S7 seminar topics
•Download as DOCX, PDF•
2 likes•782 views
The document outlines 50 potential seminar topics related to process dynamics and control, including: 1) Raw materials and products of a major Indian oil refinery 2) Sophisticated technologies used at the refinery 3) Operation of distillation columns and challenges in petroleum refining It also provides guidelines for presentations on the topics, advising students to prepare 5-10 minute PowerPoint presentations with 2 page maximum handouts and reference materials. Presentations should be ready to deliver at any time.
Report
Share
Report
Share
Recommended
Nanomaterials invitation
This document proposes a five day workshop on designing low-cost nanomaterial-based sensors for internet of things applications. The workshop will be held from April 2-6, 2018 with 30 TEQIP faculty participants. It will be organized by Dr. Amit Acharyya, Dr. Sushmee Badhulika, and Dr. Ashudeb Dutta from IITH, along with one foreign or Indian expert. The workshop aims to provide an introduction to flexible substrate-based nanosensors, detection techniques, interfacing techniques, and digital system design aspects. Topics to be covered include flexible electronics, sensor fundamentals, nano sensor materials, sensor design processes, sensing interface design, applications of digital signal processing
Ieee 2020 21 iot in pondicherry,final year projects in pondicherry,project ce...
Nexgen Technology Address:
Nexgen Technology
No :66,4th cross,Venkata nagar,
Near SBI ATM,
Puducherry.
Email Id: mailtonexgentech@gmail.com.
www.nexgenproject.com
Mobile: 9791938249,9025656779
NEXGEN TECHNOLOGY as an efficient Software Training Center located at Pondicherry with IT Training on IEEE Projects in Android,IEEE IT B.Tech Student Projects, Android Projects Training with Placements Pondicherry, IEEE projects in pondicherry, final IEEE Projects in Pondicherry , MCA, BTech, BCA Projects in Pondicherry, Bulk IEEE PROJECTS IN Pondicherry.So far we have reached almost all engineering colleges located in Pondicherry and around 90km
Industrial Pioneers Days - Machine Learning
VEDLIoT presentation at Industrial Pioneers Days OWL – Machine Learning by Jens Hagemeyer and Carola Haumann
April 20, 2021
Review of Wireless Sensor Networks
This article presents a study of the state of the art of sensor networks wireless systems, which continue to develop and present a wide variety of Applications. These networks constitute a current and emerging field of study where combines the development of computers, wireless communications and devices mobile phones and integration with other disciplines such as agriculture, biology, medicine, etc. I know presents the main concept, components, topologies, standards, applications, problems and challenges, then delves into security solutions and concludes with basic simulation tools.
MicazXpl Intelligent Sensors Network Project Presentation
This document provides an introduction to sensor networks and the Micaz sensor board. It discusses the overview and fields of application of sensor networks, including home applications, environment applications, and military applications. It also discusses the software and hardware components of the Micaz sensor board. The document outlines the project approach, including tutorials, research papers, documentation and application development. It proposes projects related to data transmission methods and improving availability. It concludes with a bibliography.
Arduino IOT Projects
ECLECTIC CONTENT IN ARDUINO IOT PROJECTS
LATEST OUTLOOK IN ARDUINO IOT PROJECTS
UBIQUITOUS TITLES IN ARDUINO IOT PROJECTS
AccML, co-located with HiPEAC 2021_Pedro Trancoso presentation
VEDLIoT is a project that aims to develop a framework for the next generation internet of things (IoT) based on IoT devices that collaboratively solve complex deep learning applications across distributed systems. The project will improve the performance and cost ratio of AI processing by distributing hardware across the entire chain from embedded devices to the cloud. It will also increase the safety, health and well-being of users through accelerating AI methods for user-home interaction. The project will develop a cognitive IoT platform, deep learning toolchain, and DL accelerators to enable this vision over its three year timeline starting in November 2020.
Sumita
This document presents information on process analytical technology (PAT) for pharmaceutical development, manufacturing, and quality assurance. It discusses the definition, principles, goals, framework, tools, and implementation of PAT. Case studies are provided that demonstrate how PAT tools like in-situ FTIR, Raman spectroscopy, and chemical imaging can be used for reaction monitoring, crystallization, granulation, blending, and identification of raw materials. Barriers to PAT implementation include historical, cultural, organizational challenges but benefits include reduced cycle times, prevention of rejects, continuous improvement, and real-time release. PAT facilitates building quality into pharmaceutical products through process understanding.
Recommended
Nanomaterials invitation
This document proposes a five day workshop on designing low-cost nanomaterial-based sensors for internet of things applications. The workshop will be held from April 2-6, 2018 with 30 TEQIP faculty participants. It will be organized by Dr. Amit Acharyya, Dr. Sushmee Badhulika, and Dr. Ashudeb Dutta from IITH, along with one foreign or Indian expert. The workshop aims to provide an introduction to flexible substrate-based nanosensors, detection techniques, interfacing techniques, and digital system design aspects. Topics to be covered include flexible electronics, sensor fundamentals, nano sensor materials, sensor design processes, sensing interface design, applications of digital signal processing
Ieee 2020 21 iot in pondicherry,final year projects in pondicherry,project ce...
Nexgen Technology Address:
Nexgen Technology
No :66,4th cross,Venkata nagar,
Near SBI ATM,
Puducherry.
Email Id: mailtonexgentech@gmail.com.
www.nexgenproject.com
Mobile: 9791938249,9025656779
NEXGEN TECHNOLOGY as an efficient Software Training Center located at Pondicherry with IT Training on IEEE Projects in Android,IEEE IT B.Tech Student Projects, Android Projects Training with Placements Pondicherry, IEEE projects in pondicherry, final IEEE Projects in Pondicherry , MCA, BTech, BCA Projects in Pondicherry, Bulk IEEE PROJECTS IN Pondicherry.So far we have reached almost all engineering colleges located in Pondicherry and around 90km
Industrial Pioneers Days - Machine Learning
VEDLIoT presentation at Industrial Pioneers Days OWL – Machine Learning by Jens Hagemeyer and Carola Haumann
April 20, 2021
Review of Wireless Sensor Networks
This article presents a study of the state of the art of sensor networks wireless systems, which continue to develop and present a wide variety of Applications. These networks constitute a current and emerging field of study where combines the development of computers, wireless communications and devices mobile phones and integration with other disciplines such as agriculture, biology, medicine, etc. I know presents the main concept, components, topologies, standards, applications, problems and challenges, then delves into security solutions and concludes with basic simulation tools.
MicazXpl Intelligent Sensors Network Project Presentation
This document provides an introduction to sensor networks and the Micaz sensor board. It discusses the overview and fields of application of sensor networks, including home applications, environment applications, and military applications. It also discusses the software and hardware components of the Micaz sensor board. The document outlines the project approach, including tutorials, research papers, documentation and application development. It proposes projects related to data transmission methods and improving availability. It concludes with a bibliography.
Arduino IOT Projects
ECLECTIC CONTENT IN ARDUINO IOT PROJECTS
LATEST OUTLOOK IN ARDUINO IOT PROJECTS
UBIQUITOUS TITLES IN ARDUINO IOT PROJECTS
AccML, co-located with HiPEAC 2021_Pedro Trancoso presentation
VEDLIoT is a project that aims to develop a framework for the next generation internet of things (IoT) based on IoT devices that collaboratively solve complex deep learning applications across distributed systems. The project will improve the performance and cost ratio of AI processing by distributing hardware across the entire chain from embedded devices to the cloud. It will also increase the safety, health and well-being of users through accelerating AI methods for user-home interaction. The project will develop a cognitive IoT platform, deep learning toolchain, and DL accelerators to enable this vision over its three year timeline starting in November 2020.
Sumita
This document presents information on process analytical technology (PAT) for pharmaceutical development, manufacturing, and quality assurance. It discusses the definition, principles, goals, framework, tools, and implementation of PAT. Case studies are provided that demonstrate how PAT tools like in-situ FTIR, Raman spectroscopy, and chemical imaging can be used for reaction monitoring, crystallization, granulation, blending, and identification of raw materials. Barriers to PAT implementation include historical, cultural, organizational challenges but benefits include reduced cycle times, prevention of rejects, continuous improvement, and real-time release. PAT facilitates building quality into pharmaceutical products through process understanding.
General Electric Overview Presentation of TRIZ Deployment presented to NASA-t...
This is a presentation by Oliver Mayer from General Electric, made back in October 2014 to NASA on their deployment of TRIZ as a part of the Innovation capabilities they had developed and deployed internally.
The 5th Aslla Symposium
This document discusses Industry 4.0 use cases developed by researchers at Ghent University and IMEC. It introduces four use cases: 1) wind turbine condition monitoring using predictive models to detect anomalies, 2) incipient bearing fault detection using vibration and thermal data, 3) anomaly detection in steel coil production using metrics to predict faults, and 4) greenhouse condition monitoring using sensor data and imaging to optimize plant growth. The researchers develop machine learning models for predictive maintenance and performance monitoring across various industrial domains.
Rathinasabapathy
Rathinasabapathy K is seeking a challenging position applying over 10 years of experience in hardware design, development, and testing. He has expertise in analog and mixed signal design, hardware development lifecycles, and working with cross-functional teams. Some of his projects include flame detector design for EN54 certification, patient monitoring systems, surge protection devices, and automatic test equipment for aircraft radar warning receivers. He is proficient in various hardware design and simulation tools.
Sensor-based, Data-driven Optimization of Composites Manufacturing.pptx
This is the presentation of the speech of Dr. Nicholas Ecke at SAMPE Europe Conference Madrid 2023.
Plastics manufacturing can be unpredictable. Deviations in material batches, moisture content, machine calibration, among other variables, lead to issues in manufacturing quality and final part properties.
New technology has been developed to combine dielectric analysis with machine learning and material models, allowing for dynamic adjustments to machine settings, removing uncertainty from your process, and optimizing cycle times.
Mech electives
This document provides information on elective courses for mechanical engineering students at Anna University in Chennai, India. It lists 14 elective courses for the 6th semester, including Unconventional Machining Processes, Marketing Management, and Refrigeration and Air Conditioning. It also lists 7 elective courses for the 7th semester and 10 elective courses for the 8th semester on topics such as Robotics, Composite Materials, and Operations Research.
07-ENGINEERING_DESIGN_GUIDELINES_instrumentation_sizing_and_selection_rev_web...
This document provides an overview of instrumentation selection and sizing for industrial process systems. It discusses common instrumentation used for measuring process variables like pressure, level, and temperature. Measurement devices covered include pressure gauges, level gauges, thermocouples, and transmitters. The document also reviews control systems and modes, including on-off, proportional, PI, PD, and PID control. Examples of instrumentation schematics for fractionation towers are provided. The guideline aims to aid engineers in preliminary instrumentation design and selection for process applications.
SOS Training Brochure
This document lists 31 courses related to data communications and networking. The course titles cover topics such as industrial data communications, fiber optics, fieldbus and device networks, Ethernet, TCP/IP, networking technologies, troubleshooting industrial networks, and the application of software like Excel, Word and PowerPoint. The courses are numbered from DCN01 to DCN31 and each has a unique reference number.
Cener 2010 English
The National Renewable Energy Centre (CENER) presented its strategic plan to become a leading research center in renewable energy. Key aspects of the plan include developing new technologies in wind, solar, biomass and biofuels. CENER aims to increase its international presence, build large testing infrastructure like a wind turbine test laboratory, and partner with industry to transfer knowledge and boost sustainable energy development. CENER's budget is €22.5 million annually with plans for new research projects, facilities, and international collaboration.
BUILD A ROOM TEMPERATURE MEASURMENT CIRCUIT USING MICROCONTROLLER.pptx
Micro-Controller And Applications in BUILD A ROOM TEMPERATURE MEASURMENT CIRCUIT USING MICROCONTROLLER
Endothermic Process Monitoring and Control using IIOT
This document describes a system to monitor carbon monoxide (CO) levels in endothermic industrial processes in real-time using the Industrial Internet of Things (IIoT). A CO sensor will detect CO levels which an ARM microcontroller will process into parts per million. An ESP32 will transmit the data via MQTT protocol to a server or cloud for remote monitoring. The system aims to warn of toxic gas leaks, detect equipment issues, and allow for energy savings through real-time visibility of process parameters. It could be applied to industries like furnaces, forging, and oil and gas to help ensure worker safety and process efficiency.
AML4DT: A Model-Driven Framework for Developing and Maintaining Digital Twin...
The AML4DT Framework to automatically generate Digital Twins in Microsoft Azure from AutomationML models.
Presented at ETFA2021.
Test Plan Development using Physics of Failure: The DfR Solutions Approach
This document discusses using physics of failure (PoF) methodology to develop optimized test plans that are tailored to a product's specific design, materials, use environment, and reliability needs. It provides an overview of key aspects of test plan development including defining reliability goals and the use environment, identifying failure inducing loads, developing a comprehensive test plan, and ensuring change control processes and ongoing reliability testing are in place. The document also presents a case study of how PoF modeling was used to develop a test plan for microinverters intended for a 25-year lifespan in harsh outdoor solar installations.
Tru Process
The document describes the Thermo Scientific TruProcess Near Infrared Analyzer. It is a non-contact process analyzer that uses near infrared spectroscopy to monitor industrial processes in real-time. Key features include fast and accurate measurements, wireless data transmission, compatibility with custom method development software, and a durable design suitable for industrial environments. The analyzer can be used to monitor various processes such as blending, drying, and moisture analysis.
Visitor counter
This document presents a digital visitor counter project by four students from the ECE department of Greater Kolkata College of Engineering and Management. The project uses sensors and a microcontroller to detect people entering and exiting a room and displays the count on an LCD screen. It works by using IR sensors to detect motion and an AT89C52 microcontroller to process the sensor signals and control the LCD display. The document discusses the components, working principle, applications and advantages of the digital visitor counter.
Resume_Instrumentation Engineer_7.5 year experience
- Over 7 years of experience as an Instrument Manager at Reliance Industries Ltd in Vadodara, Gujarat, with expertise in DCS, PLC, and SCADA systems including Honeywell, Allen Bradley, and Siemens.
- Responsibilities include maintenance, testing, troubleshooting, and overseeing installation and commissioning of instrumentation.
- Holds a B.Tech in Electronics and Instrumentation from Shobhit Institute of Engineering and Technology.
Industrial processes
This document outlines the course information for an Industrial Processes course. The course code is ME 218 and it deals with studying industrial and manufacturing processes and equipment. The objectives are for students to understand different processes, know the equipment used, and assess safety practices. Students will complete group reports, a group project on developing an innovative product, take quizzes and exams. The grading system and schedule are outlined.
120214 frost & sullivan technology vision 2020 web
This TechVision 2020 report from Frost & Sullivan identifies the top 50 emerging technologies that will impact the world over the next decade. The technologies are spread across nine technology clusters. The report is the result of research and analysis conducted by over 50 analysts across six continents, including interviews with innovators and developers. It provides details on each technology's R&D footprint, impact timeline, patenting and funding trends to identify those most poised for widespread adoption and commercialization. The top 50 technologies selected have the highest potential to be widely launched and commercially successful by 2020.
Continuous manufacturing technology
A basic concept of flow chemistry technology using continuous reactors in API manufacturing companies.
SPAM_CDR_Presentation
This document summarizes a critical design review for a project to develop an additive manufacturing system for printing solid rocket propellant. It outlines the project background, functional requirements, critical elements, and safety considerations. Key aspects of the design include the laser system selection, thermal modeling of the sintering process, powder bed subsystem, and implementation of safety systems to address the fire and explosion risks of the propellant materials. The goal is to 3D print complex grain shapes for solid rocket motors and compare the mechanical properties to those of traditionally cast propellant.
MATLAB and DCS integration of Spray Drier.
The document provides information about a project presentation on MATLAB and DCS integration with a pilot plant. It discusses a spray dryer project conducted by team members Siddhi Jagdale, Sanskruti Gaulkar, Omkar Jagdale, and Ketan Firke under the guidance of S.R. Patil. The content sections cover the working, process, plant network, hardware, and software used for the spray dryer, including specifications of its components, a ControlLogix PLC system, sensors, VFDs, pumps, and programming software like RSLogix5000, RSView32 Works SCADA, and DeltaV Explorer. It also describes an advance control strategy using cascade control to improve efficiency
More Related Content
Similar to S7 seminar topics
General Electric Overview Presentation of TRIZ Deployment presented to NASA-t...
This is a presentation by Oliver Mayer from General Electric, made back in October 2014 to NASA on their deployment of TRIZ as a part of the Innovation capabilities they had developed and deployed internally.
The 5th Aslla Symposium
This document discusses Industry 4.0 use cases developed by researchers at Ghent University and IMEC. It introduces four use cases: 1) wind turbine condition monitoring using predictive models to detect anomalies, 2) incipient bearing fault detection using vibration and thermal data, 3) anomaly detection in steel coil production using metrics to predict faults, and 4) greenhouse condition monitoring using sensor data and imaging to optimize plant growth. The researchers develop machine learning models for predictive maintenance and performance monitoring across various industrial domains.
Rathinasabapathy
Rathinasabapathy K is seeking a challenging position applying over 10 years of experience in hardware design, development, and testing. He has expertise in analog and mixed signal design, hardware development lifecycles, and working with cross-functional teams. Some of his projects include flame detector design for EN54 certification, patient monitoring systems, surge protection devices, and automatic test equipment for aircraft radar warning receivers. He is proficient in various hardware design and simulation tools.
Sensor-based, Data-driven Optimization of Composites Manufacturing.pptx
This is the presentation of the speech of Dr. Nicholas Ecke at SAMPE Europe Conference Madrid 2023.
Plastics manufacturing can be unpredictable. Deviations in material batches, moisture content, machine calibration, among other variables, lead to issues in manufacturing quality and final part properties.
New technology has been developed to combine dielectric analysis with machine learning and material models, allowing for dynamic adjustments to machine settings, removing uncertainty from your process, and optimizing cycle times.
Mech electives
This document provides information on elective courses for mechanical engineering students at Anna University in Chennai, India. It lists 14 elective courses for the 6th semester, including Unconventional Machining Processes, Marketing Management, and Refrigeration and Air Conditioning. It also lists 7 elective courses for the 7th semester and 10 elective courses for the 8th semester on topics such as Robotics, Composite Materials, and Operations Research.
07-ENGINEERING_DESIGN_GUIDELINES_instrumentation_sizing_and_selection_rev_web...
This document provides an overview of instrumentation selection and sizing for industrial process systems. It discusses common instrumentation used for measuring process variables like pressure, level, and temperature. Measurement devices covered include pressure gauges, level gauges, thermocouples, and transmitters. The document also reviews control systems and modes, including on-off, proportional, PI, PD, and PID control. Examples of instrumentation schematics for fractionation towers are provided. The guideline aims to aid engineers in preliminary instrumentation design and selection for process applications.
SOS Training Brochure
This document lists 31 courses related to data communications and networking. The course titles cover topics such as industrial data communications, fiber optics, fieldbus and device networks, Ethernet, TCP/IP, networking technologies, troubleshooting industrial networks, and the application of software like Excel, Word and PowerPoint. The courses are numbered from DCN01 to DCN31 and each has a unique reference number.
Cener 2010 English
The National Renewable Energy Centre (CENER) presented its strategic plan to become a leading research center in renewable energy. Key aspects of the plan include developing new technologies in wind, solar, biomass and biofuels. CENER aims to increase its international presence, build large testing infrastructure like a wind turbine test laboratory, and partner with industry to transfer knowledge and boost sustainable energy development. CENER's budget is €22.5 million annually with plans for new research projects, facilities, and international collaboration.
BUILD A ROOM TEMPERATURE MEASURMENT CIRCUIT USING MICROCONTROLLER.pptx
Micro-Controller And Applications in BUILD A ROOM TEMPERATURE MEASURMENT CIRCUIT USING MICROCONTROLLER
Endothermic Process Monitoring and Control using IIOT
This document describes a system to monitor carbon monoxide (CO) levels in endothermic industrial processes in real-time using the Industrial Internet of Things (IIoT). A CO sensor will detect CO levels which an ARM microcontroller will process into parts per million. An ESP32 will transmit the data via MQTT protocol to a server or cloud for remote monitoring. The system aims to warn of toxic gas leaks, detect equipment issues, and allow for energy savings through real-time visibility of process parameters. It could be applied to industries like furnaces, forging, and oil and gas to help ensure worker safety and process efficiency.
AML4DT: A Model-Driven Framework for Developing and Maintaining Digital Twin...
The AML4DT Framework to automatically generate Digital Twins in Microsoft Azure from AutomationML models.
Presented at ETFA2021.
Test Plan Development using Physics of Failure: The DfR Solutions Approach
This document discusses using physics of failure (PoF) methodology to develop optimized test plans that are tailored to a product's specific design, materials, use environment, and reliability needs. It provides an overview of key aspects of test plan development including defining reliability goals and the use environment, identifying failure inducing loads, developing a comprehensive test plan, and ensuring change control processes and ongoing reliability testing are in place. The document also presents a case study of how PoF modeling was used to develop a test plan for microinverters intended for a 25-year lifespan in harsh outdoor solar installations.
Tru Process
The document describes the Thermo Scientific TruProcess Near Infrared Analyzer. It is a non-contact process analyzer that uses near infrared spectroscopy to monitor industrial processes in real-time. Key features include fast and accurate measurements, wireless data transmission, compatibility with custom method development software, and a durable design suitable for industrial environments. The analyzer can be used to monitor various processes such as blending, drying, and moisture analysis.
Visitor counter
This document presents a digital visitor counter project by four students from the ECE department of Greater Kolkata College of Engineering and Management. The project uses sensors and a microcontroller to detect people entering and exiting a room and displays the count on an LCD screen. It works by using IR sensors to detect motion and an AT89C52 microcontroller to process the sensor signals and control the LCD display. The document discusses the components, working principle, applications and advantages of the digital visitor counter.
Resume_Instrumentation Engineer_7.5 year experience
- Over 7 years of experience as an Instrument Manager at Reliance Industries Ltd in Vadodara, Gujarat, with expertise in DCS, PLC, and SCADA systems including Honeywell, Allen Bradley, and Siemens.
- Responsibilities include maintenance, testing, troubleshooting, and overseeing installation and commissioning of instrumentation.
- Holds a B.Tech in Electronics and Instrumentation from Shobhit Institute of Engineering and Technology.
Industrial processes
This document outlines the course information for an Industrial Processes course. The course code is ME 218 and it deals with studying industrial and manufacturing processes and equipment. The objectives are for students to understand different processes, know the equipment used, and assess safety practices. Students will complete group reports, a group project on developing an innovative product, take quizzes and exams. The grading system and schedule are outlined.
120214 frost & sullivan technology vision 2020 web
This TechVision 2020 report from Frost & Sullivan identifies the top 50 emerging technologies that will impact the world over the next decade. The technologies are spread across nine technology clusters. The report is the result of research and analysis conducted by over 50 analysts across six continents, including interviews with innovators and developers. It provides details on each technology's R&D footprint, impact timeline, patenting and funding trends to identify those most poised for widespread adoption and commercialization. The top 50 technologies selected have the highest potential to be widely launched and commercially successful by 2020.
Continuous manufacturing technology
A basic concept of flow chemistry technology using continuous reactors in API manufacturing companies.
SPAM_CDR_Presentation
This document summarizes a critical design review for a project to develop an additive manufacturing system for printing solid rocket propellant. It outlines the project background, functional requirements, critical elements, and safety considerations. Key aspects of the design include the laser system selection, thermal modeling of the sintering process, powder bed subsystem, and implementation of safety systems to address the fire and explosion risks of the propellant materials. The goal is to 3D print complex grain shapes for solid rocket motors and compare the mechanical properties to those of traditionally cast propellant.
MATLAB and DCS integration of Spray Drier.
The document provides information about a project presentation on MATLAB and DCS integration with a pilot plant. It discusses a spray dryer project conducted by team members Siddhi Jagdale, Sanskruti Gaulkar, Omkar Jagdale, and Ketan Firke under the guidance of S.R. Patil. The content sections cover the working, process, plant network, hardware, and software used for the spray dryer, including specifications of its components, a ControlLogix PLC system, sensors, VFDs, pumps, and programming software like RSLogix5000, RSView32 Works SCADA, and DeltaV Explorer. It also describes an advance control strategy using cascade control to improve efficiency
Similar to S7 seminar topics (20)
General Electric Overview Presentation of TRIZ Deployment presented to NASA-t...
General Electric Overview Presentation of TRIZ Deployment presented to NASA-t...
Sensor-based, Data-driven Optimization of Composites Manufacturing.pptx
Sensor-based, Data-driven Optimization of Composites Manufacturing.pptx
07-ENGINEERING_DESIGN_GUIDELINES_instrumentation_sizing_and_selection_rev_web...
07-ENGINEERING_DESIGN_GUIDELINES_instrumentation_sizing_and_selection_rev_web...
BUILD A ROOM TEMPERATURE MEASURMENT CIRCUIT USING MICROCONTROLLER.pptx
BUILD A ROOM TEMPERATURE MEASURMENT CIRCUIT USING MICROCONTROLLER.pptx
Endothermic Process Monitoring and Control using IIOT
Endothermic Process Monitoring and Control using IIOT
AML4DT: A Model-Driven Framework for Developing and Maintaining Digital Twin...
AML4DT: A Model-Driven Framework for Developing and Maintaining Digital Twin...
Test Plan Development using Physics of Failure: The DfR Solutions Approach
Test Plan Development using Physics of Failure: The DfR Solutions Approach
Resume_Instrumentation Engineer_7.5 year experience
Resume_Instrumentation Engineer_7.5 year experience
120214 frost & sullivan technology vision 2020 web
120214 frost & sullivan technology vision 2020 web
S7 seminar topics
- 1. S7 AEI - PROCESS DYNAMICS AND CONTROL SEMINAR TOPICS 1 Raw materials and products of Reliance Jamnagar Refinery complex 2 Sophisticated and advanced technologies used in Reliance Jamnagar Refinery 3 Working of Distillation column (Binary distillation) 4 Fractional distillation and difficulties in petroleum refining 5 Various petroleum products and its applications 6 Operation and working of Reactor – CSTR (continuously stirred tank reactor) 7 Working of heat exchangers; various types 8 Process integration and pinch technology 9 Future of petroleum, Energy peak, sweet and sour crude, available and existing reserves 10 Structure of Engineering project development (design of plant to sale of product) 11 ## Operation and working of waste water treatment plant at SJCET 12 Manufacturing process of tyres 13 Operation of steel plant : cold and hot processes(thickness control explain) 14 Electrical and pneumatic transmission 15 HART protocol 16 FIELDBUS (Foundation Fieldbus) 17 PROFIBUS 18 Sensor networks 19 Cloud computing and wireless sensors 20 Soft sensors 21 Smart and Intelligent Instruments 22 PLC 23 DCS 24 SCADA 25 Environmental auditing, Role of process engineers in environment conservation 26 Green Energy concept 27 Advancement in modern and new energy sources (replacement of conventional energy ) 28 ##Industrial solid waste management 29 Safety in industry : Safety check lists 30 Acceptable risk and safety priorities 31 Hazard and operability studies 32 Dow fire and explosion index 33 Major hazards in process industries (1) 34 Major hazards in process industries (2) 35 Hydro - Power plant operation and analysis 36 Thermal Power plant operation and analysis 37 Nuclear power plant working and operation 38 Supporting facts for more Nuclear plants 39 Safety concerns and negatives of nuclear energy 40 Patent : patent rules in India and US
- 2. 41 ##RS 232 Communication 42 ##RS 485 Communication 43 Working and operations in an ammonia plant 44 MEMS (Micro Electro Mechanical System) and its application as sensors 45 Main vendors in Automation, control and instrumentation and their products, standards 46 Chemical and Bio sensors 47 Unstable systems : stealth fighter 48 Working and application of Gyroscope 49 Examples of optimization from environment (e.g. Bee colony ….) 50 What process control students should learn? GUIDELINES: 1) Prepare power point presentation for 5 to 10 minutes and be ready to present at any time. 2) Prepare handout of the presentation in not more 2 pages and submit before presentation. 3) Keep the soft copies of PPT, handout and other reference material in a folder and submit to representative. 4) Representative should collect materials from each, and give back to all. All the best!!