speed reducer,gearbox bevel, two direction corss gearbox,gear box 90 degree 2:1 ratio,2-1 90 degree gear box,gear reducers 2 to 1 90 deg Input power from 0.1 Kw to 335 Kw. Transmission torque from 10 Nm to 5713 Nm. 1:1 ratio, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 15 mm to 85 mm. 42 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
90 degree gearbox,90 degree bevel gearbox,90 degree 1:1 ratio gearbox,90 degree angle gear drives features:
1. 90 degree angle assembly spiral bevel gears.
2. Used to transmit rotary motion, mechanical power and torque.
3. Milled cubic body small sizes 65x65x65mm to 260x260x260mm.
4. High efficiency bevel gearbox, up to 98%.
5. Gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 and 5:1, customized special gear ratio.
6. Input power from 0.05Kw to 157Kw. Drive torque from 11.56N.m to 1842N.m. Input and output speed from 50 to 1500Rpm (high speed gearbox, contact Jacton engineers).
7. 12mm to 60mm diameter input and output shaft, 8 types shaft arrangements and direction of shaft rotating. Shafts can be rotated in both forward and reverse direction. Clockwise and counter-clockwise rotation direction are available.
8. Soild shaft, hollow shaft and motor flange adapter are available.
9. horizontal mounting, overhung mounting or wall mounting are available.
10. 2 way gearbox, 3 way gearbox, 4 way gearbox are available.
11. low backlash 8 to 15 arcmin, quiet low noise less than 80dB under 1500rpm at 1 meter distance, low working temperature less than 50 degree centigrade.
12. application in printing press, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, satellite dish antennas, gate valve actuators, food processing, robotics, rubber processing, wrapping machine, solar panel, commercial mower, street sweeper, dual steering, bulkhead door opener, scissor lift, vertical pump drive, sand spreader, residential mower, car wash curtain, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader, business form press, feed screw drive, sewage conveyor, collating machinery, mixing equipment, conveyor drive, screw jack system, film processor and pottle packaging equipment. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to press, propel or raise, Jacton bevel gearbox is welcomed and ideal power transmission solution with all these industries.
gearbox power loss right angle gearbox, heavy duty miter gearbox 1:1 5/8 shaft, right angle bevel gear reducer iec input flange Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
ball screw jack,electric ball screw jack,manual ball screw jack,ball screw actuators,ball screw drive,ball screw lifts features:
1. Lifting force 5kN to 500kN. Under max. lifting force, input shaft required torque, high ratio 1.3Nm to 318Nm, low ratio 0.62Nm to 178Nm.
2. Ball screw diameter 16 mm to 100 mm, lead 5 mm to 24 mm.
3. Worm gear ratio 1/5 to 1/32.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. High speed, high precision, high efficiency, high duty cycle, high performance, high frequency operation, low drive torque, long service life.
6. motorized ball screw jack by 3-phase or single phase electric motor/gearmotor, manual ball screw jack by hand wheel/hand crank.
7. Ball screw ends include top plate, clevis end, plain end and threaded end.
8. Individually or multiple ball screw jack lifting system arrangements are available.
9. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
Note: ball screw without self-locking, braking motor, brake mechanism or other locking systems are required when keep the position. When a motorized ball screw jack, less power is required than an equivalent size machine screw jack.
worm gear screw jack,motorised worm gear screw jack,manual worm gear screw jack,worm drive screw jack features:
1. Maximum load capacity from 2.5 ton to 120 ton, maximum torque from 18 Nm to 3315 Nm.
2. Lift screw diameter 30 mm to 180 mm, screw pitch 6 mm to 25 mm.
3. Each jack has two gear ratio from 1/6 to 1/36.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, motor screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1500 mm/min and 375 mm/min.
8. No standard lift screw stroke, maximum travel stroke 1500mm to 7000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple worm gear screw jacks lifting system are available.
11. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
acme screw jack,acme screw actuator,acme screw drive,acme thread screw jack,worm gear lift manufacturer features:
1. Static load capacity maximum 100 ton, dynamic load capacity maximum 26 ton.
2. Lift screw diameter from 20 mm to 100 mm, screw pitch from 5 mm to 16 mm.
3. Each jack model has 3 worm gear ratios from 1/5 to 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounted orientation.
5. Accurate positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual operated screw jack by hand wheel or hand crank, motorized screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1500 mm/min, 750 mm/min and 375 mm/min.
8. No standard lift screw stroke, all lift screw travel length is processed according customers requirements. Under max. compression load, without guides, from 100 mm to 900 mm stroke, with guides from 200 mm to 1800 mm stroke. Under a tension load, from 700 mm to 4500 mm stroke.
9. Lift screw end fittings include top plate, clevis end, plain end and threaded end, standard or your design dimensions are available.
10. Individually or multi worm gear screw jacks system arrangements are available.
11. Compared with fast speed hydraulic cylinder and pneumatic cylinder, it is of easy installation, small sizes, easy operation and maintenance, precisely lifting, self-locking, synchronous speed, environmental protection, multiple units arrangements.
12. Applications in steel mills roller adjustment, pipe mills roller adjustment, tube mills roller adjustment, roll forming mills roller adjustment, plate mills roller adjustment, rolling mills rollers adjustment, powered feeder straightener rolls adjustment, roller system adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, cold roller adjustment, hot roller adjustment, coil handing, semi-finished product handling, brush adjustment belt cleaning, zinc pot lifting mechanism, air knife system adjustment, roll pass system, sizing stand and molten steel pot lifting system. Whatever you pushing, pulling, lifting, adjusting or aligning linear motions need, we will have a the most complete solution for you.
1996 polaris indy rxl snowmobile service repair manualfjjsjeusekkekm
This document provides publication numbers and service bulletin indexes for Polaris snowmobiles from 1994-1998. It lists the model, model number, owner's manual part number, parts manual part number, and other relevant documentation for each year. The document also provides indexes of service bulletins by number and year to allow technicians to quickly look up technical service information.
90 degree gearbox,90 degree bevel gearbox,90 degree 1:1 ratio gearbox,90 degree angle gear drives features:
1. 90 degree angle assembly spiral bevel gears.
2. Used to transmit rotary motion, mechanical power and torque.
3. Milled cubic body small sizes 65x65x65mm to 260x260x260mm.
4. High efficiency bevel gearbox, up to 98%.
5. Gear ratios 1:1, 1.5:1, 2:1, 3:1, 4:1 and 5:1, customized special gear ratio.
6. Input power from 0.05Kw to 157Kw. Drive torque from 11.56N.m to 1842N.m. Input and output speed from 50 to 1500Rpm (high speed gearbox, contact Jacton engineers).
7. 12mm to 60mm diameter input and output shaft, 8 types shaft arrangements and direction of shaft rotating. Shafts can be rotated in both forward and reverse direction. Clockwise and counter-clockwise rotation direction are available.
8. Soild shaft, hollow shaft and motor flange adapter are available.
9. horizontal mounting, overhung mounting or wall mounting are available.
10. 2 way gearbox, 3 way gearbox, 4 way gearbox are available.
11. low backlash 8 to 15 arcmin, quiet low noise less than 80dB under 1500rpm at 1 meter distance, low working temperature less than 50 degree centigrade.
12. application in printing press, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, satellite dish antennas, gate valve actuators, food processing, robotics, rubber processing, wrapping machine, solar panel, commercial mower, street sweeper, dual steering, bulkhead door opener, scissor lift, vertical pump drive, sand spreader, residential mower, car wash curtain, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader, business form press, feed screw drive, sewage conveyor, collating machinery, mixing equipment, conveyor drive, screw jack system, film processor and pottle packaging equipment. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to press, propel or raise, Jacton bevel gearbox is welcomed and ideal power transmission solution with all these industries.
gearbox power loss right angle gearbox, heavy duty miter gearbox 1:1 5/8 shaft, right angle bevel gear reducer iec input flange Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
ball screw jack,electric ball screw jack,manual ball screw jack,ball screw actuators,ball screw drive,ball screw lifts features:
1. Lifting force 5kN to 500kN. Under max. lifting force, input shaft required torque, high ratio 1.3Nm to 318Nm, low ratio 0.62Nm to 178Nm.
2. Ball screw diameter 16 mm to 100 mm, lead 5 mm to 24 mm.
3. Worm gear ratio 1/5 to 1/32.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. High speed, high precision, high efficiency, high duty cycle, high performance, high frequency operation, low drive torque, long service life.
6. motorized ball screw jack by 3-phase or single phase electric motor/gearmotor, manual ball screw jack by hand wheel/hand crank.
7. Ball screw ends include top plate, clevis end, plain end and threaded end.
8. Individually or multiple ball screw jack lifting system arrangements are available.
9. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
Note: ball screw without self-locking, braking motor, brake mechanism or other locking systems are required when keep the position. When a motorized ball screw jack, less power is required than an equivalent size machine screw jack.
worm gear screw jack,motorised worm gear screw jack,manual worm gear screw jack,worm drive screw jack features:
1. Maximum load capacity from 2.5 ton to 120 ton, maximum torque from 18 Nm to 3315 Nm.
2. Lift screw diameter 30 mm to 180 mm, screw pitch 6 mm to 25 mm.
3. Each jack has two gear ratio from 1/6 to 1/36.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounting orientation.
5. Precisely positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual screw jack by hand wheel or hand crank, motor screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1500 mm/min and 375 mm/min.
8. No standard lift screw stroke, maximum travel stroke 1500mm to 7000mm when tension load.
9. Top plate, clevis end, plain end and threaded end are available.
10. Individually or multiple worm gear screw jacks lifting system are available.
11. Application in steel, pipe, tube, plate, roll forming roller adjustment, feeder straightener rolls adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, coil sheet slitter line, paint coating line, cut to length line, tension levelling line, continuous galvanizing line, beverage production line, foam concrete cutting machine, sanding machine, heavy vehicles mobile lifting platform, bottle monitoring system height adjustment, conveyor adjustment, plate saw angle adjustment, spray infeed conveyor lift system, theatre stage lifting platform, solar tracker, satellite dish antenna azimuth, raising sluice gate, screw scissor lift table, synchronized lifting system, food processing lifting system, extrusion machine, cnc steel leveling machine, blow molding machine, curing oven lifts, bolted tank, steel shuttering concrete beams adjustment, vintage industrial crank desk, solar panel tracking system, railway maintenance lifting jack, damper adjustment, continuous casting, cnc cut to length machine, robotics arm raising, palletizer, extrusion machine, motorized self-raising tower system, angle tilt adjustments with double clevis, aircraft docking system, open and close flood gates, metallurgy industry, mining industry, chemical industry, construction industry and irrigation industry.
acme screw jack,acme screw actuator,acme screw drive,acme thread screw jack,worm gear lift manufacturer features:
1. Static load capacity maximum 100 ton, dynamic load capacity maximum 26 ton.
2. Lift screw diameter from 20 mm to 100 mm, screw pitch from 5 mm to 16 mm.
3. Each jack model has 3 worm gear ratios from 1/5 to 1/40.
4. Translating screw, rotating screw, keyed screw configurations in upright or inverted mounted orientation.
5. Accurate positioning, self-locking acme screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems.
6. Manual operated screw jack by hand wheel or hand crank, motorized screw jack by electric motor or gearmotor driven, or both.
7. 3-phase or single phase motor driven with 1500 rpm input, standard lifting speed 1500 mm/min, 750 mm/min and 375 mm/min.
8. No standard lift screw stroke, all lift screw travel length is processed according customers requirements. Under max. compression load, without guides, from 100 mm to 900 mm stroke, with guides from 200 mm to 1800 mm stroke. Under a tension load, from 700 mm to 4500 mm stroke.
9. Lift screw end fittings include top plate, clevis end, plain end and threaded end, standard or your design dimensions are available.
10. Individually or multi worm gear screw jacks system arrangements are available.
11. Compared with fast speed hydraulic cylinder and pneumatic cylinder, it is of easy installation, small sizes, easy operation and maintenance, precisely lifting, self-locking, synchronous speed, environmental protection, multiple units arrangements.
12. Applications in steel mills roller adjustment, pipe mills roller adjustment, tube mills roller adjustment, roll forming mills roller adjustment, plate mills roller adjustment, rolling mills rollers adjustment, powered feeder straightener rolls adjustment, roller system adjustment, adjusting synchronous coil feed lines rolls, precision roller leveler, cold roller adjustment, hot roller adjustment, coil handing, semi-finished product handling, brush adjustment belt cleaning, zinc pot lifting mechanism, air knife system adjustment, roll pass system, sizing stand and molten steel pot lifting system. Whatever you pushing, pulling, lifting, adjusting or aligning linear motions need, we will have a the most complete solution for you.
1996 polaris indy rxl snowmobile service repair manualfjjsjeusekkekm
This document provides publication numbers and service bulletin indexes for Polaris snowmobiles from 1994-1998. It lists the model, model number, owner's manual part number, parts manual part number, and other relevant documentation for each year. The document also provides indexes of service bulletins by number and year to allow technicians to quickly look up technical service information.
Distortion of Gears and Sliding Sleeves for Truck Gear Boxes – a Systematical...ALD Vacuum Systems Inc.
1. The study analyzes the distortion potential of gears and sliding sleeves subjected to different heat treatment concepts, including the conventional case hardening process and a new SyncroTherm® concept.
2. Key findings include the SyncroTherm® concept producing stable distortion characteristics even at elevated carburizing temperatures without pre-heating, as well as good performance from two-dimensional batch quenching compared to individual press quenching.
3. Processing cold formed blanks without annealing before machining was found to limit the ability to use the SyncroTherm® concept for distortion-sensitive sliding sleeves.
This document discusses the applications of gearboxes manufactured by APEX, the most productive helical planetary gearhead manufacturer in the world. It provides over 40 examples of the main types of APEX gearboxes used in CNC machines for industries like manufacturing, medical equipment, food processing, and more. The applications mentioned include CNC lathes, mills, robots, and machines for shoe lasts, printing, semiconductor wafer coating, and more.
water pump right angle gear box design,right angle gearbox speed reducer 1 to 1,50hp diesel T drive right angle gearbox 25mm input and output shaft Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
FMS Layout for Manufacturing of Marine GearsSomesh Saurabh
This is a complete presentation on Manufacturing and FMS layout for Marine Gears which are Helical, Spiral Bevel and Conical Bevel. It includes manufacturing, heat treatment process, FMS and testing also.
Design and Working of Differential GearSaran Kumar
The document summarizes the design and working of a differential gear. It describes how a differential gear allows the left and right drive wheels to rotate at different speeds while turning, transmitting power from the engine. It discusses the types of differentials including open, locking, and limited-slip differentials. It explains how an open differential works and how resistance is distributed between the wheels. It also provides diagrams to illustrate the internal components and functioning of different types of differentials.
FMEA is a systematic method for evaluating potential failures in a design, manufacturing or assembly process. It involves analyzing possible failures, identifying their causes and effects, and prioritizing issues based on severity, occurrence, and detection. The process results in a risk priority number to determine which failures should be addressed first. FMEA is widely used in industries like automotive, aerospace, healthcare to prevent failures and improve quality and safety.
Description of various types of clutches and gear boxes has been given in the following sections of this unit. The term ‘Transmission’ is used for a device which is located between clutch and propeller shaft. It may be a gear box, an over drive or a torque converter, etc.
For Video on Transmission System Click The Link Below:-
https://www.youtube.com/watch?v=_EPsdRP2nXI
Please Subscribe To Our YouTube Channel:-
http://www.youtube.com/user/TheEngineeringScienc?sub_confirmation=1
This document provides an overview of Failure Mode and Effects Analysis (FMEA). FMEA is a systematic method used to evaluate potential failure modes in a design, process or service and their causes and effects. It involves analyzing potential failures, their likelihood and severity, and identifying actions to address potential failures with high risk priority numbers. The document defines key terms in FMEA like severity, occurrence, detection and risk priority number. It also outlines the FMEA process, including steps to identify potential failure modes, effects, causes, current controls and priority actions.
Automotive gearboxes allow engines to operate at optimal speeds while providing different gear ratios to suit varying road and load conditions. They use helical and herringbone gears to smoothly and quietly change torque and speed. Common types include sliding mesh, constant mesh, and synchromesh gearboxes, as well as transaxles and sequential gearboxes. Automatic transmissions use planetary gears and hydraulics to seamlessly shift gears without driver input. This provides better fuel economy and driver experience but with lower mechanical efficiency than manual transmissions.
Selection of gearbox for epicyclic gear boxShekhar Kamthe
This presentation discusses epicyclic gear trains and their applications. It describes the basic components and operation of simple and compound epicyclic gear trains, including sun and planet gears. Methods for calculating velocity ratios in epicyclic gears are presented. Examples of specific epicyclic gear applications discussed include Humpage's speed reduction gear and the differential gear used in automobiles. The advantages of epicyclic gears over conventional gears are their smaller size, higher durability, and ability to achieve high transmission ratios. Their disadvantages include higher cost and more complex design.
ABOUT THE TRAINING PROGRAM :-
Failure Mode and Effects Analysis or FMEA is a structured technique to analyze a process to determine shortcomings and opportunities for improvement. By assessing the severity of a potential failure, the likelihood that the failure will occur, and the chance of detecting the failure, dozens or even hundreds of potential issues can be prioritized for improvement.
DESIGNED FOR :-
Sr. Engineer, Engineer, Supervisor and Foreman engaged in maintenance, operation, Store, Supply chain, Quality, Safety and Engineering activities.
OBJECTIVE :-
Employees completing this training will be able to effectively participate on an FMEA team and can make immediate contributions to quality and productivity improvement efforts.
lifting power of right angle drive boxes, right angle gearbox 1 inch shaft, 1:1 gear ration 2 cross gearboxes,30kW 25 mm shaft cross gearboxes Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
ratio 1:1 90 degree gearbox 2000 rpm,4 way bevel drive angular transmissions,sawmill three output 90deg gearboxes bevel, 5hp 1 to 1 ratio t drive gear box 1500 rpm Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
Right angle gearbox vertical, small 90 degree gearbox with 19 mm shafting, power transmission angle gears, gear box with 90degree output Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
2:1 gear increaser box,vertical to horizontal drive shaft gearbox, 90 deg mini bevel gear box, 2 to 1 gearbox, 2-way gearbox, right angle gearbox speed increaser Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
This document provides information on JTV series miter gearboxes produced by Jacton
Electromechanical Co.,Ltd. It includes specifications for 6 gearbox models ranging from 65mm to
260mm, details on configurations, selection guidelines, dimensions, applications, operation manuals
and frequently asked questions. The document contains technical specifications, diagrams, and
instructions for proper installation, use, maintenance and troubleshooting of Jacton miter gearboxes.
25mm shaft diameter 90 degree gearboxes 1:1 ratio,6 spline 25mm keyed shaft 1 to 1 ratio t box 90 degree gearbox, ratio 1-1 right angle 90deg gearbox top to horizontal suppliers, manufacturers
Distortion of Gears and Sliding Sleeves for Truck Gear Boxes – a Systematical...ALD Vacuum Systems Inc.
1. The study analyzes the distortion potential of gears and sliding sleeves subjected to different heat treatment concepts, including the conventional case hardening process and a new SyncroTherm® concept.
2. Key findings include the SyncroTherm® concept producing stable distortion characteristics even at elevated carburizing temperatures without pre-heating, as well as good performance from two-dimensional batch quenching compared to individual press quenching.
3. Processing cold formed blanks without annealing before machining was found to limit the ability to use the SyncroTherm® concept for distortion-sensitive sliding sleeves.
This document discusses the applications of gearboxes manufactured by APEX, the most productive helical planetary gearhead manufacturer in the world. It provides over 40 examples of the main types of APEX gearboxes used in CNC machines for industries like manufacturing, medical equipment, food processing, and more. The applications mentioned include CNC lathes, mills, robots, and machines for shoe lasts, printing, semiconductor wafer coating, and more.
water pump right angle gear box design,right angle gearbox speed reducer 1 to 1,50hp diesel T drive right angle gearbox 25mm input and output shaft Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
FMS Layout for Manufacturing of Marine GearsSomesh Saurabh
This is a complete presentation on Manufacturing and FMS layout for Marine Gears which are Helical, Spiral Bevel and Conical Bevel. It includes manufacturing, heat treatment process, FMS and testing also.
Design and Working of Differential GearSaran Kumar
The document summarizes the design and working of a differential gear. It describes how a differential gear allows the left and right drive wheels to rotate at different speeds while turning, transmitting power from the engine. It discusses the types of differentials including open, locking, and limited-slip differentials. It explains how an open differential works and how resistance is distributed between the wheels. It also provides diagrams to illustrate the internal components and functioning of different types of differentials.
FMEA is a systematic method for evaluating potential failures in a design, manufacturing or assembly process. It involves analyzing possible failures, identifying their causes and effects, and prioritizing issues based on severity, occurrence, and detection. The process results in a risk priority number to determine which failures should be addressed first. FMEA is widely used in industries like automotive, aerospace, healthcare to prevent failures and improve quality and safety.
Description of various types of clutches and gear boxes has been given in the following sections of this unit. The term ‘Transmission’ is used for a device which is located between clutch and propeller shaft. It may be a gear box, an over drive or a torque converter, etc.
For Video on Transmission System Click The Link Below:-
https://www.youtube.com/watch?v=_EPsdRP2nXI
Please Subscribe To Our YouTube Channel:-
http://www.youtube.com/user/TheEngineeringScienc?sub_confirmation=1
This document provides an overview of Failure Mode and Effects Analysis (FMEA). FMEA is a systematic method used to evaluate potential failure modes in a design, process or service and their causes and effects. It involves analyzing potential failures, their likelihood and severity, and identifying actions to address potential failures with high risk priority numbers. The document defines key terms in FMEA like severity, occurrence, detection and risk priority number. It also outlines the FMEA process, including steps to identify potential failure modes, effects, causes, current controls and priority actions.
Automotive gearboxes allow engines to operate at optimal speeds while providing different gear ratios to suit varying road and load conditions. They use helical and herringbone gears to smoothly and quietly change torque and speed. Common types include sliding mesh, constant mesh, and synchromesh gearboxes, as well as transaxles and sequential gearboxes. Automatic transmissions use planetary gears and hydraulics to seamlessly shift gears without driver input. This provides better fuel economy and driver experience but with lower mechanical efficiency than manual transmissions.
Selection of gearbox for epicyclic gear boxShekhar Kamthe
This presentation discusses epicyclic gear trains and their applications. It describes the basic components and operation of simple and compound epicyclic gear trains, including sun and planet gears. Methods for calculating velocity ratios in epicyclic gears are presented. Examples of specific epicyclic gear applications discussed include Humpage's speed reduction gear and the differential gear used in automobiles. The advantages of epicyclic gears over conventional gears are their smaller size, higher durability, and ability to achieve high transmission ratios. Their disadvantages include higher cost and more complex design.
ABOUT THE TRAINING PROGRAM :-
Failure Mode and Effects Analysis or FMEA is a structured technique to analyze a process to determine shortcomings and opportunities for improvement. By assessing the severity of a potential failure, the likelihood that the failure will occur, and the chance of detecting the failure, dozens or even hundreds of potential issues can be prioritized for improvement.
DESIGNED FOR :-
Sr. Engineer, Engineer, Supervisor and Foreman engaged in maintenance, operation, Store, Supply chain, Quality, Safety and Engineering activities.
OBJECTIVE :-
Employees completing this training will be able to effectively participate on an FMEA team and can make immediate contributions to quality and productivity improvement efforts.
lifting power of right angle drive boxes, right angle gearbox 1 inch shaft, 1:1 gear ration 2 cross gearboxes,30kW 25 mm shaft cross gearboxes Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
ratio 1:1 90 degree gearbox 2000 rpm,4 way bevel drive angular transmissions,sawmill three output 90deg gearboxes bevel, 5hp 1 to 1 ratio t drive gear box 1500 rpm Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
Right angle gearbox vertical, small 90 degree gearbox with 19 mm shafting, power transmission angle gears, gear box with 90degree output Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
2:1 gear increaser box,vertical to horizontal drive shaft gearbox, 90 deg mini bevel gear box, 2 to 1 gearbox, 2-way gearbox, right angle gearbox speed increaser Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
This document provides information on JTV series miter gearboxes produced by Jacton
Electromechanical Co.,Ltd. It includes specifications for 6 gearbox models ranging from 65mm to
260mm, details on configurations, selection guidelines, dimensions, applications, operation manuals
and frequently asked questions. The document contains technical specifications, diagrams, and
instructions for proper installation, use, maintenance and troubleshooting of Jacton miter gearboxes.
25mm shaft diameter 90 degree gearboxes 1:1 ratio,6 spline 25mm keyed shaft 1 to 1 ratio t box 90 degree gearbox, ratio 1-1 right angle 90deg gearbox top to horizontal suppliers, manufacturers
This document provides information on JTV series miter gearboxes produced by Jacton
Electromechanical Co.,Ltd. It includes specifications for 6 gearbox models ranging from 65mm to
260mm, selection guidelines, dimensions for each model, application examples, operation and
maintenance instructions, and frequently asked questions. The document contains detailed technical
data on configurations, specifications, gear ratios, mounting positions, and lubrication requirements.
gear reduction 90 degree box, light duty right angle gearbox, right angle three way gearbox, right angle gear boxes 1" shaft, light duty right angle gearbox Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
mitre 90 degree gearbox 1:1 ratio, gear boxs 90 degrees angle, small 90 degree gearbox 3/4" input shaft, 3/4 inch shaft gearbox, 1 inch shaft to transmission gearbox Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
1:2 ratio right angle bevel type gear reducer 30mm shaft diameter,right angle gear box with 12 mm output shaft, 1 to 2 ratio right angle bevel drives 4 output Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
36hp engine 2 way bevel gearbox 1500rpm,80hp trencher gearbox input and output 540 rpm,60 hp reducer gear box, 1:2 ratio speed increaser gearboxes Input power from 0.1 Kw to 157 Kw. Transmission torque from 10 Nm to 1840 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 12 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.
three shaft gear head box, small and inexpensive gearbox, high performance bevel gearboxes, ninety degrees bevel gearboxes, one input drive to two or three output drives gearbox suppliers, manufacturers
Similar to Speed reducer,gearbox bevel, two direction corss gearbox,gear box 90 degree 2 1 ratio,2 1 90 degree gear box,gear reducers 2 to 1 90 deg suppliers, manufacturers (20)
The document describes the JTW-Series machine screw jacks. Key points:
- The jacks use heat-treated steel and bronze gears to translate rotation into linear movement via an acme thread lifting screw. Ball bearings and seals support components.
- Configurations include types that translate, rotate the lifting nut, include anti-rotation/backlash features, and different lifting screw ends. Capacities range from 0.5 to 100 tons.
- JTW jacks are self-locking, precisely position loads, and do not require additional braking. They can be driven manually or by motor in various mounting positions.
- Applications include metalworking, mining, construction, and other industries
This document provides specifications for the JTV-series miter gearbox. The gearbox has a cubic, machined housing with average efficiencies of 95-98%. It can operate in both directions smoothly with low noise and vibration. Spiral bevel gears are made of hardened alloy steel and precision processed to provide rigidity and high precision transmission. The gearbox is available in various configurations with 1-4 shafts and maximum torques ranging from 19Nm to 1841Nm.
Jacton Industry Co., Ltd is a company that provides lifting systems solutions including screw jacks, miter gearboxes, and lifting systems. They can be contacted via their phone number, Skype, email, or website for inquiries about custom screw jacks, custom acme screws, or their JT-Series miter gearbox product line.
The JT-Series Acme Screw Jacks incorporate heat-treated steel and bronze gears to translate or rotate an acme threaded lifting screw, supporting loads without backdriving. They are available in sizes from 0.5 to 100 tons and various configurations, and can lift at speeds up to 3 m/min. JT-Series jacks are commonly used for controlled lifting, lowering, pushing and pulling in applications like steel mill roller adjustment. They are generally maintenance-free and accessories allow for electric, hand wheel, or combined motor operation.
The document describes the JTC-Series Cubic Screw Jack. It has a worm gear driven trapezoidal lead screw that incorporates a heat-treated steel worm and bronze worm gear. It uses ball bearings and seals to support components. The jack housing is made of ductile iron and comes in various configurations for different applications. It can provide lifting forces from 2.5 to 500 kN and linear speeds up to 1.5 m/min. Accessories include motors, wheels, and switches. It is used for applications requiring controlled lifting/lowering such as conveyors and stages.
The document describes JTB-Series Ball Screw Jacks, which use ball screws and ball nuts instead of machine screws to reduce torque requirements. They have worm gears that drive bronze gear sets and ball nuts to translate or rotate lifting ball screws. The ball screw design allows for smoother and more efficient lifting than machine screw jacks. JTB ball screw jacks are used where controlled lifting is required and can be installed as single units or in lifting systems. They come in various configurations for different applications.
we are professional 1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and actuators, 10 ton solar tracking drive jacks, 20 ton solar tracking drive actuators for solar panel tracker system in canada manufacturers and suppliers in China.
we are professional Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm for nc precision slitting production line automatic slitter machine in australia manufacturers and suppliers in China.
The document describes 3 ton worm gear screw jacks lifting devices that are 300mm in travel stroke and have a maximum load capacity of 3 tons. The screw jacks are hand wheel operated and are being offered for use in NC precision slitting production lines and automatic slitter machines in Australia. The screw jacks have a high gear ratio of 1/6 and include additional protective piping.
The document advertises lightweight micro-miniature screw jacks from 2.5kn to 10kn lifting force for aluminum can production lines in the UK. It provides details on 4 screw jack models ranging from 2.5kn to 10kn lifting force that are inverted type, have a traveling screw configuration, 100mm lift height, and protective tubing. The screw jacks and other products like gear boxes, couplings, motors, and accessories are suitable for applications that require height adjustment and lifting on conveyor lines.
Jacton Electromechanical Co. produces precision screw jacks and gear lifts for precision straighteners used in the USA. They offer inverted translating worm gear screw jacks in various tonnage ratings from 1 to 10 tons with stroke lengths from 80 to 300mm. These screw jacks feature customized threaded ends, double input shaft worms, and protective tubes to prevent rust. Jacton also produces other screw jack and gear products for industrial machinery.
we are professional 5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack for tunnel freezer top lid lifting in food processing lines in united kingdom manufacturers and suppliers in China.
we are professional Self locking jack screw driven scissor mechanism, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore manufacturers and suppliers in China.
The document discusses screw jack lifting systems for scissor lift tables. It describes how ball screw or acme screw jack lifting systems can provide self-locking, precise positioning, uniform lifting speed, synchronization, easy installation and maintenance for scissor lifts. It then provides details about a specific order from a Singapore customer for a screw jack scissor lift table with two screw jacks driven by a 3-phase motor.
we are professional 25kn load capacity machine screw jacks 300mm stroke for continuous pu panel production lines in thailand manufacturers and suppliers in China.
The document describes 25kn load capacity machine screw jacks with 300mm stroke that are used in continuous sandwich panel laminating machines for raising and lowering caterpillar plates. It provides details on two models, the JTW-2.5T-IS-300-H-III-C-PP and JTC25-IS-500-H-I-C-PP, which have load capacities of 2.5 tons and 25kN respectively. It also includes links to the company's website pages on various screw jack products and related parts.
The document discusses a theatre lifting stage jack system for a theatre in France. It includes specifications for a lifting platform that is 15000x10000mm carrying a total load of 2400kN. The system would include 6 screw jacks each with a load capacity of 400kN and 628mm of travel, along with 3 miter gearboxes to connect the screw jacks. An electric motor with a gear reducer is also specified to drive the screw jack system at a speed of 37.5mm/min. Parts for the system like screw jacks, couplings, linking bars, bearings, motors and gearboxes are also referenced.
5 Ton Machine Screw Jacks, 20 Ton Upright Translating Screw Jacks For Lift Different Rotors Of Horizontal Axis Balancing Machines In Russia
This balancing machine is a dynamic soft bearing machine with a horizontal axis.
It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
The machine can be mounted on a reinforced concrete basement or rigid table for better operating conditions. Self-installing rollers, ac frequency inverter, 5t or 20t screw jacks for for smooth and non-shock rotor stop.
20 Ton Upright Translating Screw Jacks
Model: JT-20T-US-350-L-I-C-N
* Static loading capacity max. 20t, spindle tr64x8
* Upright mounting, translating screw configuration
* Travel stroke 350 mm
* Low worm gear ratio 1/32, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
5 Ton Upright Translating Screw Jacks
Model: JT-5T-US-300-L-I-C-N
* Static loading capacity max. 5t, spindle tr38x6
* Upright mounting, translating screw configuration
* Travel stroke 300 mm
* Low worm gear ratio 1/24, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
Jacton Electromechanical Co.,Ltd produces 5 ton and 20 ton upright translating screw jacks for lifting different rotors on horizontal axis balancing machines in Russia. The balancing machine has an AC motor with variable speed that drives the machine through a belt system. It can be mounted on a concrete base or table. The screw jacks provide smooth, non-shock stopping of rotors and include features like travel stroke, worm gear ratio, and double input shafts. Other products include various screw jack models, gear boxes, hand wheels, motors, and accessories.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
Part 2 Deep Dive: Navigating the 2024 Slowdownjeffkluth1
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s DholeraAvirahi City Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Hamster Kombat' Telegram Game Surpasses 100 Million Players—Token Release Sch...
Speed reducer,gearbox bevel, two direction corss gearbox,gear box 90 degree 2 1 ratio,2 1 90 degree gear box,gear reducers 2 to 1 90 deg suppliers, manufacturers
1. JT Series Miter Gearbox
Jacton Electromechanical Co.,Ltd
1
http://www.screw-jack.com
2. Contents
General information ---------------------------------------------------------------------------- 3
Configurations ----------------------------------------------------------------------------------- 4
X-Shaft & Y-Shaft, Factors
* Direction of Rotation -------------------------------------------------------------------------------- 5
* Speed Reducer and Increaser --------------------------------------------------------------------- 5
* Driven Machine Factor------------------------------------------------------------------------------ 5
Specifications
* JT15, JT19, JT25, JT32 ---------------------------------------------------------------------------- 6
* JT40, JT45, JT50, JT60 ---------------------------------------------------------------------------- 7
* JT72, JT85------------------------------------------------------------------------------------------- 8
Selection Guide
1. Gearbox Series ------------------------------------------------------------------------------------ 9
2. Model ----------------------------------------------------------------------------------------------- 9
3. Gear Ratio ------------------------------------------------------------------------------------------ 9
4. Input & Output RPM ------------------------------------------------------------------------------- 9
5. Shaft Arrangements And Direction Of Shaft Rotating ------------------------------------------- 10-11
6. Mounting Position -----------------------------------------------------------------------------------11
Selection Examples ----------------------------------------------------------------------------- 12
Dimensions
* Model JT15 ------------------------------------------------------------------------------------------ 13
* Model JT19 ------------------------------------------------------------------------------------------ 14
* Model JT25 ------------------------------------------------------------------------------------------ 15
* Model JT32 ------------------------------------------------------------------------------------------ 16
* Model JT40 ------------------------------------------------------------------------------------------ 17
* Model JT45 ------------------------------------------------------------------------------------------ 18
* Model JT50 ------------------------------------------------------------------------------------------ 19
* Model JT60 ------------------------------------------------------------------------------------------ 20
* Model JT72 ------------------------------------------------------------------------------------------ 21
* Model JT85 ------------------------------------------------------------------------------------------ 22
Reversible Miter gearbox
* General Information--------------------------------------------------------------------------------- 23
* Shaft Arrangement Mode and Mounting Positions ----------------------------------------------- 23-24
* Dimensions ------------------------------------------------------------------------------------------ 24
Hollow Shaft and Flange Adapter ---------------------------------------------------------- 25
Application Examples -------------------------------------------------------------------------- 26
Operation Manual -------------------------------------------------------------------------------- 27-28
Frequently Asked Questions ----------------------------------------------------------------- 29
Company History --------------------------------------------------------------------------------- 30
Contact Us ------------------------------------------------------------------------------------------ 31
Jacton Electromechanical Co.,Ltd
2
http://www.screw-jack.com
3. General Information
Used in pairs spiral bevel gear unit to transmit rotary motion, mechanical power and torque where the
drive shafts are at 90 degree right angle to each other, transmission efficiency up to 98%. Design life
is 10000 hours.
Gearbox Features
* 10 gearboxes models JT15, JT19, JT25, JT32, JT40, JT45, JT50, JT60, JT72, JT85
* 6 reversible gearbox models JTT25, JTT32, JTT40, JTT45, JTT50, JTT60
* 42 types shaft arrangement mode & 6 types mounting positions
* Gear ratio 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1
* Power rating from 0.01Kw to 335kW
* Torque rating from 11.6 to 5713Nm
Shaft Configurations
* 2 way, 3 way and 4 way
* Solid shaft or hollow shaft
* Motor adapter to bolt an IEC motor
* 10,000 hours lifespan for all gearbox sizes
* Input speed up to 1500Rpm, customized maximum 3000Rpm
* Breather/vents available for high speed required
Advantages
* Gearbox with low backlash.
* Quiet running, when 1500Rpm, at 1meter distance, noise level less than 80dB
* Normal temperature, when 1500Rpm, temperature less than 50 deg. C
* Lubricants prior to shipment with oil
* All miter gearboxes are factory tested prior to shipment
* Detailed 2D CAD autocad drawing final confirmed before placing an order to us
* Small order quantities is acceptable
* Fast delivery time of standard models gearboxes, OEM & ODM are acceptable
Jacton Electromechanical Co.,Ltd
3
http://www.screw-jack.com
4. Configurations
JT series miter gearbox configuration includes precision spiral bevel gear, input shaft, output shaft,
covers, housing, oil seal, bearing, hex. Screw, key, snag ring and paper shim.
Precision Spiral Bevel Gear
1. High purity rugged alloy steel 20CrMnTiH material
2. Carburizing process, case hardened and lapped in pairs for intersecting shafts
3. Low noise with grinded spiral teeth
4. High torque with milled teeth
5. High rigidity and wear risistance
Input and Output Shaft
1. Hardened and tempered alloy steel 40Cr or C45 material
2. Hanging heavy load capacity
3. With key and keyway
4. Customized stainless steel, chromium coated or other corrosion resistance painting
5. Customized spline shaft, shaft without key and keyway
Housing
1. High rigidity cast iron
2. Customized stainless steel, galvanic coating or other corrosion resistance painting
Bearing
1. Heavy duty tapered roller bearing
2. Customized reinforced bearings for higher radial and axial load
Oil Seal
1. Double lip oil seal, prevent gear oil leak and dustproof
Jacton Electromechanical Co.,Ltd
4
http://www.screw-jack.com
5. X-Shaft & Y-Shaft, Factors
Direction of Rotation
Speed Reducer and Increaser
Driven Machine Factor
Factors of driven machines
Uniform Load: generators, conveyor belts, apron conveyor, screw conveyors, ventilators, agitators
and mixers for uniform densities, filling and packing stations, gear wheel pumps, feed servos of
machine tools.
Moderate Load: Lifts, swing gear on cranes, pit ventilators, agitators and mixers for un-equal
densities, piston pumps, timber processing machines, paper processing machines, winches, auxiliary
drives in ships, textile machines.
Heavy Load: Punches, shears, rolling and smelting machines, heavy-duty centrifuges, heavy-duty
supply pumps, edge runners, vibrating machines, cutting machines, brickworks machines,
heavy-duty lifts.
Jacton Electromechanical Co.,Ltd
5
http://www.screw-jack.com
10. 6. Shaft Arrangements And Direction Of Shaft Rotating
There are 42 type shaft arrangements and direction of shaft rotating for customers selection, please check below
I-LR(O) series, I-UD(O) series, U-LR(O) series, D-LR(O) series, I-I-LR(O) series, I-I-UD(O) series, U-D-LR(O)
series shaft arrangements and direction of shaft rotating.
Note: Drive shafts can be rotated in both forward and reverse direction.
I-LR(O) Series: I-LR, I-LR-O, I-L, I-L-O, I-R, I-R-O shaft arrangements and direction of shaft rotating.
I-UD(O) Series: I-UD, I-UD-O, I-U, I-U-O, I-D, I-D-O shaft arrangements and direction of shaft rotating.
U-LR(O) Series: U-LR, U-LR-O, U-L, U-L-O, U-R, U-R-O shaft arrangements and direction of shaft rotating.
D-LR(O) Series: D-LR, D-LR-O, D-L, D-L-O, D-R, D-R-O shaft arrangements and direction of shaft rotating.
I-I-LR(O) Series: I-I-LR, I-I-LR-O, I-I-L, I-I-L-O, I-I-R, I-I-R-O shaft arrangements and direction of shaft rotating.
I-I-UD(O) Series: I-I-UD, I-I-UD-O, I-I-U, I-I-U-O, I-I-D, I-I-D-O shaft arrangements and direction of shaft rotating.
U-D-LR(O) Series: U-D-LR, U-D-LR-O, U-D-R, U-D-R-O, U-D-L, U-D-L-O shaft arrangements and direction of
shaft rotating.
Jacton Electromechanical Co.,Ltd
10
http://www.screw-jack.com
11. 7. Mounting Position
B3: Horizontal Mounting Position
B4: Over Hung Mounting Position
B5: Side Wall Mounting Postion
Jacton Electromechanical Co.,Ltd
11
http://www.screw-jack.com
12. Selection Examples
Load characteristics of each gearbox 196Nm, moderate load, working 8 hours/day continuously:
i.e: driven machine factor f1=1.25, input speed=300Rpm, ratio i=1:1
Calculated with the following formula, the torque required by each gearbox is
Each gearbox required torque=196 x 1.25=245Nm
No.1 Gearbox:
No.1 gearbox carries its own torque of 245Nm and at the same time transmit torques to No.2 and
No.3 gearboxes, so the total load is 245Nm+245Nm+245Nm=735Nm
Check above 8th page specifications, JT50 gearbox is selected
No.2 Gearbox:
Besides its own torque, No.2 gearbox has to transmit torque to No.3 gearbox, so the total load is:
245Nm+245Nm=490Nm
Check above 8th page specifications, JT45 gearbox is selected
No.3 Gearbox:
As only load C exists, torque large than 245Nm is acceptable.
Check above 8th page specifications, JT40 gearbox is selected
Notes:
1. When i≠1, please make a choice of the input shaft. When X shaft acts as the input shaft, the
machine is a gear reducer. When Y shaft acts as the input shaft, it is an gear inceaser. The positions
of the two shafts can not be changed once the mounting positions and dimensions are fixed.
2. When several gearboxes are connected for output, load capacity of the line shafting should be
checked.
Jacton Electromechanical Co.,Ltd
12
http://www.screw-jack.com
23. Reversible Miter gearbox
General Information
Standard JTT25, JTT32, JTT40, JTT45, JTT50, JTT60 models reversible miter gearbox which are used
in transversal, clutch and change direction. Input shaft rotation direction remains unchanged, forward
rotation, reverse rotation or no rotation for output shaft rotation direction selection. There are single ouput
shaft, double output shaft, when double output shafts, one output shaft no roration and another rotation
adjustable, double output shafts stop or rotation together adjustable, the double output shafts rotation
direction can be the same or opposite. Normally, gear ratio 1:1, for other gear ratios, please contact our
engineers.
Shaft Arrangement Mode and Mounting Positions
Jacton Electromechanical Co.,Ltd
23
http://www.screw-jack.com
25. Hollow Shaft and Flange Adapter
If you need JT series miter gearbox with hollow input or output shaft, input or output flange adapter or
involute spline, please contact Jacton directly.
Jacton Electromechanical Co.,Ltd
25
http://www.screw-jack.com
26. Application Examples
JT series miter gearbox is also widely application in printing press, plastic extruder, sewage auger,
bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment,
material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging,
satellite dish antennas, gate valve actuators, business form press, feed screw drive, sewage
conveyor, collating machinery, mixing equipment, conveyor drive, film processor and pottle
packaging equipment. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to
press, propel or raise, JT series miter gearbox is welcomed and ideal power transmission solution
with all these industries.
Jacton Electromechanical Co.,Ltd
26
http://www.screw-jack.com
27. Operation Manual
Please read this entire document prior to operating the miter gearbox. Miter gearbox failure or injury
to operators may be caused by improper installation, operation or maintenance.
Installation
Miter gearboxes must be mounted on a rigid, structurally sound baseplate. Ensure that miter gearbox
mounting pads rest evenly on the baseplate. The use of shims may be required to avoid housing
distortion which could alter the gear mesh or cause premature bearing failure.
The miter gearbox may be driven by direct coupling, flexible coupling, or V-belt drive. Couplers
should require only a light force to install. The driveline must be accurately aligned within the
equipment manufacturer's requirements to limit operating loads and minimize thrust loads on the
miter gearbox shaft. V-belt drives must be mounted close to the housing to minimize excessive
overhung loading which could result in early bearing or shaft failures. Sheaves must fit correctly. At
installation, a tight forced fit could move the shaft from its normal position and cause internal damage.
A loose fit could induce excessive vibration during operation and cause shaft damage or breakage.
Warning
When mounting the miter gearbox, the buyer is responsible to properly determine the quality or grade
of fastener, thread engagement, load carrying capacity, and torque requirements.
Warning
The buyer is responsible to provide protective shields over all external rotating parts, couplers, or
shaft extensions mounted on or with the miter gearbox. Protective clothing must be worn when
installing or maintaining the miter gearbox and operating system.
Initial operation should be carried out under no-load conditions. Before applying power to the miter
gearbox installation, review the following:
1. Check tightness of mounting bolts.
2. Check for proper oil level in miter gearbox.
3. Be certain that tools, debris, etc., are clear from rotating parts.
4. Rotate shafts by hand. If they do not rotate freely, check for uneven mounting, coupling
misalignment or excessive belt tension.
If all tests are satisfactory, make connections to shafts, ensure that all safety devices are in place,
and begin operation.
Lubrication
All miter gearboxes are factory tested prior to shipment. They include the correct amount of oil unless
specified by the customer to be shipped dry. Shaft bearings are splash lubricated and partially
submerged in oil when the miter gearbox is mounted horizontally. After installation, remove the
dipstick and verify correct oil level. If no dipstick is provided, determine level by any appropriate
method. In general, the oil level should be approximately half the depth of the miter gearbox (to the
parting line) for horizontal mounting, or to the shaft centerlines, if mounted other than horizontally.
Caution
Prior to operation, make sure the miter gearbox contains the correct amount of oil. If under-filled or
over-filled, damage to the miter gearbox or injury to personnel may result.
Jacton Electromechanical Co.,Ltd
27
http://www.screw-jack.com
28. Approved Lubricants:
For miter gearboxs operating in an ambient temp of –20 Deg. C and +85 Deg. C
JT series miter gearbox lubricant using liquid gear oil.
When low speed less than 100Rpm, optional grease lubricant
Caution
Donot combine synthetic with non-synthetic oils in the miter gearbox.
Maintenance
Warning
Disconnect power prior to any maintenance and do not bypass or inactivate any safety or protective
device. Lock out and tag the power supply to prevent unexpected application of power.
Routinely inspect mounting bolts, couplers,or other power transmitting devices to ensure all parts are
firmly anchored.Keep shafts and vent plugs (when included) clean to prevent foreign particles from
entering seals or housing. Inspect daily for any oil leaks and any unusual noises. Inspect weekly for
end play in shafts. Inspect belt drive tension after the first ten hours of operation and periodically
thereafter.
Check the oil level every 24 hours of operation. In the beginning to change the oil when the miter
gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will vary
for each particular installation depending on the severity of the environment. Normal changes should
occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service will be
realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high input
speeds, contact Jacton engineers.
Warning
Donot change or add oil while the miter gearbox is running. Damage to the miter gearbox or injury to
personnel may result. The miter gearbox housing, oil, plugs, and associated components may reach
high temperatures and cause severe burns. Use extreme care when servicing the miter gearbox.
Trouble Shooting
Jacton Electromechanical Co.,Ltd
28
http://www.screw-jack.com
29. Frequently Asked Questions
How Do I Know Which Shaft Of Miter gearbox Is As Input Shaft?
When using a 1:1 ratio gearbox ,it does not matter which shaft is used as the input shaft. Please
check 5th page, normally, X-shaft is input shaft, Y-shaft is output shaft. For other reduction gear ratios
input shaft is same as 1:1 ratio gearbox, but for increasing gear ratios input shaft, which is Y-shaft is
th
input shaft, X-shaft is output shaft, also check 5 page.
Can I Use Miter gearbox As Speed Increaser?
All miter gearbox can be used as speed increaser, by inputting on the output side of the gearbox,
however it is important to check whether the miter gearbox can handle the power and speed. When
using as an increaser, the input speed does not exceed the specifications recommended maximum
speed. Special gearbox is available where the pinion can be put on the through shaft so that two
output shaft increase the speed.
Are Miter gearboxes Supplied Filled With Gear Oil?
Yes, all miter gearboxes are filled gear oil prior to shipment, customers can install them and use them
directly. Note: for low speed applications (100 rpm input speed and below) miter gearboxes may be
recommended to have grease lubrication.
How Often Should I Change Gear Oil In The Miter gearbox?
Check the gear oil level every 24 hours of operation. In the beginning to change the gear oil when the
miter gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will
vary for each particular installation depending on the severity of the environment. Normal changes
should occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service
will be realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high
input speeds, contact Jacton engineers.
How Transmission Efficiency Of Miter gearbox?
The miter gearbox transmission efficiency up to 98%
Jacton Electromechanical Co.,Ltd
29
http://www.screw-jack.com
30. Company History
In 1997, Established Jacton Hardware Fabrication Plant, mainly processing kinds of hardware
following customers requirements. Occupied 500 square meters.
In 2000, Established domestic sales department, started to develop local market, mainly processing
gear transmission parts such as worm and worm gear, acme threads screw, square threads screw
and acme lead screw nut. Meanwhile, sales also sell straight bevel gear and spiral bevel gears for
customers.
In 2002, According to some regular customers of steel plants and machines manufacturers, which
used Taiwan screw jacks and miter gearboxes, due to long delivery and high price, would affect the
normal operations. Jacton Hardware Fabrication Plant started to processing JT acme screw jack and
JT miter gearbox following above customers samples.
In 2003, Established engineering department, research and development others models of JT acme
screw jack and JT miter gearbox, and draw some factory production drawings and local sales'
customers drawing with 2d autocad software.
In 2005, According to local market demands, Jacton Hardware Fabrication Plant is committed to
research and development JB/T8809-1998 standard JTW worm screw jack, JTM machine screw
jack, JTB ball screw jack and JTP cubic body miter gearbox.
In 2006, Because of local markets fiercely competitive. Established Hongkong office-Jacton
International Limited with own US dollars and EURO account. Established international sales
department, focused on overseas markets. Meanwhile, "JACTON" as company only brand.
In 2008, According to intl sales market report, cubic body screw jacks and another type cubic body
miter gearboxes are very popular in Europe and America markets. After managements meetings, we
started to develop JTC cubic screw jack, JTS high speed bevel gear jack, JTV cubic body miter
gearbox and JTA corrosion resistance aluminium body miter gearbox.
In 2009, Jacton Hardware Fabrication Plant extension, occupied 5000 square meters. Company
improves the processes and products through technology investment, brings in advanced
technology, production and testing equipment.
In 2010, Jacton Hardware Fabrication Plant Passed ISO9001:2008 quality management system, we
are strictly implement the work flow of ISO9001:2008 certifications, which ensures oversea and local
customers are satisfaction with our screw jacks and miter gearboxes and fast delivery time.
In 2012, In order to facilitating management, according to management decisions, sales department
and design department moved to Taibao business building. Meanwhile, Jacton Hardware Fabrication
Plant changed to be Dongguan Jacton Electromechanical Co.,Ltd.
Jacton Electromechanical Co.,Ltd
30
http://www.screw-jack.com
31. Contact Us
Jacton Electromechanical Co.,Ltd
Jacton Electromechanical Co.,Ltd
(Head Quarters)
(Sales Dept. & Design Dept.)
1&2 Floors, Building F, Baisheng Industrial
1118, Taibao Business Building, No.1
Areas,
Langwei Rd, Xinan, Changan, Dongguan,
No.34,
Yongjun
Road,
Datang,
Dalingshan, Dongguan, Guangdong, China
Guangdong, China
Phone: 86 769 81585810
Phone: 86 769 81585852
Mobile: 86 189 25569548
Fax:
Jacton International Limited
Contact Us
(Hong Kong Branch)
General Enquiries: sales@screw-jack.com
86 769 81620195
jactonjack@gmail.com
Office 17,9/F.,Tower A,New Mandarin
Online Skype:
jactonjack (Warren)
Tsimshatsui,Kowloon,Hongkong
Online Skype:
jactongearbox (Abby)
Tel: 852-2793-5511
Website:
http://www.screw-jack.com
Fax:852-3590-2333
Urgently required, please directly make a call
Plaza,No.14,Science
Museum
Road,
to Warren +86 13532830851
Jacton Electromechanical Co.,Ltd
31
http://www.screw-jack.com