Rebuild damaged Marine Gear Box & Bearing Pocket
•
0 likes•333 views
A damaged marine gearbox bearing pocket was rebuilt using the Sterling brush plating process. Copper was applied to a thickness of 0.50mm and hand-blended to a diameter of 250mm to rebuild the pocket. A final nickel cap was added for a smooth finish, and the job was performed in situ.
Report
Share
Report
Share
Download to read offline
Recommended
Rebuild of Indentation on Yanmar Cylinder Head
The document discusses rebuilding a Yanmar cylinder head that had indentation issues. The cylinder head was rebuilt by applying a copper plating through a brush plating process, followed by hand blending and capping with nickel for the final finish. The process used was Sterling's brush plating process.
MMS for Hydroturbines
The document describes a machine monitoring solution that uses shaft vibration, speed and phase reference, digital axial position, and bearing vibration sensors to increase the availability, performance, and safety of operation for plants, processes, and machines. It monitors shaft vibration, position, bearing health, and uses the data for protection and references speed and phase.
Fluke 810-vibration-tester
The new Fluke 810 helps you locate and diagnose common mechanical problems and prioritize repair actions with no prior machine history
RISK BEARING AND MANAGEMENT IN ENTREPRENEURSHIP
This document discusses risk bearing and management in entrepreneurship. It defines risk as the possibility of suffering loss or injury, and notes that entrepreneurs take calculated moderate risks. The document identifies several types of risks entrepreneurs may face, such as pure risk and speculative risk. It also lists factors that entrepreneurial risk taking depends on, such as the degree of dissatisfaction with the current situation and orientation towards challenges. Finally, the document outlines the key steps in risk management for entrepreneurs, including identifying risks, analyzing them, evaluating risks, treating high risks, and ongoing monitoring.
Week 13 vibration measurements
This document discusses vibration measurement and analysis. It describes various types of vibration transducers that convert mechanical vibrations into electrical signals, including variable resistance, piezoelectric, electrodynamic, and LVDT transducers. It also discusses vibration pickups like vibrometers, accelerometers, and exciters. Dynamic testing is used to determine natural frequencies, damping, and mode shapes through modal testing or measure in-service loads through operational testing. The measurement signals are then conditioned and analyzed to study the vibration spectrum of machines and structures.
Enterpreneurship
This document discusses the concept of entrepreneurship and characteristics of entrepreneurs. It defines entrepreneurship as taking up new initiatives and organizing businesses. Key points made include:
- Entrepreneurs are innovative, willing to take risks and work hard. They are highly optimistic and independent.
- Common characteristics of entrepreneurs are a desire for achievement, adaptability, foresight and being a good organizer.
- Entrepreneurship in agriculture (agripreneurship) provides opportunities in areas like organic farming, food processing, floriculture and production of agro-inputs.
- Entrepreneurs differ from managers and leaders in that they create new opportunities and innovations, rather than maintaining or developing existing
Recommended
Rebuild of Indentation on Yanmar Cylinder Head
The document discusses rebuilding a Yanmar cylinder head that had indentation issues. The cylinder head was rebuilt by applying a copper plating through a brush plating process, followed by hand blending and capping with nickel for the final finish. The process used was Sterling's brush plating process.
MMS for Hydroturbines
The document describes a machine monitoring solution that uses shaft vibration, speed and phase reference, digital axial position, and bearing vibration sensors to increase the availability, performance, and safety of operation for plants, processes, and machines. It monitors shaft vibration, position, bearing health, and uses the data for protection and references speed and phase.
Fluke 810-vibration-tester
The new Fluke 810 helps you locate and diagnose common mechanical problems and prioritize repair actions with no prior machine history
RISK BEARING AND MANAGEMENT IN ENTREPRENEURSHIP
This document discusses risk bearing and management in entrepreneurship. It defines risk as the possibility of suffering loss or injury, and notes that entrepreneurs take calculated moderate risks. The document identifies several types of risks entrepreneurs may face, such as pure risk and speculative risk. It also lists factors that entrepreneurial risk taking depends on, such as the degree of dissatisfaction with the current situation and orientation towards challenges. Finally, the document outlines the key steps in risk management for entrepreneurs, including identifying risks, analyzing them, evaluating risks, treating high risks, and ongoing monitoring.
Week 13 vibration measurements
This document discusses vibration measurement and analysis. It describes various types of vibration transducers that convert mechanical vibrations into electrical signals, including variable resistance, piezoelectric, electrodynamic, and LVDT transducers. It also discusses vibration pickups like vibrometers, accelerometers, and exciters. Dynamic testing is used to determine natural frequencies, damping, and mode shapes through modal testing or measure in-service loads through operational testing. The measurement signals are then conditioned and analyzed to study the vibration spectrum of machines and structures.
Enterpreneurship
This document discusses the concept of entrepreneurship and characteristics of entrepreneurs. It defines entrepreneurship as taking up new initiatives and organizing businesses. Key points made include:
- Entrepreneurs are innovative, willing to take risks and work hard. They are highly optimistic and independent.
- Common characteristics of entrepreneurs are a desire for achievement, adaptability, foresight and being a good organizer.
- Entrepreneurship in agriculture (agripreneurship) provides opportunities in areas like organic farming, food processing, floriculture and production of agro-inputs.
- Entrepreneurs differ from managers and leaders in that they create new opportunities and innovations, rather than maintaining or developing existing
Vibration Monitoring
The document discusses vibration analysis techniques used for predictive maintenance. It begins with an introduction to SKF Reliability Systems and their network in Asia Pacific. It then covers maintenance philosophies focused on prevention rather than failure. Key concepts of vibration analysis are explained, including how measurements are performed, common measurement types and units, and analyzing vibration spectra. The document provides examples of vibration data and outlines how spectra are used to identify common machine faults.
Bearing failure and its Causes and Countermeasures
A brief review about bearing and failure of its various parts due to other possibilities than design such as manufacturing, improper service and handling and other similar aspects.
Vibration
This document discusses vibration monitoring and analysis. It defines vibration as the motion of mechanical parts back and forth from their neutral position, which is caused by induced forces and freedom of movement. Excessive vibration can have harmful effects like increased load on bearings, higher stresses on components, and reduced equipment efficiency. Common problems that cause vibration include unbalance, misalignment, looseness, and defects. Vibration monitoring involves measuring parameters like displacement, velocity, acceleration, and using tools like FFT analysis to identify frequencies associated with faults. Understanding phase and trends in vibration spectra over time helps with condition monitoring and predictive maintenance of machinery.
Sổ tay bảo dưỡng vòng bi của SKF - Vinamain
Tải miễn phí sổ tay bảo dưỡng vòng bi công nghiệp của SKF. Sổ tay bảo dưỡng vòng bi SKF là tài liệu hướng dẫn bảo dưỡng do SKF soạn thảo, với nội dung chỉ dẫn giúp bạn bảo dưỡng đúng cách, an toàn và chuyên nghiệp.
Vibration Monitoring
1) Unbalance, misalignment, looseness and resonance are some of the key machinery faults that cause vibration. Unbalance produces a 1X signal while misalignment produces both 1X and 2X signals.
2) Rolling element bearings produce characteristic frequencies including ball pass frequencies that can indicate inner or outer race damage. Journal bearings are more damped while rolling element bearings produce clearer fault frequencies.
3) Resonance occurs when the machine's operating speed matches its natural frequency, greatly increasing vibration. It requires additional testing like run up/coast down to diagnose.
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This workshop gives you a thorough understanding of electrical motor’s working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors.
You will gain a fundamental understanding of the installation, operation and troubleshooting of electric motors. Typical applications of electric motors in mining, manufacturing, materials handling, process control are covered in detail. You will learn the basic steps in specifying, installing, wiring and commissioning motors. The concluding section of the workshop gives you the fundamental tools in troubleshooting motors confidently and effectively.
MORE INFORMATION: http://www.idc-online.com/content/troubleshooting-maintenance-protection-ac-electrical-motors-and-drives-13
Vibration measuring instruments
This presentation gives the information about 'vibration measuring instruments' covering syllabus of Unit-5 of Theory of vibrations or mechanical vibrations for BE course under VTU, Belgaum. This presentation is prepared by Hareesha N G, Asst. Prof, Dept of Aerospace, DSCE, B'Lore-78.
Electrical maintenance-1
This document provides an overview of electrical maintenance, including definitions, types (preventive, operational, corrective), and examples of tasks. It discusses preventive maintenance strategies like reliability centered maintenance and scheduled inspection/testing of critical components. Specific preventive maintenance techniques are covered for both low and high voltage equipment, including infrared analysis, ultrasound leak detection, transformer oil testing, and polarization index testing. Operational maintenance is defined as care performed by operators during equipment use, while corrective maintenance focuses on repair after breakdown. Modern maintenance software programs are also noted.
An Introduction to Scanning Laser Vibrometry for Non-Contact Vibration Measur...
Learn about Polytec’s non-intrusive and highly productive vibration measurement technology for automated multi-point scanning of structures. The webinar will explain its application to aerospace, automotive, civil, biological, medical and micro- structures.
Topics Include:
- Concept and theory of 1D and 3D scanning vibrometry
- Technical advantages and limitations
- Productivity benefits
- Example applications including FEM validation, modal analysis, acoustics, NVH troubleshooting, automated 3D data acquisition with RoboVib and strain measurement
Mechanical Vibrations all slides
This document provides an introduction to mechanical vibrations. It discusses fundamentals such as single and multi degree of freedom systems, free and forced vibrations, harmonic and random vibrations. Examples of vibratory systems include vehicles, rotating machinery, musical instruments. Excessive vibrations can cause issues like noise, fatigue failure. The Tacoma Narrows bridge collapse and Millennium bridge vibrations are discussed. Harmonic motion and its characteristics such as amplitude, period, frequency, and phase are also introduced.
Detergent Market in India as of 2015 (Surf Excel, Ariel, Nirma, Wheel, Tide, ...
Porter's Five Forces, Porter's Generic Strategies, STP, Perceptual Map for all of the following.
1) Surf Excel vs. Ariel,
2) Nirma vs. Wheel,
3) Tide vs. Ghari
This .ppt originally contained video but I had to remove them due to size issues.
This presentation links all the above mentioned brands with Porter's 5 forces model and Porter's Generic Strategies.
Bearing Description about basic, types, failure causes
This document discusses different types of bearings. It begins by defining a bearing as a device that allows constrained relative motion between two parts, typically rotation or linear movement. It then classifies bearings based on the motions they allow and their principle of operation. The document goes on to describe various types of bearings in detail, including ball bearings, roller bearings, thrust bearings, tapered roller bearings, and cylindrical roller bearings. It provides information on the characteristics, advantages, applications, and physical features of each bearing type.
More Related Content
Viewers also liked
Vibration Monitoring
The document discusses vibration analysis techniques used for predictive maintenance. It begins with an introduction to SKF Reliability Systems and their network in Asia Pacific. It then covers maintenance philosophies focused on prevention rather than failure. Key concepts of vibration analysis are explained, including how measurements are performed, common measurement types and units, and analyzing vibration spectra. The document provides examples of vibration data and outlines how spectra are used to identify common machine faults.
Bearing failure and its Causes and Countermeasures
A brief review about bearing and failure of its various parts due to other possibilities than design such as manufacturing, improper service and handling and other similar aspects.
Vibration
This document discusses vibration monitoring and analysis. It defines vibration as the motion of mechanical parts back and forth from their neutral position, which is caused by induced forces and freedom of movement. Excessive vibration can have harmful effects like increased load on bearings, higher stresses on components, and reduced equipment efficiency. Common problems that cause vibration include unbalance, misalignment, looseness, and defects. Vibration monitoring involves measuring parameters like displacement, velocity, acceleration, and using tools like FFT analysis to identify frequencies associated with faults. Understanding phase and trends in vibration spectra over time helps with condition monitoring and predictive maintenance of machinery.
Sổ tay bảo dưỡng vòng bi của SKF - Vinamain
Tải miễn phí sổ tay bảo dưỡng vòng bi công nghiệp của SKF. Sổ tay bảo dưỡng vòng bi SKF là tài liệu hướng dẫn bảo dưỡng do SKF soạn thảo, với nội dung chỉ dẫn giúp bạn bảo dưỡng đúng cách, an toàn và chuyên nghiệp.
Vibration Monitoring
1) Unbalance, misalignment, looseness and resonance are some of the key machinery faults that cause vibration. Unbalance produces a 1X signal while misalignment produces both 1X and 2X signals.
2) Rolling element bearings produce characteristic frequencies including ball pass frequencies that can indicate inner or outer race damage. Journal bearings are more damped while rolling element bearings produce clearer fault frequencies.
3) Resonance occurs when the machine's operating speed matches its natural frequency, greatly increasing vibration. It requires additional testing like run up/coast down to diagnose.
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
It is estimated that electrical drives and other rotating equipment consume about 50% of the total electrical energy consumed in the world today. The cost of maintaining electrical motors can be a significant amount in the budget item of manufacturing and mining industries. This workshop gives you a thorough understanding of electrical motor’s working, maintenance and failure modes and gives you the tools to maintain and troubleshoot electrical motors.
You will gain a fundamental understanding of the installation, operation and troubleshooting of electric motors. Typical applications of electric motors in mining, manufacturing, materials handling, process control are covered in detail. You will learn the basic steps in specifying, installing, wiring and commissioning motors. The concluding section of the workshop gives you the fundamental tools in troubleshooting motors confidently and effectively.
MORE INFORMATION: http://www.idc-online.com/content/troubleshooting-maintenance-protection-ac-electrical-motors-and-drives-13
Vibration measuring instruments
This presentation gives the information about 'vibration measuring instruments' covering syllabus of Unit-5 of Theory of vibrations or mechanical vibrations for BE course under VTU, Belgaum. This presentation is prepared by Hareesha N G, Asst. Prof, Dept of Aerospace, DSCE, B'Lore-78.
Electrical maintenance-1
This document provides an overview of electrical maintenance, including definitions, types (preventive, operational, corrective), and examples of tasks. It discusses preventive maintenance strategies like reliability centered maintenance and scheduled inspection/testing of critical components. Specific preventive maintenance techniques are covered for both low and high voltage equipment, including infrared analysis, ultrasound leak detection, transformer oil testing, and polarization index testing. Operational maintenance is defined as care performed by operators during equipment use, while corrective maintenance focuses on repair after breakdown. Modern maintenance software programs are also noted.
An Introduction to Scanning Laser Vibrometry for Non-Contact Vibration Measur...
Learn about Polytec’s non-intrusive and highly productive vibration measurement technology for automated multi-point scanning of structures. The webinar will explain its application to aerospace, automotive, civil, biological, medical and micro- structures.
Topics Include:
- Concept and theory of 1D and 3D scanning vibrometry
- Technical advantages and limitations
- Productivity benefits
- Example applications including FEM validation, modal analysis, acoustics, NVH troubleshooting, automated 3D data acquisition with RoboVib and strain measurement
Mechanical Vibrations all slides
This document provides an introduction to mechanical vibrations. It discusses fundamentals such as single and multi degree of freedom systems, free and forced vibrations, harmonic and random vibrations. Examples of vibratory systems include vehicles, rotating machinery, musical instruments. Excessive vibrations can cause issues like noise, fatigue failure. The Tacoma Narrows bridge collapse and Millennium bridge vibrations are discussed. Harmonic motion and its characteristics such as amplitude, period, frequency, and phase are also introduced.
Detergent Market in India as of 2015 (Surf Excel, Ariel, Nirma, Wheel, Tide, ...
Porter's Five Forces, Porter's Generic Strategies, STP, Perceptual Map for all of the following.
1) Surf Excel vs. Ariel,
2) Nirma vs. Wheel,
3) Tide vs. Ghari
This .ppt originally contained video but I had to remove them due to size issues.
This presentation links all the above mentioned brands with Porter's 5 forces model and Porter's Generic Strategies.
Bearing Description about basic, types, failure causes
This document discusses different types of bearings. It begins by defining a bearing as a device that allows constrained relative motion between two parts, typically rotation or linear movement. It then classifies bearings based on the motions they allow and their principle of operation. The document goes on to describe various types of bearings in detail, including ball bearings, roller bearings, thrust bearings, tapered roller bearings, and cylindrical roller bearings. It provides information on the characteristics, advantages, applications, and physical features of each bearing type.
Viewers also liked (12)
Bearing failure and its Causes and Countermeasures
Bearing failure and its Causes and Countermeasures
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
Troubleshooting, Maintenance and Protection of AC Electrical Motors and Drives
An Introduction to Scanning Laser Vibrometry for Non-Contact Vibration Measur...
An Introduction to Scanning Laser Vibrometry for Non-Contact Vibration Measur...
Detergent Market in India as of 2015 (Surf Excel, Ariel, Nirma, Wheel, Tide, ...
Detergent Market in India as of 2015 (Surf Excel, Ariel, Nirma, Wheel, Tide, ...
Bearing Description about basic, types, failure causes
Bearing Description about basic, types, failure causes
Rebuild damaged Marine Gear Box & Bearing Pocket
- 1. Sterling® Brush Plating Process Damaged SCANA VOLDA marine gearbox bearing pocket was rebuilt with Copper to 0.50mm thickness and hand - blended to Ø250mm then Nickel cap for final finish. The job was perform INSITU.