Request for Quote
•
1 like•260 views
Interested in receiving a quote for a SolarDock mounting system? Complete this and send to info@solardock.com. It will be forwarded to the appropriate salesperson who will follow up with you.
Report
Share
Report
Share
Download to read offline
Recommended
GE Energy_PowerPoint_Template 05
This document provides guidance on branding and presentation templates for GE Energy. It instructs presenters to only use the name "GE Energy" and not reference older business identities. It also provides templates for PowerPoint presentations, with rules on fonts, text size, and layouts. Examples of charts, graphics, and photo usage are included.
MODULE-CB-02-CB_CHT_Z1_RL_DR_ME_50_02-C02
This document provides details for a multi service module including the roof level plan view, project name, drawing number, date drawn, scale, department, CAD file name, drawing title, and project status. It also lists section views and isometric views of the frame. The document was drawn by D. HART and checked by MP on August 4th and 5th, 2016.
Belt Feeder Chute
1. This drawing shows views and dimensions of a belt feeder chute for a platinum plant.
2. The drawing was prepared using Tekla Structures software and supplied by Cadex SA, a Tekla reseller based in South Africa.
3. Views include side view, plan on flange, 3D view, and view 04 and 02 with labeled dimensions.
GagonAssem.PDF
This document contains details for a roof panel assembly including the profile dimensions of 50x50x2.5mm, a list of numbers and letters that are likely references for the different roof panel components, manufacturing and approval information, and notes specifying that dimensions are in millimeters and contact information for a treasurer named Yosi.
Loading Hopper
This set of drawings from Tekla Structures depicts views and sections of a loading hopper structure. It includes an isometric view, part plans, sections, elevations and additional views. The drawings were prepared using Tekla Structures and include notes about the model, scales, and copyright information.
Двухъярусная кровать-чердак
This technical drawing document contains plans for a loft bed. The loft bed features wooden boards that measure 1600mm by 1860mm forming the base. Vertical boards are attached to the base and include dimensions of lengths between 1300mm to 1600mm. Bolts and wooden pegs are noted for connecting the boards together. Views including front, side, and top are depicted along with labeled cutaway sections showing dimensions for construction.
P15921-1(23) North Elevation Proposed (1)
This drawing shows the proposed north elevation for a new retail space located at 292 to 298 High Street in Slough. The drawing depicts the materials and design features planned for the building exterior, including standing seam zinc cladding, thermally broken aluminum-faced windows, cantilevered balconies with glass balustrades, and new canopies with aluminum edge trim. Notes provide information on material colors and landscaping details referenced in other project documents. The drawing is copyright protected and for planning purposes only.
La guardia airport worst to first - carl galioto, hok
This document discusses the planning, design, and implementation of the new LaGuardia Airport in New York, which includes the largest public-private partnership (P3) in the United States. The goals of the new airport master plan are to create a single, unified airport with improved airside and landside operations, appealing architecture, and focus on sustainability and resilience. The project will be completed through multiple phases of construction from 2016 through 2022 to modernize the aging facilities while maintaining airport operations.
Recommended
GE Energy_PowerPoint_Template 05
This document provides guidance on branding and presentation templates for GE Energy. It instructs presenters to only use the name "GE Energy" and not reference older business identities. It also provides templates for PowerPoint presentations, with rules on fonts, text size, and layouts. Examples of charts, graphics, and photo usage are included.
MODULE-CB-02-CB_CHT_Z1_RL_DR_ME_50_02-C02
This document provides details for a multi service module including the roof level plan view, project name, drawing number, date drawn, scale, department, CAD file name, drawing title, and project status. It also lists section views and isometric views of the frame. The document was drawn by D. HART and checked by MP on August 4th and 5th, 2016.
Belt Feeder Chute
1. This drawing shows views and dimensions of a belt feeder chute for a platinum plant.
2. The drawing was prepared using Tekla Structures software and supplied by Cadex SA, a Tekla reseller based in South Africa.
3. Views include side view, plan on flange, 3D view, and view 04 and 02 with labeled dimensions.
GagonAssem.PDF
This document contains details for a roof panel assembly including the profile dimensions of 50x50x2.5mm, a list of numbers and letters that are likely references for the different roof panel components, manufacturing and approval information, and notes specifying that dimensions are in millimeters and contact information for a treasurer named Yosi.
Loading Hopper
This set of drawings from Tekla Structures depicts views and sections of a loading hopper structure. It includes an isometric view, part plans, sections, elevations and additional views. The drawings were prepared using Tekla Structures and include notes about the model, scales, and copyright information.
Двухъярусная кровать-чердак
This technical drawing document contains plans for a loft bed. The loft bed features wooden boards that measure 1600mm by 1860mm forming the base. Vertical boards are attached to the base and include dimensions of lengths between 1300mm to 1600mm. Bolts and wooden pegs are noted for connecting the boards together. Views including front, side, and top are depicted along with labeled cutaway sections showing dimensions for construction.
P15921-1(23) North Elevation Proposed (1)
This drawing shows the proposed north elevation for a new retail space located at 292 to 298 High Street in Slough. The drawing depicts the materials and design features planned for the building exterior, including standing seam zinc cladding, thermally broken aluminum-faced windows, cantilevered balconies with glass balustrades, and new canopies with aluminum edge trim. Notes provide information on material colors and landscaping details referenced in other project documents. The drawing is copyright protected and for planning purposes only.
La guardia airport worst to first - carl galioto, hok
This document discusses the planning, design, and implementation of the new LaGuardia Airport in New York, which includes the largest public-private partnership (P3) in the United States. The goals of the new airport master plan are to create a single, unified airport with improved airside and landside operations, appealing architecture, and focus on sustainability and resilience. The project will be completed through multiple phases of construction from 2016 through 2022 to modernize the aging facilities while maintaining airport operations.
CPQ Solution Study
Our Configure, Price, Quote (CPQ) Solution Study covers one of the six categories presented in our Sales Enablement Best Practices Report. As the name implies, Configure, Price, Quote (CPQ) solutions provide functionality to support complex sales transactions. CPQ systems enable sales teams to custom design or configure a solution for a customer from different product sets, options or piece parts; price the solution appropriately and prepare a quote for the customer in a negotiated sales situation.
We define CPQ as comprising the strategies, processes, technologies and tools that support the organization’s ability to effectively configure products/services from a set of options, price a customized solution based on relevant internal and external factors and provide a digitally generated quote for customer signature and payment.
This study covers the following sections:
- Executive Summary
- What is Configure, Price, Quote?
- Benefits of CPQ
- The CPQ Solutions Landscape
- CPQ Deployment Lifecycle
- Vendor Selection Criteria
- Action Plan
- Analyst Bottom Line
- About the Research Analysts
- Our Solution Study Methodology
- About Demand Metric
There are 8 premium tools & templates linked inside of this solution study:
- CPQ Readiness Assessment
- Sales Enablement Framework
- CPQ Strategy Scorecard
- CPQ Vendors Matrix
- CPQ System RFP Template
- CPQ Vendor Evaluation Matrix
- MarCom Plan Methodology
- CPQ Program Metrics Dashboard
To obtain this document, visit us at http://www.demandmetric.com/register
Draft Proposal from the National Commission on Fiscal Responsibility and Reform
The document outlines a proposal from co-chairs to reduce the federal deficit and debt through spending cuts and tax reform. It proposes $4 trillion in deficit reduction through 2020, including $1.5 trillion from discretionary spending cuts, $733 billion from mandatory spending cuts, and $751 billion from tax reform. Specific policies include caps on discretionary spending at 2010 levels with a 1% annual cut through 2015, illustrative defense and domestic spending cuts of $100 billion each in 2015, and reforms to entitlement programs, health care, and the tax code. The goal is to reduce the deficit to 2.2% of GDP by 2015 and achieve a balanced budget by 2037.
Bri's quote project
The document contains several quotes from Ray Bradbury novels including Dandelion Wine and Fahrenheit 451. It also includes quotes from works by J.D. Salinger and Sarah Orne Jewett. The quotes reflect on themes of life, humanity, secrets, and perspective.
Contract draft
The document outlines a contract between Fundacion Para La Reconciliacion (Recon) and KaosPilot students to develop products promoting forgiveness, care, and reconciliation from March 26th to May 4th. The KaosPilot team will help design products and a marketing strategy, identify sponsors, and work with Recon to strengthen messages of peace in Colombia and beyond. Recon will provide workspace, transportation assistance, and consider other project needs to support the students' work.
SCB 2013 DLP, công nghệ, và phương pháp triển khai
DLP stands for data loss prevention. It is a solution that helps organizations understand how and what data is leaving their networks in order to protect sensitive information. DLP works by deploying various modules to discover data at rest, prevent data loss in motion via email and web, and monitor data in use on endpoints and networks. It analyzes network traffic and endpoints to detect policy violations and capture data according to defined policies. DLP provides comprehensive protection by integrating with other security tools like email and web gateways, encryption, and mobile device management.
Interiors Designers by S L Interiors andInfra
SL interiors and Infra is a Hyderabad based interior designing company, founded by young and dynamic professional interior designers specializing in both commercial and residential projects. We create modern designs as per the client requests.
Social Media Proposal
Presenting at the National Health Commission Office of Thailand. Copyright 2015. All rights reserved.
SPUSSIST_cutting tools
SPUSSIST - Cutting Tools is a software developed by SPUDWEB TECHNOLOGIES PRIVATE LIMITED to automate the generation of drawings and quotations for cutting tools. The software has two modules - a customer drawing and quotation module that can generate a drawing and quotation within 5 minutes, and a manufacturing drawing module that automatically creates detailed stage drawings. The software takes 2-12 weeks typically to deploy based on customer requirements and is hosted on the client's server. It allows users to quickly design standard or custom tools, automatically generates CAD drawings, and calculates costs based on user-defined logic.
Lesson 10 Fare Quote
Display a fare, estimate the fare for an itinerary by using Informative Pricing, and price a specific itinerary in a PNR by using Itinerary Pricing functions
How to write a quote analysis
Henry David Thoreau said "Go confidently in the direction of your dreams. Live the life you have imagined." This quote encourages people to pursue their ambitions and dreams without letting others deter them. As one of the founders of transcendentalism, Thoreau was reminding people to live as they imagine, with confidence and no regret, not allowing others to stand in the way of their goals and visions. The quote is a call to clearly envisioned dreams and goals and follow them steadfastly without distraction.
Data Leakage Prevention (DLP)
Data Leakage is an important concern for the business organizations in this increasingly networked world these days. Unauthorized disclosure may have serious consequences for an organization in both long term and short term. Risks include losing clients and stakeholder confidence, tarnishing of brand image, landing in unwanted lawsuits, and overall losing goodwill and market share in the industry.
Plan symbols
The document provides symbols and definitions used in architectural and engineering drawings. It includes symbols for architectural plans, structural elements, plumbing, HVAC, fire protection, materials, landscape, and drawing conventions. Key symbols defined are for walls, sections, fixtures, piping systems, materials, windows, doors, dimensions and references. The document is a comprehensive guide to the standardized symbols and abbreviations used in construction documents.
Architecture drawing presentation
Architectural drawings are technical drawings used by architects to develop and communicate building design ideas. They include various standard views like floor plans, sections, elevations, and site plans. Floor plans show the arrangement of a building level and include furniture and fixtures. Site plans show the building footprint and surrounding context. Elevations display the front or sides of a building. Sections cut through a building to reveal interior details. Architectural drawings are scaled and use conventions for accurate representation and understanding of designs.
Architectural Working Drawings - الرسومات التنفيذية المعمارية
This document provides an overview of working construction documents, including drawings and specifications. It discusses the components and purpose of construction drawings, including plans, elevations, sections, and details. It explains that drawings show the extent, configuration, location, relationships and dimensions of a construction project in graphic and quantitative form. The document also covers drawing standards, such as scale, layout, title blocks and numbering systems. It provides examples of site plans, floor plans, sections, elevations, wall sections and stair details. Finally, it discusses the drawing development process and organizing drawings into consistent formats and sheet sequences.
Hcd 70 Split Waveguide
This document provides a project definition and design details for a split waveguide to be installed on an HCD-70 ion beam system. The split waveguide will allow access to new multi-coil assemblies intended to enhance the beam profile after deceleration. Key aspects of the design include splitting the existing waveguide into fixed and floating chambers, installing new multi-coil assemblies with field extending bars, and modifying related components like the ground lens and magnet yoke. Testing of prototypes indicated some tuning issues with the new design which require further iterations.
Mohamed osama cv piping
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
Cast designer weld chassis
The unique solution for complex large welding and assembly process, with full chain solution from the material, to process design, to simulation, to production and automatic optimization for welding parameters and assembly sequence
Taming The Wind with Engineered Tall Walls
This document provides an overview of tall wall systems and tools for designing tall walls. It discusses components of tall wall systems like studs, columns, headers and hardware. It also covers code requirements, technical tools like literature and software, and provides a design example using software. The goal is for participants to understand terminology, code requirements, loading considerations, and how to evaluate and design tall wall systems.
Bikram Jeet (Achievements from 2006 - 2013)
This presentation shows some of the interesting projects snapshots that were completed under my supervision during 2006-2013.
Email: bj@bikramjeet.com
Website: www.bikramjeet.com
DraftingexpertAcedesigner
Daniel Selbe has over 30 years of experience in 3D modeling and drafting using CATIA, AutoCAD, SolidWorks and other CAD software. He has worked as a designer, drafter and technical writer for companies in the aerospace, automotive, naval and other industries. His experience includes digital pre-assembly designs, digital mockups, wire harness routing, structural modeling and electrical systems design. He is proficient in multiple CAD software packages and holds qualifications in CATIA V4-V5, AutoCAD and SolidWorks.
DraftingexpertAcedesigner
Daniel Selbe has over 30 years of experience in 3D modeling and 2D drafting using various CAD software programs such as CATIA, SolidWorks, AutoCAD, and UG. He has worked on projects in the aerospace, automotive, and naval industries for companies like Boeing, Sikorsky, and Bath Iron Works. Selbe has a background in mechanical design, electrical systems design, and digital mockup creation from legacy drawings.
Ramesh.S.M
This document provides a qualification profile for S.M. Ramesh, an engineer with over 12 years of experience in aerospace and automotive design using CAD tools like CATIA. He has extensive experience in areas like design and drafting, modeling, electrical harness installation, definition dossier checking, and working with Airbus processes and tools on projects like the A350XWB. His educational qualifications include a B.E. in Mechanical Engineering and experience with companies like Aspect Ration, Assystem India, and Safran India.
More Related Content
Viewers also liked
CPQ Solution Study
Our Configure, Price, Quote (CPQ) Solution Study covers one of the six categories presented in our Sales Enablement Best Practices Report. As the name implies, Configure, Price, Quote (CPQ) solutions provide functionality to support complex sales transactions. CPQ systems enable sales teams to custom design or configure a solution for a customer from different product sets, options or piece parts; price the solution appropriately and prepare a quote for the customer in a negotiated sales situation.
We define CPQ as comprising the strategies, processes, technologies and tools that support the organization’s ability to effectively configure products/services from a set of options, price a customized solution based on relevant internal and external factors and provide a digitally generated quote for customer signature and payment.
This study covers the following sections:
- Executive Summary
- What is Configure, Price, Quote?
- Benefits of CPQ
- The CPQ Solutions Landscape
- CPQ Deployment Lifecycle
- Vendor Selection Criteria
- Action Plan
- Analyst Bottom Line
- About the Research Analysts
- Our Solution Study Methodology
- About Demand Metric
There are 8 premium tools & templates linked inside of this solution study:
- CPQ Readiness Assessment
- Sales Enablement Framework
- CPQ Strategy Scorecard
- CPQ Vendors Matrix
- CPQ System RFP Template
- CPQ Vendor Evaluation Matrix
- MarCom Plan Methodology
- CPQ Program Metrics Dashboard
To obtain this document, visit us at http://www.demandmetric.com/register
Draft Proposal from the National Commission on Fiscal Responsibility and Reform
The document outlines a proposal from co-chairs to reduce the federal deficit and debt through spending cuts and tax reform. It proposes $4 trillion in deficit reduction through 2020, including $1.5 trillion from discretionary spending cuts, $733 billion from mandatory spending cuts, and $751 billion from tax reform. Specific policies include caps on discretionary spending at 2010 levels with a 1% annual cut through 2015, illustrative defense and domestic spending cuts of $100 billion each in 2015, and reforms to entitlement programs, health care, and the tax code. The goal is to reduce the deficit to 2.2% of GDP by 2015 and achieve a balanced budget by 2037.
Bri's quote project
The document contains several quotes from Ray Bradbury novels including Dandelion Wine and Fahrenheit 451. It also includes quotes from works by J.D. Salinger and Sarah Orne Jewett. The quotes reflect on themes of life, humanity, secrets, and perspective.
Contract draft
The document outlines a contract between Fundacion Para La Reconciliacion (Recon) and KaosPilot students to develop products promoting forgiveness, care, and reconciliation from March 26th to May 4th. The KaosPilot team will help design products and a marketing strategy, identify sponsors, and work with Recon to strengthen messages of peace in Colombia and beyond. Recon will provide workspace, transportation assistance, and consider other project needs to support the students' work.
SCB 2013 DLP, công nghệ, và phương pháp triển khai
DLP stands for data loss prevention. It is a solution that helps organizations understand how and what data is leaving their networks in order to protect sensitive information. DLP works by deploying various modules to discover data at rest, prevent data loss in motion via email and web, and monitor data in use on endpoints and networks. It analyzes network traffic and endpoints to detect policy violations and capture data according to defined policies. DLP provides comprehensive protection by integrating with other security tools like email and web gateways, encryption, and mobile device management.
Interiors Designers by S L Interiors andInfra
SL interiors and Infra is a Hyderabad based interior designing company, founded by young and dynamic professional interior designers specializing in both commercial and residential projects. We create modern designs as per the client requests.
Social Media Proposal
Presenting at the National Health Commission Office of Thailand. Copyright 2015. All rights reserved.
SPUSSIST_cutting tools
SPUSSIST - Cutting Tools is a software developed by SPUDWEB TECHNOLOGIES PRIVATE LIMITED to automate the generation of drawings and quotations for cutting tools. The software has two modules - a customer drawing and quotation module that can generate a drawing and quotation within 5 minutes, and a manufacturing drawing module that automatically creates detailed stage drawings. The software takes 2-12 weeks typically to deploy based on customer requirements and is hosted on the client's server. It allows users to quickly design standard or custom tools, automatically generates CAD drawings, and calculates costs based on user-defined logic.
Lesson 10 Fare Quote
Display a fare, estimate the fare for an itinerary by using Informative Pricing, and price a specific itinerary in a PNR by using Itinerary Pricing functions
How to write a quote analysis
Henry David Thoreau said "Go confidently in the direction of your dreams. Live the life you have imagined." This quote encourages people to pursue their ambitions and dreams without letting others deter them. As one of the founders of transcendentalism, Thoreau was reminding people to live as they imagine, with confidence and no regret, not allowing others to stand in the way of their goals and visions. The quote is a call to clearly envisioned dreams and goals and follow them steadfastly without distraction.
Data Leakage Prevention (DLP)
Data Leakage is an important concern for the business organizations in this increasingly networked world these days. Unauthorized disclosure may have serious consequences for an organization in both long term and short term. Risks include losing clients and stakeholder confidence, tarnishing of brand image, landing in unwanted lawsuits, and overall losing goodwill and market share in the industry.
Plan symbols
The document provides symbols and definitions used in architectural and engineering drawings. It includes symbols for architectural plans, structural elements, plumbing, HVAC, fire protection, materials, landscape, and drawing conventions. Key symbols defined are for walls, sections, fixtures, piping systems, materials, windows, doors, dimensions and references. The document is a comprehensive guide to the standardized symbols and abbreviations used in construction documents.
Architecture drawing presentation
Architectural drawings are technical drawings used by architects to develop and communicate building design ideas. They include various standard views like floor plans, sections, elevations, and site plans. Floor plans show the arrangement of a building level and include furniture and fixtures. Site plans show the building footprint and surrounding context. Elevations display the front or sides of a building. Sections cut through a building to reveal interior details. Architectural drawings are scaled and use conventions for accurate representation and understanding of designs.
Architectural Working Drawings - الرسومات التنفيذية المعمارية
This document provides an overview of working construction documents, including drawings and specifications. It discusses the components and purpose of construction drawings, including plans, elevations, sections, and details. It explains that drawings show the extent, configuration, location, relationships and dimensions of a construction project in graphic and quantitative form. The document also covers drawing standards, such as scale, layout, title blocks and numbering systems. It provides examples of site plans, floor plans, sections, elevations, wall sections and stair details. Finally, it discusses the drawing development process and organizing drawings into consistent formats and sheet sequences.
Viewers also liked (14)
Draft Proposal from the National Commission on Fiscal Responsibility and Reform
Draft Proposal from the National Commission on Fiscal Responsibility and Reform
SCB 2013 DLP, công nghệ, và phương pháp triển khai
SCB 2013 DLP, công nghệ, và phương pháp triển khai
Architectural Working Drawings - الرسومات التنفيذية المعمارية
Architectural Working Drawings - الرسومات التنفيذية المعمارية
Similar to Request for Quote
Hcd 70 Split Waveguide
This document provides a project definition and design details for a split waveguide to be installed on an HCD-70 ion beam system. The split waveguide will allow access to new multi-coil assemblies intended to enhance the beam profile after deceleration. Key aspects of the design include splitting the existing waveguide into fixed and floating chambers, installing new multi-coil assemblies with field extending bars, and modifying related components like the ground lens and magnet yoke. Testing of prototypes indicated some tuning issues with the new design which require further iterations.
Mohamed osama cv piping
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
Cast designer weld chassis
The unique solution for complex large welding and assembly process, with full chain solution from the material, to process design, to simulation, to production and automatic optimization for welding parameters and assembly sequence
Taming The Wind with Engineered Tall Walls
This document provides an overview of tall wall systems and tools for designing tall walls. It discusses components of tall wall systems like studs, columns, headers and hardware. It also covers code requirements, technical tools like literature and software, and provides a design example using software. The goal is for participants to understand terminology, code requirements, loading considerations, and how to evaluate and design tall wall systems.
Bikram Jeet (Achievements from 2006 - 2013)
This presentation shows some of the interesting projects snapshots that were completed under my supervision during 2006-2013.
Email: bj@bikramjeet.com
Website: www.bikramjeet.com
DraftingexpertAcedesigner
Daniel Selbe has over 30 years of experience in 3D modeling and drafting using CATIA, AutoCAD, SolidWorks and other CAD software. He has worked as a designer, drafter and technical writer for companies in the aerospace, automotive, naval and other industries. His experience includes digital pre-assembly designs, digital mockups, wire harness routing, structural modeling and electrical systems design. He is proficient in multiple CAD software packages and holds qualifications in CATIA V4-V5, AutoCAD and SolidWorks.
DraftingexpertAcedesigner
Daniel Selbe has over 30 years of experience in 3D modeling and 2D drafting using various CAD software programs such as CATIA, SolidWorks, AutoCAD, and UG. He has worked on projects in the aerospace, automotive, and naval industries for companies like Boeing, Sikorsky, and Bath Iron Works. Selbe has a background in mechanical design, electrical systems design, and digital mockup creation from legacy drawings.
Ramesh.S.M
This document provides a qualification profile for S.M. Ramesh, an engineer with over 12 years of experience in aerospace and automotive design using CAD tools like CATIA. He has extensive experience in areas like design and drafting, modeling, electrical harness installation, definition dossier checking, and working with Airbus processes and tools on projects like the A350XWB. His educational qualifications include a B.E. in Mechanical Engineering and experience with companies like Aspect Ration, Assystem India, and Safran India.
The Kernel Market & C3D
The kernel market is dominated by Parasolid and ACIS kernels. CGM is also used in CATIA. ShapeManager and Granite have limited presence. C3D is a newer kernel used in KOMPAS-3D with a strong C++ structure and capabilities in surfacing and solids modeling. To position C3D for future success, the document recommends focusing on documentation, examples, a test environment, addressing technology challenges, and global partnerships.
SYED QUADRI (SR.DRAFTSMAN(CIVIL,STRUCTURAL))
This document is a curriculum vitae for Syed Sibgathulla Quadri, summarizing his professional experience and qualifications. He has over 15 years of experience as a civil draughtsman and structural designer in Saudi Arabia and India, specializing in AutoCAD and Microstation. His experience includes projects for airports, metro rail systems, hospitals and universities. He is currently working as a senior civil draughtsman on infrastructure projects in Riyadh and Jubail, Saudi Arabia.
Gw graham associates power point
This document contains contact information for Greg Graham and outlines various IT/telecom facility services he provides, including surveys of DC power, UPS, HVAC systems, and grounding problems. It also describes services for critical infrastructure power and cooling design such as battery sizing, generator design, and room layout. Additionally, it lists consulting services on custom standards compliance and training as well as facility project and program management from proposal through commissioning.
QC Review Process
The document provides guidance on conducting quality control reviews of design projects. It discusses reviewing projects to identify errors and omissions, constructability issues, and compliance with standards. It recommends reviewing projects from the perspective of others involved in the project and provides tips on annotation, graphics, and ensuring consistency across design stages. Standards and checklists are important quality control tools. Allowing adequate time for review is important to catch issues early in the design process.
Sr. Larbi Sennour
Seminario internacional: Tecnología aplicada al prefabricado mediante diseño de conexiones según ACI 318 – Experiencias en Japón y EEUU
Land Systems Presentation @ Zeus Numerix
Above presentation (including animations) can be downloaded from www.zeusnumerix.com
The technical presentation is a collection of case studies for the design and development projects for Land Systems. Examples include main battle tanks, infantry combat vehicles, towed artillery guns, and small arms. User will see technical description for muzzle brake design, range table for artillery shells, infantry combat vehicle floatation, and internal ballistics etc.
1_Brochure
The document describes the capabilities and deliverables for generating welding map drawings from piping ISO drawings. Key points include:
- Welding map drawings can be generated for 1500-2000 ISO drawings per day and deliver reports for 5000 drawings in a week.
- Drawings are provided in color-coded PDF format to easily identify piping components and welds for fabrication versus erection.
- An iterative process involves preliminary deliverables, client feedback, and final deliverables including modified drawings and reports.
- Final deliverables include welding map drawings, PCF files to build a 3D piping model, and reports with lists of welds, materials, spools and more.
3 d model generation for deformation analysis using laser scanning data of a ...
This document summarizes research on using laser scanning to generate a 3D model of a cooling tower for deformation analysis. Laser scans of the interior and exterior were taken from 27 setup positions, registering over 22 million points with a mean error of 5mm. The scans were processed in Cyclone and Geomagic Studio to create a simplified polygonal mesh and NURBS surface model suitable for finite element analysis, exported to IGES format. Accuracy was evaluated against geodetic checks and a fitted hyperboloid, finding deviations mostly within ±3cm and ±20cm respectively. The process demonstrated laser scanning and modeling can provide adequate accuracy 3D models for structural analysis applications.
Site log
The document is a site log form providing information about the GNSS site in Loja, Ecuador. It includes details about the site name and ID, monument description, location coordinates, installed receiver and antenna equipment, meteorological instrumentation, local conditions that could impact data quality, responsible agencies, and antenna reference point dimensions.
Barzan PJ Assignment
Muhammad Ahmed Rana was assigned to work as a Piping Design Engineer for the Barzan Onshore EPC Project from May 5, 2012 to May 8, 2013. The presentation outlines included an overview of the Barzan project, operations of the spoolgen software used for automatic spooling and joint marking, the interface between spoolgen and the CMS construction management system, managing engineering and site revisions through change sheets, revising site spool drawings, and providing field engineering support.
Similar to Request for Quote (18)
3 d model generation for deformation analysis using laser scanning data of a ...
3 d model generation for deformation analysis using laser scanning data of a ...
More from SolarDock
SolarDock Fire Testing Info Sheet
Fire resistance tests were performed on the SolarDock system with Motech solar panels using UL 1703 standards. Tests included spread of flame and burning brand tests performed by TUV Rheinland to determine the system's fire class rating. Additional manufacturers will be tested to provide accurate ratings of how installed solar systems impact fire spread across rooftops.
SolarDock Mechanical Load Testing Info Sheet
SolarDock successfully completed UL 2703 mechanical load tests, well surpassing the minimum standards. This info sheet covers what mechanical tests were performed, the results, and why the tests matter.
PRESS RELEASE: SolarDock earns Class A fire rating
SolarDock has earned a Class A Fire Rating for its solar mounting system after passing fire resistance tests required by UL 1703 and UL 2703 standards. The tests conducted by TUV Rheinland found that the SolarDock system, used with Class C solar modules, reduced the spread of flame by over 60% and prevented burning materials from falling onto the roof. With the Class A rating, SolarDock's system meets various building code requirements for fire safety.
PRESS RELEASE: SolarDock raises bar for solar racking mechanical strength
SolarDock has successfully completed the Mechanical Load Tests required in the proposed UL 2703 standard for solar mounting and racking systems. SolarDock’s load ratings far exceed the minimums currently proposed in UL 2703.
SolarDock 25 Year Warranty
Blue Solar, LLC provides a 25-year limited warranty on its SolarDock aluminum frame housing product. The warranty covers defects in materials and workmanship, and Blue Solar will repair or replace defective products. The warranty is void if the product is not installed properly or is modified without authorization. To activate the warranty, customers must submit photos and paperwork within 60 days of installation.
SolarDock Final Inspection Audit Checklist
SolarDock has an industry leading 25 year warranty, because we believe the system should last as long as the panels and your roof.
Along with the Warranty Form, this needs to be completed in order to activate the warranty.
SolarDock TUV Certification
SolarDock has been certified by TUV. This is the official certification document and lists the various tests/standards that were met to receive the certification.
These tests satisfy the most of the proposed requirements for the pending UL 2703 standard.
SolarDock Installation Manual SD2-L-050 v1.0
The document provides installation instructions for the SolarDock solar racking system. It outlines safety best practices, including understanding external forces on the system, following applicable safety guidelines, planning installation, prioritizing safety during installation, and conducting regular safety and quality audits. The instructions cover SolarDock components, preparing for and executing the installation, grounding the system, quality checks, warranty activation, and ongoing maintenance.
SolarDock Sample Build & Ballast plans
Wondering what our engineering documents look like? This gives you an idea of the level of design and detail that go into every custom built SolarDock system.
More from SolarDock (9)
PRESS RELEASE: SolarDock earns Class A fire rating
PRESS RELEASE: SolarDock earns Class A fire rating
PRESS RELEASE: SolarDock raises bar for solar racking mechanical strength
PRESS RELEASE: SolarDock raises bar for solar racking mechanical strength
Recently uploaded
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI, built on the robust SAP Business Technology Platform (SAP BTP), is the latest and most advanced version of our AI development, reaffirming our commitment to delivering top-tier AI solutions. Skybuffer AI harnesses all the innovative capabilities of the SAP BTP in the AI domain, from Conversational AI to cutting-edge Generative AI and Retrieval-Augmented Generation (RAG). It also helps SAP customers safeguard their investments into SAP Conversational AI and ensure a seamless, one-click transition to SAP Business AI.
With Skybuffer AI, various AI models can be integrated into a single communication channel such as Microsoft Teams. This integration empowers business users with insights drawn from SAP backend systems, enterprise documents, and the expansive knowledge of Generative AI. And the best part of it is that it is all managed through our intuitive no-code Action Server interface, requiring no extensive coding knowledge and making the advanced AI accessible to more users.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Azure API Management to expose backend services securely
How to use Azure API Management to expose backend service securely
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Recently uploaded (20)
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Skybuffer AI: Advanced Conversational and Generative AI Solution on SAP Busin...
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
Azure API Management to expose backend services securely
Azure API Management to expose backend services securely
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Request for Quote
- 1. Quote/Drawing Request Updated 10/08/12 Contact Information Company: Contact: Address: Phone: Email: Project Information (SolarDock Project #: ) Customer Name: Address: Project Name: Building Information (DesignCriteriaByZip.com can provide some of this information) Wind Zone (mph): Building height: Ground Snow Load (psf): Parapet height: Exposure Category (per ASCE7)* Roof Pitch: Occupancy Category (per ASCE7)* Roof info: EPDM PVC Built-up Importance Factor (per ASCE7) Ballasted Metal Other Terrain Features: Max psf of roof: Array Information Module manufacturer: Tilt angle: Module watts & series: Row spacing: # modules: Shade Multiplier: x the height Desired kW: Roof edge set back: String size: Total # of Strings: Other set backs: Drawing Information (please send CAD if available) Is drawing attached? yes no, design array using: Google Earth Image, or Dimensions: Did you include? module layout dimensions of roof starting point dimensions location of obstructions changes in roof pitch location of rooftop ridges location of fire walls Avoid rooftop ridges? yes no What is the pitch on either side of ridge? Ballast Information (this info is used to provide our most detailed ballast drawing – showing how many blocks needed vs. just weight) Using SolarDock recommended block (4x8x16”, 32-35 lbs) Will bag and weigh displaced roof ballast rock Using other sized block. Block dimensions: Block Weight: Notes Send to SolarDock Mac Users: Please complete in Acrobat Professional or Reader, NOT Preview. Thanks!