Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
www.solar-log.com
48 von 97
Configuration
Configuration | Devices | Definition
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
www.solar-log.com
49 von 97
Configuration
Configuration | Devices | Definition | Interfaces
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
www.solar-log.com
50 von 97
Configuration
Configuration | Devices | Definition | Interfaces
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Product Nexiez MRL là loại thang không phòng máy. Thang máy chở khách sử dụng trong các tòa nhà cao tầng, khách sạn, trung tâm thương mại, khu căn hộ, bệnh viện, nhà riêng…
This presentation will give you a glance at NOKIA RNC solutions, RNC configuration,RNC cabinet mechanical structure,RNC architecture, RNC plug-in units (PIU)
,RNC function units (FUs), redundancy and PIUs configuration
Product Nexiez MRL là loại thang không phòng máy. Thang máy chở khách sử dụng trong các tòa nhà cao tầng, khách sạn, trung tâm thương mại, khu căn hộ, bệnh viện, nhà riêng…
This presentation will give you a glance at NOKIA RNC solutions, RNC configuration,RNC cabinet mechanical structure,RNC architecture, RNC plug-in units (PIU)
,RNC function units (FUs), redundancy and PIUs configuration
Drivemode Next Generation Electric Drivetrains for Fully Electric Vehicles Leonardo ENERGY
Presentation of the final event for the three GV04 projects: ReFreeDrive, ModulED and Drivemode. Recordings available at https://www.youtube.com/playlist?list=PLUFRNkTrB5O-38psbMgeWAvzXQ5QWzNsk.
Integrated Modular Distributed Drivetrain for Electric & Hybrid Vehicles
Mitsubishi energy measuring unit ecomonitor plus dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
RiCell is a modular and high efficient fuel cell solution for critical power infrastructure.
Used in a wide range of applications, it\’s 100% free of CO2 emission.
A group project by Sanem Genc (Turkey), Christina Braun (Switzerland), Julius Kühn (Germany), Evelina Kompare (Slovenia), Cagdas Karakurt (Turkey) & Christina Kontaxi (Hellas) for Flims-Laax-Falera region / Graunbunden / Switzerland
ModulED. Next generation powertrains for electric vehiclesLeonardo ENERGY
Presentation of the final event for the three GV04 projects: ReFreeDrive, ModulED and Drivemode. Recordings available at https://www.youtube.com/playlist?list=PLUFRNkTrB5O-38psbMgeWAvzXQ5QWzNsk.
ModulED aims at developing a new generation of modular electric engine based on buried-permanent magnet motor with reduced rare earth use, and electric drivetrain for various configurations of Full and Hybrid Electric Vehicles (including cost, environmental impact, efficiency, and mass manufacturing ready).
Thang máy công nghệ tiên tiến tiêu hao ít năng lượng, hầu như không ảnh hưởng tới môi trường, phục vụ con người và các tòa nhà một cách hài hòa với sự vận hành trơn tru và êm ái.
Abis Over IP/Abis Optimization on-site Workshopetkisizcom
Recognize new system architecture
Understand the dimensioning rules using the Abis planning tools
Activate the Abis over IP
Activate the Abis Optimization
Use the Performance Monitoring
Design Analysis Ericsson GSM/W-CDMA/LTE 1800MHz RRUS01 B3 60W Remote Radio UnitReportLinker.com
This report covers the design analysis of an Ericsson GSM/W-CDMA/LTE 1800MHz RRUS01 B3 60W remote radio unit. This unit is part of the RBS6601 main/remote base station platform for Ericsson supporting GSM/W-CDMA/LTE. The unit was manufactured in Q2 2011.Key Findings: The remote radio unit combines the RU22 and FU21 units of the prior generation RBS3000 BTS architecture and is similar to the RRU22 with the major exception that this RRU does not require and forced air cooling. Ericsson has switched to a new amplifier design and mounting system for the high power RF transistors in this remote radio unit.Component and semiconductor suppliers mentioned in this report include: Analog Devices, Altera, Anaren Microwave, Broadcom Corp., Coilcraft, Epson Toyocom, Fairchild Semiconductor, Freescale Semiconductor, Hittite Microwave, Huber+Suhner, Infineon Technologies, Integrated Device Technology, Kemet, M/A-COM, Maxim Integrated Products, Micron, Murata, National Semiconductor, NDK, NEC, Nippon Chemi-Con, Nichion, NXP Semiconductors, ON Semiconductor, Panasonic, Peregrine Semiconductor, Pulse Engineering, Renesas Electronics, RF MicroDevices, Sanyo Electric, Skyworks Solutions, STMicroelectronics, TDK-Epcos, Texas Instruments, TriQuint Semiconductors. Vishay Semiconductors, and Xilinx.Features: Complete Part Number/Marking Component Manufacturer Identification Function Component Description Package TypeTotal Pages: 129Total Tables: 29Total Exhibits: 121Important Note: There is NO component pricing contained within the report.
The ML-MAP SISO decoder architecture with our proposed technique has to investigate further its performance in terms of
area usage
power consumption
timing delay.
Memory usage
Drivemode Next Generation Electric Drivetrains for Fully Electric Vehicles Leonardo ENERGY
Presentation of the final event for the three GV04 projects: ReFreeDrive, ModulED and Drivemode. Recordings available at https://www.youtube.com/playlist?list=PLUFRNkTrB5O-38psbMgeWAvzXQ5QWzNsk.
Integrated Modular Distributed Drivetrain for Electric & Hybrid Vehicles
Mitsubishi energy measuring unit ecomonitor plus dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.vn
RiCell is a modular and high efficient fuel cell solution for critical power infrastructure.
Used in a wide range of applications, it\’s 100% free of CO2 emission.
A group project by Sanem Genc (Turkey), Christina Braun (Switzerland), Julius Kühn (Germany), Evelina Kompare (Slovenia), Cagdas Karakurt (Turkey) & Christina Kontaxi (Hellas) for Flims-Laax-Falera region / Graunbunden / Switzerland
ModulED. Next generation powertrains for electric vehiclesLeonardo ENERGY
Presentation of the final event for the three GV04 projects: ReFreeDrive, ModulED and Drivemode. Recordings available at https://www.youtube.com/playlist?list=PLUFRNkTrB5O-38psbMgeWAvzXQ5QWzNsk.
ModulED aims at developing a new generation of modular electric engine based on buried-permanent magnet motor with reduced rare earth use, and electric drivetrain for various configurations of Full and Hybrid Electric Vehicles (including cost, environmental impact, efficiency, and mass manufacturing ready).
Thang máy công nghệ tiên tiến tiêu hao ít năng lượng, hầu như không ảnh hưởng tới môi trường, phục vụ con người và các tòa nhà một cách hài hòa với sự vận hành trơn tru và êm ái.
Abis Over IP/Abis Optimization on-site Workshopetkisizcom
Recognize new system architecture
Understand the dimensioning rules using the Abis planning tools
Activate the Abis over IP
Activate the Abis Optimization
Use the Performance Monitoring
Design Analysis Ericsson GSM/W-CDMA/LTE 1800MHz RRUS01 B3 60W Remote Radio UnitReportLinker.com
This report covers the design analysis of an Ericsson GSM/W-CDMA/LTE 1800MHz RRUS01 B3 60W remote radio unit. This unit is part of the RBS6601 main/remote base station platform for Ericsson supporting GSM/W-CDMA/LTE. The unit was manufactured in Q2 2011.Key Findings: The remote radio unit combines the RU22 and FU21 units of the prior generation RBS3000 BTS architecture and is similar to the RRU22 with the major exception that this RRU does not require and forced air cooling. Ericsson has switched to a new amplifier design and mounting system for the high power RF transistors in this remote radio unit.Component and semiconductor suppliers mentioned in this report include: Analog Devices, Altera, Anaren Microwave, Broadcom Corp., Coilcraft, Epson Toyocom, Fairchild Semiconductor, Freescale Semiconductor, Hittite Microwave, Huber+Suhner, Infineon Technologies, Integrated Device Technology, Kemet, M/A-COM, Maxim Integrated Products, Micron, Murata, National Semiconductor, NDK, NEC, Nippon Chemi-Con, Nichion, NXP Semiconductors, ON Semiconductor, Panasonic, Peregrine Semiconductor, Pulse Engineering, Renesas Electronics, RF MicroDevices, Sanyo Electric, Skyworks Solutions, STMicroelectronics, TDK-Epcos, Texas Instruments, TriQuint Semiconductors. Vishay Semiconductors, and Xilinx.Features: Complete Part Number/Marking Component Manufacturer Identification Function Component Description Package TypeTotal Pages: 129Total Tables: 29Total Exhibits: 121Important Note: There is NO component pricing contained within the report.
The ML-MAP SISO decoder architecture with our proposed technique has to investigate further its performance in terms of
area usage
power consumption
timing delay.
Memory usage
CloudIndustries.eu - industrial monitoring for hardware, renewables power pla...Evaldas Paliliūnas
Overview of the cloudindustries.eu solution for hardware monitoring applications, renewable power plants and smart metering/energy efficiency solutions.
Prepaid energy meter using GSM is used to record consumed units and send an alert to user via GSM. It is used to reduce power theft in commercial areas.
Siemens ,
Catalog Thiết Bị Điện Siemens , Catalog Thiết Tự Động
Catalog Phụ Kiện Siemens , Catalog Phụ Kiện,
Catalog Siemens , Catalog,
https://www.dienhathe.com,
Chi tiết các sản phẩm khác của Siemens tại https://dienhathe.com
Xem thêm các Catalog khác của Siemens tại https://dienhathe.info
Để nhận báo giá sản phẩm Siemens vui lòng gọi: 0907.764.966
Solar panel monitoring solution using IoT-Faststream TechnologiesSudipta Maity
Faststream Technologies offers an automated IOT based solar panel monitoring/troubleshooting system that allows for automated solar panel monitoring from anywhere over the internet. As part of our solution, we make use of several IoT gateways suitable for different needs, based on SoCs like STM32, ESP32, ublox, CC3200, SiliconLabs, to monitor the solar panel parameters, in turn, providing Solar Plant Insights.
Our system constantly monitors the solar panel and transmits various parameters to the Cloud over the IoT system. Here we make use of the IoT platform to transmit solar power parameters to Amazon/ Azure cloud /IOT server via the gateway (over WiFi and Ethernet). A powerful web interface allows viewing of data in meaningful formats, enabling users to make decisions.
At the market of electrical distribution, transport and generation networks, SELTA brings decades of experience and partnerships with major Italian and international operators. Solutions range from the systems for the control and management of low and medium voltage distribution substations, up to the automation systems of the high voltage transmission network. SELTA is also one of the top European leaders in Smart Grids.
SELTA offers a wide range of Automation/Smart Grid solutions for Energy/Transport electric networks: remote control and management of distribution substations; automation systems for HV/VHV transmission; Scada, RTU, protections; Distributed Automation, Dispersed Generation Management, Smart DMS for Voltage/Power regulation; service telecommunications; power line carrier systems.
European Utility Week (2/2) | Paris - 12 au 14 novembre 2019Cluster TWEED
Les clusters TWEED et Flux50 ont emmené 13 entreprises belges (wallonnes, bruxelloises et flamandes), réunies sous les couleurs belges, au salon mondial European Utility Week mi-novembre!
Orateurs : Comsof, FifthPlay, GreenWatch, Gorilla, Niko, Option, Powerdale, WeSmart.
Ls catalog thiet bi tu dong master p 5000-eDien Ha The
Catalog LS, Catalog,
Catalog Thiết Bị Điện LS, Catalog Thiết Bị Điện,
Catalog Biến Tần LS, Catalog Biến Tần,
Catalog Inverter LS, Catalog Inveter,
http://dienhathe.com,
Chi tiết các sản phẩm khác của LS tại https://dienhathe.com
Xem thêm các Catalog khác của LS tại https://dienhathe.info
Để nhận báo giá sản phẩm LS vui lòng gọi: 0907.764.966
Ls catalog thiet bi tu dong master p 5000-e_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Nidec ASI S.p.A., a Nidec Group company, offers motors and related products for home appliance, commercial, and industrial applications. After joining the Nidec Group in 2012, the company changed its name from Ansaldo Sistemi Industriali S.p.A. to Nidec ASI S.p.A. The company, which engages in large industrial motor, power generator, low- and middle-voltage drive, industrial system and automation, and other businesses, makes a strong showing especially in the areas of metal, power generation (using renewal energy), oil and gas, marine transportation, and general industry.
Introduction of Orissa Wicomm corporate profile and products.
Representing Narada Liithium-ion and Lead Acid Battery products and solution. Lightning Protection and Site Access Monitoring & Control Solution
Soluções para fazer autoconsumo eficiente em Portugal. Olha o vídeo: https://youtu.be/cIpfmjoOFi4
Eng. Arturo Andrés, Responsável do Departamento Técnico da Krannich Solar.
Sistemas de montagem, painéis solares e inversores fotovoltaicos óptimos para o mercado português.
Eng. Arturo Andrés, Responsável do Departamento Técnico da Krannich Solar.
Que critérios seguir para eleger correctamente os teus produtos para instalações de energia solar?
Eng. Arturo Andrés, Responsável do Departamento Técnico da Krannich Solar.
Produtos e conselhos para sacar o máximo rendimento da tua instalação fotovol...Krannich Solar Portugal
Produtos fotovoltaicos adequados para as instalações de autoconsumo fotovoltaico em Portugal.
Eng. Stefan Junker, Support Manager Southern Europe de Victron Energy.
Instalações solares de autoconsumo: autoconsumo instantâneo, activação de consumos, limitação de potência activa e sistemas fotovoltaicos com um inversor solar sinoidal.
Autoconsumo solar desde uma nova perspectiva: instalaçõess fotovoltaicas para redes isoladas, bombagem solar ou soluçõess híbridas fotovoltaica-diesel com e sem acumulação.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Search and Society: Reimagining Information Access for Radical FuturesBhaskar Mitra
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
2. Solar-Log™ Installation Training
Agenda
Introduction Solar-Log™ 300, 1200 and 2000
Introduction Solar-Log™ WEB
Network basics and integration of Solar-Log™ into a network
Preparation of installation and inverter detection
Configuration of the Solar-Log™
Powermanagement (Feed-in Management)
www.solar-log.com
2 von 97
4. Company Introduction
Solare Datensysteme GmbH
Founded 2007 by
Thomas Preuhs and Jörg Karwath
Headquarter:
D–72351 Geislingen-Binsdorf
Employees in SDS: 80 (Jan 2014)
Employees in Company Group: 220 (Jan 2014)
Managing Directors and Partners:
Thomas Preuhs
- Finance, Operations
Jörg Karwath
- Technical Development
Guy Thouin
- Marketing & Sales
Sold Solar-Log™ devices: > 217.000 SL units
(912,000 inverters, approx. 6,4 GWp)
www.solar-log.com
4 von 97
13. Solar-Log™ Meter
PV Monitoring and Self-Consumption: measurement in and with one device!
Additional interface for the connection of up to 6 current transformers (CT)
Target group:
Plants for self-consumption without ripple control receiver (no PM+ model required)
Basic types:
Solar-Log™ 300 (up to 15kWp)
Solar-Log™ 1200 (up to 100kWp)
Interfaces:
6 CT can be connected
1, 2 oder 3 phases in different
combinations
Current transformers by SDS:
Closed types
CT 16 A primary current max.16A
CT 100 A-c primary current max.100A
Open types
CT 100 A-o primary current max.100A
Secondary current for all CTs: max. 200mA
CT 16 A
CT 100 A-c
CT 100 A-o
Secondary current also to apply
for converters of other manufacturers.
www.solar-log.com
13 von 97
14. Solar-Log™ Meter
Operating Mode
Current transformers measure AC potential-free.
Current transformers have a defined ratio between primary and secondary current.
Solar-Log™ to calculate the power as follows:
Secundary current Isec is measured with the meter interface of the Solar-Log™
Voltage U is either configured in the Solar-Log™ or
the measured values of the inverters are being used.
Isec
Calculation of the power P by the Solar-Log™:
(Isec x ratio) x U = P
Quelle: Wikipedia User Biezl
Iprimary
www.solar-log.com
14 von 97
15. Solar-Log™ Meter
Cabling
Installation of total consumption
Installation of appliance,
single phase
Wiring symbol for current transformer (CT)
www.solar-log.com
15 von 97
Installation of appliance,
three phases
22. Solar-Log™ WEB
Solar-Log™ WEB „Classic 2nd Edition“
Yield visualization
Inverter event protocol
Publicly visible or password protected
Access via home.solarlog-web.eu
Plant sizes <30 kWp* free of charge for web service
+
Basic features for (private) plant owners/end customers
+
Easy and fast registration process
*to differ in some countries (free up to 20 or 50 kWp , Italy, Spain, Portugal, Israel)
www.solar-log.com
22 von 97
23. Solar-Log™ WEB
Solar-Log™ WEB „Commercial Edition“
•
Central plant administration
•
Remote configuration
•
Clearly arranged overview
•
Plant logbook for operation and maintenance
•
Individual layout (CI) possible
•
User-defined access rights
•
Yield and error reports
•
Costs according to plant size (first 30 days free of charge)
+
Professional „Full Service“ monitoring, ideal tool for O&M approach
+
Time and cost saving
www.demo.solarlog-web.com
(user: demo; password: demo)
www.solar-log.com
23 von 97
25. Network Setup
Starting point:
(WiFi) Router
Tasks:
To establish an internet connection
Internet
To administrate connected devices
WiFi
Router
TM
(PC, notebook, mobile phones, Solar-Log )
Solar-Log™
WEB
www.solar-log.com
25 von 97
PC or laptop
APP
Solar-Log™ Smart-Plug
26. To establish a connection (Router - Solar-Log™)
Connection Solar-Log™ - Router
•
Directly via network cable
•
Network sockets
Internet
Router
Printer
www.solar-log.com
26 von 97
PC or
laptop
Solar-Log™ Smart-Plug
27. To establish a connection (Router - Solar-Log™)
PowerLAN
TM
Solar-Log
in a network:
Connection via PowerLAN (dLAN®, Powerline)
Existing power lines are used for data transfer
To cross limitations created by house or flat
Solar-Log™
Router
Attention!
Please use wall sockets!
www.solar-log.com
27 von 97
28. To establish a connection (Router - Solar-Log™)
Cable
Default: DHCP
IP address, subnet mask and Gateway can be set up manually, if requested
DNS can be defined optionally
Solar-Log™
www.solar-log.com
Router
Internet
28 von 97
29. To establish a connection (Router - Solar-Log™)
Solar-Log™ WiFi and WiFi Router
Steps:
1.
Activate WiFi with Solar-Log™
2.
Search for networks / WPS
3.
Encryption / Password
4.
Check Status
Solar-Log™
WiFi
www.solar-log.com
optional
WiFi
Repeater
WiFi
Router
Internet
29 von 97
30. To establish a connection (Router - Solar-Log™)
Direct connection via cross-over cable
Solar-Log™ be connected directly via cross-over cable to a PC or a laptop
Solar-Log™ WiFi
www.solar-log.com
PC or laptop
30 von 97
31. Successful connection
Access the internal web server via internet browser
4 possibilities:
Solar-Log™ URL:
http://solar-log
Solar-Log™ URL, if more than one Solar-Log™ in the network:
http://solar-log-wxyz
IP address in DHCP range:
169.254.wx.yz
IP address defined at start up:
type in defined IP address
wxyz : last four digits of the serial
number of the Solar-Log™.
www.solar-log.com
31 von 97
32. Successful connection
Access the internal web server via internet browser
Solar-Log™ menu can be
handled like a regular website
Welcome page of Solar-Log™
Start configuration
www.solar-log.com
32 von 97
33. Connection established
Displaying the internal web server of the Solar-Log™
The menu is divided into four areas:
Main navigation (A)
Left navigation (B)
Tabs (C)
Configuration area(D)
The configuration site „Ethernet“ can be
found via the following path:
Configuration | Network | Ethernet
www.solar-log.com
33 von 97
35. Preparation of installation
Inverter interfaces
In general:
all inverters have to be provided with one of the following
interfaces compatible with Solar-Log™
RS 485
RS 422
Ethernet
CAN
SMA:
different interfaces for different inverter series
RS485 – PiggyBack from SMA or Solare Datensysteme
SMA RS485 Data Module DM-485-CB
Quick Module
Speed Wire Module
RS 485 Data Module Type B
Fronius:
ComCard has to be retrofitted
Fronius inverters can only be used with RS 485/422 B interface
Not compatible with „Fronius Power Control Card“
www.solar-log.com
35 von 97
36. Cabling Advices
Please use high quality cables:
LIYCY >=0,14mm2 or CAT 5/7 SSTP
Please consider manufacturers‘ requirements concerning UV stability and installation
For long distances, please use cables with a bigger diameter
Please use cable end sleeves for flexible wires
Please twist pairs and shielding
Please wire/cable from left to right
Please wire/cable from bright to dark colors
Wrong cabling = problem #1!
Please work very accurately.
Please do not try to save material.
www.solar-log.com
36 von 97
37. Solar-Log™ RS485 Wireless Package
To replace the RS485 cabling by radio signals
Completely configured for specific inverter brands
Flexible use
Complete cable set including connecting cable for the inverter
RS485
RS485
Solar-Log™
www.solar-log.com
37 von 97
38. Solar-Log™ RS485 Wireless Package
Installation
TM
Complete cabling of inverters to Solar-Log
Detection of inverters without Wireless Package (with Solar-Log
Connection cable set Wireless Package and inverter connection cable (socket plug)
No new detection of inverters required
TM
directly)
Configuration | Devices| Definition | Interfaces
Attention: Please do not cut the original cable!
www.solar-log.com
38 von 97
39. Sensor Technology
RS 485 Irradiation Sensor
Sensor Box Commercial
Sensor Basic
Reference measurement of solar irradiation
Measurement of module temperature integrated in device
Optional
Wind sensor
Ambient temperature
sensor
Up to 9 Sensor
boxes can be
connected in RS485
bus
Not compatible with
inverters using RS422
SMA Tripower inverter series
Only one Sensor
basic can be
used
www.solar-log.com
For residential
plants
39 von 97
40. Recording Self-Consumption
Via consumption meter (S0 or RS485) or Solar-Log™ Meter and current transformers (CT)
PV plant
Bi-directional Meter
Grid
NS-Netz
Consumption meter or
current transformer CT
Solar-Log™
Appliance
Purchased
electricity
Self-consumption
Data line
www.solar-log.com
40 von 97
41. Installation Summary
Steps
Registration with Solar-Log™ WEB services (portals)
Preparation of the inverters (e. g. to combine the interface, to define device address)
Correct cabling Solar-Log
TM
and inverter(s)
Recommendation: please use pre-configured connecting cables of Solar-Log™
TM
device – start detection
Select inverter brand in Solar-Log
Wait for the completion of the detection (please do not interrupt!)
Inverter configuration (MPP tracker power, module fields, names)
www.solar-log.com
41 von 97
43. Easy Installation
Step 1
Inverter detection (all relevant inverter manufacturers).
Specific to country, e.g. Germany: SMA / PowerOne / Kaco / SolarMax / Fronius
Inverters
Step 2
Establishing an internet connection.
Solar-Log™ to send basic configuration to the pool server.
Step 3
When providing the Easy Installation Code, the Solar-Log™ „moves“ to the
selected server (SL WEB Commercial or Classic 2nd Edition). Configuration
can be performed via WEB then.
WEB Commercial oder
Classic 2nd Server
Easy
Installation
Server
www.solar-log.com
(WiFi)
Router
43 von 97
44. Easy Installation
Easy Installation Server
Take over of the Solar-Log™ from Easy Installation Server to SL
WEB Server triggered by providing the Easy Installation Code
Final and complete configuration of Solar-Log™ via web interface
After final configuration, the Solar-Log™ to receive the final login
data for the portal server and to send yield data
SL WEB Server
Commercial or Classic 2nd Edition
www.solar-log.com
44 von 97
45. Configuration
Configuration | Network | Ethernet
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Network settings:
- Ethernet
- WiFi
specific to Solar-Log™ version
- GPRS
- Proxy (activation via Display advanced configuration at Configuration | System | Access control)
www.solar-log.com
45 von 97
48. Konfiguration
Configuration | Internet | Access type
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Access type
Please select type of internet access
www.solar-log.com
48 von 97
49. Configuration
Configuration | Internet | Portal
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Settings for SL WEB Commercial Edition
Activate data transfer
Define Portal Server
Select Transfer interval
Save settings
Data transfer to portal server via HTTP
www.solar-log.com
49 von 97
50. Configuration
Configuration | Internet | Portal
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Settings for SL WEB Classic 2nd Edition
Activate data transfer
Define Portal Server
Select Transfer interval
Save settings
When selecting Classic 2nd Edition, local monitoring
is activated automatically.
Email access data has to be provided for notifications.
Data transfer to portal server via HTTP.
www.solar-log.com
50 von 97
51. Configuration
Configuration | Internet | Local Monitoring
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Local Monitoring
Activation via switch
-
Configuration email data for SL WEB Classic 2nd Edition
-
Emails, data export and backup to third-party server
-
Extended data transfer export via FTP to „third“ external server – only one time per day (evening time) –
(more than 1 data transfer per day possible with FTP licence code)
www.solar-log.com
51 von 97
52. Configuration
Configuration | Devices| Definition |Interfaces
Network
Internet
Devices
Definition
Detection
Configuration
…
Devices-Definition-Interfaces
The connected devices at each interface
are configured in this menu
Interfaces connected to Solar-Log™ Wireless
Package have to be activated
Page specific to Solar-Log™ version
www.solar-log.com
52 von 97
53. Configuration
Configuration | Devices| Definition | Meter
Network
Internet
Devices
Definition
Detection
Only for
Solar-Log™
Meter!
Configuration
…
Definition of current transformers (CT)
Operating mode:
Definition:
Select Solar-Log™ CT or type in ratio
= primary current/secundary current
Reference voltage:
measure voltage or use the voltage values provided by the inverters
www.solar-log.com
53 von 97
54. Configuration
Configuration | Devices| Definition | Smart-Home
Network
Internet
Devices
Definition
Detection
Configuration
…
Definiton of switch for Smart-Home functions
Select switch slot (max. 10)
Switch type:
Activate switch
Define Interface/Adress and Subadress
Save settings
Status and test:
Switch ON/OFF manually, switch status (0 or 1) and, if necessary, measured values (W, V and °C)
www.solar-log.com
54 von 97
55. Hardware - Smart-Home
SmartPlugs
Allnet All 3075 V2, metering, 16A, Ethernet
Art.No. 255429
Allnet All 3073 WLAN, no metering, 8 A, WiFi and Ethernet
Art.No. 255616
Gude 1100 / 1101 metering, optionally temperature sensor, switch on wall plug
Gude 1102 / 1103 no metering, optionally temperature sensor, switch on wall plug
Relay
Smart-Home Relay Box (ADAM 4068)
Art.No. 255656
8 Relays, switchable range from 30V/1A to 230V/250mA ,
own RS485 interface required (no inverters in the same bus, please!)
More compatible relays
Gude Expert PowerControl 1002: 4 relays, 230V, switch at device – top hat rail mounting
Gude Expert NetControl 2301: 4 relays, 230V, 1 sensor interface, switch at device – top hat rail mounting
www.solar-log.com
55 von 97
56. Configuration
Configuration | Devices| Detection
Network
Internet
Devices
Definition
Detection
Configuration
…
Device-Detection
Start detection after definition
Inverters have to feed into the grid
Meters have to be connected
CTs will get automatically assigned to the meter
www.solar-log.com
56 von 97
57. Configuration
Configuration | Devices| Configuration
Network
Internet
Devices
Definition
Detection
Configuration
…
List of all detected devices
Inverters
Maximum AC power
PAC correction factor
MPP tracker data
Module field
Generator power
Description
Meter
Operating mode
Maximum AC power
Description
www.solar-log.com
58 von 97
58. Excursion Module Fields
Module fields are defined by equal solar panel types, same module pitch and same module direction:
All modules of same type and same pitch and direction –> same module field
Different pitch and direction and/or different module types –> different module fields
Inv1 – MPP1
Module field 1
Roof ridge
Inv1 – MPP 2
Module field 1
Inv1 – MPP3
Module field 2
www.solar-log.com
59 von 97
59. Configuration
Configuration | Devices| Order
Network
Internet
Devices
Definition
Detection
Configuration
…
Devices-Configuration-Order
Order of inverters can be changed by Drag&Drop
Inverter address or serial number
Inverter description
Internal number
www.solar-log.com
60 von 97
60. Configuration
Configuration | Plant| Plant Groups
Network
Internet
Devices
Plant
…
Plant Groups
Activate function
Define description
Klicking on symbol opens
a drop-down menu
Select inverters of this group
Save settings
www.solar-log.com
61 von 97
61. Configuration
Configuration | Plant
Menu items:
Plant groups
Graphic
Graphic scaling options
Forecast
Monthly shares
Time of sunrise and sunset
Yearly target [kW/kWp]
Compensation for electricity fed into the grid – several options:
Compensation for electricity fed into the grid
Compensation for electricity fed into the grid & remuneration for self-consumption
Compensation for electricity fed into the grid + self-consumption
Self-consumption
Costs (Electricity price) [€/kWh]
www.solar-log.com
62 von 97
62. Configuration
Configuration | Plant | Tariff
Calculation of break even point
Different types of remuneration:
Feed-in tariff
Feed-in & self-consumption
Feed-in tariff
+ self-consumption
Self-consumption
www.solar-log.com
63 von 97
63. Configuration
Configuration | Notifications| Addressee
Network
Internet
Devices
Plant
Notifications
…
Notifications - Address
Defining the email address
Second address separated by semicolon (;)
Further information by clicking on question mark
www.solar-log.com
64 von 97
64. Configuration
Configuration | Notifications | Device Notifications
Network
Internet
Devices
Plant
Notifications
…
Device Notifications
Device notifications specific
for the inverters
Default settings do normally not
require adjustments
www.solar-log.com
65 von 97
65. Configuration
Configuration | Notifications| Yield
Network
Internet
Devices
Plant
Notifications
…
Three different types of notifications
Yield (short)
Yield overview (all inverters)
Yield overview (all inverters & groups)
Yield notifications via email
or SMS
Defining the days and times
of the reports
www.solar-log.com
66 von 97
66. Configuration
Configuration | Notifications| Power & Failure
Network
Internet
Devices
Plant
Notifications
…
Configuration of the monitoring parameters
Clicking „SAVE ALL…“ will result in
accepting the parameters for all devices
Clicking „SAVE MULTIPLE…“will result in
accepting the parameters for all connected
devices
Duration of interval = 5 min
www.solar-log.com
67 von 97
67. Configuration
Configuration | Notifications| Power & Failure
Network
Internet
Devices
Plant
Notifications
…
Solar-Log™ to send emails if PM Powermanagement
is activated in order to monitor this function.
Configuration | Notifications| Alarm
Only applicable for Solar-Log 2000
The following actions can be triggered
by the alarm contact: email, SMS, relay, speaker.
www.solar-log.com
68 von 97
68. Configuration
Configuration | Special functions | Smart-Home
Network
Internet
Devices
Plant
Notifications
Special functions
Smart-Home
Feed-In Management
…
Smart-Home - Control Logic:
Configurable pre-programmed control logics do
control the configured switches
(Configuration | Devices| Definition | Smart-Home)
www.solar-log.com
69 von 97
69. Configuration
Configuration | Special functions | Smart-Home
Solar-Log™ calculating the surplus
Production:
• Based on information sent by the inverter
Consumption:
• Based on information sent by the connected consumption meter
Solar-Log™ always calculates average values within 5 minutes.
Changes and switchings only take into effect every within 5 minutes.
Please consider this when testing profiles!
Surplus:
• One profile:
production
– consumption
= surplus
• Several profiles:
production
– sum (typical nominal power of the activated profiles)
= surplus
www.solar-log.com
71 von 97
70. Configuration
Configuration | Special functions | Smart-Home
Network
Internet
Devices
Plant
Notifications
Special functions
Smart-Home
Feed-In Management
…
Configuration of the Feed-in Management
The parameters are described in the next section of our training
www.solar-log.com
74 von 97
71. Configuration
Configuration | Data | Initial Yield
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Inital yield can be uploaded as CSV file
Data format:
DD.MM.JJ;Energy [Wh]
01.04.13;136435
02.04.13;138219
File can be created using MS EXCEL, Open Office Calc or any other text editor
Existing data will be overwritten
www.solar-log.com
75 von 97
72. Configuration
Configuration | Data| Data Correction
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Add or correct daily values
Values of a month or year must be defined for one specific day
www.solar-log.com
76 von 97
73. Configuration
Configuration | Data | System Backup and Configuration | Backup| Reset
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
System and data backups
can be done separately
Options:
Restore from hard disk
Save settings to hard disk
Save settings to USB
Restore settings from USB
www.solar-log.com
Backup will be saved daily if USB stick
is connected!
77 von 97
74. Configuration
Configuration | Data | Reset
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Reset to factory settings
Reset yield data
Yield data can be deleted; Solar-Log™ does not need to get configured again
Reset inverter configuration (recommended before redetection, yield data reseted)
Factory settings
No change of firmware version
Solar-Log 1200 and 2000 will keep their network settings
Solar-Log 300 will activate DHCP then
www.solar-log.com
78 von 97
75. Configuration
Configuration | System | Access Control
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Display Access control protection with PIN code
Browser access control parts of the Solar-Log™'s browser menu can be
restricted with a password
Advanced configuration enabled:
Configuration | Network | Proxy
Configuration | Network | Large External Display
Configuration | Network | Forecast
Configuration | Special functions | Direct sales
www.solar-log.com
79 von 97
76. Configuration
Configuration | System | …
Network
Internet
Devices
Plant
Notifications
Special functions
Data
System
Other Functions:
Language / Country / Time settings
Display
intensity setup, Slide Show
Licence administration
Firmware administration
www.solar-log.com
80 von 97
78. Agenda
Solutions from Solare Datensysteme GmbH
• Powermanagement: autonomous and remote controlled functions
• Active Power solutions
• Remote Control
• Reactive Power solutions
• Examples from Germany
www.solar-log.com
82 von 97
79. Preparation of installation
Solar-Log™ to provide different functions for active and reactive power requirements:
Autonomous
Remote
• Power reduction to a
specific percentage
• Optional: calculation
of self-consumption
•
Remote controlled Active Power
•
Optional: calculation of selfconsumption
• Fixed shift factor and
fixed Reactive Power
Active Power
•
Remote controlled Reactive Power
Reactive Power • Reactive Power based
on characteristic curve
P/Pn
www.solar-log.com
• Voltage dependent
Reactive Power Q(U)83 von 97
80. Active Power
Power reduction to a specific percentage
•To limit the inverter‘s power to the set percentage (X%) of the module‘s output
•To control Active and Reactive Power of the inverters through Solar-Log™
www.solar-log.com
84 von 97
81. Active Power
Reduction to a specific percentage with the calculation of self-consumption
•
Innovative solution to minimize losses from the fixed regulation (e. g. 70% or x%)
•
Only if feed-in power (production - self-consumption) exceeds the maximum
inverters are regulated accordingly
•
Using Solar-Log™ Smart-Home functions to optimize self-consumption
www.solar-log.com
85 von 97
82. Active Power - Example
Benefit of reduction to 70% with the calculation of self-consumption
70% with self-consumption
70% fix
www.solar-log.com
86 von 97
83. Remote Control – Option 1
Solar-Log PM+ - the additional interface for potential-free contacts
•
Can be controlled from the grid operator‘s control centre
•
Up to two ripple control receivers can be connected
•
For Active and Reactive Power commands
•
Configuration matrix for individual settings
•
Up to 16 different levels (4 Bit)
www.solar-log.com
87 von 97
84. Remote Control - Option 1
Via Ripple Control Receiver
•
One-way communication (only relay commands)
•
Can handle Active and Reactive Power commands
•
Optional: calculation of self-consumption (consumption meter required)
Ripple Control Receiver
www.solar-log.com
88 von 97
85. Remote Control – Option 2
Solar-Log PM+ Packages
•
Control and response with combination of analog and digital signals
•
PM+ profile for pre-configured settings (depending on requirements of utility company)
•
Simple installation
•
Universal solution for many inverter manufacturers
www.solar-log.com
89 von 97
86. Remote Control and Response Signals
Via Remote Control Technology
•
Bi-directional communication (commands and responses)
•
Control and response with analog (0/4-20mA) and digital signals (relays)
•
Control of the inverter via Solar-Log 1000 PM+ and 2000 PM+
www.solar-log.com
90 von 97
Remote Control
Technology
87. Remote Control – Option 3
Solar-Log Modbus TCP PM Interface
•
Direct connection with Remote Control Technology via Modbus TCP
•
Without analog and digital signals
•
Modbus TCP PM Interface License needed
www.solar-log.com
91 von 97
88. Reactive Power Control
Solar-Log Modbus TCP PM Interface
Fixed shift factor
Fixed reactive power in Var
www.solar-log.com
92 von 97
89. Reactive Power Control
Characteristic Curve P/Pn
Switching between different Reactive Power functions via digital signals possible
www.solar-log.com
93 von 97
90. Power Grid Management
Utility Meter
Application range
•
Controlling Reactive Power – characteristic curve Q(U)
•
•
•
Measuring the voltage at the feed-in connection
Possibility to measure in medium or low voltage grids
Universal (Utility) Meter for response of actual production values over PM+Package
•
PAC, cosφ , U, I, Q
Utility Meter
www.solar-log.com
94 von 97
96. Inverter Wiring
SMA mixed cabling - PiggyBack original and PiggyBack by SDS
SMA
SDS
SDS
SDS
SMA
SDS
www.solar-log.com
SDS
SDS
100 von 97
97. Measurement Self-consumption
Electric plan and installation notes
Relevant points for the configuration of Solar-Log™
Meter (S0 or RS485) has to record total consumption
Configuration password-protected
Define Feed-in Management type
-> customer can not manipulate Solar-Log™
At Configuration | Devices| Configuration
define maximum AC power
and
generator power accordingly
*
Detected meter to be configured as consumption meter
Configuration | Devices| Configuration | Meter configuration
als Verbrauchszähler konfigurieren
* This meter is not required for this function
www.solar-log.com
101 von 97