Reliance-6
•
0 likes•102 views
Eric Broome completed a course of instruction in motors and drives at the Reliance/Rockwell Automation Training Center in Greenville, South Carolina in August 1999. He successfully passed examinations in the subjects of the course and was awarded a Certificate of Proficiency by the Director of the School of Motors and Drives.
Report
Share
Report
Share
Download to read offline
Recommended
mark current cv
Mark Pritchard has over 25 years of experience working in the automotive industry as both a technician and trainer. He currently works as an automotive tutor and assessor, delivering training from level 2 to level 4 on topics such as engine management, electronic braking, and diagnostic systems. Pritchard is accredited to assess qualifications up to the level of Master Technician for HGVs and passenger vehicles. He has extensive experience diagnosing and repairing commercial vehicles, and enjoys maintaining his industry knowledge through research.
Curriculum vitae till of omar[1]
Mohammad Omar Mohammad Ali Al Reyalat is seeking a position as a maintenance manager. He has over 15 years of experience as a mechanic and maintenance assistant manager. He is proficient in English and Arabic and has received extensive technical training on engines, electronics systems, and vehicle maintenance.
ZAFAR IQBAL
Zafar Iqbal is a mechanical engineer seeking a challenging position in an efficient organization. He has a Bachelor's degree in Mechanical Engineering from Al-Khair University and diplomas in Mechanical Engineering. His work experience includes positions as a mechanical engineer for Yapi Merkezi in Saudi Arabia, Future Energy Alliance in the UAE, and Marian Mechanical Engineering and HMC Taxila in Pakistan. His responsibilities have included site inspections, preparing reports and method statements, quality control works, designing water tanks, and machining parts using lathes, mills, and other tools. He has skills in AutoCAD, MS Office, and mechanical systems for ships, engines, and factories.
CV_Paul Sanuya
Sanuya Paul is seeking employment as a mechanical fitter and machinist. She has over 15 years of work experience in palm oil and flour mills, including roles as an apprentice, tradesman, senior tradesman, and team leader. She currently works as a TVET mechanical school instructor. Paul has qualifications including a Certificate III in Engineering, Tradesman Certificate in maintenance fitting and machining, and PETT Certificate in fitting and machining. She has skills in areas such as plant maintenance, lathe and milling operations, pneumatics, hydraulics, and basic computer use.
Matthew McGuirke C.V.
This document contains a personal statement and CV for Matthew McGuirke. It summarizes his work experience in furniture removal, cleaning services, warehouse work, and automotive services. It also outlines his education including vocational training and qualifications in automotive maintenance and repair. Matthew indicates he is a hard worker, fast learner, and enjoys teamwork as well as independent work.
cv_doc
This document provides a curriculum vitae for Ahmed Elgorashi Ibrahim Makki, a mechanical engineer from Sudan. It includes his personal details, career objectives, education qualifications, skills, and previous work experience. His previous roles include working as a garage engineer and head of garage section for SPCC-southern province cement company in Saudi Arabia since 1998, where he supervised maintenance of over 120 heavy equipment vehicles and 100 light vehicles. Prior to this, he worked as a service engineer and maintenance engineer for engineering companies in Sudan, gaining experience in equipment maintenance, repair, and rebuilding.
CURRICULUM VITAE
Norris Chishimba is seeking a position as a Heavy Duty Engineer with Konkola Copper Mines. He has an Advanced Certificate in Heavy Equipment Repairs from Northern Technical College. His work experience includes internships at Konkola Copper Mines and Zalawi Haulage Limited where he performed equipment services, maintenance, and repairs. He is computer literate and holds additional qualifications including a Class C1 driver's license and certifications in occupational health and safety.
Martin Salmon a
Martin James Salmon has over 30 years of experience in aircraft engineering, training, and instruction. He has held roles as a Part 147 Training Manager, field service representative, instructor, senior maintenance engineer, and senior instructor. Salmon possesses extensive knowledge of aircraft like the EH101, Lynx, Super Lynx, Apache, B212, B412, AS350, and AS365. He has qualifications in instructional techniques and assessment and specializes in developing computer-based training and other multimedia learning packages.
Recommended
mark current cv
Mark Pritchard has over 25 years of experience working in the automotive industry as both a technician and trainer. He currently works as an automotive tutor and assessor, delivering training from level 2 to level 4 on topics such as engine management, electronic braking, and diagnostic systems. Pritchard is accredited to assess qualifications up to the level of Master Technician for HGVs and passenger vehicles. He has extensive experience diagnosing and repairing commercial vehicles, and enjoys maintaining his industry knowledge through research.
Curriculum vitae till of omar[1]
Mohammad Omar Mohammad Ali Al Reyalat is seeking a position as a maintenance manager. He has over 15 years of experience as a mechanic and maintenance assistant manager. He is proficient in English and Arabic and has received extensive technical training on engines, electronics systems, and vehicle maintenance.
ZAFAR IQBAL
Zafar Iqbal is a mechanical engineer seeking a challenging position in an efficient organization. He has a Bachelor's degree in Mechanical Engineering from Al-Khair University and diplomas in Mechanical Engineering. His work experience includes positions as a mechanical engineer for Yapi Merkezi in Saudi Arabia, Future Energy Alliance in the UAE, and Marian Mechanical Engineering and HMC Taxila in Pakistan. His responsibilities have included site inspections, preparing reports and method statements, quality control works, designing water tanks, and machining parts using lathes, mills, and other tools. He has skills in AutoCAD, MS Office, and mechanical systems for ships, engines, and factories.
CV_Paul Sanuya
Sanuya Paul is seeking employment as a mechanical fitter and machinist. She has over 15 years of work experience in palm oil and flour mills, including roles as an apprentice, tradesman, senior tradesman, and team leader. She currently works as a TVET mechanical school instructor. Paul has qualifications including a Certificate III in Engineering, Tradesman Certificate in maintenance fitting and machining, and PETT Certificate in fitting and machining. She has skills in areas such as plant maintenance, lathe and milling operations, pneumatics, hydraulics, and basic computer use.
Matthew McGuirke C.V.
This document contains a personal statement and CV for Matthew McGuirke. It summarizes his work experience in furniture removal, cleaning services, warehouse work, and automotive services. It also outlines his education including vocational training and qualifications in automotive maintenance and repair. Matthew indicates he is a hard worker, fast learner, and enjoys teamwork as well as independent work.
cv_doc
This document provides a curriculum vitae for Ahmed Elgorashi Ibrahim Makki, a mechanical engineer from Sudan. It includes his personal details, career objectives, education qualifications, skills, and previous work experience. His previous roles include working as a garage engineer and head of garage section for SPCC-southern province cement company in Saudi Arabia since 1998, where he supervised maintenance of over 120 heavy equipment vehicles and 100 light vehicles. Prior to this, he worked as a service engineer and maintenance engineer for engineering companies in Sudan, gaining experience in equipment maintenance, repair, and rebuilding.
CURRICULUM VITAE
Norris Chishimba is seeking a position as a Heavy Duty Engineer with Konkola Copper Mines. He has an Advanced Certificate in Heavy Equipment Repairs from Northern Technical College. His work experience includes internships at Konkola Copper Mines and Zalawi Haulage Limited where he performed equipment services, maintenance, and repairs. He is computer literate and holds additional qualifications including a Class C1 driver's license and certifications in occupational health and safety.
Martin Salmon a
Martin James Salmon has over 30 years of experience in aircraft engineering, training, and instruction. He has held roles as a Part 147 Training Manager, field service representative, instructor, senior maintenance engineer, and senior instructor. Salmon possesses extensive knowledge of aircraft like the EH101, Lynx, Super Lynx, Apache, B212, B412, AS350, and AS365. He has qualifications in instructional techniques and assessment and specializes in developing computer-based training and other multimedia learning packages.
My Resume
Karthikeyan S has over 14 years of experience in generator maintenance and repair. He has worked for companies in India, Iraq, Dubai, Mozambique, and Bangladesh servicing generators ranging from 30KVA to 1500KVA. Currently works for Aggreko UK Ltd in Dubai as a mechanic responsible for troubleshooting, maintenance, and repair of Cummins generators. He holds various certificates in Cummins engine maintenance and safety training.
Muhammad-Hunain
Muhammad Hunain is a Mechatronics Engineer with experience in automobiles, maintenance, engines, and suspension systems. He has a BS in Mechatronics from Indus University and qualifications in auto and diesel technology. Hunain has worked as a technician at Toyota Eastern Motors for 2 years where he maintained engines and performed overhauls. He also has experience working on chemical truck suspension systems and maintenance at Fauji Fertilizer Bin Qasim Ltd. Hunain has skills in MS Office, Multisim, Matlab, AutoCAD, and Mach3.
SMSB Profile
Santun Motivasi Sdn Bhd is a Malaysian company established in 2008 that specializes in trading mechanical and electrical parts for the crane and port industries. It aims to become a significant player in maintenance, repair, and overhaul for these industries. The company was originally founded for property investment but diversified into crane and port industries under new management. It is committed to delivering quality products on time to its clients.
Brian cashman CV
Brian Cashman has over 15 years of experience in mechanical engineering and manufacturing. He holds a BEng in Mechanical Engineering from Cork Institute of Technology and trade qualifications in mechanical work. Currently he works as a Mechanical Technician Engineer at Sanmina SCI in Fermoy, where his responsibilities include preventative maintenance, line changeovers, and process improvements. Previously he worked in tool fitting, quality control, and preventative maintenance at Cork Plastics in Little Island. He has received specialized training in various production technologies and holds cleanroom and manufacturing certifications.
Revised Mr Gaham Quirk CV (2)
Graham Quirk has over 30 years of experience in mechanics and logistics operations management. His most recent role was as Operations Maintenance Supervisor for Arabian Logistics in Oman from 2013 to 2015, where he oversaw rig movements and managed workshops. Prior to that, he worked as a Team Leader Vehicle Mechanic for the Commando Logistic Regiment in the UK from 2005 to 2013, repairing and maintaining military vehicles. Quirk has a variety of qualifications in mechanics, health and safety, and driving licenses.
fahd resume tech
Fahad Ali Faridi is seeking a career involving challenges and opportunities for development in his field. He has over 10 years of experience working in electrical maintenance for various companies. His responsibilities have included installing, configuring, and managing electrical equipment, as well as troubleshooting problems, testing systems, and ensuring safety. He has an in-progress B-Tech in electrical engineering and certifications in computer hardware and software.
gilbert cv
Gilbert M. Soriano is an experienced automotive technician from the Philippines seeking new employment opportunities. He has over 15 years of experience in automotive repair and maintenance, including expertise in engine repair, brakes, steering, suspension, and transmission systems. Soriano is proficient in problem-solving complex repair issues and has received extensive training and certifications in various automotive systems. He is currently employed as a specialist technician in Saudi Arabia but is interested in applying his skills in a new role.
Resume -RK
Raj Kumar Mann is a Training Manager at Air India Engineering Services Limited with over 30 years of experience in aviation maintenance and training. He has held roles as Training Manager, Chief Instructor, and Senior Instructor at various aviation companies. Mann has extensive experience developing and conducting training programs, maintaining training records, and assisting with regulatory documentation. He holds qualifications in engineering, management, auditing, and aviation maintenance.
real resume for ATI
Joshua Brennan is a former Navy serviceman seeking a position as a Production Employee at ATI Allvac. He has 10 years of experience in aircraft maintenance, including troubleshooting, equipment maintenance, tool control, safety training, and hazardous material handling. His experience includes roles as an aircraft mechanic for AECOM and the US Navy, where he maintained aircraft, completed inspections, and served as a lead petty officer. He is currently studying Mechanical Technology at Niagara County Community College with a goal of obtaining a BA in Mechanical Engineering.
hyd11
Mohammed Saleem is seeking a manager position that utilizes his management, supervision, and administrative skills. He has a diploma in mechanical engineering and over 21 years of experience in maintenance and workshop management roles. His experience includes over 11 years working in Saudi Arabia and positions as Maintenance Manager at United Office Systems Pvt Ltd and Workshop Manager at Alaa Industrial Equipment Factory in Jeddah, Saudi Arabia. He has extensive experience working with hydraulic and pneumatic systems, compressors, pumps and more.
Akram Shalabi Resume cv (1)
Akram Shalaby is a logistic manager with over 21 years of experience in logistics, customs clearance, and marine insurance in the automotive field in Kuwait. He has led logistics operations for two major automobile distributors. His experience includes managing teams to receive, store, and deliver large shipments of vehicles in tight timeframes while ensuring regulatory compliance. Currently he works as an assistant logistic manager for A.A.S. Automotive, the sole dealer of several luxury automotive brands in Kuwait, where he directs strategic logistics initiatives and manages day-to-day import/export processes.
Alan Johnson Resume
Alan K. Johnson is an experienced ex-military truck driver seeking a career in logistics. He has over 20 years of experience driving tractor-trailers and operating heavy vehicles while transporting a wide range of goods across 48 U.S. states. His resume highlights his extensive experience in logistics, hazardous materials handling, and supervising employees in warehousing and transportation roles.
John's Resume
Johnathan D. Hall is seeking a position in the transportation industry utilizing his experience as a truck driver and trainer. He has over 15 years of experience as a company driver delivering various cargos such as dry goods, liquids, and refrigerated products. Hall has trained new drivers, maintained safety and quality standards, and adhered to DOT regulations. He has a welding certificate and certifications in MIG, TIG, and stick welding.
LAUPA Mohe
Mohe Laupa has over 25 years of experience in the transport and logistics industry. He has held various roles such as Transport Supervisor at Linfox Logistics, Transport Manager at Transauck, and Metro Dispatcher at multiple companies. Currently, he is employed as a Transport Supervisor at Linfox Logistics where he coordinates container pick ups and deliveries and manages a team. Laupa has a Certificate in Journalism and Te Reo Maori from Waiariki Polytechnic and has worked in roles spanning rail, road, and maritime transport. He aims to succeed in all challenges and has a strong work ethic and communication skills.
Postal Service-48
This document is from the Naval Submarine Training Center Pacific regarding the Second Class Divers School. It provides information on diving and escape training and is dated June 24, 1977. The document number is INWD-WTCP-111-11-12-721.
Postal Service-45
Eric R. Broome worked as an electrician and electronic technician for the U.S. Postal Service from 1991 to 1987, where his responsibilities included maintenance, repair, and troubleshooting of electrical systems and computer equipment. He received over 2000 hours of training in electrical, electronic, and computer systems. He occasionally filled in as a maintenance supervisor overseeing 10 mechanics and 5 technicians.
Postal Service-44
This document provides a 116-hour training record for Eric R. Broome on the Mark II Facer-Canceler/Edger-Feeder Systems. The training covered safety procedures, equipment orientation, mechanical adjustments, and troubleshooting of power distribution, stopline, canceling, gating and LID circuits. Trainees practiced theoretical and hands-on troubleshooting using equipment manuals, schematics, and diagnostic tools. The goal was to teach maintenance procedures and electronic adjustments to ensure correct recognition, canceling and gating performance according to maintenance standards.
Postal Service-42
Mr. E. C. Broome completed a 116-hour training course on multi-position letter sorter machines at the Technical Center in Norman, Oklahoma from August 27th to September 3rd 1982. The course covered operation, maintenance, safety procedures, parts replacement, timing, troubleshooting, and preventive maintenance of letter sorter machines. The objectives of the course were to familiarize students with letter sorter machines and provide current information to establish fault recognition, logical troubleshooting procedures, and preventive maintenance standards to maintain the machines with minimum supervision.
Postal Service-40
The document summarizes a 36-hour training course completed by Mr. E.C. Broome on the Microprocessor-Controlled Mark II Facer Canceler System. The major elements of the course included safety training, orientation to system documentation, identification of components, and study of the power distribution, motor control, letter detection, stamp detection, FIM detection, canceling and sorting functions. Practical training involved using laboratory equipment to test the listed functions according to the operating and maintenance manual MS-69 Volume A provided to Mr. Broome.
Postal Service-38
Eric Broome completed a 116-hour training course in Advanced Digital Applications at the Technical Training Center in Norman, OK. The course covered topics such as logic trainer utilization, oscilloscope operation, digital circuitry including shift registers and counters, timing circuits, programming and interfacing peripheral devices, and safety. Broome received satisfactory marks and the training will help him in his role as a Maintenance Mechanic for the U.S. Postal Service.
Postal Service-37
This certificate certifies that E.C. Broom successfully completed an advanced digital applications course at the Postal Service's Technical Training Center on April 15, 1983. The course was offered by the Postal Service's Office of Training & Development.
Postal Service-36
Mr. E.C. Broome completed a 192-hour training course on E-COM equipment maintenance at the Technical Training Center in Norman, Oklahoma. The course provided in-depth knowledge on corrective maintenance and repair of mechanical items in E-COM serving post office mail processing equipment, including the AIM IV cutter/folder/enveloper, printer, and LA120-DA console. The training covered the operation, fault isolation, mechanical repair, and basic electrical circuits of each item.
More Related Content
What's hot
My Resume
Karthikeyan S has over 14 years of experience in generator maintenance and repair. He has worked for companies in India, Iraq, Dubai, Mozambique, and Bangladesh servicing generators ranging from 30KVA to 1500KVA. Currently works for Aggreko UK Ltd in Dubai as a mechanic responsible for troubleshooting, maintenance, and repair of Cummins generators. He holds various certificates in Cummins engine maintenance and safety training.
Muhammad-Hunain
Muhammad Hunain is a Mechatronics Engineer with experience in automobiles, maintenance, engines, and suspension systems. He has a BS in Mechatronics from Indus University and qualifications in auto and diesel technology. Hunain has worked as a technician at Toyota Eastern Motors for 2 years where he maintained engines and performed overhauls. He also has experience working on chemical truck suspension systems and maintenance at Fauji Fertilizer Bin Qasim Ltd. Hunain has skills in MS Office, Multisim, Matlab, AutoCAD, and Mach3.
SMSB Profile
Santun Motivasi Sdn Bhd is a Malaysian company established in 2008 that specializes in trading mechanical and electrical parts for the crane and port industries. It aims to become a significant player in maintenance, repair, and overhaul for these industries. The company was originally founded for property investment but diversified into crane and port industries under new management. It is committed to delivering quality products on time to its clients.
Brian cashman CV
Brian Cashman has over 15 years of experience in mechanical engineering and manufacturing. He holds a BEng in Mechanical Engineering from Cork Institute of Technology and trade qualifications in mechanical work. Currently he works as a Mechanical Technician Engineer at Sanmina SCI in Fermoy, where his responsibilities include preventative maintenance, line changeovers, and process improvements. Previously he worked in tool fitting, quality control, and preventative maintenance at Cork Plastics in Little Island. He has received specialized training in various production technologies and holds cleanroom and manufacturing certifications.
Revised Mr Gaham Quirk CV (2)
Graham Quirk has over 30 years of experience in mechanics and logistics operations management. His most recent role was as Operations Maintenance Supervisor for Arabian Logistics in Oman from 2013 to 2015, where he oversaw rig movements and managed workshops. Prior to that, he worked as a Team Leader Vehicle Mechanic for the Commando Logistic Regiment in the UK from 2005 to 2013, repairing and maintaining military vehicles. Quirk has a variety of qualifications in mechanics, health and safety, and driving licenses.
fahd resume tech
Fahad Ali Faridi is seeking a career involving challenges and opportunities for development in his field. He has over 10 years of experience working in electrical maintenance for various companies. His responsibilities have included installing, configuring, and managing electrical equipment, as well as troubleshooting problems, testing systems, and ensuring safety. He has an in-progress B-Tech in electrical engineering and certifications in computer hardware and software.
gilbert cv
Gilbert M. Soriano is an experienced automotive technician from the Philippines seeking new employment opportunities. He has over 15 years of experience in automotive repair and maintenance, including expertise in engine repair, brakes, steering, suspension, and transmission systems. Soriano is proficient in problem-solving complex repair issues and has received extensive training and certifications in various automotive systems. He is currently employed as a specialist technician in Saudi Arabia but is interested in applying his skills in a new role.
Resume -RK
Raj Kumar Mann is a Training Manager at Air India Engineering Services Limited with over 30 years of experience in aviation maintenance and training. He has held roles as Training Manager, Chief Instructor, and Senior Instructor at various aviation companies. Mann has extensive experience developing and conducting training programs, maintaining training records, and assisting with regulatory documentation. He holds qualifications in engineering, management, auditing, and aviation maintenance.
real resume for ATI
Joshua Brennan is a former Navy serviceman seeking a position as a Production Employee at ATI Allvac. He has 10 years of experience in aircraft maintenance, including troubleshooting, equipment maintenance, tool control, safety training, and hazardous material handling. His experience includes roles as an aircraft mechanic for AECOM and the US Navy, where he maintained aircraft, completed inspections, and served as a lead petty officer. He is currently studying Mechanical Technology at Niagara County Community College with a goal of obtaining a BA in Mechanical Engineering.
hyd11
Mohammed Saleem is seeking a manager position that utilizes his management, supervision, and administrative skills. He has a diploma in mechanical engineering and over 21 years of experience in maintenance and workshop management roles. His experience includes over 11 years working in Saudi Arabia and positions as Maintenance Manager at United Office Systems Pvt Ltd and Workshop Manager at Alaa Industrial Equipment Factory in Jeddah, Saudi Arabia. He has extensive experience working with hydraulic and pneumatic systems, compressors, pumps and more.
Akram Shalabi Resume cv (1)
Akram Shalaby is a logistic manager with over 21 years of experience in logistics, customs clearance, and marine insurance in the automotive field in Kuwait. He has led logistics operations for two major automobile distributors. His experience includes managing teams to receive, store, and deliver large shipments of vehicles in tight timeframes while ensuring regulatory compliance. Currently he works as an assistant logistic manager for A.A.S. Automotive, the sole dealer of several luxury automotive brands in Kuwait, where he directs strategic logistics initiatives and manages day-to-day import/export processes.
Alan Johnson Resume
Alan K. Johnson is an experienced ex-military truck driver seeking a career in logistics. He has over 20 years of experience driving tractor-trailers and operating heavy vehicles while transporting a wide range of goods across 48 U.S. states. His resume highlights his extensive experience in logistics, hazardous materials handling, and supervising employees in warehousing and transportation roles.
John's Resume
Johnathan D. Hall is seeking a position in the transportation industry utilizing his experience as a truck driver and trainer. He has over 15 years of experience as a company driver delivering various cargos such as dry goods, liquids, and refrigerated products. Hall has trained new drivers, maintained safety and quality standards, and adhered to DOT regulations. He has a welding certificate and certifications in MIG, TIG, and stick welding.
LAUPA Mohe
Mohe Laupa has over 25 years of experience in the transport and logistics industry. He has held various roles such as Transport Supervisor at Linfox Logistics, Transport Manager at Transauck, and Metro Dispatcher at multiple companies. Currently, he is employed as a Transport Supervisor at Linfox Logistics where he coordinates container pick ups and deliveries and manages a team. Laupa has a Certificate in Journalism and Te Reo Maori from Waiariki Polytechnic and has worked in roles spanning rail, road, and maritime transport. He aims to succeed in all challenges and has a strong work ethic and communication skills.
What's hot (14)
More from Eric Broome
Postal Service-48
This document is from the Naval Submarine Training Center Pacific regarding the Second Class Divers School. It provides information on diving and escape training and is dated June 24, 1977. The document number is INWD-WTCP-111-11-12-721.
Postal Service-45
Eric R. Broome worked as an electrician and electronic technician for the U.S. Postal Service from 1991 to 1987, where his responsibilities included maintenance, repair, and troubleshooting of electrical systems and computer equipment. He received over 2000 hours of training in electrical, electronic, and computer systems. He occasionally filled in as a maintenance supervisor overseeing 10 mechanics and 5 technicians.
Postal Service-44
This document provides a 116-hour training record for Eric R. Broome on the Mark II Facer-Canceler/Edger-Feeder Systems. The training covered safety procedures, equipment orientation, mechanical adjustments, and troubleshooting of power distribution, stopline, canceling, gating and LID circuits. Trainees practiced theoretical and hands-on troubleshooting using equipment manuals, schematics, and diagnostic tools. The goal was to teach maintenance procedures and electronic adjustments to ensure correct recognition, canceling and gating performance according to maintenance standards.
Postal Service-42
Mr. E. C. Broome completed a 116-hour training course on multi-position letter sorter machines at the Technical Center in Norman, Oklahoma from August 27th to September 3rd 1982. The course covered operation, maintenance, safety procedures, parts replacement, timing, troubleshooting, and preventive maintenance of letter sorter machines. The objectives of the course were to familiarize students with letter sorter machines and provide current information to establish fault recognition, logical troubleshooting procedures, and preventive maintenance standards to maintain the machines with minimum supervision.
Postal Service-40
The document summarizes a 36-hour training course completed by Mr. E.C. Broome on the Microprocessor-Controlled Mark II Facer Canceler System. The major elements of the course included safety training, orientation to system documentation, identification of components, and study of the power distribution, motor control, letter detection, stamp detection, FIM detection, canceling and sorting functions. Practical training involved using laboratory equipment to test the listed functions according to the operating and maintenance manual MS-69 Volume A provided to Mr. Broome.
Postal Service-38
Eric Broome completed a 116-hour training course in Advanced Digital Applications at the Technical Training Center in Norman, OK. The course covered topics such as logic trainer utilization, oscilloscope operation, digital circuitry including shift registers and counters, timing circuits, programming and interfacing peripheral devices, and safety. Broome received satisfactory marks and the training will help him in his role as a Maintenance Mechanic for the U.S. Postal Service.
Postal Service-37
This certificate certifies that E.C. Broom successfully completed an advanced digital applications course at the Postal Service's Technical Training Center on April 15, 1983. The course was offered by the Postal Service's Office of Training & Development.
Postal Service-36
Mr. E.C. Broome completed a 192-hour training course on E-COM equipment maintenance at the Technical Training Center in Norman, Oklahoma. The course provided in-depth knowledge on corrective maintenance and repair of mechanical items in E-COM serving post office mail processing equipment, including the AIM IV cutter/folder/enveloper, printer, and LA120-DA console. The training covered the operation, fault isolation, mechanical repair, and basic electrical circuits of each item.
Postal Service-34
This document provides a record of training completed by an individual for the Comprehensive Computer Forwarding System (CFS) Maintenance course. The 232-hour course covered introduction to CFS systems, NOVA 3/12 software and hardware, CRT 6052 displays, floppy diskette operations, and system fault isolation and repair. It was held at the Technical Training Center in Norman, Oklahoma and received a satisfactory rating.
Postal Service-32
Mr. E. R. Broome completed a 116-hour training course in Digital Computer Systems at the Technical Training Center in Norman, Oklahoma on January 27, 1984. The course covered major elements of computer hardware, computer architecture, computer software, and computers of the future. It provided instruction on topics such as computer definitions, memory concepts, flowcharting and algorithms, addressing modes, and Postal Service computer system applications.
Postal Service-30
Mr. E. R. Broome completed a 116-hour technical training course on the Multi-Position Flat Sorting System at the Technical Training Center in Norman, OK. The course covered computer diagnostics, file examinations, and diagnostic tests of the computer system and peripherals. Students received instruction on digital logic, signal flow, mechanical analysis, component identification and repair, and machine orientation including booting, loading, and start up. Each student was provided course materials to support the technical instructions.
Postal Service-28
This document provides a record of training for Eric R. Groome. It summarizes a 464 hour course on E-COM System Maintenance that was held at the Technical Training Center in Norman, Oklahoma. The major elements of the course included system description and operation, introductions to POP-11 processors and disk systems, POP-11 hardware and interface equipment, and communications controllers. The purpose of the course was to provide skills and knowledge to troubleshoot and repair E-COM Serving Post Office equipment to the component level.
Postal Service-25
The document is a certificate from the United States Postal Service Office of Training & Development Technical Training Center. It certifies that Eric R. Broome successfully completed a course in Bar Code Printer Maintenance in September 1985.
Postal Service-24
The document is a record of training for Eric R. Broome. It summarizes that he completed the E-COM System Maintenance Course at the Technical Training Center in Norman, OK on November 9, 1984. The 464-hour course covered topics like the PDP-11 processor, hardware, magnetic tape systems, terminals, and printers. It was designed to provide skills to troubleshoot and repair E-COM Serving Post Office equipment.
Postal Service-23
This document is a record of training completed by Eric R. Broome. It summarizes a 224 hour course on Phase II ECA OCRICS Maintenance that was completed at the Technical Training Center in Norman, OK. The course covered introduction to computers and peripherals, process control, mechanical and software control, electronics for various components, interface, verification, sorting and fault isolation procedures. It established proficiency in system-level maintenance up to board replacement using diagnostics, but did not include programming or circuit theory training.
Postal Service-21
Eric Broome completed a 72-hour training course on the Air Contract Data Collection System Maintenance at the Technical Training Center in Norman, Oklahoma. The course covered the introduction, computers, peripherals, scales, scanners, printers, conveyor systems, and telecommunications structures of the ACDeS. It was designed to provide technicians the technical knowledge to operate, perform preventive and corrective maintenance on, and logically troubleshoot system malfunctions of the ACDeS equipment.
Postal Service-19
Eric Broome completed a one hour Maintenance Safety Awareness Training Exemption Examination course at the Charlotte, NC postal installation on June 7, 1982. The course covered introduction to postal safety, work area safety, material handling hazards, equipment hazards, electrical hazards, hazards requiring standard personal protective equipment, and fire hazards. By satisfactorily completing the exemption examination, Eric demonstrated an appropriate knowledge of the major subject areas, equivalent to completing the full Maintenance Safety Awareness Training course.
Postal Service-18
Eric R. Broome completed the Fire Brigade Training Course at the PEDC in Charlotte, NC on 021503. The training consisted of a self-study program and hands-on training exercise to acquaint prospective postal fire brigade members with fire prevention, their responsibilities, and emergency response. The course enabled students to recognize the importance of teamwork, understand evacuation plans, identify and use fire equipment, stop the spread of fires, and assist in salvage and drill operations.
Postal Service-17
Eric Broome has been scheduled for a job interview on May 7, 1985 at 9:00am in the Conference Room of the Carolina District Office in Charlotte, North Carolina for the position of Building Management Assistant. The letter thanked Broome for applying to the EAS-17 position in Charlotte and provided the interview details. Broome was asked to contact the Acting SCD/Employee & Labor Relations if unable to attend or no longer interested in the role.
Postal Service-16
Eric R. Brooks received a letter notifying him of a quality step increase for his work at the United States Postal Service in Charlotte, NC. The increase was based on his job performance over the past year, as he competently completed tasks and discharged his duties. His services as a career employee are an asset to any organization. The letter, signed by Walter E. Crowe of the Sectional Center in Charlotte, expresses appreciation for Brooks' work.
More from Eric Broome (20)
Reliance-6
- 1. RELIANCE SCHOOL OF MOTORS AND DRIVES CERTIFICATE OF PROFICIENCY THIS ISTO CERTIFY THAT f£ric 2? 'Broome.... has completed the prescribed course of instruction at the Reliance/Rockwell Automation Training Center, in Greenville, South Carolina, and has successfully passed examinations in the subjects comprising the course, r sident ckwell Automation Dodge/Reliance Q.~£d'pDirector, School of Motors and Drives In witness whereof this certificate isissued this 20 day of .9Lugust in the year 1999 " Rockwell Automation