Innovation health check nl versie 2018 othOlaf ter Haar
Werken aan uw innovatievermogen. Presentatie met diverse links voor meer informatie. Vergelijk uw bedrijfsprocessen met die van uw Europese MKB concurrentie en zie waar er ruimte is voor verbetering en hoe u de voorsprong kunt behouden en uitbouwen. Adviseurs van de Kamer van Koophandel begeleiden u gratis in dit proces en brengen hun expertise, kennis en netwerk in om uw innovatieproces te versnellen.
Robotisering biedt veel kansen voor de industrie. Om succesvol te robotiseren zijn er belangrijke aandachtspunten. Het HAN Lean-QRM Centrum/Lectoraat Lean heeft samen met Hogeschool Windesheim, Saxion Hogeschool en FieldLab Industriële Robotica, FIR, een onderzoeksproject uitgevoerd. Hierbij werd gekeken naar de ervaringen van het mkb bij robotisering. Bij het onderzoek zijn 4 maakbedrijven betrokken.
In deze masterclass bespraken onderzoekers, Vincent Wiegel van de Hogeschool van Arnhem en Nijmegen en Aart Schoonderbeek van Hogeschool Windesheim de uitkomsten van een onderzoek naar uitdagingen en succesfactoren bij robotiseren.
Innovation health check nl versie 2018 othOlaf ter Haar
Werken aan uw innovatievermogen. Presentatie met diverse links voor meer informatie. Vergelijk uw bedrijfsprocessen met die van uw Europese MKB concurrentie en zie waar er ruimte is voor verbetering en hoe u de voorsprong kunt behouden en uitbouwen. Adviseurs van de Kamer van Koophandel begeleiden u gratis in dit proces en brengen hun expertise, kennis en netwerk in om uw innovatieproces te versnellen.
Robotisering biedt veel kansen voor de industrie. Om succesvol te robotiseren zijn er belangrijke aandachtspunten. Het HAN Lean-QRM Centrum/Lectoraat Lean heeft samen met Hogeschool Windesheim, Saxion Hogeschool en FieldLab Industriële Robotica, FIR, een onderzoeksproject uitgevoerd. Hierbij werd gekeken naar de ervaringen van het mkb bij robotisering. Bij het onderzoek zijn 4 maakbedrijven betrokken.
In deze masterclass bespraken onderzoekers, Vincent Wiegel van de Hogeschool van Arnhem en Nijmegen en Aart Schoonderbeek van Hogeschool Windesheim de uitkomsten van een onderzoek naar uitdagingen en succesfactoren bij robotiseren.
Voorstelling van de West-Vlaamse Fabriek voor de Toekomst “Mechanica & Mechatronica” en het eerste initiatief “Competentiecentrum Mechatronica & Machinebouw”
Presentation on how the Innovation funnel was introduced in Televic through a creative campagn. Presented at Vlerick, in the series Creativity Talks on Feb 21, 2007
Presentation on how the Innovation funnel was introduced in Televic through a creative campagn. Presented at Vlerick, in the series Creativity Talks on Feb 21, 2007
This document discusses training a machine learning model for embedded inference. It covers choosing a framework (TensorFlow Lite), hardware (Raspberry Pi PICO), and model (MobileNetV2). It then discusses training the model on a custom image dataset, compressing the model using quantization and pruning techniques, and evaluating the compressed model's accuracy and size. The goal is to optimize the model for fast and efficient inference on resource-constrained embedded hardware.
The document discusses Pattyn Group's data collection and analysis solutions for product quality control and equipment performance optimization. It describes Pattyn 360, which includes on-premise and cloud-based options for collecting machine data, storing it locally or in the cloud, and providing data export, dashboards, and analysis. The solutions help customers control production processes, improve product quality, and maximize equipment availability through remote support, predictive maintenance, and using historical data for continuous improvement. Pattyn aims to provide the right information at the right time to customers through an online portal and is running pilot projects to develop their solutions and business model further.
More Related Content
Similar to Sirris manufacturing day 2013 KU Leuven - Bert Lauwers
Voorstelling van de West-Vlaamse Fabriek voor de Toekomst “Mechanica & Mechatronica” en het eerste initiatief “Competentiecentrum Mechatronica & Machinebouw”
Presentation on how the Innovation funnel was introduced in Televic through a creative campagn. Presented at Vlerick, in the series Creativity Talks on Feb 21, 2007
Presentation on how the Innovation funnel was introduced in Televic through a creative campagn. Presented at Vlerick, in the series Creativity Talks on Feb 21, 2007
This document discusses training a machine learning model for embedded inference. It covers choosing a framework (TensorFlow Lite), hardware (Raspberry Pi PICO), and model (MobileNetV2). It then discusses training the model on a custom image dataset, compressing the model using quantization and pruning techniques, and evaluating the compressed model's accuracy and size. The goal is to optimize the model for fast and efficient inference on resource-constrained embedded hardware.
The document discusses Pattyn Group's data collection and analysis solutions for product quality control and equipment performance optimization. It describes Pattyn 360, which includes on-premise and cloud-based options for collecting machine data, storing it locally or in the cloud, and providing data export, dashboards, and analysis. The solutions help customers control production processes, improve product quality, and maximize equipment availability through remote support, predictive maintenance, and using historical data for continuous improvement. Pattyn aims to provide the right information at the right time to customers through an online portal and is running pilot projects to develop their solutions and business model further.
2021 01-27 - webinar - Corrosie van 3D geprinte onderdelenSirris
Gebruikt u als bedrijf 3D-geprinte onderdelen of wilt u deze gebruiken? Dit webinar informeert u over de specifieke problematiek van corrosie die bij 3D-geprinte onderdelen kan optreden en licht de mogelijkheden tot deelname aan een onderzoeksproject hierrond toe.
2021/0/15 - Solarwinds supply chain attack: why we should take it sereouslySirris
In this webinar we explain why the SolarWinds attack is different from all known scenarios and how to protect your company or manufacturing site from it. Act fast, be aware!
The document provides an overview of the additive manufacturing (AM) process for metal parts. It discusses selecting an AM technology and material, designing the part, setting up the job configuration, running the print, and performing quality checks. Key steps include choosing SLM, LMD, or WAAM based on the application; selecting a metal powder or wire material; optimizing the part design for the chosen technology; setting laser power and scan speed parameters to achieve the desired density and properties; and conducting inspections before and after any post-processing such as heat treatment.
Challenges and solutions for improved durability of materials - Opin summary ...Sirris
The document provides an agenda for a meeting on challenges and solutions for improved durability of materials. The agenda includes talks on adhesively bonded joints for the maritime industry, corrosion monitoring, coatings for steel structures and heat exchangers, and corrosion of reinforced concrete. It also describes the OPIN project which is a 3-year, 2.6 million Euro collaboration between 7 partners across Europe to encourage cross-sectoral and cross-regional collaboration for offshore renewable energy SMEs through activities like workshops, technology assessments, and collaborative innovation groups.
Challenges and solutions for improved durability of materials - Hybrid joints...Sirris
This webinar discussed challenges and solutions for improving the durability of adhesive bonds in maritime transport. Adhesively bonded composite-metal joints can reduce ship weight and fuel consumption while increasing stability, but their use is limited due to lack of knowledge about long-term performance in harsh marine environments. The QUALIFY project aims to enable certification of hybrid joints for primary ship structures through testing, simulations, inspection techniques, and guidelines to predict joint performance over 25 years and allow for widespread use in shipbuilding by 2025.
Challenges and solutions for improved durability of materials - Corrosion mon...Sirris
Corrosion monitoring is important for the offshore renewable energy (ORE) sector due to the technical and economic consequences of corrosion. Current corrosion monitoring methods include corrosion coupons, ER probes, and environmental sensors for oxygen, pH, and temperature. However, these methods have limitations like needing retrieval, providing only historic data, and requiring frequent recalibration. New sensor technologies are needed for improved pitting monitoring, mudline corrosion inspection, and microbially influenced corrosion monitoring. Effective monitoring strategies combine direct corrosion monitoring with environmental data and inspections to reduce uncertainty and support corrosion risk-based inspection planning.
Challenges and solutions for improved durability of materials - Concrete in m...Sirris
The document discusses challenges and solutions for improving the durability of materials, specifically reinforced concrete in marine environments. It covers monitoring and modeling of reinforced concrete durability, costs of maintenance in complex marine environments, technologies like structural health monitoring (SHM) that can optimize maintenance, and challenges like fatigue, chloride ingress, and spatial variability that require further progress. The document provides examples of applications of SHM to grouted joints in offshore wind turbines and monitoring of stresses and chlorides in concrete structures.
Challenges and solutions for improved durability of materials - Coatings done...Sirris
This webinar discussed challenges and solutions for improving durability of materials for shell & tube heat exchanger coatings. It provided an overview of Donelli Alexo and Säkaphen coating companies and their facilities. It then reviewed the ISO 12944 standard for selecting coating systems based on identifying the corrosivity category of the operating environment and desired durability timeframe. Specific coating system examples were given for carbon steel in different corrosivity categories. The webinar also discussed fouling issues in heat exchangers and how coatings can help reduce fouling and its negative impacts on performance. Real-world case studies demonstrated significant fouling reduction from coatings. The webinar closed by considering topics for future discussion
Futureproof by sirris- product of the futureSirris
1) The document discusses how value can be created through smart products using sensors, connectivity, and digital services.
2) It outlines common smart product design areas like business models, mechatronics, and digital services that can enable new competitive advantages.
3) The author argues that companies should apply validated inspiration from proven smart product scenarios, build expertise in proof of concepts, and scale up knowledge through an ecosystem network to successfully create value with smart products.
Slotevent 'Verbinden van ongelijksoortige materialen' - Overzicht van recente innovatis in verbinden van ongelijksoortige materialen en van minder gekende las- en/of soldeertechnieken
Masterclass Mechatronics 4.0 - Indoor and outdoor localisation and positionin...
Sirris manufacturing day 2013 KU Leuven - Bert Lauwers
1. Manufacturing Day 2013
Building the factories of the future !
Interactieve Keynote
“De allernieuwste productietechnologieën tot in uw bedrijf”
Prof. Dr. Ir. Bert LAUWERS
Onderzoeksgroep “Advanced Manufacturing”,
Departement Werktuigkunde
Voorzitter W&T KU Leuven | Campus De Nayer & Geel
2. Inleiding
• Nieuwe productietechnologieën ?
Made in Belgium ?
Made Different ?
Nood aan nieuwe
productietechnologieën !?
• Investering in nieuwe productietechnologieën
Om efficiënter binnen het
bestaande marktsegment te
opereren
Om nieuwe
marktsegmenten/producten
aan te bieden
3. Inleiding
• Uw kennis i.v.m. nieuwe productietechnologieën ?
o
o
o
o
o
o
Technische vakbladen ?
Technische/Wetenschappelijke conferenties ?
Verkopers ?
Internet (bv. Techniline,..) ?
Beurzen (bv. EMO) ?
…
• Voorbeelden
o
o
ELID-slijpen
Draaien met hoge drukkoeling (∼200 bar)
4. Inleiding
• Is er een verschil in implementatie van nieuwe
productietechnologieën tussen bijvoorbeeld
Vlaanderen (België) ↔ andere landen (Duitsland, Nederland,…)?
o
o
o
o
Cultuur ?
Opleiding ?
Innovatiemogelijkheden ?
Ondersteunende R&D centra ?
5. Inhoud
• Inleiding
• AO-project
“Doorbraaktechnologieën voor de Vlaamse maakindustrie”
o
o
Doelstelling & Aanpak
Resultaten (state-of-the-art, sensibilisering, bevraging,..)
• “Building the factory of the future” met nieuwe
productietechnologieën ?
o
o
Hoe ?
Discussiegroep
• Besluit
6. Inhoud
• Inleiding
• AO-project
“Doorbraaktechnologieën voor de Vlaamse maakindustrie”
o
o
Doelstelling & Aanpak
Resultaten (state-of-the-art, sensibilisering, bevraging,..)
• “Building the factory of the future” met nieuwe
productietechnologieën ?
o
o
Hoe ?
Discussiegroep
• Besluit
7. Doelstelling & aanpak (1)
• Lopend onderzoeksproject in het
kader van Vlaanderen in Actie
en met steun van Agentschap Ondernemen
• Partners
• Kadert eveneens in het programma
www.madedifferent.be
8. Doelstelling & aanpak (2)
• Doelstelling
o
Opstellen van een visie waarmee Vlaamse bedrijven/organisaties
een belangrijke transformatie op het gebied van World Class
Productiemiddelen kunnen initiëren
• Aanpak
o
Opstellen state-of-the-art studies
• Toekennen van TRL (Technology Readiness Level) voor
verschillende technologieën
o
Inschatting van de marktimplementatie ?
• Toekennen van MRL (Market Readiness Level) voor verschillende
technologieën
o
o
Selectie van technologieën met (groot) potentieel voor de
Vlaamse maakindustrie
Formulering van actieplan (visie)
10. Inhoud
• Inleiding
• AO-project
“Doorbraaktechnologieën voor de Vlaamse maakindustrie”
o
o
Doelstelling & Aanpak
Resultaten (state-of-the-art, sensibilisering, bevraging,..)
• “Building the factory of the future” met nieuwe
productietechnologieën ?
o
o
Hoe ?
Discussiegroep
• Besluit
11. State-of-the-art
• Opstellen van state-of-the-art “infofiches”
op basis van
o
o
o
Literatuur, conferenties,
netwerking (bv. CIRP, Euspen,..)
Roadmaps (EU, Agoria/Sirris,…)
….
13. Toekennen van TRL niveau
TRL
Technology is successfully
deployed in industry
9
Draaien, frezen
Slijpen, Gieten,…
8
7
6
5
Technology validated in
laboratory environment
4
ELID-slijpen
3
2
Basic principles
1
Hybride proces
Draadvonken + Slijpen
14. Andere voorbeelden
• Additieve technieken voor
keramische materialen (TRL ∼ 4)
• Additieve technieken voor multimaterialen (TRL ∼ 4)
• Harddraaien (TRL ∼ 9)
• Multi-assig frezen (TRL ∼ 9)
• High pressure jet assisted
machining (TRL ∼ 7…8)
15. Belangrijke evoluties
• Nieuwe ontwikkelingen
o
Additieve technieken
• Groter materialenpallet, bio-manufacturing,…
o
Niet conventionele technieken
• ECM, laser,…
o
Hybride processen
• The “1+1=3” effect !
Laserondersteund bewerken
Trillingsondersteund boren
Neugebauer, R., Stoll, A., Ultrasonic application in drilling, Journal of Materials
Processing Technology 149 (2004) 633–639
16. Belangrijke evoluties
1mm
• Micro-manufacturing
• Moeilijk te bewerken
•
•
•
•
•
materialen/legeringen
Precisietechnieken
Assemblage van multi-materialen
Oppervlaktetechnieken (texturing)
Fabricage van geïntegreerde producten
…..
Microlager
http://www.appropedia.org/Laser_surface_texturing
17. Sensibilisering
• Publicatie van technologieën
(met lage TRL) via Made
Different Web-site
o
o
o
http://www.madedifferent.be/laser
ondersteuning-maakt-frezen-vangeavanceerde-materialeneconomisch-mogelijk
http://www.madedifferent.be/bew
erken-en-coaten-in-een-stapmet-cut-and-coat-wire-edm
….
19. Zijn technologieën bekend ? - Bevraging
• Oplijsting van geselecteerde technieken (50…60)
ingedeeld per groep
o
o
o
o
o
Afnemend
Additief
Assemblageprocessen
Omvormende technieken
Hybride processen
(1) Niet bekend
(2) Niet bekend, maar mogelijk interessant
(3) Bekend, maar niet geïmplementeerd
(4) Geïmplementeerd
20. 0
Abrasief waterjet draaien
Lasersnijden 3D-vormen
Lasertextureren
Lasercaving
Plasmapolijsten
Laserboren
Laserpolijsten
EBM
Elektrochemisch bewerken (complexe…
Precisie elektrochemisch bewerken
ELID-slijpen
Draadvonken met waterstraalsnijden
Laserablatie met micro-EDM
Vonkfrezen met ronddraaiende elektrodes
Micro-EDM met microfrezen
Compleetbewerken
Cryogeen koelen bij harde staalsoorten
Harddraaien
Hardfrezen
Simultaan 5-assig frezen
Resultaten
ELID slijpen
ECM
Afnemend - globaal - %
80
Lasertextureren
70
60
50
40
30
20
(1) Niet bekend
10
(2) Niet bekend, maar mogelijk
interessant
(3) Bekend, maar niet geïmplementeerd
(4) Geïmplementeerd
Bevindingen
Bekendheid van technologieën ?
Soms gekend, maar niet geïmplementeerd ?
21. (1) Niet bekend
(2) Niet bekend, maar mogelijk
interessant
Resultaten
Opbouwend - globaal - %
70
(3) Bekend, maar niet geïmplementeerd
Assemblage - globaal - %
60
60
50
50
40
40
30
20
10
30
20
0
10
0
(4) Geïmplementeerd
22. (1) Niet bekend
Resultaten
Omvormend - globaal - %
70
(2) Niet bekend, maar mogelijk
interessant
Hybride - globaal - %
80
70
60
60
50
50
40
30
40
30
20
10
0
20
10
0
(3) Bekend, maar niet geïmplementeerd
(4) Geïmplementeerd
23. Inhoud
• Inleiding
• AO-project
“Doorbraaktechnologieën voor de Vlaamse maakindustrie”
o
o
Doelstelling & Aanpak
Resultaten (state-of-the-art, sensibilisering, bevraging,..)
• “Building the factory of the future” met nieuwe
productietechnologieën ?
o
o
Hoe ?
Discussiegroep
• Besluit
25. Welke technologieën ? - classificatie
• (1) Technologieën met lage TRL en lage MRL
• (2) Technologieën met relatief hoge TRL,
maar met lage MRL (bv. additieve technieken)
• (3) Technologieën met relatief hoge TRL, maar met lage
MRL in vergelijking tot andere regio’s !
(hardbewerken, precisiebewerkingen,…)
26. (1) lage TRL, lage MRL
• Onderzoek aan universiteiten & onderzoeksinstellingen
Dienen eveneens mee te spelen op Europees en
internationaal niveau
• Veel technologieën blijven (al dan niet voor een bepaalde
periode) hangen op een lager TRL niveau door een tekort
aan R&D middelen
• Kans tot doorbraak veelal via pioneerbedrijven (bv. spinoffs universiteiten) of bedrijven met een duidelijke visie op
innovatie welke het TRL-niveau van een technologie
versneld willen verhogen
o
27. www.sendsteps.com
We gaan stemmen, pak uw telefoon!
Internet
1
2
SMS
1
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/download2
sendsteps-software
Twitter
1
2
Stemmen is anoniem
28. Ben ik bereid te investeren in nieuwe technologieën indien de
TRL waarde lager is dan 5 (op laboschaal gevalideerd)?
A. JA
B. NEE
Stemmen: 45
Gesloten
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/downloadsendsteps-software
29. Ben ik bereid te investeren in nieuwe technologieën indien de
TRL waarde lager is dan 5 (op laboschaal gevalideerd)?
A. JA
B. NEE
55,6%
44,4%
Gesloten
30. Als het economisch potentieel duidelijk zou bewezen zijn van
een technologie met lage TRL, ben ik dan bereid te
investeren, niettegenstaande dit nog een relatief grote
investerings/implementatiekost zou vergen?
A. JA
B. NEE
Stemmen: 70
Gesloten
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/downloadsendsteps-software
31. Als het economisch potentieel duidelijk zou bewezen zijn van
een technologie met lage TRL, ben ik dan bereid te
investeren, niettegenstaande dit nog een relatief grote
investerings/implementatiekost zou vergen?
A. JA
B. NEE
85,7%
14,3%
Gesloten
32. (2) hoge TRL, lage MRL
• Technologie toegepast door een beperkt aantal bedrijven !
• Wat beperkt een ruimere toepassing ?
o
Schrik voor implementatie
• Want implementatie vraagt veel kennis en geld (zelfs voor
technologieën met een hoge TRL)
o
o
Ik wacht af en zie wat de ander doet ?
Technologieën veelal te complex ?
33. De implementatie van technologieën (hoge TRL, lage MRL),
wordt beperkt door
A. Gebrek aan technische bedrijfskennis voor implementatie
B. Economisch potentieel is niet duidelijk (afzetmarkt niet
duidelijk, wat zal het opbrengen?, ...)
C. Gebrek aan geld/tijd (omwille van de hoge kost voor
implementatie)
Stemmen: 69
Gesloten
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/downloadsendsteps-software
34. De implementatie van technologieën (hoge TRL, lage MRL),
wordt beperkt door
A.
Gebrek aan technische
bedrijfskennis voor
implementatie
B.
Economisch potentieel is
niet duidelijk (afzetmarkt
niet duidelijk, wat zal het
opbrengen?, ...)
C.
Gebrek aan geld/tijd
(omwille van de hoge kost
voor implementatie)
17,4%
47,8%
34,8%
Gesloten
35. (3) hoge TRL, lagere MRL (↔ andere regios)
• Er zijn reeds heel wat projecten geweest ?
Bv. collectieve onderzoeksprojecten Sirris
• Implementatie van technologie (bv. multi-assig frezen,
compleet bewerken,..) blijft soms beperkt ? Waarom ?
o
• Cultuur van onze Vlaamse bedrijven ?
• Opleiding interne mensen ?
• Nood aan meer en grotere (geconcentreerde) centra voor
technologiedemonstratie ?
• …
36. Loopt volgens u Vlaanderen achterop in de implementatie
van technologieën met hoge TRL (en hogere MRL in het
buitenland)?
A. Ja, omwille van een minder goed economisch klimaat in
Vlaanderen
B. Ja, want we hebben de cultuur niet
C. Nee, we doen het even goed
Stemmen: 60
Gesloten
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/downloadsendsteps-software
37. Loopt volgens u Vlaanderen achterop in de implementatie
van technologieën met hoge TRL (en hogere MRL in het
buitenland)?
A.
Ja, omwille van een
minder goed
economisch klimaat
in Vlaanderen
B.
Ja, want we hebben
de cultuur niet
C.
Nee, we doen het
even goed
13,3%
71,7%
15,0%
Gesloten
38. Valorisatie van collectieve onderzoeksprojecten (Sirris,
TETRA projecten,..) is veelal beperkt binnen het eigen bedrijf
(veelal voor technologieën met hoge TRL)
A.
B.
C.
D.
Ik heb nooit deelgenomen aan dergelijke projecten
Interesse, maar geen tijd om deel te nemen
Interesse, maar eerder verkennend (niet pro-actief)
Actieve deelname, maar implementatie binnen bedrijf
beperkt omdat economisch potentieel niet duidelijk is
E. Actieve deelname, maar implementatie van bestudeerde
technologie blijf te complex
F. Actieve deelname en succesvolle implementatie
Stemmen: 56
Gesloten
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/downloadsendsteps-software
39. Valorisatie van collectieve onderzoeksprojecten (Sirris,
TETRA projecten,..) is veelal beperkt binnen het eigen bedrijf
(veelal voor technologieën met hoge TRL)
A.
Ik heb nooit deelgenomen
aan dergelijke projecten
B.
Interesse, maar geen tijd
om deel te nemen
C.
Interesse, maar eerder
verkennend (niet...
D.
Actieve deelname, maar
implementatie binnen...
E.
Actieve deelname, maar
implementatie van...
F.
Actieve deelname en
succesvolle implementatie
25,0%
8,9%
25,0%
26,8%
5,4%
8,9%
Gesloten
40. Inhoud
• Inleiding
• AO-project
“Doorbraaktechnologieën voor de Vlaamse maakindustrie”
o
o
Doelstelling & Aanpak
Resultaten (state-of-the-art, sensibilisering, bevraging,..)
• “Building the factory of the future” met nieuwe
productietechnologieën ?
o
o
Hoe ?
Discussiegroep
• Besluit
41. Besluit
• Er is nog heel wat te doen om technologieën op een hoger
TRL/MRL niveau te krijgen !
• De Vlaamse overheid overweegt duidelijke acties, maar
hierbij is een actieve (ook financieel) deelname van de
industrie (maakindustrie) vereist
42. Denk je innoverend bezig te zijn ?
A. JA
B. NEE
Stemmen: 62
Gesloten
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/downloadsendsteps-software
44. Is er nood aan bijkomende (betere) opleidingsformules
(navorming)?
A. Nee, bestaande kanalen (verkopers, Internet, ...) zijn
voldoende
B. Ja, op regelmatige basis wetenschappelijke/technische
seminaries (bv. 4 per jaar)
C. Postgraduaten (bv. in het domein van de maakindustrie)
Stemmen: 64
Gesloten
Deze presentatie is geladen zonder de Sendsteps plug-in.
Plug-in gratis downloaden? Ga naar http://sendsteps.com/downloadsendsteps-software
45. Is er nood aan bijkomende (betere) opleidingsformules
(navorming)?
A.
Nee, bestaande kanalen
(verkopers, Internet, ...)
zijn...
B.
Ja, op regelmatige basis
wetenschappelijke/technisc
he seminaries (bv. 4 per
jaar)
C.
Postgraduaten (bv. in het
domein van de
maakindustrie)
10,9%
57,8%
31,3%
Gesloten
46. Manufacturing Day 2013
Building the factories of the future !
Dank voor jullie aandacht en
medewerking
Prof. Dr. Ir. Bert LAUWERS
Onderzoeksgroep “Advanced Manufacturing”,
Departement Werktuigkunde
Voorzitter W&T KU Leuven | Campus De Nayer & Geel