Seno Widya Manggala graduated from Institut Teknologi Sepuluh Nopember with a degree in physics engineering. He has experience in renewable energy projects involving solar panels and hydrokinetic turbines. Currently he is the general manager of CV Rekayasa Agro Teknologi, a hydroponics farm business he helped grow significantly. His interests include creating projects to increase productivity and efficiency while reducing fossil fuel usage and increasing renewable energy.
HEMM machine & Mining Service. Machine Architecture, servicing & robust opera...Subham Paul
I am involved into Maintenance Planning & Spare part. I was involved with Fleet management & Forecasting of spare parts. Tracking equipment life & sub component details are tracked for better efficiency & life. Before moving to mining Industry i was responsible for Energy management.
HEMM machine & Mining Service. Machine Architecture, servicing & robust opera...Subham Paul
I am involved into Maintenance Planning & Spare part. I was involved with Fleet management & Forecasting of spare parts. Tracking equipment life & sub component details are tracked for better efficiency & life. Before moving to mining Industry i was responsible for Energy management.
Joydip Jana is a Renewable Energy Researcher & presently working in the field of Grid Integration of Renewable Energy, Smart Microgrid, Storage Systems including Super Capacitor and Vanadium Redox Battery etc. with Indian Institute of Engineering Science & Technology (IIEST), Shibpur. Currently he is involved in a project “Advanced Research on Thin Film Silicon Solar Cell & PV Systems” funded by Ministry of New and Renewable Energy (MNRE) of Govt. of India and implemented by IIEST, Shibpur. The project includes design, development and field testing of MPPT based high efficiency inverters and grid synchronizing system components used in grid interactive roof top PV systems and design, field-testing and performance evaluation of BIPV system in Indian Institute of Engineering Science & Technology (IIEST), Shibpur, West Bengal, India. He has worked with RRCAT, a centre of Bhaba Atomic Research Centre (BARC), Govt. of India for setting up a Digital Fast Feedback Control System using FPGA for RF Signals in the particle accelerator installed in RRCAT, Indore. He published several papers in different national & international conferences and journal and wrote a book chapter on “Solar PV Power Generation” in “Advances in Solar Energy Science & Engineering, Vol.1” published by National Institute of Solar Energy (NISE), Govt. of India. He was involved in a project for set up 100kW Grid-Tied solar power plant at State Bank of India, Sammridhhi Bhavan, Local Head Office, Kolkata for providing consultancy services for preparation of synopsis of tenders (Technical & Commercial), pre-bid design, drawing & BOQ preparation, vendor selection, site visit, site layout, Engineering drawing preparation, system design with PVSyst software, making mechanical, electrical and structural drawing using AutoCAD software, design, selection of SPV modules and BOS, site supervision and commissioning of the project. He successfully designed, developed & installed solar system in Electric Vehicle application in the year 2015.
I am Bachelor in Electrical Engineering from a reputable institute of Pakistan and currently I am working in Saudi Binladin Group O&M Haramain, Makkah, KSA.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Governing Equations for Fundamental Aerodynamics_Anderson2010.pdf
Seno widya manggala
1. Address : Ayub Dalam No. 37, Pejaten Barat, South Jakarta, Jakarta 12510
Date of Birth : December 23nd
, 1993
Email : seno.manggala@gmail.com
Mobile : +62-81317900079
SUMMARY
EDUCATION BACKGROUND
Institut Teknologi Sepuluh Nopember, Surabaya
Major : BSc Physics Engineering | 2011 - 2016
Minor : - Measurement and Calibration
- Bussiness Development
- Renewable Energy (Solar and Hydrokinetic turbine)
Cumulative GPA : 3.05/ 4.00
Thesis Title : Design of Vertical Axis Straight Blade Cascade Ocean Current Turbine to Understand the Effect
of Blade Variation Toward Turbine's Efficiency
WORK AND LEADERSHIP EXPERIENCES (SELECTED)
• CV Rekayasa Agro Teknologi October 2016 - Present
Position : General Manager
Responsibilities and Achivement :
- Increase company growth and traction.
- Manage hydroponics farm production
- Manage team leader to accomplish target.
- Developing Company Business and Product.
- Success to generate own recipe Fertilizer formula (AB-MIX).
- Achived 13 fruit and vegetable supermarket in greater Jakarta.
- Success to open one store at kota wisata cibubur.
- Achived 80 store customer per day on average.
- Manage 20 hydroponics farm.
- Success to mastering 23 vegetable species into daily production.
- Succefully raised to $20K company value.
• Ocean Geology Research & Development Center (PPPGL) September 2015 - April 2016
Position : Junior Researcher
Responsibilities and Achivement :
- In charge to submit final report to Manager.
- Collecting and measuring Ocean Current Data profile at Toyapakeh Strait.
- Responsible to modelling and simulating ocean current hydrokinetic turbine using Computational Fluid Dynamics (CFD).
- In charge to make prototype and do field testing in variant current flow.
• Measurement and Calibration Laboratory ITS October 2013 - January 2016
Position : Electronics Asistant Lecturer
Responsibilities and Achivement :
- Assistant for Measurement and Calibration.
- Assistant for Measurement of Mass, Electrical, and Flow Practice.
- Assistant For Electronic Course including Micro Controller Programming
- In charge to cooperate with Companies to held an event about Measurement in Engineering Physics Dept.
- In charge to Guide Practical mechanism for Electronics and measurement system Experiment Class.
- Succeed to calibrate Earth Meter, High Voltage Tester, AVO meter, PH-Meter, Weight Scale, etc.
- Study and discussion about Microcontroller, Logic Gate, and Mini PC Raspberry.
- In charge to became Trainer at Arduino Training.
SENO WIDYA MANGGALA
Graduated from engineering physics department at Institut teknologi sepuluh nopember having experience in renewable energy
(solar panel and hydrokinetic turbine), Automation Engineering, and Business development. Interested in create project that
increasing productivity or efficiency. Has a strong will to build a cleaner and healthier environment by reducing fossil fuels and
increasing the use of renewable energy.
2. • Mobil Listrik Nasional (MOLINA) ITS January 2014 - October 2015
Position : Monitoring Engineer
Responsibilities and Achivement :
- Setup cars interface dashboard for car condition monitoring.
- Setup solar panel sensor and controller.
- In charge to Research for future MPPT and Battery Management System (BMS).
- Succeed to Design Monitoring System of Solar EV Car “Widya Wahana V”
- In charge to Develop Joule Meter for Indonesia Energy Marathon Challenge (IEMC) 2013
- In charge to Research Telemetry System Using Bluetooth, Wi-Fi, GSM, and Radio.
- Succeed to make Telemetry System covering 2 KM radius.
- Engineering and Procurement services to provide Tools and Material of ITS Electric Vehicle.
• PT. Semen Tonasa June 2014 - August 2014
Position : Internship
Responsibilities and Achivement :
- Responsible to evaluate the performance of Raw Mill.
- Succeed to analyze the flash column PID tuning trial-error with Ziegler Nichols based on DCS ABB 800XA.
- Succeed to repair the pressure indicator connection cable to PLC.
• Vice President UKM Karate-DO ITS August 2012 - August 2013
Responsibilities and Achivement :
- Take attendance UKM president.
- Lead daily training Tuesday and Thursday.
- Coordinate vacation trip and field training.
- Responsible to coordinate the whole staff to manage UKM member karate skill level.
• Head of Public Relation Department Lembaga Minat Bakat (LMB) ITS September 2012 - August 2013
Responsibilities and Achivement :
- Responsible to manage information UKM ITS.
- Practice with other self-defense UKM.
- In charge to Coordinate POMITS event (Pekan Olahraga Mahasiswa ITS).
CONFERENCES AND SEMINARS (SELECTED)
- Renewable energy startup bootcamp as Participant by New Energy Nexus. (2019)
- Hydroponic business analysis as Speaker by SMA 66 Senior high School. (2018)
- Startup confrence as Participant by Tech In Asia. (2018)
- Arduino Microcontroller training as Trainer by Measurement and Calibration Laboratory. (2014).
- National Scientific Contest “PIMNAS 27” as Presenter by Ministry of Education (Kemendikbud), Indonesia. (2014).
- Microcontroller Basic Training as Participant by Measurement and Calibration Laboratory. (2012).
- Unit kegiatan Mahasiswa (UKM) Management Workshop as Participant by ITS. (2012).
- Fundamental of Management & Leadership Training as Participant by Eng. Physics Department. (2011).
- Workshop for Roboholic throughout National as Participant by Eng. Physics Department. (2011).
AWARD (SELECTED)
• World Solar Challenge 2015, Australia.
- Succeed to achieve 7th
Position from 14th
Challenger in Cruiser class.
- Finish 2200 Km track from Darwin to Adelaide (Australia).
- Succeed to Design Car Monitoring System and Optimize MPPT of Solar Panel.
• National Scientific Contest “PIMNAS 27” 2014 by Ministry of Education dan Cultural (Kemendikbud), Indonesia.
- Succeed to achieve Bronze Medals in PKM-KC Class.
- Succeed to Modify Bicycle Shock Breaker Convert into Electricity.
- Succeed to Design Boost Converter.
• Indonesia Energy Marathon Challenge 2014 by Ministry of Education dan Cultural (Kemendikbud), Indonesia.
- Succeed to achieve as a finalist from 30 participants throughout Indonesia.
- Succeed to optimize the stable BLDC Motors to gather High Efficiency.
3. SKILLS
Language
- Bahasa Indonesia : Native
- English : Good
- Javanese : Good
Programming Language
- Java
- C
- BASIC
Computer
- Software : Eclipse, Android Studio, Ansys, MatLab, Ms. Office
- Hardware : Arduino, ST-Link, Raspberry.
Publication
• Innovation in Vertical Axis Hydrokinetic Turbine –Straight Blade Cascaded(VAHT-SBC) design
and testing for low current speed power generation (IOP Publishing - May 2018)
-
- https://iopscience.iop.org/article/10.1088/1742-6596/1022/1/012023/meta
This study examines an innovative turbine with the addition of the number and arrangement of straight blade cascaded
(SBC). SBC is a combination of passive variable-pitch and fixed pitch of each turbine arm. This study was conducted in an
open channel flow that has a current velocity (V-m/s) of 1.1, 1.2, and 1.3. RPM and torque ware measured for the
coefficient of performance (Cp) and tip speed ratio (TSR) calculation. Without changing the turbine dimension, the
employment of cascaded blade (three blades in each arm) contributes to improve energy extraction significantly. A
significant increase in Cp value is seen when 9 blades (3 cascaded blades per arm) are used with a Cp 0.42 value at TSR