ScienceShare.co.uk Shared Resource
â˘Download as PPT, PDFâ˘
0 likesâ˘173 views
1) The document discusses organic compounds used in society including biofuels, plastics, and medicines. 2) It evaluates three main types of organic compounds: fuels from oil refining, polymers for plastics, and oxygen-containing compounds used in medicines. 3) The importance of organic compounds in modern society is analyzed by assessing our reliance on fuels, plastics, and pharmaceuticals derived from organic chemistry.
Report
Share
Report
Share
![Biofuels, Plastics and Medicines ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],Scenario: We all know that oil is being used faster than it is being produced. As a journalist you have been asked to research a newspaper article to get people to appreciate the number of products that are obtained from oil. You should consider the advantages and disadvantages of using the products of oil. Produce details of what we might have to do without in the future if oil runs out. You need to include information about how we use these products and the quantities used by an average citizen â you can make estimates based on your own use. Key words: coal, condense, fossil fuel, fractional distillation, fractionating column, gasoline, kerosene, naptha, natural gas, plastics, vapour, addition, alkane, alkene, biodegradable, condensation, covalent bond, cracking, development, double bond, empirical, formulae, hydrocarbon, monomer, monounsaturated, polymer, polymerization, saturated, sustainable, synthesis, thermoplastic, thermosetting, toxicity, unsaturated](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Vat lieu phan huy sinh hoc vat lieu tai tao
Váşt liáťu phân hᝧy sinh háťc Váşt liáťu tĂĄi tấo (Renewable Materials)
A Microscale Spproach to Organic Laboratory Techniques by Donald L. Pavia.pdf
The purpose of this current edition of the microscale lab book is to teach students the techniques of organic chemistry. We desire to share our joy and love of the Âorganic chemistry lab with our students! In this edition, we include many new Âup-to-date experiments that will demonstrate how organic chemistry is Âevolving. For example, there are new experiments involving nanotechnology and biofuels. We also include several new experiments based on Nobel Prize awards, such as using organometallic catalysts for synthesis (Sonogashira Coupling of ÂIodosubstituted Aromatic Compounds with Alkynes Using a Palladium Catalyst and ÂGrubbs-ÂCatalyzed Metathesis of Eugenol with 1,4-Butendiol to Prepare a ÂNatural Product). Also included is a synthesis of the pharmaceutical drug AleveÂŽ (naproxen) in a projectbased experiment. This experiment includes a resolution step and makes extensive use of NMR spectroscopy. There are several new Green Chemistry Âexperiments, and the âgreenâ aspects of experiments from our previous book have been improved. We think that you will be enthusiastic about this new edition. Many of the new experiments will not be found in other laboratory manuals, but we have been careful to retain all of the standard reactions and techniques, such as the ÂFriedel-Crafts r Âeaction, the aldol condensation, Grignard synthesis, and basic experiments designed to teach crystallization, chromatography, and distillation.
Writing Center Posters Expositor
Assignment Writing Service
http://HelpWriting.net/Writing-Center-Posters--Expositor đ
Critical Thinking MOD 82 PGS TOTALStart by reading and follo.docx
Critical Thinking
MOD 8
2 PGS TOTAL
Start by reading and following these instructions:
1. Quickly skim the questions or assignment below and the assignment rubric to help you focus.
2. Read the required chapter(s) of the textbook and any additional recommended resources. Some answers may require you to do additional research on the Internet or in other reference sources. Choose your sources carefully.
3. Consider the discussion and the any insights you gained from it.
4. Create your Assignment submission and be sure to cite your sources, use APA style as required, check your spelling.
Assignment:
1. What is the difference between Physical Causal Explanations and Behavioral Casual Explanations, and how do they tie into critical thinking?
2. Name the types of explanations and how they are evaluated. Use examples from your life to support your answer.
3. What is an Inference to the Best Explanation and how does it relate to forming a hypothesis?
4. What are the definitions of aesthetic value and judgment? Use examples from your life to support your definition.Â
INTRODUCTION TO ETHICS
MOD 8
Start by reading and following these instructions:
1. Quickly skim the questions or assignment below and the assignment rubric to help you focus.
2. Read the required chapter(s) of the textbook and any additional recommended resources. Some answers may require you to do additional research on the Internet or in other reference sources. Choose your sources carefully.
3. Consider the discussion and the any insights you gained from it.
4. Create your Assignment submission and be sure to cite your sources, use APA style as required, check your spelling.
Assignment:
Write an essay addressing each of the following points/questions. Separate your paper into sections outlined below. Each section in your paper needs a clear heading that allows your professor to know which bullet you are addressing in that section of your paper Review the rubric criteria for this assignment.
Your final assignment is to pull together all the information within the modules 1 â 8 to complete the final submission of your topic of choice from module 1. This assignment must be thorough and completely cover the aspects outlined in module 1.
When finalizing your final assignment, please:
¡ Introduce the topic you chose with its definition/background,
¡ Explain your opinion, for or against the topic, when you started your research and analysis,
¡ Discuss 2-3 reasons âfrom scholarsâ in favor and against the topicÂ
¡ In summary format, review your findings and provide an answer if you are for or against the issue (your opinion) and why, based on the facts your scholarly research.
Assignment Expectations
Length: 2000 â 2250 words for this assignment
Structure: Include a title page and reference page in APA style. These do not count towards the minimum word requirement for this assignment.
References: Use the appropriate APA style in-text citations and references for all resources utilized to a.
Recommended
Vat lieu phan huy sinh hoc vat lieu tai tao
Váşt liáťu phân hᝧy sinh háťc Váşt liáťu tĂĄi tấo (Renewable Materials)
A Microscale Spproach to Organic Laboratory Techniques by Donald L. Pavia.pdf
The purpose of this current edition of the microscale lab book is to teach students the techniques of organic chemistry. We desire to share our joy and love of the Âorganic chemistry lab with our students! In this edition, we include many new Âup-to-date experiments that will demonstrate how organic chemistry is Âevolving. For example, there are new experiments involving nanotechnology and biofuels. We also include several new experiments based on Nobel Prize awards, such as using organometallic catalysts for synthesis (Sonogashira Coupling of ÂIodosubstituted Aromatic Compounds with Alkynes Using a Palladium Catalyst and ÂGrubbs-ÂCatalyzed Metathesis of Eugenol with 1,4-Butendiol to Prepare a ÂNatural Product). Also included is a synthesis of the pharmaceutical drug AleveÂŽ (naproxen) in a projectbased experiment. This experiment includes a resolution step and makes extensive use of NMR spectroscopy. There are several new Green Chemistry Âexperiments, and the âgreenâ aspects of experiments from our previous book have been improved. We think that you will be enthusiastic about this new edition. Many of the new experiments will not be found in other laboratory manuals, but we have been careful to retain all of the standard reactions and techniques, such as the ÂFriedel-Crafts r Âeaction, the aldol condensation, Grignard synthesis, and basic experiments designed to teach crystallization, chromatography, and distillation.
Writing Center Posters Expositor
Assignment Writing Service
http://HelpWriting.net/Writing-Center-Posters--Expositor đ
Critical Thinking MOD 82 PGS TOTALStart by reading and follo.docx
Critical Thinking
MOD 8
2 PGS TOTAL
Start by reading and following these instructions:
1. Quickly skim the questions or assignment below and the assignment rubric to help you focus.
2. Read the required chapter(s) of the textbook and any additional recommended resources. Some answers may require you to do additional research on the Internet or in other reference sources. Choose your sources carefully.
3. Consider the discussion and the any insights you gained from it.
4. Create your Assignment submission and be sure to cite your sources, use APA style as required, check your spelling.
Assignment:
1. What is the difference between Physical Causal Explanations and Behavioral Casual Explanations, and how do they tie into critical thinking?
2. Name the types of explanations and how they are evaluated. Use examples from your life to support your answer.
3. What is an Inference to the Best Explanation and how does it relate to forming a hypothesis?
4. What are the definitions of aesthetic value and judgment? Use examples from your life to support your definition.Â
INTRODUCTION TO ETHICS
MOD 8
Start by reading and following these instructions:
1. Quickly skim the questions or assignment below and the assignment rubric to help you focus.
2. Read the required chapter(s) of the textbook and any additional recommended resources. Some answers may require you to do additional research on the Internet or in other reference sources. Choose your sources carefully.
3. Consider the discussion and the any insights you gained from it.
4. Create your Assignment submission and be sure to cite your sources, use APA style as required, check your spelling.
Assignment:
Write an essay addressing each of the following points/questions. Separate your paper into sections outlined below. Each section in your paper needs a clear heading that allows your professor to know which bullet you are addressing in that section of your paper Review the rubric criteria for this assignment.
Your final assignment is to pull together all the information within the modules 1 â 8 to complete the final submission of your topic of choice from module 1. This assignment must be thorough and completely cover the aspects outlined in module 1.
When finalizing your final assignment, please:
¡ Introduce the topic you chose with its definition/background,
¡ Explain your opinion, for or against the topic, when you started your research and analysis,
¡ Discuss 2-3 reasons âfrom scholarsâ in favor and against the topicÂ
¡ In summary format, review your findings and provide an answer if you are for or against the issue (your opinion) and why, based on the facts your scholarly research.
Assignment Expectations
Length: 2000 â 2250 words for this assignment
Structure: Include a title page and reference page in APA style. These do not count towards the minimum word requirement for this assignment.
References: Use the appropriate APA style in-text citations and references for all resources utilized to a.
Writing for publication 2017 writing an abstract
An abstract is a little text that tells the whole story of your research. It's often the only thing that a reader can access so you need to get it right. Sioux McKenna. For more on this, visit: postgradenvironments.com
De 2 a report
Design Engineering report format.(Abstract, Introduction, Acknowledgement,A-E-I-O-U SUMMARY, empathy canvases, Ideation canvas, Mind mapping, product development canvas)
BEM 3701, Hazardous Waste Management 1 Course Descriptio.docx
BEM 3701, Hazardous Waste Management 1
Course Description
An Introduction to hazardous waste management issues, programs, regulations, hazards, identification, characterization,
storage, disposal, and treatment options in the corporate, industrial, and municipal settings.
Course Textbook
Pichtel, J. (2014). Waste management practices: Municipal, hazardous, and industrial (2nd ed.). Boca Raton, FL:
CRC Press.
Course Learning Outcomes
Upon completion of this course, students should be able to:
1. Discuss the history and the legal framework surrounding hazardous waste issues.
2. Characterize the hazardous waste problem in America.
3. Describe various types of hazardous wastes, their impact on the environment, and respective environmental
control and public health remedies.
4. Evaluate relevant regulatory compliance requirements in the industrial environment.
5. Evaluate the efficacy of hazardous waste related mandates and programs.
6. Describe hazardous waste characteristics, pathways in the environment, and toxicological impacts.
7. Evaluate contemporary methods of hazardous waste mitigation and remediation including waste minimization,
pollution prevention, reuse, and recycling.
8. Evaluate safety and health efforts related to hazardous waste workers.
Credits
Upon completion of this course, the students will earn three (3) hours of college credit.
Course Structure
1. Study Guide: Each unit contains a Study Guide that provides students with the learning outcomes, unit lesson,
required reading assignments, and supplemental resources.
2. Learning Outcomes: Each unit contains Learning Outcomes that specify the measurable skills and knowledge
students should gain upon completion of the unit.
3. Unit Lesson: Each unit contains a Unit Lesson, which discusses lesson material.
4. Reading Assignments: Units I-VII contain Reading Assignments from one or more chapters from the textbook.
5. Suggested Reading: Suggested Readings are listed in the Unit II and III study guides. Students are encouraged
to read the resources listed if the opportunity arises, but they will not be tested on their knowledge of the
Suggested Readings.
6. Learning Activities (Non-Graded): The non-graded Learning Activity in Unit II is provided to aid students in their
course of study.
7. Unit Assessments: This course contains four Unit Assessments, one to be completed at the end of Units I, II, V,
and VIII. Assessments are composed of written-response questions.
8. Unit Assignments: Students are required to submit for grading Unit Assignments in Units I-IV, VI, and VII.
Specific information and instructions regarding these assignments are provided below. Grading rubrics are
included with each assignment. Specific information about accessing these rubrics is provided below.
BEM 3701, Hazardous Waste
Management
Course Syllabus
BEM 3701, Hazardous Waste Management 2
9. Ask the Professor: This ...
Benefits and Characteristics Overview of Additives
Review of additive types, benefits and characteristics
Fuel from waste plastic by pyrolysis
Fuel from waste plastic by pyrolysis
Plastic is used [ PP, HDPE, LDPE, PS] .
By :
1-Ali Jumaah Thamer
2-Ali Kadhim Morwad
3- Muslim Kareem
4-Omar Montaser
Iraq-Basra
Production Fuel From Waste Plastic By Pyrolysis (Theoretical part)
In our experiments, commercially available shredded plastics were procured and washed before pyrolysis. Pyrolysis it is one of the most favorable and effective disposing methods, the process is an environmentally friendly and efficient way to eliminate the effect of plastic. Pyrolysis is the thermal degradation of solid wastes at high temperatures (250- 325â) in the absence of air (and oxygen). The main process given below:
1. Identification of waste plastics. (PE/PP/PS/LDPE/HDPE)
2. Crash and cut the plastic for the pyrolysis process
3. Condensation of the gas to obtain raw fuel.
4. Collect the sample and perform tests to identify the kinds of fuel produced.
All APA Format with four citations eachEssay Question 1-575 wo.docx
All APA Format with four citations each
Essay Question 1-575 words minimum
The Case of the Oily RagsÂ
Outside of the city's Fleet Operations maintenance bays, there is a dumpster with a nicely painted sign stating âDeposit Oily Rags Here.â As the newly appointed EH&S manager for the city, you ask the next pressing question to the maintenance supervisor, âAfter you put your oily rags in the dumpster, where does the dumpster go?â His response was, âthey take them out to the power plant and burn them.â Two days later, while you are out at the power plant, you ask the operations manager about the burning of oily rags in the unit. He tells you that they used to do that, but now, with the newer changes in place from the EPA, they are not allowed to. So, you ask yet another obvious question, âThen why are these dumpsters of oily rags coming out here?â He was surprised that you mentioned it because he had been wondering that himself. Now he has four dumpsters on his property filled with oily rags.Â
¡ Should the oily rags stay on the power plant site?
¡ What responsibility does Fleet Operations have?
¡ How might this situation be different if the former city EH&S manager had collaborated with other city managers and employees?
¡ Identify the specific section of RCRA that applies to this scenario.
¡ Identify health and safety concerns that might occur if the oily rags were loaded into the incinerator.
BEM 3701, Hazardous Waste Management 1
Course Learning Outcomes for Unit VI
Upon completion of this unit, students should be able to:
5. Evaluate the efficacy of hazardous waste related mandates and programs.
6. Describe hazardous waste characteristics, pathways in the environment, and toxicological impacts.
7. Evaluate contemporary methods of hazardous waste mitigation and remediation including waste
minimization, pollution prevention, reuse, and recycling.
Reading Assignment
Chapter 18:
Universal Wastes
Chapter 19:
Management of Used Oil
Unit Lesson
Universal waste is a unique category of hazardous wastes and is comprised of the following:
ďˇ Batteries
ďˇ Pesticides
ďˇ Thermostats (mercury containing equipment)
ďˇ Certain types of light bulbs (lamps).
This waste was historically created in large quantities by businesses, households, and institutions, and the
EPA saw a need to regulate and control its disposal. To describe the requirements for both generators and
commercial consolidators of universal waste, the EPA uses the term handler. So, when dealing with universal
waste (which is a type of hazardous waste), a generator of universal waste is also a handler. A consolidator of
the waste is a handler, but not a generator. It appears that the EPA lumped both types of facilities into the
same classification to simplify the regulatory control. These items are not considered highly hazardous in the
quantities and the forms they exist in within the universal waste category. Also, the EPA classif.
Rt 2009
Presentation of Dr. Raymond Tan, DLSU, on "Sustainable Consumption and Sustainable Production" during the UP Manila Conference on Global Climate Change, October 22-23, 2009, Pearl Garden Hotel, Manila.
A REVIEW STUDY ON ACTIVATED CARBON FOR REDUCING POLLUTION
Air pollution is most important from the public health of view, because every individual person breaths approximately 22000 times a day, inhaling about 15 to 22 kg of air daily. The main pollutants contribute by automobile are carbon monoxide (CO), unburned hydrocarbon (UBHC), oxides of nitrogen (NOx) and Lead. Pollutant removal from combustion gas in both SI&CI is one of the most widely known environmental applications of activated carbons. In order to guarantee the successful removal of contaminants and pollutants on activated carbons, the developments of new adsorbents has been increasing in the last few years. This paper is a systematic study of cleaning SI&CI engine of CO, SO2, NO2 Using activated carbon filter. The combustion gases were qualitative and quantitative analyzed by gas chromatography. The use of this simple method is a valuable alternative to meet emission standards in developing countries. It was demonstrated that the agricultural wastes studied here are a feasible alternative for reducing pollutants in SI & CI engine.
Polymer and Environment -LCA (Group 6)
Overview about Life Cycle Assessment (LCA) and Case Studies related
Waste as a future feedstock - James clark
Helping to solve the problems of the depletion of many elements and the growing volumes of hazardous waste together by building closed loop design into chemicals and materials.
By James Clark, Green Chemistry Group, University of York
Monica becker turi cont ed - session c green materials for turi website
2012 presentation on Innovative Business / University Partnership: The Safer Plasticizer Assessment Project - Project for the Green Chemistry & Commerce Council (GC3)
Chiara ghiron, russell thomas exercises in synthetic organic chemistry (199...
org chemistry book notes for Masters in chemistry and life sciences students.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
More Related Content
Similar to ScienceShare.co.uk Shared Resource
Writing for publication 2017 writing an abstract
An abstract is a little text that tells the whole story of your research. It's often the only thing that a reader can access so you need to get it right. Sioux McKenna. For more on this, visit: postgradenvironments.com
De 2 a report
Design Engineering report format.(Abstract, Introduction, Acknowledgement,A-E-I-O-U SUMMARY, empathy canvases, Ideation canvas, Mind mapping, product development canvas)
BEM 3701, Hazardous Waste Management 1 Course Descriptio.docx
BEM 3701, Hazardous Waste Management 1
Course Description
An Introduction to hazardous waste management issues, programs, regulations, hazards, identification, characterization,
storage, disposal, and treatment options in the corporate, industrial, and municipal settings.
Course Textbook
Pichtel, J. (2014). Waste management practices: Municipal, hazardous, and industrial (2nd ed.). Boca Raton, FL:
CRC Press.
Course Learning Outcomes
Upon completion of this course, students should be able to:
1. Discuss the history and the legal framework surrounding hazardous waste issues.
2. Characterize the hazardous waste problem in America.
3. Describe various types of hazardous wastes, their impact on the environment, and respective environmental
control and public health remedies.
4. Evaluate relevant regulatory compliance requirements in the industrial environment.
5. Evaluate the efficacy of hazardous waste related mandates and programs.
6. Describe hazardous waste characteristics, pathways in the environment, and toxicological impacts.
7. Evaluate contemporary methods of hazardous waste mitigation and remediation including waste minimization,
pollution prevention, reuse, and recycling.
8. Evaluate safety and health efforts related to hazardous waste workers.
Credits
Upon completion of this course, the students will earn three (3) hours of college credit.
Course Structure
1. Study Guide: Each unit contains a Study Guide that provides students with the learning outcomes, unit lesson,
required reading assignments, and supplemental resources.
2. Learning Outcomes: Each unit contains Learning Outcomes that specify the measurable skills and knowledge
students should gain upon completion of the unit.
3. Unit Lesson: Each unit contains a Unit Lesson, which discusses lesson material.
4. Reading Assignments: Units I-VII contain Reading Assignments from one or more chapters from the textbook.
5. Suggested Reading: Suggested Readings are listed in the Unit II and III study guides. Students are encouraged
to read the resources listed if the opportunity arises, but they will not be tested on their knowledge of the
Suggested Readings.
6. Learning Activities (Non-Graded): The non-graded Learning Activity in Unit II is provided to aid students in their
course of study.
7. Unit Assessments: This course contains four Unit Assessments, one to be completed at the end of Units I, II, V,
and VIII. Assessments are composed of written-response questions.
8. Unit Assignments: Students are required to submit for grading Unit Assignments in Units I-IV, VI, and VII.
Specific information and instructions regarding these assignments are provided below. Grading rubrics are
included with each assignment. Specific information about accessing these rubrics is provided below.
BEM 3701, Hazardous Waste
Management
Course Syllabus
BEM 3701, Hazardous Waste Management 2
9. Ask the Professor: This ...
Benefits and Characteristics Overview of Additives
Review of additive types, benefits and characteristics
Fuel from waste plastic by pyrolysis
Fuel from waste plastic by pyrolysis
Plastic is used [ PP, HDPE, LDPE, PS] .
By :
1-Ali Jumaah Thamer
2-Ali Kadhim Morwad
3- Muslim Kareem
4-Omar Montaser
Iraq-Basra
Production Fuel From Waste Plastic By Pyrolysis (Theoretical part)
In our experiments, commercially available shredded plastics were procured and washed before pyrolysis. Pyrolysis it is one of the most favorable and effective disposing methods, the process is an environmentally friendly and efficient way to eliminate the effect of plastic. Pyrolysis is the thermal degradation of solid wastes at high temperatures (250- 325â) in the absence of air (and oxygen). The main process given below:
1. Identification of waste plastics. (PE/PP/PS/LDPE/HDPE)
2. Crash and cut the plastic for the pyrolysis process
3. Condensation of the gas to obtain raw fuel.
4. Collect the sample and perform tests to identify the kinds of fuel produced.
All APA Format with four citations eachEssay Question 1-575 wo.docx
All APA Format with four citations each
Essay Question 1-575 words minimum
The Case of the Oily RagsÂ
Outside of the city's Fleet Operations maintenance bays, there is a dumpster with a nicely painted sign stating âDeposit Oily Rags Here.â As the newly appointed EH&S manager for the city, you ask the next pressing question to the maintenance supervisor, âAfter you put your oily rags in the dumpster, where does the dumpster go?â His response was, âthey take them out to the power plant and burn them.â Two days later, while you are out at the power plant, you ask the operations manager about the burning of oily rags in the unit. He tells you that they used to do that, but now, with the newer changes in place from the EPA, they are not allowed to. So, you ask yet another obvious question, âThen why are these dumpsters of oily rags coming out here?â He was surprised that you mentioned it because he had been wondering that himself. Now he has four dumpsters on his property filled with oily rags.Â
¡ Should the oily rags stay on the power plant site?
¡ What responsibility does Fleet Operations have?
¡ How might this situation be different if the former city EH&S manager had collaborated with other city managers and employees?
¡ Identify the specific section of RCRA that applies to this scenario.
¡ Identify health and safety concerns that might occur if the oily rags were loaded into the incinerator.
BEM 3701, Hazardous Waste Management 1
Course Learning Outcomes for Unit VI
Upon completion of this unit, students should be able to:
5. Evaluate the efficacy of hazardous waste related mandates and programs.
6. Describe hazardous waste characteristics, pathways in the environment, and toxicological impacts.
7. Evaluate contemporary methods of hazardous waste mitigation and remediation including waste
minimization, pollution prevention, reuse, and recycling.
Reading Assignment
Chapter 18:
Universal Wastes
Chapter 19:
Management of Used Oil
Unit Lesson
Universal waste is a unique category of hazardous wastes and is comprised of the following:
ďˇ Batteries
ďˇ Pesticides
ďˇ Thermostats (mercury containing equipment)
ďˇ Certain types of light bulbs (lamps).
This waste was historically created in large quantities by businesses, households, and institutions, and the
EPA saw a need to regulate and control its disposal. To describe the requirements for both generators and
commercial consolidators of universal waste, the EPA uses the term handler. So, when dealing with universal
waste (which is a type of hazardous waste), a generator of universal waste is also a handler. A consolidator of
the waste is a handler, but not a generator. It appears that the EPA lumped both types of facilities into the
same classification to simplify the regulatory control. These items are not considered highly hazardous in the
quantities and the forms they exist in within the universal waste category. Also, the EPA classif.
Rt 2009
Presentation of Dr. Raymond Tan, DLSU, on "Sustainable Consumption and Sustainable Production" during the UP Manila Conference on Global Climate Change, October 22-23, 2009, Pearl Garden Hotel, Manila.
A REVIEW STUDY ON ACTIVATED CARBON FOR REDUCING POLLUTION
Air pollution is most important from the public health of view, because every individual person breaths approximately 22000 times a day, inhaling about 15 to 22 kg of air daily. The main pollutants contribute by automobile are carbon monoxide (CO), unburned hydrocarbon (UBHC), oxides of nitrogen (NOx) and Lead. Pollutant removal from combustion gas in both SI&CI is one of the most widely known environmental applications of activated carbons. In order to guarantee the successful removal of contaminants and pollutants on activated carbons, the developments of new adsorbents has been increasing in the last few years. This paper is a systematic study of cleaning SI&CI engine of CO, SO2, NO2 Using activated carbon filter. The combustion gases were qualitative and quantitative analyzed by gas chromatography. The use of this simple method is a valuable alternative to meet emission standards in developing countries. It was demonstrated that the agricultural wastes studied here are a feasible alternative for reducing pollutants in SI & CI engine.
Polymer and Environment -LCA (Group 6)
Overview about Life Cycle Assessment (LCA) and Case Studies related
Waste as a future feedstock - James clark
Helping to solve the problems of the depletion of many elements and the growing volumes of hazardous waste together by building closed loop design into chemicals and materials.
By James Clark, Green Chemistry Group, University of York
Monica becker turi cont ed - session c green materials for turi website
2012 presentation on Innovative Business / University Partnership: The Safer Plasticizer Assessment Project - Project for the Green Chemistry & Commerce Council (GC3)
Chiara ghiron, russell thomas exercises in synthetic organic chemistry (199...
org chemistry book notes for Masters in chemistry and life sciences students.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Background of this study is to analyze different kind of challenges
are facing during stability studies of the product. Significance of
this study is whether the primary Medical Packaging devices are
compatible with the product or not. Basic methodology is used
wide ranges of Analytical testing required to avoid market complaint and financial loss of the company. Major findings of the studies are to provide solutions for the respective problems in different options. Inshort this Article is going to impact hugely those
are working in R&D and production line as well.
Similar to ScienceShare.co.uk Shared Resource (20)
BEM 3701, Hazardous Waste Management 1 Course Descriptio.docx
BEM 3701, Hazardous Waste Management 1 Course Descriptio.docx
Â
Benefits and Characteristics Overview of Additives
Benefits and Characteristics Overview of Additives
Â
Production Fuel From Waste Plastic By Pyrolysis (Theoretical part)
Production Fuel From Waste Plastic By Pyrolysis (Theoretical part)
Â
All APA Format with four citations eachEssay Question 1-575 wo.docx
All APA Format with four citations eachEssay Question 1-575 wo.docx
Â
A REVIEW STUDY ON ACTIVATED CARBON FOR REDUCING POLLUTION
A REVIEW STUDY ON ACTIVATED CARBON FOR REDUCING POLLUTION
Â
Monica becker turi cont ed - session c green materials for turi website
Monica becker turi cont ed - session c green materials for turi website
Â
Essential Biology 03.2 Carbohydrates, Lipids and Proteins
Essential Biology 03.2 Carbohydrates, Lipids and Proteins
Â
Chiara ghiron, russell thomas exercises in synthetic organic chemistry (199...
Chiara ghiron, russell thomas exercises in synthetic organic chemistry (199...
Â
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Â
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Â
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Â
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Drug Discoveries and Challenges for Polymeric Medical Packaging Devices
Â
More from ScienceShare.co.uk
More from ScienceShare.co.uk (20)
ScienceShare.co.uk Shared Resource
- 1. Learners Signature Internal Verifiers Name and Comment Summary Assessorâs Feedback Grading Criteria Investigate and describe the use of three main types of organic compounds used in society. Explain the benefits and disadvantages of using organic compounds in society Evaluate the importance of organic compounds used in society Unit 3 P5 ⥠M5⥠D5 ⥠Assessment Evidence: Your research will help journalists and the general public understand the importance of organic chemistry This will come from completing the tasks but you may wish to include any extra information that you find. How you present your work is up to you, but you should discuss this with your teacher. Remember to list any websites or books you have used in a bibliography Hand in Date: Start Date: Assignment: 3.4 Unit: 3 Tutor Name: Name: Candidate Number: Course: BTEC First Certificate/Diploma Applied Science St Ivo Science Centre ID: 22223