuật Schneider MCB C120H
Thông số kĩ thuật Schneider MCB C120HCông ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
This document provides information on C120H circuit breakers including their function, technical data, description, curves, and catalogue numbers. The circuit breakers provide protection of cables against overloads and short-circuits in final distribution with manual control and isolation. They have current ratings from 10 to 125A and comply with relevant standards with breaking capacities up to 15kA. The document lists specifications for B, C, and D curve models.RaaXRoboticsActuatorsproductsheets112014
RaaX Robotics introduces a new modular linear actuator design that allows users to interchange actuator components for different stroke lengths or motor gear ratios. The modular design offers flexibility and cost savings compared to traditional linear actuators. The linear actuators are available in stroke lengths from 2 to 16 inches and include DC motors with gear ratios of 29:1 or 73:1 for variable-speed actuation.
Substation Line End Clamps - CE25
This document provides specifications for various portable earthing clamps and equipment for substations. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications, dimensions for tube/conductor diameters, number of leads that can be attached, and amperage and time tested. It also includes diagrams of some clamps and specifications for earth tapes the CE57 clamp can be used with.
Substation Line End Clamps - CE16-5.5-ESI-L5
This document provides specifications for various portable earthing clamps and equipment for substations. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications, dimensions and diameters they are suited for, number of leads that can be attached, and maximum currents and durations they are tested to withstand. It also includes diagrams of some clamps and specifications for earth tapes the CE57 clamp can be used with.
Substation Line End Clamps - CE50
This document provides specifications for various portable earthing clamps and equipment for substations. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications, dimensions for tube/conductor diameters, number of leads that can be attached, and amperage and time tested. It also includes diagrams of some clamps and specifications for earth tapes the CE57 clamp can be used with.
Substation Line End Clamps - CE51
This document provides specifications for various portable earthing clamps and equipment from Thorne and Derrick. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications like tube diameter and material, number of leads, and maximum current and time ratings during testing. Dimensions are also provided for some of the clamps. The document is a catalogue of Thorne and Derrick's portable earthing equipment for substations.
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...Thorne & Derrick International
This document provides information on low voltage and medium voltage hydrocarbon resistant cable joints for oil, gas, and petrochemical applications. It describes the resin encapsulation and shells that provide resistance to hydrocarbons. Details are given on straight joint designs and sizing for copper and aluminum conductor cables from 1.5mm2 to 500mm2 at voltages of 600/1000V, 11kV, and 33kV. Connector options and build up kits for joining cables of different sizes are also listed.More Related Content
What's hot
DP series Meter Socket
Features:
100A 120/240V AC, Single phase, 2 or 3 wires
Line and load lugs: 1/10 MAX, Cu‐Al
Conforms to ANSL 12.7
Mounting: Surface, Pole outdoor
Locking: sealing ring has lock provision;
Housing:
Die cast Aluminum electro statically applied epoxy baked
gray powder finished.
Round type base.
NEMA 3R Rating for outdoor used.
Akribis xrv(en) 270412 brochure
This document provides specifications for the XRV series of linear motors from Electromate, including the XRV76, XRV97, and XRV115 models. It lists technical details such as continuous and peak forces, power requirements, load capacity, precision metrics, and part numbering conventions. The motors are available with various encoder and resolution options to suit positioning needs.
Trans kpcl
This document provides information about various power generation stations in India including:
- Thermal power stations like RTPS with details on unit capacities, generator voltages and currents, transmission line voltages and ratings.
- Hydel power stations like Bhadra, Mani DPH, Gerusoppa with details on unit capacities, generator voltages and currents, numbers of transmission lines.
- Information is presented station-wise in a table format with columns for station name, unit capacities and details, generator parameters, transmission line voltages and ratings.
Electrocraft 72 rpm_sync_specsheet
This document provides specifications for 72 RPM AC synchronous motors available in frame sizes 23, 34, and 42. The motors are totally enclosed with permanently lubricated ball bearings and can achieve 72 RPM without gearing. They can be reversed with a single pole switch and stalled without harm. Versions are also available to run at 60 RPM from 50 Hz AC power. Electrical ratings and dimensions are provided for various motor models.
Cembre C Tap Crimp Connectors
Cembre C Tap crimps are suitable for establishing earthing systems and tapping off from low voltage overhead lines - C tap crimps accomodate copper cable conductors including run and tap offs, 2.5sqmm to 240sqmm. Tin plated and bright surface finish C Tap connectors are available.
Typical "C" Tap copper connectors applications - copper tap connections, joint connections and jointing two parallel running conductors.
Cembre copper "C" Tap connectors are manufactured from high purity copper profiles and are suitable for a variety of uses. Each copper connectors is marked as follows :
Cembre trade mark
Cembre reference number
Conductor size-run
Conductor size-tap
Number of crimps
Cembre die reference
Kemet Webinar - Caps for 48V Boardnet application
This document summarizes a KEMET webinar about capacitor solutions for 48V automotive applications. It discusses the 48V landscape and component requirements, and provides an overview of KEMET's product offerings including metal composite power inductors, EMI choke coils, axial and radial electrolytic capacitors, and rectangular electrolytic capacitors. It also discusses ceramic capacitor offerings, polymer capacitors, press-fit technologies, and lifetime calculations. The webinar focused on KEMET's portfolio and new products for meeting the emerging needs of 48V automotive electronics applications.
Cross flow dry type transformer fans
STE Technic provides optimal air cooling solutions for transformers using high performance induction motor cross flow fans. The fans are designed to dissipate heat from dry type transformers while meeting industrial requirements and ensuring safe operation. The fans use optimized aerodynamic blades and galvanized casing and guards. They have overload protection and can operate in temperatures from -25°C to 60°C.
Product bulletin ametek 115684
- This document provides specifications for a 240V, 60Hz vacuum motor from Lamb Electric, including performance data at different orifice diameters and airflow.
- Key features include provisions for grounding, an epoxy painted fan case, and UL recognition. The motor offers a range of performance levels for applications requiring separation of working air from motor ventilation.
- Dimensions and an important safety note are also included, warning that the motor should not be used where it could come into contact with liquids, foam or volatile materials without additional machine design to prevent substances from reaching internal components.
M#3 75 hp 07-25-13
This document contains specifications for circuit breaker CBL-AHU-S3 and motor overload protection for a 75HP air handling unit motor (AHU-S3 M#3). It lists the trip current ratings and thermal overload settings for the circuit breaker and overload protection. It also includes short circuit current ratings and identifies the motor and associated soft starter as a 75HP unit.
Applimotion ho series_motors_datasheet
This document introduces the HO series NEMA 23 brushless motors from Applimotion for direct drive rotary applications. The motors have a large through hole, NEMA 23 mounting flange, and high performance magnets. They offer high resolution encoder options, sinusoidal torque curves, and are designed to replace geared mechanical stages for better accuracy and reliability. Key specifications are provided for motor torque, speed, current, resistance, weight and dimensions.
MIL/COTS THREE PHASE EMI FILTERS (DELTA)
This document provides specifications for a compact COTS 3-phase delta chassis mount filter with ratings from 10A to 80A. It lists the part numbers, weights, insertion loss characteristics, and mechanical dimensions for filters ranging from 10 to 80 amps. Contact information is provided for the manufacturer's website and phone number to obtain additional information or place an order.
M#2 60 hp 07-25-13
This document contains technical specifications for circuit breaker CBL-AHU-S1, including its trip current of 200 amps, thermal curve settings, and instantaneous trip setting of 1000 amps. It also lists specifications for a motor overload relay for a 60HP motor protected by this circuit breaker, including its class 20 thermal settings. Ratings are provided for short circuit currents through the circuit breaker in both 3-phase and single-line-to-ground fault configurations.
Teac tc pf Load cell for automotive pedal force measurement
TEAC LOAD CELL TC-PF(T)
For measurement of force exerted on the pedal during brake performance test of automobile
Applimotion ho series_slotless_motors_datasheet
The document introduces the HO series NEMA 23 brushless motors from Applimotion for precision direct drive applications. The motors feature a large through hole, NEMA 23 mounting flange, high performance magnets, and optional windings. They provide sinusoidal torque curves, high resolution encoders up to 29 million counts per revolution, and are designed to replace geared mechanical stages for better accuracy and reliability. Key specifications for motor model 63-B-44-A are listed.
Thông số kĩ thuật schneider MCB C60 N
Thông số kĩ thuật schneider MCB C60 NCông ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
This document provides information on Marine C60N circuit breakers, including:
1) Catalog numbers and ratings for 1P, 2P, 3P, and 4P circuit breakers ranging from 1A to 63A.
2) Details on the circuit protection, increased product life, positive contact indication, and marine approvals of the C60N circuit breakers.
3) Dimensions, weights, technical specifications on insulation voltage, tripping, utilization category, and compliance with IACS standards.Thông số kĩ thuật Schneider MCB C120H
Thông số kĩ thuật Schneider MCB C120HCông ty cổ phần OKS | Tổng thầu thi công Nhà máy GMP, Tổng thầu thi công Nhà kho GSP
This document provides information on C120H circuit breakers including their function, technical data, description, curves, and catalogue numbers. The circuit breakers provide protection of cables against overloads and short-circuits in final distribution with manual control and isolation. They have current ratings from 10 to 125A and comply with relevant standards with breaking capacities up to 15kA. The document lists specifications for B, C, and D curve models.RaaXRoboticsActuatorsproductsheets112014
RaaX Robotics introduces a new modular linear actuator design that allows users to interchange actuator components for different stroke lengths or motor gear ratios. The modular design offers flexibility and cost savings compared to traditional linear actuators. The linear actuators are available in stroke lengths from 2 to 16 inches and include DC motors with gear ratios of 29:1 or 73:1 for variable-speed actuation.
What's hot (17)
Teac tc pf Load cell for automotive pedal force measurement
Teac tc pf Load cell for automotive pedal force measurement
Similar to Substation Line End Clamps - CE22B-ESI-L2
Substation Line End Clamps - CE25
This document provides specifications for various portable earthing clamps and equipment for substations. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications, dimensions for tube/conductor diameters, number of leads that can be attached, and amperage and time tested. It also includes diagrams of some clamps and specifications for earth tapes the CE57 clamp can be used with.
Substation Line End Clamps - CE16-5.5-ESI-L5
This document provides specifications for various portable earthing clamps and equipment for substations. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications, dimensions and diameters they are suited for, number of leads that can be attached, and maximum currents and durations they are tested to withstand. It also includes diagrams of some clamps and specifications for earth tapes the CE57 clamp can be used with.
Substation Line End Clamps - CE50
This document provides specifications for various portable earthing clamps and equipment for substations. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications, dimensions for tube/conductor diameters, number of leads that can be attached, and amperage and time tested. It also includes diagrams of some clamps and specifications for earth tapes the CE57 clamp can be used with.
Substation Line End Clamps - CE51
This document provides specifications for various portable earthing clamps and equipment from Thorne and Derrick. It describes 7 different clamps - the CE16/5.5/ESI-L5, CE25, CE50, CE51, CE57, and ESI-T1. For each clamp, it provides details on intended applications like tube diameter and material, number of leads, and maximum current and time ratings during testing. Dimensions are also provided for some of the clamps. The document is a catalogue of Thorne and Derrick's portable earthing equipment for substations.
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...Thorne & Derrick International
This document provides information on low voltage and medium voltage hydrocarbon resistant cable joints for oil, gas, and petrochemical applications. It describes the resin encapsulation and shells that provide resistance to hydrocarbons. Details are given on straight joint designs and sizing for copper and aluminum conductor cables from 1.5mm2 to 500mm2 at voltages of 600/1000V, 11kV, and 33kV. Connector options and build up kits for joining cables of different sizes are also listed.LV & MV Hydrocarbon Resistant_cable_joints-
This document provides information on low voltage (LV) and medium voltage (MV) cable joints that are resistant to hydrocarbons.
It describes two ranges of joints - LV joints that use Prysmian's low hazard resin and rigid shells, and MV joints that use Prysmian's Elaspeed cold-shrink joint bodies for faster installation. Both LV and MV joints are enclosed in JEM resin and glass reinforced shells to provide excellent resistance to hydrocarbons.
The document provides specifications for various joint models including dimensions, compatible connectors, and cable size ranges for LV straight joints and MV Elaspeed straight joints for 11kV, 33kV applications.
PB Weir Substation Earth End Clamps - CE22-BESI-L2 & CE20-ESI-E1
This document provides information about portable earthing equipment for high voltage substations, including:
- It describes the various components of the portable earthing equipment such as earth end clamps, line end clamps, operating sockets, insulated operating poles, and earth leads.
- It explains the design and construction requirements for the equipment to meet safety standards, and provides technical details and specifications for each component.
- It provides guidance on selecting the appropriate equipment based on current rating requirements, and instructions for properly applying and maintaining the earthing equipment.
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Conn...
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Conn...Thorne & Derrick International
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Connectors.
Load Break Elbows
A load break elbow when used with a hot stick can be connected or disconnected at high voltage under load, but can only be used with up to a 250kcmil cable. At 100% insulation level, a 250kcmil is good for 345A in underground duct, so you would be de-rating your system by using a 200A elbow with a 250kcmil cable, but they are still widely used due to the flexibility given to the high voltage distribution system at the equipment. Think about it…if you had a critical application where power disruptions were extremely costly and maintenance was required on up-stream equipment in, let’s say a non critical area, this product would be great. You could disconnect the load without disturbing the critical portions, perform the maintenance and then reconnect it. Just make sure to take safety precautions, making and breaking electrical connections under load is very dangerous. The load break elbow is typically not used in man-holes, because it does not allow expansion like the dead break elbow. The construction of the load break elbow does not allow it to be connected to other elbows, but the dead break does.
Dead Break Elbows
A dead break or “hammerhead” elbow can only be disconnected when not under load, this is because you need to actually unscrew a pin to detach it. It would be pretty tough to unscrew the pin with a hot stick and the arc from the disconnected load, if under load, would be pretty substantial. A dead break elbow allows an increased current rating (up to 600A) and can be used on basically all cable types. At 100% insulation level a 750kcmil cable is rated 610A in underground duct. When would you use a 750kcmil? In most non-utility cases you would design or install sets of 500kcmil or smaller if you needed more than one 500kcmil could handle. Even from a 1200A breaker, two sets of 500kcmil per phase would be sufficient for distribution (about 1000A), if the load was even that high. Most of the time you set the relays down to the actual load in order to limit the copper used. A dead break when used in man-holes for splicing cables allows the flexibility of connecting more than two cables together as well as future expansion if required. Say another building was added that needed power, you could just connect that building to the existing array of dead break elbows. This also works great when temporary power is needed for construction or even if the circus is in town and they need medium voltage (it happens!). They can pick up power from the man-hole with the dead break elbows or from a piece of equipment with dead break elbows. I’ve heard that ships are now starting to use medium voltage shore power, I wonder what kind of connections they use.
Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...
Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...Thorne & Derrick International
This document provides a product selection guide for cable accessories used in 5kV-35kV distribution systems, including loadbreak and deadbreak separable connectors, cable joints, cable terminations, and other components. It lists the various elbow connectors, joints, terminations and accessories available from Elastimold in 1-3 sentences per product type and includes voltage ratings, current ratings, and part numbers. Additional sections provide reference information on specifications, cable sizes and standards.PIPE_ENG_06.pdf
The document discusses welding consumables for pipeline construction from Böhler Welding. It provides recommendations for different types of welding consumables including cellulosic electrodes, basic electrodes for vertical down and vertical up welding, and flux cored wires. The recommendations include which consumable products to use for welding different steel grades according to international standards like API and EN.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...
te connectivity saudi arabia
TYCO TERMINATION KIT IN ALL VOLTAGE
Raychem terminations for polymeric and MIND
paper insulated cables from 7.2 kV up to 36 kV
System Designer
케이블 종단-거-瑞侃工具包电缆终端-阿克巴交易
ชุด การเลิกจ้าง
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS)
11kV-33kV Medium Voltage Heat Shrink Cable Joints & Cable Terminations
11kV and 33kV heat shrink cable joints and cable terminations for medium voltage power cables - SPS heat shrink cable joints and cable terminations are suitable for installation at indoors and outdoors in the Middle East countries, this includes salt laden and dusty atmospheres associated with the Middle East oil, gas and petrochemical industries. Cable terminations and cable joints are suitable for XLPE and paper insulated single core and three 3 core cables of 11kV and 33kV voltages, 3 phase, 50HZ type electrical systems with highest system voltages of 12kV and 36kV. Cable joints are suitable for connecting two XLPE insulated cables of same size or dissimilar sizes and for transition between XLPE and paper insulated lead covered (PILC) medium voltage cables.
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...
EPKT- 17C3MOH3 B21 G43
36for 36 kVSize in mm27.2 kV 12 kV & 17.5 kV 24 kV 36 kVA 16 - 50 16 - 25 - -B 70 - 120 35 - 70 25 - 50 -C 150 - 240 95 - 240 70 - 185 50 - 95D300 - 500 300 - 400 240 - 300 120 - 185E630 - 1000 500 - 800 400 - 630 240 - 500F - 1000 800 - 1000 630 - 1000No. of Cores1 for single (1) core3for three (3) coreDielectric of insulation typeX for PLASTIC eg. XLPE, EPDM, EPR, etc.M for MIND non-draining paper (not applicable for draining paper cables)Location of the terminationI for INDOORO for OUTDOORLength (only 3-core) of the terminated portion (tail)H1 for 450 mm longH2for 650 mm long (min for 17.5 kV outdoor & 36 kV indoor)H3for 800 mm long (min for 24 kV outdoor & 36 kV outdoor)H4for 1200 mm long
12 - 18 16 - 50 16 - 50 16 - 25 - - EAKT 1655 G 55
Prysmian Bicon Aluminium Claw Cleats - 370 Series Claw Cable Cleat
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for securing cables with diameters between 10-51mm in industrial or outdoor environments. The cleat has a two-piece, single fixing design and can be stacked up to three high. It is resistant to temperatures between -60°C and +105°C.
Prysmian Bicon 370BA07 32-38mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA07 32-38mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...Thorne & Derrick International
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for use with cable diameters between 10-51mm and can withstand temperatures from -60°C to +105°C. The claw cleat is corrosion resistant and can be used for indoor or outdoor applications.Prysmian Bicon 370BA04 19-22mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA04 19-22mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...Thorne & Derrick International
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for use with cable diameters between 10-51mm and can withstand temperatures from -60°C to +105°C. The claw cleat is corrosion resistant and can be used for indoor or outdoor applications.Prysmian Bicon 370BA05 22-25mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA05 22-25mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...Thorne & Derrick International
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for use with cable diameters between 10-51mm and can withstand temperatures from -60°C to +105°C. The claw cleat is corrosion resistant and can be used for indoor or outdoor applications.Prysmian Bicon 370BA09 44-51mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA09 44-51mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...Thorne & Derrick International
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for securing cables with diameters between 10-51mm in industrial or outdoor environments. The cleat has a two-piece, single fixing design and can be stacked up to three high. It is resistant to temperatures between -60°C and +105°C.Prysmian Bicon 370BA08 38-44mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA08 38-44mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...Thorne & Derrick International
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for securing cables with diameters between 10-51mm in industrial or outdoor environments. The cleat has a two-piece, single fixing design and can be stacked up to three high. It is resistant to temperatures between -60°C and +105°C.Prysmian Bicon 370BA01 10-13mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA01 10-13mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...Thorne & Derrick International
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for securing cables with diameters between 10-51mm in industrial or outdoor environments. The cleat has a two-piece, single fixing design and can be stacked up to three high. It is resistant to temperatures between -60°C and +105°C.Prysmian Bicon 370BA06 25-32mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA06 25-32mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...Thorne & Derrick International
The Aluminium Claw Cleat is an LUL approved cable cleat manufactured from aluminium alloy. It is suitable for securing cables with diameters between 10-51mm in industrial or outdoor environments. The cleat has a two-piece, single fixing design and can be stacked up to three high. It is resistant to temperatures between -60°C and +105°C.Similar to Substation Line End Clamps - CE22B-ESI-L2 (20)
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...
Prysmian BICAST - LV Cable Joints Hydrocarbon Resistant for Oil, Gas, Petroch...
PB Weir Substation Earth End Clamps - CE22-BESI-L2 & CE20-ESI-E1
PB Weir Substation Earth End Clamps - CE22-BESI-L2 & CE20-ESI-E1
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Conn...
Elastimold - HV High Voltage Joints, Terminations, Loadbreak & Deadbreak Conn...
Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...
Elastimold Connectors Loadbreak & Deadbreak, Cable Joints & Cable Termination...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) |AKBAR TRADING EST. SAUDI ARABIA...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...
RAYCHEM SAUDI ARABIA LTD. (TYCO ELECTRONICS) Raychem terminations for polymer...
Prysmian Bicon Aluminium Claw Cleats - 370 Series Claw Cable Cleat
Prysmian Bicon Aluminium Claw Cleats - 370 Series Claw Cable Cleat
Prysmian Bicon 370BA07 32-38mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA07 32-38mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA04 19-22mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA04 19-22mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA05 22-25mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA05 22-25mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA09 44-51mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA09 44-51mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA08 38-44mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA08 38-44mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA01 10-13mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA01 10-13mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA06 25-32mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
Prysmian Bicon 370BA06 25-32mm Claw Cable Cleat - Prysmian Bicon Aluminium Ca...
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Recently uploaded (20)
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Generative AI Deep Dive: Advancing from Proof of Concept to Production
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Substation Line End Clamps - CE22B-ESI-L2
- 1. Line End Clamp CE22B/ESI -L2 Fig.5 CODE CE22B/ESI-L2 Line End Clamp For application to clean or dirty copper or aluminium tube, within the range:- 38-76mm diameter Provision for attachment of one flexible lead as in Fig 13. NOTE: For attachment the operating pole should be rotated with normal form hand pressure until a definite resistance to further movement is experienced. 245 max SECTION 1 Portable Earthing Equipment for Sub-Stations P & B WE I R E A R T H I N G E Q U I PME N T C ATA L O G U E 2 0 0 0 4 Max width = 63.5 Line End Clamp CE22C/ESI -L3 Line End Clamp CE22 A+B CE16/5/ESI -L4 All sizes are in Millimetres Tested to 17.5kA for 2 secs. Fig. 6 CODE CE22C/ESI-L3 Line End Clamp For application to clean or dirty copper or aluminium tube, within the range:- 60-90mm diameter Provision for attachment of one flexible lead as in Fig 13. NOTE: For attachment the operating pole should be rotated with normal firm hand pressure until a definite resistance to further movement is experienced. Tested to 17.5kA for 2 secs. Fig. 7 CODE CE22C/A+B Line End Clamp For application to clean or dirty copper or aluminium tube, within range:- 19-76mm diameter. NOTE: For attachment the operating pole should be rotated with normal firm hand pressure until a definite resistance to further movement is experienced. Tested to 17.5kA for 2 secs. Fig. 8 CE16/5/ESI-L4 For application to aluminium tube 127mm diameter only. Provisions for attachment of three flexible leads as in Fig.13. Tested to 50kA for 3 secs. Max width = 63.5 270 max 230 235 Max width = 81 238 Cable end 208 187 Max width = 51 325 230 THORNE AND DERRICK UK – LEAK DETECTION TEL: 0044 (0)191 490 1547 FAX: 0044 (0)191 477 5371 TEL: 0044 (0)117 977 4647 FAX: 0044 (0)117 477 5582 WWW.HEATTRACING.CO.UK WWW.THORNEANDDERRICK.CO.UK e-mail: northernsales@thorneandderrick.co.uk