1. Copyright RaaX Robotics 2014
Introducing Modular Linear Actuators
Offered by RaaX Robotics
Now for the first time you can interchange actuator components ! The new patent pending actuator design gives you the ability to simply change out the actuator module if you need a longer actuation stroke length or if you need different motor gear ratio simply change out the motor module. Perfect for any project where you need linear actuation in a tight package using minimal space.
2. Copyright RaaX Robotics 2014
Lowering your cost & increasing versatility. DC Motor and driver is included and designed for variable speed use with both analog and PWM program compatibility. Changing components is fast and easy- 4 screws is all it takes !
100mm (4 inch), 200mm (8 inch), 300mm (12 inch) shown above
1) Variable Speed.
2) Accurate real time position feedback .
3) programmed limit switch.
4) 6 volt gear motor with 29:1 or 73:1 configurations.
29:1 motor specs- 6 V: 440 RPM and 250 mA free-run, 25 oz-in (1.8 kg-cm) and 3.3 A stall 73:1 motor specs- 6 V: 180 RPM and 250 mA free-run, 60 oz-in (4.3 kg-cm) and 3.3 A stall
5) Anodized finish.
6) Available with actuation lengths of 50mm (2 inch), 100mm (4inch), 200mm (8 inch), 300mm (12 inch) and 400mm (16 inch)
7) Vibration and noise dampening gasket available in 8 fluorescent colors
Accepting pre-production dealer orders at special discounted rates! Check out our product launch on Kickstarter ! RaaX Robotics 1700 E. 18th Street, Suite 102 Tucson, AZ. 85719 (520) 440-7764 www.raaxrobotics.com
3. Copyright RaaX Robotics 2014
Raax Robotics Modular Linear Actuators Specifications High Quality Made in the USA Exterior housings – Anodized Aircraft grade 6061 aluminum Vibration and Noise dampening gasket available in 8 fluorescent colors
1. Motor Module;
a. 20mm dc gear motors available in 29:1 or 73:1 gear ratios
b. Variable Speed
c. Driver TI DRV8xxx
d. Inputs Analog Input 0-5VDC and PWM input for position
e. Processor PIC16F series
f. Cabling 5 wires- Power, Signal ground, Analog Input, PWM Input
2. Actuator Module;
a. Available Stroke lengths of 50mm (2 inch) , 100mm (4 inch), 200mm (8 inch), 300mm (12 inch)
b. Variable speed
c. Sealed bearing
d. Stainless steel Acme screw drive
