This document summarizes the specifications and features of the M3 Stereo Videomic, a stereo X/Y condenser microphone from Rode. It is battery powered, has low noise circuitry, integrated shock mounting and windshield, and outputs high quality stereo audio. Key specifications include a super-cardioid polar pattern, 40Hz-20kHz frequency range, -38dB sensitivity, and 9V battery power requirements. It is designed for broadcast quality sound and includes mounting accessories.

1. M3
STEREO VIDEOMIC
Multi Powered 3/4” Condenser Microphone
X/Y Stereo Directional Video Condenser Microphone
Features
• Stereo X/Y Condenser Microphone
• Broadcast sound quality
• 9V battery powered
• Integrated shock mounting
• Two step High Pass Filter (Flat/80Hz)
• Rugged cast aluminium body
• Low noise circuitry
• Custom designed integrated windshield
• 3.5mm mini-jack output
• Integrated cold-shoe mount, 1/4” and 3/8” thread
• Designed and manufactured in Australia
• Full 10 year warranty*
Specifications
Acoustic Principle Pressure Gradient Directional Pattern Super-Cardioid
Frequency Range 40Hz ~ 20,000Hz Sensitivity -38dB ±2dB re 1V/Pa @ 1kHz
(selectable HPF@80Hz)
Nominal Impedence 200Ω Equivalent Noise 20dBA SPL
(A - weighted per IEC651)
Maximum Output +6.9dBu Dynamic Range 115dB (per IEC651)
(@ 1% THD into 1kΩ)
Maximum SPL 134dB (@ 1kHz, 1% THD into 1kΩ Signal/Noise 74dB SPL
load) (A - weighted per IEC651)
Power Req. 9V alkaline battery Dimensions 170mmL x 102mmH x 65mmD
(Current 7mA)
Output Connection 3.5mm stereo mini-jack Net Weight 176g
Frequency Response Polar Pattern
-2.0
-10.0
-20.0
1KHz
Included Accessories
• DeadKitten windscreen
www.rodemic.com
Australia USA
107 Carnarvon st, Silverwater NSW 2128 Australia 6385 Rose Lane, Carpinteria CA 93013 USA
*After online registration Ph: +61 2 9648 5855 Fx: +61 2 9648 2455 Ph: +1 805 566 7777 Fx: +1 805 566 0071