Ripple P Fix is Polyester Styrene Free Chemical anchor is specifically formulated to provide fast curing and loading times for most demanding structural and non-structural applications in concrete and masonry Ripple P Fix available in three variants 1. Ripple P Fix EC is designed to use in extreme cold conditions where base material temperature 2. Ripple P Fix FS is designed with fast setting formations which allows 2 minutes working time 3. Ripple P Fix most suitable for tropical climatic conditions such as India/ME continents – Available in India Ripple P Fix being Polyester based resin mortar based is used in hammer drilled holes and are suitable for extreme loads. The system is based on adhesion principle. The resulting bond is stronger than the base material, no additional load stress imparted to the base material in comparison with expansion type anchors and are therefore ideal for close to edge fixing, reduced center, group anchoring. Installation temperature of Ripple P Fix

1. I n d i a
TM
I n d i a
TM
Multi-Purpose Polyester
Styrene Free Chemical Anchoring System
India India
Installation Parameters
Content: 410 ml
80 mm
Embedment
Depth (std)
Torque
Moment
Characteristic
Load
Drill Hole
Ø
Anchor
Ø
90 mm
110 mm
128 mm
170 mm
210 mm
10 Nm
20 Nm
40 Nm
80 Nm
150 Nm
200 Nm
17 kN
22 kN
37 kN
57 kN
85 kN
118 kN
10 mm
12 mm
14 mm
18 mm
22 mm
26 mm
M8
M10
M12
M16
M20
M24
• Multi-purpose and high performance
anchoring system for use in concrete,
masonry and other substrates
• For use at temperatures of up to 45°C
• Applications in dry wet & flooded holes
• Reduced drilling diameters
• Increased nozzle life
Installation Procedure
1 3 5
x2
2 4 6
x2
MIN
50%
8* 97
8* - Note: For hollow substrates use in combination with
perforated sleeve and fill 100% with resin.
Ripple P Fix TM
THREADED BARS
& REBARS
DRY WET &
FLOODED HOLES
OVERHEAD
Applications
SLOW GEL
FAST CURE
c
G
R I P P L E I N J E C T I O N T E C H N I Q U E
More Information
CONCRETE
FOR HEAVY
LOADS
KG
MASONRY
Gelling and curing times
Application Temp.
+10 to +20°C
+20 to +25°C
+25 to +30°C
+30 to +35°C
+35 to +40°C
+40 to +45°C
Gel Time
15 minutes
10 minutes
7.5 minutes
5.0 minutes
3.5 minutes
Load Time
5 hours
145 minutes
85 minutes
50 minutes
40 minutes
2.5 minutes 35 minutes
+45°C 2.5 minutes 12 minutes
Store in original and unopened packaging, the correct
way up and in cool and dry conditions between +5°C
and +25°C. Do not expose to sunlight.
www.rippleindia.in
Galvanized and Stainless Steel
F
ORVERY
H O T C O
NDITION
S
Made in UK
European Technical Assessment
ETAG 001 Parts 1 & 5 Option 7
Anchoring in concrete
ETA-14/0295
ETA
Batch:
Expiry:
LEED TESTED
PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No
94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an
allergic skin reaction. H319 Causes serious eye irritation. H400 Very
toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects.
Precautions: P273 Avoid release to the environment. P280 Wear
protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not
exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations.
PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS
No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304
May be fatal if swallowed and enters airways. H315 Causes skin
irritation. H319 Causes serious eye irritation. Precautions: P280
Wear protective gloves/protective clothing/eye protection/face
protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse
cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of
contents/container in accordance with national regulations.
Ripple Construction Products Pvt. Ltd. 303-304, Royal Arcadia, Above SBI Bank, Balkampet,
S.R. Nagar, Hyderabad - 500 038, Telangana, India. Tel: +91 40 400 40 707.
Ripple P Fix
165.000
190.000
165.000
190.000
1776-yr48179-pml27501776-yr48179-pml2750
12-SEP-14 12:46:4612-SEP-14 12:46:46
cutter
Black
Yellow
Magenta
Cyan
PRINT
DIRECTION
PRINT
DIRECTION
Multi-Purpose Polyester
Styrene Free Chemical Anchoring System
India India
Installation Parameters
80 mm
Embedment
Depth (std)
Torque
Moment
Characteristic
Load
Drill Hole
Ø
Anchor
Ø
90 mm
110 mm
128 mm
170 mm
210 mm
10 Nm
20 Nm
40 Nm
80 Nm
150 Nm
200 Nm
17 kN
22 kN
37 kN
57 kN
85 kN
118 kN
10 mm
12 mm
14 mm
18 mm
22 mm
26 mm
M8
M10
M12
M16
M20
M24
• Multi-purpose and high performance
Installation Procedure
1 3 5
x2
2 4 6
x2
MIN
50%
8* 97
8* - Note: For hollow substrates use in combination with
perforated sleeve and fill 100% with resin.
Ripple P Fix TM
R I P P L E I N J E C T I O N T E C H N I Q U E
Gelling and curing times
Application Temp.
+10 to +20°C
+20 to +25°C
+25 to +30°C
+30 to +35°C
+35 to +40°C
+40 to +45°C
Gel Time
15 minutes
10 minutes
7.5 minutes
5.0 minutes
3.5 minutes
Load Time
5 hours
145 minutes
85 minutes
50 minutes
40 minutes
2.5 minutes 35 minutes
+45°C 2.5 minutes 12 minutes
Store in original and unopened packaging, the correct
way up and in cool and dry conditions between +5°C
and +25°C. Do not expose to sunlight.
Galvanized and Stainless Steel
F
ORVERY
H O T C O
NDITION
S
European Technical Assessment
ETAG 001 Parts 1 & 5 Option 7
Anchoring in concrete
ETA-14/0295
ETA
LEED TESTED
PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No
94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an
allergic skin reaction. H319 Causes serious eye irritation. H400 Very
toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects.
Precautions: P273 Avoid release to the environment. P280 Wear
protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not
exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations.
PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS
No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304
May be fatal if swallowed and enters airways. H315 Causes skin
irritation. H319 Causes serious eye irritation. Precautions: P280
Wear protective gloves/protective clothing/eye protection/face
protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse
cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of
contents/container in accordance with national regulations.
Ripple P Fix
1776-yr48179-pml27501776-yr48179-pml2750
12-SEP-14 12:46:4612-SEP-14 12:46:46
PRINT
DIRECTION
PRINT
DIRECTION

2. I n d i a
TM
pose Polyester
mical Anchoring System
nt: 410 ml
80 mm
Embedment
Depth (std)
Torque
Moment
Characteristic
Load
Drill Hole
Ø
Anchor
Ø
90 mm
110 mm
128 mm
170 mm
210 mm
10 Nm
20 Nm
40 Nm
80 Nm
150 Nm
200 Nm
17 kN
22 kN
37 kN
57 kN
85 kN
118 kN
10 mm
12 mm
14 mm
18 mm
22 mm
26 mm
M8
M10
M12
M16
M20
M24
and high performance
tem for use in concrete,
other substrates
mperatures of up to 45°C
n dry wet & flooded holes
ng diameters
zle life
Installation Procedure
1 3 5
x2
2 4 6
x2
MIN
50%
8* 97
8* - Note: For hollow substrates use in combination with
perforated sleeve and fill 100% with resin.
e P Fix TM
More Information
Gelling and curing times
Application Temp.
+10 to +20°C
+20 to +25°C
+25 to +30°C
+30 to +35°C
+35 to +40°C
+40 to +45°C
Gel Time
15 minutes
10 minutes
7.5 minutes
5.0 minutes
3.5 minutes
Load Time
5 hours
145 minutes
85 minutes
50 minutes
40 minutes
2.5 minutes 35 minutes
+45°C 2.5 minutes 12 minutes
Store in original and unopened packaging, the correct
way up and in cool and dry conditions between +5°C
and +25°C. Do not expose to sunlight.
www.rippleindia.in
Galvanized and Stainless Steel
Made in UK
European Technical Assessment
ETAG 001 Parts 1 & 5 Option 7
Anchoring in concrete
ETA-14/0295
ETA
Batch:
Expiry:
LEED TESTED
PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No
94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an
allergic skin reaction. H319 Causes serious eye irritation. H400 Very
toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects.
Precautions: P273 Avoid release to the environment. P280 Wear
protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not
exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations.
PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS
No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304
May be fatal if swallowed and enters airways. H315 Causes skin
irritation. H319 Causes serious eye irritation. Precautions: P280
Wear protective gloves/protective clothing/eye protection/face
protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse
cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of
contents/container in accordance with national regulations.
Ripple Construction Products Pvt. Ltd. 303-304, Royal Arcadia, Above SBI Bank, Balkampet,
S.R. Nagar, Hyderabad - 500 038, Telangana, India. Tel: +91 40 400 40 707.
Ripple P Fix
190.000190.000
cutter
Black
Yellow
Magenta
Cyan
1 3
x2
2
x2
7
Fill min
2/3 rd
8 94
x2
6
x2
5
x2

3. I n d i a
TM

4. I n d i a
TM