The document summarizes information about Operation No. 4 METALEX, an industrial facility located in the Brezno Industrial Park in central Slovakia. It consists of four large production halls covering a total area of over 50,000 square meters. The facility has railway access and infrastructure to support heavy industry. It also has overhead cranes, maintenance workshops, and other support buildings. The document provides detailed specifications about each production hall, including their dimensions, entrance gates, cranes, and other auxiliary spaces. It aims to provide potential investors with information about the capabilities and infrastructure available at the METALEX facility.

1. OPERATION NO. 4
METALEX

2. 2
Brezno Industrial Park (so called Mostá-
reň Brezno) is located in the Central Slo-
vakia. The location major benefit is its
proximity and quick accessibility from
the neighbouring countries of Poland,
Ukraine, Hungary, Austria and the Czech
Republic.
The industrial park is connected to the
railway and road infrastructure. The re-
gional capital, Banská Bystrica is only 30
minutes away always easily accessible
by car. Banská Bystrica is connected
with the other centres: Bratislava and
Žilina by the highway R1. In the north
there is highway D1 connecting towns
Ružomberok - Prešov – Košice. The dri-
ving time to the north highway is about
40 minutes from the Brezno Industrial
Park.
The town of Brezno is known for the
number of qualified workers in the field
of engineering. There is an industrial
secondary school in the town of Brez-
no, and another secondary industrial
school is located nearby - specifically in
the village of Podbrezová, that educates
young people in the dual teaching pro-
cess in engineering study disciplines. By
saying this we point the fact that there
is number of qualified and educated
labour in the field of engineering and
heavy industry in the area of the town
Brezno.
BREZNO INDUSTRIAL PARK
Geographical location and accessibility
Distance to the biggest
centres
Brezno - Nitra
Brezno - Žilina
Brezno - Košice
Brezno - Bratislava
Brezno - Budapešť (HU)
Brezno - Viedeň (AU)
Brezno - Ostrava (CZ)
Brezno - Brno (CZ)
Brezno - Krakov (PL)
Travel time
in hours
1 hours 20 min.
2 hours
2 hours 15 min.
2 hours 30 min.
3 hours 20 min.
3 hours 30 min.
3 hours 30 min.
4 hours
3 hours 50 min.
Distance
in km
166 km
129 km
195 km
255 km
207 km
329 km
234 km
387 km
233 km
...................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................
...................................................................................................................................................................................................

3. 3

4. The facility of the company REA-S,
Operation no. 4 METALEX, located in
the Brezno Industrial Park, was built
and put into operation in 1988 as a „mi-
litary production hall“ where, during
the socialistic period (former plant of
Mostárne Brezno) were designed and
manufactured mobile pontoon bridges.
The production of bridges ended at the
turn of year 2019 and 2020.
The area is connected to the functional
railway junction. The railway track is the
company property and is connected to
the railway tracks of the nation provider
– ŽSR (Railways of the Slovak Republic).
The total length of the private railway is
exceeding 1.2 km. The railways are main-
tained and operational. The last railway
car is possible to be unloaded by exten-
ding the railway line outside the premi-
ses by a technological overlap of approx.
200 m.
BREZNO INDUSTRIAL PARK
Operation no. 4 METALEX
The hall no. 1 and hall no. 2 are separa-
ted by a wall made of the trapezoidal
sheets and there is the wall made of the
concrete panel between hall no. 2 and
hall no. 3. There is the internal transport
network – electric railway siding (with a
track gauge of 1500 mm) that connects
all the halls.
The operation hall no. 4 consists of four
halls, a separate gatehouse with a bar-
rier and a social building. There are four
separate housing units in the service
building (dress room, offices).
The service building and the substation
building will need refurbishment.
Operation no. 4 METALEX:
Total area 52,029 m2
Total resp. area 17,871 m2
Total unemployment. area 34,158 m2
Buildings:
Hall No. 1 - 4975 m2
Hall No. 2 - 3750 m2
Hall No. 3 - 3750 m2
Hall No. 4 - 3750 m2
Service building - 4 housing units
Gatehouse with a barrier
Technological background:
Internal railway track connected to state
railway junction
11 remote-controlled cranes, load capa-
city of 5-20 tons
Internal transport system with electric
railway siding with a gauge of 1500 mm
Substation building
Social background:
Office premises
Dressing room with washroom
WC
Dining room
Archive
4

5. 5
Hall no. 1
Hall no. 2
Hall no. 3
Hall no. 4

6. The hall No. 1 has the three entrance
gates, namely gate E1 (width of 4.15m,
height of 4.3m), E2 (width of 4.15m,
height of 4.3m), B2 (width of 3.6m,
height of 3.5m), that connects the road.
The gate E2 is equipped with the so-cal-
led “thermal sleeve”. The thermal sleeve
is used to relieve the temperature nonu-
niformity preventing the heated air in
the hall is being ventilated in the win-
ter months once a truck entering to the
hall.
There are three transit cargo gates
between hall no. 1 and hall no. 2 in the
workshop no. 4 METALEX - V1 (wid-
th of 4.15m, height of 4.2m), P1 (width
of 4.95m, height of 4.9m), V2 (width of
4.15m, height of 4.2m) and two standard
passenger crossings.
There are also two train crossing gates
wide of 5.2 m and high of 5 m.
There are four remotely controlled cra-
nes with a capacity of 20 tons, 5 tons, 20
tons and 5 tons in the hall no 1. The ma-
ximum possible lift of each of the men-
tioned cranes is 8 m.
BREZNO INDUSTRIAL PARK
Operation no. 4 METALEX: Hall no. 1
In addition to the benefits mentioned
above, the hall also offers floor-level of-
fice space with the size of 80 m2
. The
space has served as the shift foreman‘s
office (offices, WC, kitchen, storage are-
as). In addition, there are the separate
dressing rooms with the washroom and
separate men‘s and women‘s toilets
of the size of 63 m2
plus the additional
dressing rooms with the washroom, of
the size of 37 m2
.
Hall no. 1:
Length: 195 m
Width: 25 m
Area: 4975 m2
Height: 11.2 m
Height under the crane: 8m
Entrance hall gates and cargo gates:
Hall gate E1: 4.15 x 4.30 m
Hall gate E2: 4.15 x 4.30 m
Hall gate B2: 3.60 x 3.50 m
Cargo gate V1: 4.15 x 4.20 m
Cargo gate P1: 4.95 x 4.90 m
Cargo gate V2: 4.15 x 4.20 m
2x standard personal passage
Technological background:
Remotely controlled crane, capacity 20 t
Remotely controlled crane, capacity 5 t
Remotely controlled crane, capacity 20 t
Remotely controlled crane, capacity 5 t
Social background:
Office space 80 m2
with toilet and kitchen
Dressing room with washroom 63 m2
with a separate WC
Dressing room with washroom 37 m2
6

7. 7

8. Hall No. 2 is connected to the road via
entrance B3 (width of 3.6m, height of
3.5m).
There are three transit cargo gates - V1
(width of 4.15m, height of 4.2m), P1 (wid-
th of 4.95m, height of 4.9m), V2 (width
of 4.15m, height of 4.2m) and 2 standard
passenger crossings between hall no. 2
and hall no. 1 of the operation no. 4 (ME-
TALEX).
There are three remotely controlled cra-
nes with a capacity of 20 tons, 5 tons and
12.5 tons in the hall no. 2. The maximum
possible lift of each of the mentioned
cranes is 8 m.
BREZNO INDUSTRIAL PARK
Operation no. 4 METALEX: Hall no. 2
In addition to the benefits mentioned
above, the hall also offers spaces with
the total usable area of 150 m2, which
until now has served as an archive, a
common dining room and the direc-
tor‘s office, plus a separate toilet. In the
north-western part of the building the-
re is a maintenance workshop with the
area of 60 m2
.
Hall no. 2:
Length: 150 m
Width: 25 m
Area: 3750 m2
Height: 11.2 m
Height under the crane: 8m
Entrance hall gates and cargo gates:
Hall gate B3: 3.60 x 3.50 m
Cargo gate V1: 4.15 x 4.20 m
Cargo gate P1: 4.95 x 4.90 m
Cargo gate V2: 4.15 x 4.20 m
2x standard personal passage
Technological background:
Remotely controlled crane, capacity 20 t
Remotely controlled crane, capacity 5 t
Remotely controlled crane, capacity 12.5 t
Social background:
Office space 150 m2
archive, dining room, office,
WC
Workshop space 60 m2
8

9. 9

10. Hall No. 3 is connected to the road via
the entrance gate (width of 3.6m, height
of 3.5m).
There are three large transit cargo ga-
tes (in the hall no. 3), of which the smal-
lest - P2 has the width of 4.15m and the
height of 4.2m), plus there is one perso-
nal passage.
In hall no. 3 there are 3 remotely control-
led cranes with a capacity of 20 tons, 5
tons and 12.5 tons. The maximum pos-
sible lift of each of the mentioned cra-
nes is 8 m.
BREZNO INDUSTRIAL PARK
Operation no. 4 METALEX: Hall no. 3
On the sites of hall no. 3, there are other
useful premises - a maintenance work-
shop with an area of 70 m2, and on the
opposite north-west site of the hall the-
re are two handy warehouses with an
area of 150 m2
.
In addition to the benefits mentioned
above, the hall also offers spaces with
the total usable area of 150 m2, which
until now has served as an archive, a
common dining room and the direc-
tor‘s office, plus a separate toilet. In the
north-western part of the hall there is a
maintenance workshop with an area of
60 m2
.
Hall no. 3:
Length: 150 m
Width: 25 m
Area: 3750 m2
Height: 11.2 m
Height under the crane: 8m
Entrance hall gates and cargo gates:
Hall gate: 3.60 x 3.50 m
Cargo gate P2: 8.20 x 5.20 m
1x standard personal passage
Technological background:
Diaľkovo ovládaný žeriav, nosnosť 20 t
Diaľkovo ovládaný žeriav, nosnosť 5 t
Diaľkovo ovládaný žeriav, nosnosť 12.5 t
Social background:
Two handy warehouses of 150 m2
Workshop premises 70 m2
10

11. 11

12. Hall No. 4 is connected to the road via
an entrance gate (width of 3.6m, height
of 3.5m).
Hall no. 4 has one remotely controlled
crane with a capacity of 20 tons.
BREZNO INDUSTRIAL PARK
Operation no. 4 METALEX: Hall no. 4
On the north-western site of the hall
there are handy warehouses with a size
of 150 m2
. Along one half of the hall the-
re is another handy longitudinal ware-
house with an area of approx. 400 m2
.
Beneath this warehouse, there are the
civil defence shelters of the same size as
the hall itself.
On the top of the hall, there are two un-
finished office floors. In addition, these
is an uncover storage area of the total
size of approx. 400 m2
.
Hall no. 4:
Length: 150 m
Width: 25 m
Area: 3750 m2
Height: 11.2 m
Height under the crane: 8m
Entrance hall gates and cargo gates:
Entrance gate: 3.60 x 3.50 m
Technological background:
Remotely controlled crane, capacity 20 t
Social background:
Handy warehouses 150 m2
Longitudinal warehouse 400 m2
Underground shelters
of civil defence 400 m2
Open warehouses 400 m2
12

13. 13

14. The exclusive owner of the entire facility
is the company REA-S s.r.o.
The company REA-S s.r.o. has been ac-
ting in various areas of the Slovak in-
dustries and also abroad for more than
20 years and is the company with a sign
of professionalism, tradition and stabi-
lity. The result of well done work is po-
sitive references of satisfied clients and
business partners.
The company pillars are the sale of stain-
less steel material, pumping equipment
and fittings, as well as the implementa-
tion and service of machine technolo-
gies, which is provided by a team of ex-
perts with many years of experience. At
the same time, the company proves its
effort to further expansion and its effort
to develop sufficient business network.
Contacts
Currently, the company REA-S s.r.o. is a
stable partner for its customers in va-
rious industries and that not only in
Slovakia, but also abroad. The company
invests a lot of resources and efforts in
improving production and service, as
well as in business policy.
The company looks forward with op-
timism and vigour to remain a vibrant
and relevant, providing reliable and
effective solutions and products of the
highest quality.
Ing. Ján KÁN
kan@rea-s.sk
+421 907 088 888
• communication in Slovak and Rus-
sian language
Ing. Ján KÁN ml.
jankan@rea-s.sk
+421 908 855 433
• communication in Slovak and En-
glish language
Mgr. Matej HORSKÝ
horsky@rea-s.sk
+421 918 035 999
• communication in Slovak and Ger-
man language
14

15. 15

16. REA-S s.r.o.
Mostárenská 9, 977 56 Brezno
Slovak republic
Telefón: +421 48 3217 118 | Mobil: +421 911 969 387
E – mail: rea-s@rea-s.sk
www.rea-s.sk