1. Rubber Tank Punched Stripping Seals
GLOBAL SEALING SYSTEMS is Rubber Rolls & Rubber Molded Parts professionally
producing and selling company. One of our main products, Tank stripping gaskets are slit-to-
width rolls of rubber with holes punched at precise uniform intervals, perfectly suited to
sealing between bolted or riveted panels of medium to large sized tanks. GSSK equipped to
manufacture virtually any type of rubber, any width, and any holes size or spacing
configuration.
Available Materials
Popular varieties include Neoprene for general purpose, Nitrile Rubber (Buna-N) for
petroleum products, FDA approved white Nitrile is also good for general purpose food and
medical products storage. EPDM is superior weather resistance and a good economical
general purpose tank sealing material. Silicone rubber is suitable for both low and high
temperature extremes as well as food and medical products and Viton ยฎ are suitable for both
high temperatures and chemically volatile environments.
Rubber Gasket Seals
Another feature GSSK offers is cloth inserted rubber tank stripping and available in
numerous insert options. We can also manufacture punched tank stripping out of sponge
rubber, foam, plastic and various non-rubber gasket sheeting materials.
Available Sizes
Thickness
Average thickness for punching is between 1/16"~1/4"(1.6mm~6.4mm) for most tank sealing
applications. However this is not a limitation and GSSK easily apply the same processes to
thinner and thicker varieties of rubber and other materials.
Hole Shapes, Sizes, and Spacing
2. GSSK can manufacture virtually any holes pattern, and can even supply oval, square, or
alternate shaped holes. Of course, all rubber materials are available in slit-to-width rolls
without any holes, as well.
Seal Length & Width
Tank stripping is usually sold by uncut roll size, which varies by thickness and variety
between 25 and 300 foot lengths. Naturally, we can generally cater to special requirements
on roll length.
Dimensional Tolerances
Tolerances vary according to material and dimension specifications, but typically runs
around +/- .015 inches on key dimensions like width and hole diameter.
Rubber Tank Punched Stripping Seals
ใ๊ธ๋ก๋ฒ ์ฐ๋ง ์์คํ ์ ๊ณ ๋ฌด ์ํธ์ ๊ณ ๋ฌด ๋ชฐ๋ ์ ํ ์์ฐ ๋ฐ ํ๋งค ์ ๋ฌธํ์ฌ ์ ๋๋ค.
๊ท์ฌ์ ์ฃผ์ ์ ํ ์ค ํ๋์ธ ํฑํฌ ์คํธ๋ฆฝ ๊ฐ์ค์ผ์ ๋กค์ ์ข์ ํญ์ผ๋ก ์ฌ๋จํ์ฌ ์ผ์ ํ
๊ฐ๊ฒฉ์ผ๋ก ํ์นญ ๊ตฌ๋ฉ์ ๋ธ ์ ํ์ ๋๋ค. ์ด ๊ฐ์ค์ผ์ ๋ณผํธ๋ฅผ ์กฐ์ด๊ฑฐ๋ ๊ณ ์ ์ํค๋ ํฑํฌ์
๋ชธ์ฒด์ ๋๊ป ์ฌ์ด์ ์ก์ฒด์ ํ๋ฆ ๋ฐฉ์ง๋ฅผ ์ํด ์ฐ์ด๋ฉฐ ํฑํฌ์ ์ค๊ฐ๊ท๊ฒฉ๋ถํฐ ํฐ ์ฌ์ด์ฆ๊น
์ง ์ฌ์ฉ๋ฉ๋๋ค. ๊ท์ฌ๋ ์ด๋ ํ ๊ณ ๋ฌด์ฌ์ง, ์ด๋ ํ ํญ, ์ด๋ ํ ๊ตฌ๋ฉ ์ฌ์ด์ฆ๋ ๊ฐ๊ฒฉ์ ๋กค๋
์์ฐ ๊ฐ๋ฅํ ์ฅ๋น๋ฅผ ๊ฐ์ถ๊ณ ์์ต๋๋ค.
ํ์นญ ๊ฐ๋ฅํ ๊ณ ๋ฌด ์ฌ์ง
์ผ๋ฐ์ ์ผ๋ก ๋ค์คํ๋ ์ ๋ฒ์ฉ์ ์ผ๋ก ์ฐ์ด๋ฉฐ, ๋ํธ๋ฆด์ ์์ ์ ํ์, FDA ์น์ธ ๋ฐฑ์
๋ํธ๋ฆด์ ์์๊ด๋ จ ์ ํ๊ณผ ์๋ฃ ์ ํ์ ์ผ๋ฐ์ ์ผ๋ก ์ฌ์ฉ๋ฉ๋๋ค.
์ดํผ๋์ ์ ๋ดํ์ฑ์ ์ฐ์ํ๊ณ ๊ฒฝ์ ์ ์ด๋ฉฐ ์ผ๋ฐ์ ์ผ๋ก ํฑํฌ ๋ฐ๋ด ์ฌ์ง๋ก ์ฐ์ ๋๋ค.
์ค๋ฆฌ์ฝ์ ๋์จ, ๊ณ ์จ์ ๋ ๋ค ์ ๊ฒฌ๋๋ฉฐ ์์๊ด๋ จ์ ํ, ์ํ ์ ํ์ ์ฉ๋๋ก ์ฌ์ฉ๋๋ฉฐ
๋ฐ์ดํค์ ๊ณ ์จ์ ์ ๊ฒฌ๋๋ฉฐ ํํ์์ฉ์ผ๋ก ์ธํ ๋ณํ๊ฐ ์ฌํ ํ๊ฒฝ์ ์ข์ต๋๋ค.
๊ณ ๋ฌด ๊ฐ์ค์ผ ์ฐ
๋ ๋ค๋ฅธ ํน์ง์ผ๋ก ๊ณ ๋ฌด ํฌ์ ์ผ๋ก๋ ์์ฐ ๊ฐ๋ฅํ๋ฉฐ ๊ด๋ฒ์ํ๊ฒ ํฌ์ ์ ์ ํ์ด