1. 321 Blackstone Avenue, Ithaca, NY 14850, United States of America
Tel. +1 607-257-7785•eFax +1 720-533-6886•eMail tbrock@virtualcash.biz
Price Table for Ricoh with 20-Pin connector and Harness IH1037
Price Paper Size Color/BW Duplex
1 8½ x 11 –A4 BW No
2 11 x 17 –A3 BW No
3 8½ x 11 –A4 Color No
4 11 x 17 –A3 Color No
5 8½ x 11 –A4 BW Yes
6 11 x 17 –A3 BW Yes
7 8½ x 11 –A4 Color Yes
8 11 x 17 –A3 Color Yes
INSTALLATION INFORMATION
GESTETNER3222/3227,RICOHAFICIO220/270“Russian”
1. Select SP mode
Select 5-113
Change 0 to 2 for card reader, or change 0 to 3 for coin box and exit SP modes.
2. SELECT USER TOOLS
Select 1 –System
Scroll to page 5/5
Enter 18 –Ops Tools
Enter 5 –Restrict
Enter 1 –Copier
Select ON with arrow keys and exit from User Tools
3. PLUG 20 WAY IDC CONNECTOR INTO CN345 ON MAIN BOARD
GESTETNER3220/3225,RICOHAFICIO200/250“Adam”
1. REMOVE REAR COVER AND PLUG IN 20-WAY IDC PLUG ON CARD READER INTO CN136 ON MAIN BOARD.
2. Enter SP modes
Enter 5 –OK
Enter 113 –OK
Select 2 for card reader or 3 for coin box –OK
Exit from SP mode
3. Press User Tool key
Scroll to screen 5/5
Enter 18 –Restricted Access
Scroll to screen 2/2
Enter 6 –Copier Access
Select Yes –OK
Exit User Tools –Set Key Counter or Insert Coins will be displayed

2. 321 Blackstone Avenue, Ithaca, NY 14850, United States of America
Tel. +1 607-257-7785•eFax +1 720-533-6886•eMail tbrock@virtualcash.biz
GESTETNER 3255/3265/3355/3370, RICOH AFICIO 550/650/551/700
1. Enter SP modes
Select Copy SP
Select 5-113
Change 0 to 1
Enter
Select 5-120
Change 0 to 2
Enter
Exit from SP modes
2. Select User Tools
Select System Settings
Select Count Manager
Select Set Key Card
Select Copy (copy/document server on 3355/3370)
Press OK and exit User Codes
3. Connect 20 way IDC plug into CN216 on main board.
GESTETNER 3235/3245, RICOH AFICIO 350/450 “NAD”
1. Enter SP mode
Enter 1
Select SP5-401-3 and change 0 to 1 - OK
Select SP5-113-0 and change 0 to 2 for card reader - OK
Exit SP mode
2. Remove rear cover and plug 20-way IDC on card reader into CN210 on I/O Board.
GESTETNER CS206/CS206D/CS225/CS231/CS210/213, RICOH AFICIO 3006/4006/3506/4506
1. Enter SP mode
Select 5-113
Change 0 to 1 for card reader
Exit SP modes
2. Connect 20 way IDC plug into CN221 on I/O board –CS206/CS206D or
Connect 20 way IDC plug into CN213 on I/O board –CS225/CS231D or
Connect 20 way IDC plug into CN231 on I/O board –CS210/CS213
** Please note on CS206/Aficio 3006 firmware must be at least 6.913 for correct operation.
GESTETNER 3285/32105, RICOH AFICIO 850/1050 “BELLINI”
1. Enter SP mode (yellow key 1-0-7 C key)
Select SP mode
Select 5-113 –Change from 0 to 1
Select 5-120 –Change from 0 to 1
Exit SP mode
2. Enter user tools
Select system settings
Select Key-op tools
For card reader select key card copier access and change from off to on.
3. Plug the 20-way IDC plug on card reader into CN612 on the BCU board on rear of machine.

3. 321 Blackstone Avenue, Ithaca, NY 14850, United States of America
Tel. +1 607-257-7785•eFax +1 720-533-6886•eMail tbrock@virtualcash.biz
GESTETNER 2212/2712/3212, RICOH AFICIO1022/1027“NEW RUSSIAN”
** PLEASE NOTE Firmware must be Version 5.19
1. Enter SP mode
Select Copy SP
Select 5-113-001 Select 3 (pre-paid card) for card reader
Select 5-120 Change to 1-OK
Select 5-121 Change to 0-OK
Exit SP modes
2. Enter User tools
Select System settings
Select Key-op tools
Select External charge unit management
Change“copier”toON
Exit user tools
3. Connect 20-way IDC connector from coin box/card reader into CN345 on SBCU board.
GESTETNER 3502/4502, RICOH AFICIO 1035/1045“ADONIS”
** PLEASE NOTE Firmware must be 5.24s. This is on 2 flashcards.
Load CS1802 first and then BICU2305 disp.
1. Enter SP mode
Select Copy SP
Select 5-113-001 Select 3 (pre-paid card) for card reader
Select 5-120 Change to 1-OK
Select 5-121 Change to 0-OK
Exit SP modes
2. Enter User tools
Select System settings
Select Key operator tools
Select External charge unit management
Change“copier”toON
Exit user tools
3. Connect 20-way IDC connector from coin box/card reader into CN210 on I/O board.

4. 321 Blackstone Avenue, Ithaca, NY 14850, United States of America
Tel. +1 607-257-7785•eFax +1 720-533-6886•eMail tbrock@virtualcash.biz
GESTETNER 6002/7502, RICOH AFICIO 1060/1075 “MARTINI”
1. Select SP mode
Select copy SP
Select 5 - 113
Select 2 key card down
Exit SP mode
2. Enter User Tools
Select System Settings
Select Key Operator Tools
Select External Charge Unit Management
Change‘Copier’toON
Exist User Tools
3. Connect the 20 way IDC connector from card reader into CN218
GESTETNER DSc224/232, DSc332/338 –RICOH AFICIO 2232/2238
1. Enter SP mode
Select copy SP
Select 5 –113
Select 2 (key card down) for card reader
Exit SP mode
2. Enter User Tools
Select System Settings
Select Key Operator Tools
Select External Charge Unit
Select all copier functions (i.e. full colour, black/white, single colour and two colour) OK
Exit User Tools
3. Connect the 20 way IDC connector from card reader into CN218 onEXI0 board